Combining Electrospun Fiber Mats and Bioactive Coatings for Vascular Graft Prostheses.

The patency of small-diameter (<6 mm) synthetic vascular grafts (VGs) is still limited by the absence of a confluent, blood flow-resistant monolayer of endothelial cells (ECs) on the lumen and of vascular smooth muscle cell (VSMC) growth into the media layer. In this research, electrospinning has been combined with bioactive coatings based on chondroitin sulfate (CS) to create scaffolds that possess optimal morphological and bioactive properties for subsequent cell seeding. We fabricated random and aligned electrospun poly(ethylene terephthalate), ePET, mats with small pores (3.2 ± 0.5 or 3.9 ± 0.3 µm) and then investigated the effects of topography and bioactive coatings on EC adhesion, growth, and resistance to shear stress. Bioactive coatings were found to dominate the cell behavior, which enabled creation of a near-confluent EC monolayer that resisted physiological shear-flow conditions. CS is particularly interesting since it prevents platelet adhesion, a key issue to avoid blood clot formation in case of an incomplete EC monolayer or partial cell detachment. Regarding the media layer, circumferentially oriented nanofibers with larger pores (6.3 ± 0.5 µm) allowed growth, survival, and inward penetration of VSMCs, especially when the CS was further coated with tethered, oriented epithelial growth factor (EGF). In summary, the techniques developed here can lead to adequate scaffolds for the luminal and media layers of small-diameter synthetic VGs.

In Vitro and Pilot In Vivo Evaluation of a Bioactive Coating for Stent Grafts Based on Chondroitin Sulfate and Epidermal Growth Factor.

PURPOSE: To evaluate the potential of a bioactive coating based on chondroitin sulfate (CS) and tethered epidermal growth factor (EGF) for improvement of healing around stent grafts (SGs). MATERIALS AND METHODS: The impact of the bioactive coating on cell survival was tested in vitro on human vascular cells using polyethylene terephthalate films (PET) as a substrate. After being transferred onto a more "realistic" material (expanded polytetrafluoroethylene [ePTFE]), the durability and mechanical behavior of the coating and cell survival were studied. Preliminary in vivo testing was performed in a canine iliac aneurysm model reproducing type I endoleaks (three animals with one control and one bioactive SG for each). RESULTS: CS and EGF coatings significantly increased survival of human smooth muscle cells and fibroblasts compared with bare PET or ePTFE (P < .05). The coating also displayed good durability over 30 days according to enzyme-linked immunosorbent assay and cell survival tests. The coating did not affect mechanical properties of ePTFE and was successfully transferred onto commercial SGs for in vivo testing. No difference was observed on computed tomography and macroscopic examinations in endoleak persistence at 3 months, but the bioactive coating deposited on the abluminal surface of the SG (exposed to the vessel wall) increased the percentage of healed tissue in the aneurysm. No adverse effect, such as neointima formation or thrombosis, was observed. CONCLUSIONS: The bioactive coating promoted in vitro cell survival, displayed good durability, and was successfully transferred onto a commercial SG. Preliminary in vivo results suggest improved healing around bioactive SGs.

Chondroitin sulfate coatings display low platelet but high endothelial cell adhesive properties favorable for vascular implants.

This study highlights the advantages of chondroitin sulfate (CS) as a sublayer combining selective low-fouling properties, low-platelet adhesion and pro-adhesive properties on endothelial cells, making CS promising for vascular graft applications. These properties were evaluated by comparing CS with well-known low-fouling coatings such as poly(ethylene glycol) (PEG) and carboxymethylated dextran (CMD), which were covalently grafted on primary amine-rich plasma polymerized (LP) films. Protein adsorption studies by quartz crystal microbalance with dissipation monitoring (QCM-D) and fluorescence measurements showed that CS is as effective as PEG in reducing fibrinogen adsorption (~90% reduction). CS also largely reduced adsorption of bovine serum albumin (BSA) as well as fetal bovine serum (FBS) but to a lower extent than PEG and CMD surfaces (72% vs 85% for BSA and 66% vs 89% for FBS). Whole blood perfusion assays indicated that, while LP surfaces were highly reactive with platelets, PEG, CMD, and CS grafted surfaces drastically decreased platelet adhesion and activation to levels significantly lower than polyethylene terephthalate (PET) surfaces. Finally, while human umbilical vein endothelial cell (HUVEC) adhesion and growth were found to be very limited on PEG and CMD, they were significantly increased on CS compared to that on bare PET and reached similar values as those for tissue culture polystyrene positive controls. Interestingly, HUVEC retention during perfusion with blood was found to be excellent on CS but poor on PET. Overall, our results suggest that the CS surface has the advantage of promoting HUVEC growth and resistance to flow-induced shear stress while preventing fibrinogen and platelet attachment. Such a nonthrombogenic but endothelial-cell adhesive surface is thus promising to limit vascular graft occlusion.

Controlled co-immobilization of EGF and VEGF to optimize vascular cell survival.

Growth factors (GFs) are potent signaling molecules that act in a coordinated manner in physiological processes such as tissue healing or angiogenesis. Co-immobilizing GFs on materials while preserving their bioactivity still represents a major challenge in the field of tissue regeneration and bioactive implants. In this study, we explore the potential of an oriented immobilization technique based on two high affinity peptides, namely the Ecoil and Kcoil, to allow for the simultaneous capture of the epidermal growth factor (EGF) and the vascular endothelial growth factor (VEGF) on a chondroitin sulfate coating. This glycosaminoglycan layer was selected as it promotes cell adhesion but reduces non-specific adsorption of plasma proteins. We demonstrate here that both Ecoil-tagged GFs can be successfully immobilized on chondroitin sulfate surfaces that had been pre-decorated with the Kcoil peptide. As shown by direct ELISA, changing the incubation concentration of the various GFs enabled to control their grafted amount. Moreover, cell survival studies with endothelial and smooth muscle cells confirmed that our oriented tethering strategy preserved GF bioactivity. Of salient interest, co-immobilizing EGF and VEGF led to better cell survival compared to each GF captured alone, suggesting a synergistic effect of these GFs. Altogether, these results demonstrate the potential of coiled-coil oriented GF tethering for the co-immobilization of macromolecules; it thus open the way to the generation of biomaterials surfaces with fine-tuned biological properties. STATEMENT OF SIGNIFICANCE: Growth factors are potent signaling molecules that act in a coordinated manner in physiological processes such as tissue healing or angiogenesis. Controlled coimmobilization of growth factors on biomaterials while preserving their bioactivity represents a major challenge in the field of tissue regeneration and bioactive implants. This study demonstrates the potential of an oriented immobilization technique based on two high affinity peptides to allow for the simultaneous capture of epidermal growth factor (EGF) and vascular endothelial growth factor (VEGF). Our system allowed an efficient control on growth factor immobilization by adjusting the incubation concentrations of EGF and VEGF. Of salient interest, co-immobilizing of specific ratios of EGF and VEGF demonstrated a synergistic effect on cell survival compared to each GF captured alone.

Additive benefits of chondroitin sulfate and oriented tethered epidermal growth factor for vascular smooth muscle cell survival.

An anti-apoptotic coating combining chondroitin sulfate (CS) and coiled-coil-based tethering of epidermal growth factor (EGF) is designed for vascular applications. The oriented tethering strategy enables to reach higher EGF surface densities compared to the commonly used random covalent grafting, while using much lower concentrations of EGF during incubation. It also significantly improves vascular smooth muscle cell (VSMC) survival and resistance to apoptosis in serum-free conditions. The comparison of CS and low-fouling carboxymethylated dextran as a sublayer for growth factors highlights the tremendous benefit of CS thanks to its selective protein resistance and good cell adhesion properties. This approach can be tuned by capturing other growth factors on CS through coiled-coil interactions.

Chondroitin sulfate and epidermal growth factor immobilization after plasma polymerization: a versatile anti-apoptotic coating to promote healing around stent grafts.

Bioactive coatings constitute an interesting approach to enhance healing around implants, such as stent-grafts used in endovascular aneurysm repair. Three different plasma techniques, namely NH3 plasma functionalization and atmospheric- or low-pressure plasma polymerization, are compared to create amino groups and covalently bind CS and EGF bioactive molecules on PET. The latter presents the greatest potential. CS + EGF coating is shown to strongly decrease cell apoptosis and cell depletion in serum-free medium, while increasing cell growth compared to unmodified PET. This versatile biomimetic coating holds promise in promoting vascular repair around stent-grafts, where resistance to apoptosis is a key issue.