Catalyst-Free Transfer Hydrogenation from Amine-Borane Small Oligomers.

Amine-borane dimers and oligomers with varied steric and electronic profiles were prepared via capping agent-controlled AA/BB polycondensations. They were used for transfer hydrogenations to aldehydes, ketones, imines as well as electron-poor alkene/alkyne moieties. The amine-borane Lewis-paired oligomers and the congested bis(amine-borane)s provided the highest yields. This was likely helped by facilitated dissociation (oligomers) or H-bond assistance. In the case of the oligomers, the second equivalent of H2 present was also engaged in the reaction. Solid-state NMR characterization provides evidence that the boron-containing materials obtained after transfer dehydrogenation are highly similar to those obtained from thermal dehydrogenation. The oligomers bridge the gap between simple amine-borane molecular reductants and the poly-amine-boranes and provide a full picture of the reactivity changes at the different scales.

In Situ Monitoring of Latex Film Formation by Small-Angle Neutron Scattering: Evolving Distributions of Hydrophilic Stabilizers in Drying Colloidal Films.

The distribution of hydrophilic species, such as surfactants, in latex films is of critical importance for the performance of adhesives, coatings, and inks, among others. However, the evolution of this distribution during the film formation process and in the resulting dried films remains insufficiently elucidated. Here, we present in situ (wet) and ex situ (dry) small-angle neutron scattering (SANS) experiments that follow the film formation of two types of latex particles, which differ in their stabilizer: either a covalently bonded poly(methacrylic acid) (PMAA) segment or a physically adsorbed surfactant (sodium dodecyl sulfate, SDS). By fitting the experimental SANS data and combining with gravimetry experiments, we have ascertained the hydrophilic species distribution within the drying film and followed its evolution by correlating the size and shape of stabilizer clusters with the drying time. The evolution of the SDS distribution over drying time is being driven by a reduction in the interfacial free energy. However, the PMAA-based stabilizer macromolecules are restricted by their covalent bonding to core polymer chains and hence form high-surface area disclike phases at the common boundary between particles and PMAA micelles. Contrary to an idealized view of film formation, PMAA does not remain in the walls of a continuous honeycomb structure. The results presented here shed new light on the nanoscale distribution of hydrophilic species in drying and ageing latex films. We provide valuable insights into the influence of the stabilizer mobility on the final structure of latex films.

The Effect of Hydrophile Topology in RAFT-Mediated Polymerization-Induced Self-Assembly.

Polymerization-induced self-assembly (PISA) was employed to compare the self-assembly of different amphiphilic block copolymers. They were obtained by emulsion polymerization of styrene in water using hydrophilic poly(N-acryloylmorpholine) (PNAM)-based macromolecular RAFT agents with different structures. An average of three poly (ethylene glycol acrylate) (PEGA) units were introduced either at the beginning, statistically, or at the end of a PNAM backbone, resulting in formation of nanometric vesicles and spheres from the two former macroRAFT architectures, and large vesicles from the latter. Compared to the spheres obtained with a pure PNAM macroRAFT agent, composite macroRAFT architectures promoted a dramatic morphological change. The change was induced by the presence of PEGA hydrophilic side-chains close to the hydrophobic polystyrene segment.

Amphiphilic polyoxometalates for the controlled synthesis of hybrid polystyrene particles with surface reactivity.

Amphiphilic organo-polyoxometalates (POMs) used in the radical emulsion polymerization of styrene allowed the preparation in aqueous medium of stable 50-100 nm polystyrene-POM composite latexes. Thanks to the presence of a trithiocarbonate group in the POM amphiphile, POMs could be covalently linked to the polymer particle surface. The chemical and catalytic integrity of the POMs was confirmed, and the POM-mediated surface photoactivity of the latexes was demonstrated by the spatially controlled nucleation of silver nanoparticles at the periphery of the composites.

New Insight into Cluster Aggregation Mechanism during Polymerization-Induced Self-Assembly by Molecular Dynamics Simulation.

Investigations of polymerization-induced self-assembly in emulsion were conducted using molecular dynamics simulations. Using umbrella sampling and the weighted histogram analysis method algorithm, we calculated the interaction free energy between different self-assembled copolymer aggregates. In the presence of poly(ethylene glycol) (PEG) side chains at 80 °C, an attractive interaction between the copolymer micelles is observed. This attractive well is followed, in some case, by a repulsive barrier depending on the position of the PEG side chains. The strength of this repulsive barrier controls the aggregation kinetics: a strong repulsive barrier leads to slower aggregation rate and thus larger and denser clusters (i.e., reaction-limited cluster aggregation). These clusters then coalesce into large vesicles due to the presence of interstitial water molecules in the cluster. Inversely, a weak repulsive barrier causes rapid aggregation, which gives loose and ramified clusters (i.e., diffusion-limited cluster aggregation) that coalesce after swelling with a hydrophobic monomer, leading to tubular nanostructures and small vesicles. This new mechanism approach can explain the change of morphology from spheres to fibers and vesicles depending on the polymer architecture in the case of polymerization-induced self-assembly (PISA) in emulsion.

Enhanced Water Barrier Properties of Surfactant-Free Polymer Films Obtained by MacroRAFT-Mediated Emulsion Polymerization.

The presence of low-molar-mass surfactants in latex films results in detrimental effects on their water permeability, gloss, and adhesion. For applications such as coatings, there is a need to develop formulations that do not contain surfactants and have better water barrier properties. Having previously reported the synthesis of surfactant-free latex particles in water using low amounts (<2 wt %) of chains synthesized by controlled radical polymerization (Lesage de la Haye et al. Macromolecules 2017, 50, 9315-9328), here we study the water barrier properties of films made from these particles and their application in anticorrosion coatings. When films cast from aqueous dispersions of acrylate copolymer particles stabilized with poly(sodium 4-styrenesulfonate) (PSSNa) were immersed in water for 3 days, they sorbed only 4 wt % water. This uptake is only slightly higher than the value predicted for the pure copolymer, indicating that the negative effects of any particle boundaries and hydrophilic-stabilizing molecules are minimal. This sorption of liquid water is 5 times lower than what is found in films cast from particles stabilized with the same proportion of poly(methacrylic acid) (PMAA), which is more hydrophilic than PSSNa. In water vapor with 90% relative humidity, the PSSNa-based film had an equilibrium sorption of only 4 wt %. A small increase in the PMAA content has a strong and negative impact on the barrier properties. Nuclear magnetic resonance relaxometry on polymer films after immersion in water shows that water clusters have the smallest size in the films containing PSSNa. Furthermore, these films retain their optical clarity during immersion in liquid water for up to 90 min, whereas all other compositions quickly develop opacity ("water whitening") as a result of light scattering from sorbed water. This implies a remarkably complete coalescence and a very small density of defects, which yields properties matching those of some solvent-borne films. The latex stabilized with PSSNa is implemented as the binder in a paint formulation for application as an anticorrosive barrier coating on steel substrates and evaluated in accelerated weathering and corrosion tests. Our results demonstrate the potential of self-stabilized latex particles for the development of different applications, such as waterborne protective coatings and pressure-sensitive adhesives.

pH-Switchable Stratification of Colloidal Coatings: Surfaces "On Demand".

Stratified coatings are used to provide properties at a surface, such as hardness or refractive index, which are different from underlying layers. Although time-savings are offered by self-assembly approaches, there have been no methods yet reported to offer stratification on demand. Here, we demonstrate a strategy to create self-assembled stratified coatings, which can be switched to homogeneous structures when required. We use blends of large and small colloidal polymer particle dispersions in water that self-assemble during drying because of an osmotic pressure gradient that leads to a downward velocity of larger particles. Our confocal fluorescent microscopy images reveal a distinct surface layer created by the small particles. When the pH of the initial dispersion is raised, the hydrophilic shells of the small particles swell substantially, and the stratification is switched off. Brownian dynamics simulations explain the suppression of stratification when the small particles are swollen as a result of reduced particle mobility, a drop in the pressure gradient, and less time available before particle jamming. Our strategy paves the way for applications in antireflection films and protective coatings in which the required surface composition can be achieved on demand, simply by adjusting the pH prior to deposition.

Synthesis of Well-Defined Dawson-Type Poly(N,N-diethylacrylamide) Organopolyoxometalates.

An organotin-substituted Dawson-type phosphotungstate was covalently linked to a trithiocarbonate group by postfunctionalization methods. This organopolyoxometalate led to a series of polyoxometalate (POM)-poly(N,N-diethylacrylamide) hybrids in a controlled way through reversible addition-fragmentation chain transfer (RAFT) polymerization. Detailed comparison with and without the presence of POMs revealed that they do not profoundly disturb the RAFT mechanism, despite their oxidative power. The molar masses of the polymers were in the range of 10 to 100 kg mol-1 and molar mass dispersities of the composites were low (Mw /Mn <1.5). The POM building block in the hybrids retained the photocatalytic reactivity of the parent Dawson polyanion [P2 W18 O62 ]6- . Smaller, more homogeneous, and colloidally more stable silver nanoparticles were formed with the covalently linked POM-polymer compound than with its single unbound components.