ID23-2: an automated and high-performance microfocus beamline for macromolecular crystallography at the ESRF. Corrigendum.

A revised version of Table 2 of Nanao et al. [J. Synchrotron Rad. (2022). 29, 581-590] is provided.

ID23-2: an automated and high-performance microfocus beamline for macromolecular crystallography at the ESRF.

ID23-2 is a fixed-energy (14.2 keV) microfocus beamline at the European Synchrotron Radiation Facility (ESRF) dedicated to macromolecular crystallography. The optics and sample environment have recently been redesigned and rebuilt to take full advantage of the upgrade of the ESRF to the fourth generation Extremely Brilliant Source (ESRF-EBS). The upgraded beamline now makes use of two sets of compound refractive lenses and multilayer mirrors to obtain a highly intense (>1013 photons s-1) focused microbeam (minimum size 1.5 µm × 3 µm full width at half-maximum). The sample environment now includes a FLEX-HCD sample changer/storage system, as well as a state-of-the-art MD3Up high-precision multi-axis diffractometer. Automatic data reduction and analysis are also provided for more advanced protocols such as synchrotron serial crystallographic experiments.

ID30A-3 (MASSIF-3) - a beamline for macromolecular crystallography at the ESRF with a small intense beam.

ID30A-3 (or MASSIF-3) is a mini-focus (beam size 18 µm × 14 µm) highly intense (2.0 × 1013 photons s-1), fixed-energy (12.81 keV) beamline for macromolecular crystallography (MX) experiments at the European Synchrotron Radiation Facility (ESRF). MASSIF-3 is one of two fixed-energy beamlines sited on the first branch of the canted undulator setup on the ESRF ID30 port and is equipped with a MD2 micro-diffractometer, a Flex HCD sample changer, and an Eiger X 4M fast hybrid photon-counting detector. MASSIF-3 is recommended for collecting diffraction data from single small crystals (≤15 µm in one dimension) or for experiments using serial methods. The end-station has been in full user operation since December 2014, and here its current characteristics and capabilities are described.

ID30B - a versatile beamline for macromolecular crystallography experiments at the ESRF.

ID30B is an undulator-based high-intensity, energy-tuneable (6.0-20 keV) and variable-focus (20-200 µm in diameter) macromolecular crystallography (MX) beamline at the ESRF. It was the last of the ESRF Structural Biology Group's beamlines to be constructed and commissioned as part of the ESRF's Phase I Upgrade Program and has been in user operation since June 2015. Both a modified microdiffractometer (MD2S) incorporating an in situ plate screening capability and a new flexible sample changer (the FlexHCD) were specifically developed for ID30B. Here, the authors provide the current beamline characteristics and detail how different types of MX experiments can be performed on ID30B (http://www.esrf.eu/id30b).

MASSIF-1: a beamline dedicated to the fully automatic characterization and data collection from crystals of biological macromolecules.

MASSIF-1 (ID30A-1) is an ESRF undulator beamline operating at a fixed wavelength of 0.969 Å (12.8 keV) that is dedicated to the completely automatic characterization of and data collection from crystals of biological macromolecules. The first of the ESRF Upgrade MASSIF beamlines to be commissioned, it has been open since September 2014, providing a unique automated data collection service to academic and industrial users. Here, the beamline characteristics and details of the new service are outlined.

Reply to Ronsivalle, S.; Di Luca, M. Exploring the Choice of Graft Materials in Tympanoplasty: A Perspective on the Use of Temporalis Fascia and Cartilage Grafts. Comment on "Ferlito et al. Type 1 Tympanoplasty Outcomes between Cartilage and Temporal Fascia Grafts: A Long-Term Retrospective. J. Clin. Med. 2022, 11, 7000".

We sincerely appreciate the valuable insights Ronsivalle et al [...].

Concordance in bacterial colonization profiles between voice prostheses and oral microbiota post-laryngectomy: An experimental study.

OBJECTIVE: Knowledge about voice prosthesis microbial colonization is vital in laryngectomized patients' quality of life (QoL). Herein, we aimed to explore the relationship between oral microbial patterns, demographic variables and voice prosthesis performance. METHODS: Thirty laryngectomy patients were assessed for microbial colonization in their voice prostheses and oral cavities. Factors like age, proton pump inhibitor (PPI) usage, and alcohol consumption were considered. RESULTS: Participants' average age was 74.20 ± 7.31 years, with a majority on PPIs. Staphylococcus aureus was the most common bacterium in prostheses (53 %), followed by Pseudomonas aeruginosa (27 %). Candida albicans was the primary fungal colonizer (67 %). A statistically significant moderate correlation was found between fungal species before and after oral rinsing (p = 0.035, Phi=0.588, Cramer's V = 0.416). Voice prosthesis and oral cavity microbiota profiles showed significant concordance (kappa=0.315, p < 0.004). Among subgroup analyses, bacterial patterns of colonization did not significantly influence VHI (p = 0.9555), VrQoL (p = 0.6610), or SF-36 (p = 0.509) scores. Conversely, fungal patterns of VP colonization significantly impacted subjective voice scores, with Candida krusei demonstrating better VHI (35.25 ± 3.63 vs. 44.54 ± 6.33; p = 0.008), VrQoL (7.13 ± 1.69 vs. 10.73 ± 2.00; p = 0.001), and SF-36 (69.36 ± 7.09 vs. 76.50 ± 7.73; p = 0.051) scores compared to C. albicans. CONCLUSIONS: There was a significant correlation between the oral microbiota and voice prosthesis colonization. These insights can inform improved care strategies for voice prostheses, enhancing patient outcomes.

Upgraded ESRF BM29 beamline for SAXS on macromolecules in solution.

Small-angle X-ray scattering (SAXS) measurements of proteins in solution are becoming increasingly popular with biochemists and structural biologists owing to the presence of dedicated high-throughput beamlines at synchrotron sources. As part of the ESRF Upgrade program a dedicated instrument for performing SAXS from biological macromolecules in solution (BioSAXS) has been installed at the renovated BM29 location. The optics hutch has been equipped with new optical components of which the two principal elements are a fixed-exit double multilayer monochromator and a 1.1 m-long toroidal mirror. These new dedicated optics give improved beam characteristics (compared with the previous set-up on ID14-3) regarding the energy tunability, flux and focusing at the detector plane leading to reduced parasitic scattering and an extended s-range. User experiments on the beamline have been successfully carried out since June 2012. A description of the new BioSAXS beamline and the set-up characteristics are presented together with examples of obtained data.

ID29: a high-intensity highly automated ESRF beamline for macromolecular crystallography experiments exploiting anomalous scattering.

ID29 is an ESRF undulator beamline with a routinely accessible energy range of between 20.0 keV and 6.0 keV (λ = 0.62 Što 2.07 Å) dedicated to the use of anomalous dispersion techniques in macromolecular crystallography. Since the beamline was first commissioned in 2001, ID29 has, in order to provide an improved service to both its academic and proprietary users, been the subject of almost continuous upgrade and refurbishment. It is now also the home to the ESRF Cryobench facility, ID29S. Here, the current status of the beamline is described and plans for its future are briefly outlined.

Automation of sample mounting for macromolecular crystallography.

A standard sample holder and vial for cryocooled macromolecular crystals has been defined for use with robotic sample changers. This SPINE standard sample holder is a modified version, with added features and specifications, of sample holders in common use. In particular, the SPINE standard meets the precision required for automatic sample exchange and includes a cap that is identified by a two-dimensional datamatrix code as well as an optional vial. At the ESRF, the sample holder standard is in use with the EMBL/ESRF/BM14 robotic sample changer (SC3) which is installed on eight beamlines. The SC3 can hold up to 50 crystals stored in five baskets. A datamatrix reader in the SC3 ensures safe management of the sample flow and facilitates fully automatic screening and characterization of samples. Tools for handling and transporting 50 samples in a dry shipping dewar have been developed. In addition to the SC3, the SPINE sample holder is currently compatible with a number of other robotic sample changers.