The arterialised saphenous venous flow-through flap for managing the radial forearm free flap donor site.

BACKGROUND: The radial forearm fasciocutaneous flap (RFFF) is a workhorse flap, however concerns with donor site morbidity include tendon exposure, delayed wound healing, impaired sensitivity, and poor cosmesis, have seen it fall out of favor. We present a method of using an arterialised saphenous flow through flap to reconstruct the RFFF donor site. METHOD: A cohort study of six patients (five male, one female; mean age 59 [range 19-90]) who had their RFFF donor site reconstructed with an arterialised saphenous flow through flap is presented. The use of multiple peripheral efferent venous anastomoses, flap rotation 180 degrees prior to inset, and the ligation of intra-flap connecting veins were three modifications employed. Primary outcomes include complication rates. Secondary outcomes were patient reported outcome measures via the Michigan Hand Outcomes Questionnaire, and patency and flow through the flap. RESULTS: In all six cases, there was flap survival. RFFF dimensions ranging from lengths of 6-15 cm (mean 11.5 cm) and widths of 4-6 cm (mean 5.3 cm), with an average flap area of 58 cm2 (range 24-90). There were no total flap losses, one partial superficial flap loss and one minor donor site delayed healing, over a mean follow-up of 6 months (4-24 months). The average overall patient satisfaction was 91 on Michigan Hand Outcomes Questionnaire. Pain was well tolerated with a low average pain score of 15. CONCLUSION: The modified arterialised saphenous flow through flap is a useful option for reconstructing the soft tissue defect and reconstituting the radial artery after RFFF harvest.

Muscle versus fasciocutaneous free flaps in heel reconstruction: systematic review and meta-analysis.

BACKGROUND: Management of soft tissue injuries of the heel is challenging and the composition of free tissue transfer that provides optimal aesthetic and functional outcomes in heel reconstruction is not clear. While fasciocutaneous flaps may result in shear planes that cause instability with mobilization, insensate muscle flaps may not be able to withstand the pressures of weight bearing and thus ulcerate. METHODS: A systematic literature search was performed using Medline and PubMed databases. Primary outcome measures were time to mobilize, ulceration, revision or debulking surgery, and the requirement for specialized footwear. Analysis of pooled outcomes was undertaken using fixed-effects meta-analysis, calculating the incidence rate ratio for included articles. RESULTS: Overall 576 articles were identified; out of which 11 articles met the final inclusion criteria, detailing 168 free tissue transfers in 163 patients. The study size ranged from 4 to 72 cases. There was a trend toward higher rates of ulceration (17 vs. 26%), requirement for revision (23 vs. 31%), and the requirement for specialized footwear (35 vs. 56%) in muscle flaps, but these differences were not statistically significant. CONCLUSION: The current review provided a summary of reported outcomes of free heel reconstruction in the literature till date. With the current evidence largely limited to small cohort studies (level IV evidence), there were no significant differences found between reconstructive options. These findings serve as a call to action for more reconstructive surgeons to collaborate on multi-institutional prospective studies with robust outcomes assessment. As such, an ideal flap for reconstruction of the weight-bearing heel has not yet been made clear.

Developments in image-guided deep circumflex iliac artery flap harvest: a step-by-step guide and literature review.

PURPOSE: The deep circumflex iliac artery (DCIA) flap has evolved significantly over time in the intricacies of flap design and breadth of surgical application. This has been facilitated by advances in preoperative imaging and planning, in particular, computed tomographic angiography. Studies have highlighted that advanced imaging modalities and other technologies such as image-guided stereolithographic biomodeling can substantially improve flap planning, flap harvest, and operative outcomes. PATIENTS AND METHODS: The present report comprises a combined literature review and clinical cohort study of 20 consecutive patients to assess the modern technologies applied to DCIA flap planning and harvest. We have also described a step-by-step guide for the implementation of these techniques into clinical practice. RESULTS: The protocol for a single, standardized technique of computed tomographic angiography scanning is presented and was applied to a range of techniques in the preoperative planning of DCIA flaps. These include 1) bony and vascular imaging analysis of both donor and recipient sites, 2) stereolithographic "biomodeling" of both donor and recipient bony and vascular anatomy, and 3) the use of preoperative "virtual surgery" with image-guided stereotactic navigation. The application and role of each technique was explored. CONCLUSIONS: Modern imaging and stereolithographic techniques are innovations that can substantially improve surgical outcomes in DCIA flap surgery, such as has been highlighted in our clinical experience and in published studies. Notably, few outcome studies have been reported, and the need for larger case series and comparative studies is apparent.

Comparison of hamate versus second or third toe osteochondral graft using magnetic resonance imaging for reconstruction of proximal interphalangeal fracture-dislocations.

Hemi-hamate arthroplasty is a method used to reconstruct complex fracture-dislocations of the proximal interphalangeal joint of the fingers. Other graft sites, including the toe second and third phalanges, have been proposed as alternatives to hemi-hamate arthroplasty due to variable clinical outcomes and anatomy. Through a prospective magnetic resonance imaging (MRI)-based study in asymptomatic individuals, we aimed to characterize the anatomy of the proximal interphalangeal joint and compare this with the hamate, second and third toes to determine the closest anatomical match using pre-determined measurements. Our results show that the second and third toes have greater anatomical similarity to the proximal interphalangeal joint of the fingers compared to the hamate. High-resolution MRI is a reliable method of characterizing the anatomy of these structures and could be a useful clinical tool in determining reconstructive options in the management of this challenging injury.Level of evidence: II.

The vascular basis of the hemi-hamate osteochondral free flap. Part 2: surgical anatomy and clinical application.

PURPOSE: The free vascularised hemi-hamate flap combines the utility of providing a small osteochondral portion of hamate for reconstruction, while providing a means of vascularisation to preserve articular cartilage after transfer. In Part 1 of this series, we highlighted the vascular approaches to such a technique. The current study investigates the bony architecture of the hamate, with particular emphasis on its utility for a range of osteochondral defects in the hand. METHODS: A morphometric assessment of the hamate as a potential osteochondral flap donor site for resurfacing digital phalangeal heads (either total or unicondylar) and/or bases was thus undertaken. This anatomic study was undertaken using in vivo imaging performed for a range of clinical indications, with computed tomographic angiography (CTA) and digital subtraction angiography (DSA) of the upper limb included. Bony and vascular measurements and relationships were recorded and assessed both quantitatively and qualitatively. A clinical case is presented, highlighting the application of these measurements. RESULTS: The mean digital artery diameter was 0.7 mm with a mean distance between digital artery and interphalangeal joint surface (i.e. pedicle length) of 1.18 mm. Mean hamate dimensions comprised a transverse width 16.62 mm, lateral width of 14.29 mm and ridge height of 1.43 mm. Measurements of the phalangeal bases, condyles and total phalangeal heads were recorded, and the optimal hamate harvest approaches demonstrated. Despite perceived differences, in all cases there was statistical similarity demonstrated between the fragments. CONCLUSION: The hemi-hamate osteochondral flap can be applied to a range of osteochondral defects in the hand and may offer new options to the hand surgeon.

The vascular basis of the hemi-hamate osteochondral free flap. Part 1: vascular anatomy and clinical correlation.

PURPOSE: The treatment of comminuted fractures of the proximal interphalangeal joint is highly challenging due to the complexities of joint bio-mechanics and stability. The hemi-hamate osteochondral auto-graft has been popularised in this role, able to replace articular loss and restore joint stability. Recent evaluation of their long-term follow-up however has shown the early development of osteoarthritis and potential early cartilage loss, which may be due to the non-vascularised nature of the graft. We offer a new technique that maintains vascularisation of the transferred hamate fragment, and investigate the anatomical vascular basis for the technique. METHODS: Dissection and angiographic studies of ten cadaveric specimens were undertaken, exploring the vascular anatomy of the dorsal hamate. A clinical case of hemi-hamate osteochondral free flap is presented, including preoperative, intraoperative and postoperative investigation of the relevant vasculature. RESULTS: Cadaveric studies demonstrated dorsal vascular supply to the hamate from the central of three dorsal carpal arches. The arch was supplied by the dorsal branch of the ulnar artery. Multiple supracapsular veins are present for use in flap venous drainage. This vascular pattern was found to be constant. A clinical case of hemi-hamate osteochondral free flap harvest demonstrated the same vascular anatomy intraoperatively. The digital artery was used as a recipient for microvascular anastomosis. Postoperative computed tomographic angiography and nuclear bone scan confirmed flap perfusion. CONCLUSIONS: The hemi-hamate osteochondral flap has a reliable anatomical vascular basis, and is clinically feasible as a technique for early vascularisation of the osteochondral fragment to sustain the transferred articular cartilage.

Panuveitis in Sweet syndrome.

Ocular manifestations of Sweet syndrome, or acute febrile neutrophilic dermatosis, are usually limited to the anterior segment. We report the case of a patient with bilateral panuveitis and retinal vasculitis associated with Sweet syndrome. A 45-year-old Asian female with an undiagnosed febrile illness with rash presented with bilateral panuveitis with haemorrhagic occlusive retinal vasculitis. Skin biopsy confirmed Sweet Syndrome. Intraocular inflammation resolved with a combination of topical and systemic corticosteroids as well as intravenous cyclophosphamide, with resulting permanent severe right visual impairment. Although an uncommon condition, Sweet syndrome should be considered in any febrile patient with skin lesions and uveitis.

Does Delay to Theater Lead to Increased Infection Rates in Hand Trauma? A Retrospective Cohort Study.

BACKGROUND: In an ideal health system, traumatic wounds would be surgically managed within 24 hours; however, resource constraints result in patients with open wounds commonly waiting much longer for surgery. Does this result in increased morbidity? This study compares infection rates over time for patients who received operative management of traumatic hand injuries. METHODS: A retrospective analysis was undertaken of patients admitted between July 2014 and June 2015 who presented within 24 hours of sustaining a hand injury and subsequently underwent operative repair. Patient and injury data were collected from arrival time at emergency departments across 3 Victorian metropolitan hospitals within the same network. Admission and outpatient follow-up of these patients was reviewed for signs of infection and treatment with antibiotics. RESULTS: Six hundred thirty-eight patients met inclusion criteria, 8 of the 429 patients treated within 24 hours of presentation developed an infection (1.86%) compared with 11 of the 209 patients treated after 24 hours of presentation (5.26%). Using Fisher's exact analysis, a statistically significant association was identified (P = 0.024). An odds ratio of 2.924 was calculated, with a number needed to harm of 26. When time was analyzed as a continuous variable using logistic regression, there was no statistical significance. CONCLUSION: This study shows some evidence that a timing may be important to reduce the rates of infection and raises the possibility that there may be a double peak for infection risk at the 6-hour and 24-hour marks. This gives a basis of potential further study.

3D Printed Models of Cleft Palate Pathology for Surgical Education.

To explore the potential viability and limitations of 3D printed models of children with cleft palate deformity. BACKGROUND: The advantages of 3D printed replicas of normal anatomical specimens have previously been described. The creation of 3D prints displaying patient-specific anatomical pathology for surgical planning and interventions is an emerging field. Here we explored the possibility of taking rare pediatric radiographic data sets to create 3D prints for surgical education. METHODS: Magnetic resonance imaging data of 2 children (8 and 14 months) were segmented, colored, and anonymized, and stereolothographic files were prepared for 3D printing on either multicolor plastic or powder 3D printers and multimaterial 3D printers. RESULTS: Two models were deemed of sufficient quality and anatomical accuracy to print unamended. One data set was further manipulated digitally to artificially extend the length of the cleft. Thus, 3 models were printed: 1 incomplete soft-palate deformity, 1 incomplete anterior palate deformity, and 1 complete cleft palate. All had cleft lip deformity. The single-material 3D prints are of sufficient quality to accurately identify the nature and extent of the deformities. Multimaterial prints were subsequently created, which could be valuable in surgical training. CONCLUSION: Improvements in the quality and resolution of radiographic imaging combined with the advent of multicolor multiproperty printer technology will make it feasible in the near future to print 3D replicas in materials that mimic the mechanical properties and color of live human tissue making them potentially suitable for surgical training.