Self-adaptive integration of photothermal and radiative cooling for continuous energy harvesting from the sun and outer space.

The sun (∼6,000 K) and outer space (∼3 K) are two significant renewable thermodynamic resources for human beings on Earth. The solar thermal conversion by photothermal (PT) and harvesting the coldness of outer space by radiative cooling (RC) have already attracted tremendous interest. However, most of the PT and RC approaches are static and monofunctional, which can only provide heating or cooling respectively under sunlight or darkness. Herein, a spectrally self-adaptive absorber/emitter (SSA/E) with strong solar absorption and switchable emissivity within the atmospheric window (i.e., 8 to 13 µm) was developed for the dynamic combination of PT and RC, corresponding to continuously efficient energy harvesting from the sun and rejecting energy to the universe. The as-fabricated SSA/E not only can be heated to ∼170 °C above ambient temperature under sunshine but also be cooled to 20 °C below ambient temperature, and thermal modeling captures the high energy harvesting efficiency of the SSA/E, enabling new technological capabilities.

Ultrahigh Effective Diffusion in Oxide by Engineering the Interfacial Transporter Channels.

Mass storage and removal in solids always play a vital role in technological applications such as modern batteries and neuronal computations. However, they were kinetically limited by the slow diffusional process in the lattice, which made it challenging to fabricate applicable conductors with high electronic and ionic conductivities at room temperature. Here, we proposed an acid solution/WO3/ITO sandwich structure and achieved ultrafast H transport in the WO3 layer by interfacial job-sharing diffusion, which means the spatially separated transport of the H+ and e- in different layers. From the color change of WO3, the effective diffusion coefficient (Deff) was estimated, dramatically increasing ≤106 times and overwhelming values from previous reports. The experiments and simulations also revealed the universality of extending this approach to other atoms and oxides, which could stimulate systematic studies of ultrafast mixed conductors in the future.

Multiscale Relaxation Behavior of Amorphous Plasticized Poly(vinyl butyral).

As a key component in laminated glass, plasticized polyvinyl butyral (PVB) interlayer is a kind of impact-resistant polymer material with high toughness. Recently, by using ultrasmall angle X-ray scattering (USAXS) technique, Stretch-induced phase-separated structure on the scale of hundreds of nanometers formed in plasticized PVB for the first time is reported. In this work, the multiscale relaxation behavior of plasticized PVB is further investigated. The relaxation behavior of deformed plasticized PVB is studied from macroscopic stress, mesoscopic phase-separated structure, and microscopic chain segment by combining USAXS, and birefringence with in situ stretching device. The contributions of chain segments and hydrogen bonding clusters for the multiscale relaxation behavior are discussed.

Shear banding in monodisperse polymer melt.

We performed a series of molecular dynamics simulations on monodisperse polymer melts to investigate the formation of shear banding. Under high shear rates, shear banding occurs, which is intimately accompanied by the entanglement heterogeneity. Interestingly, the same linear relationship between the end-to-end distance Ree and entanglement density Z is observed at homogeneous flow before the onset of shear banding and at the shear banding state, where Ree ∼ ln(Wi0.87)-ξ0Z is proposed as the criterion to describe the dynamic force balance of the molecular chain in flow with a high rate. Deviating from this relation leads to a force imbalance and results in the emergence of shear banding. We establish a scaling relation between the disentanglement rate Vd and the Weissenberg number Wi as Vd∼Wi0.87 for stable flow in homogeneous shear and shear banding states. The formation of shear banding prevents chains from further stretching and disentanglement. The transition from homogeneous shear to shear banding partially dissipates the increased free energy from shear and reduces the free energy of the system.

Programming colloidal bonding using DNA strand-displacement circuitry.

As a strategy for regulating entropy, thermal annealing is a commonly adopted approach for controlling dynamic pathways in colloid assembly. By coupling DNA strand-displacement circuits with DNA-functionalized colloid assembly, we developed an enthalpy-mediated strategy for achieving the same goal while working at a constant temperature. Using this tractable approach allows colloidal bonding to be programmed for synchronization with colloid assembly, thereby realizing the optimal programmability of DNA-functionalized colloids. We applied this strategy to conditionally activate colloid assembly and dynamically switch colloid identities by reconfiguring DNA molecular architectures, thereby achieving orderly structural transformations; leveraging the advantage of room-temperature assembly, we used this method to prepare a lattice of temperature-sensitive proteins and gold nanoparticles. This approach bridges two subfields: dynamic DNA nanotechnology and DNA-functionalized colloid programming.

Mesoscale bicontinuous networks in self-healing hydrogels delay fatigue fracture.

Load-bearing biological tissues, such as muscles, are highly fatigue-resistant, but how the exquisite hierarchical structures of biological tissues contribute to their excellent fatigue resistance is not well understood. In this work, we study antifatigue properties of soft materials with hierarchical structures using polyampholyte hydrogels (PA gels) as a simple model system. PA gels are tough and self-healing, consisting of reversible ionic bonds at the 1-nm scale, a cross-linked polymer network at the 10-nm scale, and bicontinuous hard/soft phase networks at the 100-nm scale. We find that the polymer network at the 10-nm scale determines the threshold of energy release rate G0 above which the crack grows, while the bicontinuous phase networks at the 100-nm scale significantly decelerate the crack advance until a transition Gtran far above G0 In situ small-angle X-ray scattering analysis reveals that the hard phase network suppresses the crack advance to show decelerated fatigue fracture, and Gtran corresponds to the rupture of the hard phase network.

Polymer crystallization under external flow.

The general aspects of polymer crystallization under external flow, i.e., flow-induced crystallization (FIC) from fundamental theoretical background to multi-scale characterization and modeling results are presented. FIC is crucial for modern polymer processing, such as blowing, casting, and injection modeling, as two-third of daily-used polymers is crystalline, and nearly all of them need to be processed before final applications. For academics, the FIC is intrinsically far from equilibrium, where the polymer crystallization behavior is different from that in quiescent conditions. The continuous investigation of crystallization contributes to a better understanding on the general non-equilibrium ordering in condensed physics. In the current review, the general theories related to polymer nucleation under flow (FIN) were summarized first as a preliminary knowledge. Various theories and models, i.e., coil-stretch transition and entropy reduction model, are briefly presented together with the modified versions. Subsequently, the multi-step ordering process of FIC is discussed in detail, including chain extension, conformational ordering, density fluctuation, and final perfection of the polymer crystalline. These achievements for a thorough understanding of the fundamental basis of FIC benefit from the development of various hyphenated rheometer, i.e., rheo-optical spectroscopy, rheo-IR, and rheo-x-ray scattering. The selected experimental results are introduced to present efforts on elucidating the multi-step and hierarchical structure transition during FIC. Then, the multi-scale modeling methods are summarized, including micro/meso scale simulation and macroscopic continuum modeling. At last, we briefly describe our personal opinions related to the future directions of this field, aiming to ultimately establish the unified theory of FIC and promote building of the more applicable models in the polymer processing.

Inducing nano-confined crystallization in PLLA and PET by elastic melt stretching.

Based on the widely studied poly(l-lactic acid) (PLLA) and polyethylene terephthalate (PET) that are brittle in their fully crystalline form, this Letter shows that they can be made to be super ductile, heat resistant and optically clear by creating nano-sized crystals while preserving the entanglement network. Atomic force microscopic images confirm the perceived nano-confined crystallization. Time-resolved X-ray scattering/diffraction measurements reveal the emergence of cold crystallization during either stress relaxation from large stepwise melt-stretching or annealing of pre-melt-stretched PLLA and PET above Tg. Mechanical tests show that these polymers in such a new state are rigid even well above Tg, e.g., at 100 °C.

Recent advances in post-stretching processing of polymer films with in situ synchrotron radiation X-ray scattering.

The stretch-induced structural evolution mechanism is a long-standing scientific question in the post-stretching processing of polymer films. X-ray scattering, especially a combination of small- and wide-angle X-ray scattering (SAXS/WAXS), provides a powerful method to study the hierarchical structure of polymer films. Recent advances in synchrotron radiation (SR) light sources and detection techniques allow one to measure the structural evolution of polymer films during post-stretching processing in real time with ultrahigh time resolution, which benefits the understanding on this topic. This review summarizes some recent investigations on post-stretching processing of polymer films, which combine in situ X-ray scattering techniques with purposely designed tensile apparatus in terms of three aspects: uniaxial stretching, biaxial stretching and stretching with chemical reactions. Concerning the polymer bulk, traditional deformation mechanisms like stretch-induced crystallization (SIC), crystal slipping, phase transition and melting-recrystallization are discussed for the uniaxial and biaxial post-stretching of polymer films. New deformation models have been developed to focus on the structural evolution on the length scale of lamellar stacks, which consider the potential microphase separation of the interlamellar amorphous phase and microbuckling. For solution systems, the coupled effects of the mechanical work from external force and the chemical potential from possible chemical reactions are taken into account for the structural evolution during stretching in solution. Roadmaps of structural and morphological evolution in the processing parameter space (i.e., temperature, stress, strain and the concentration of additive in the bath solution) are eventually constructed for precursor films. The accumulation of a structural evolution database for post-stretching processing of polymer films can be expected to provide a helpful guide for industrial processing for high-performance polymers in the near future.

Reconstructing the mechanical response of polybutadiene rubber based on micro-structural evolution in strain-temperature space: entropic elasticity and strain-induced crystallization as the bridges.

Strain-induced crystallization (SIC) in polybutadiene rubber (BR) was studied by in situ synchrotron radiation wide-angle X-ray diffraction (SR-WAXD) over a broad temperature range (-90 °C → 25 °C). Depending on the presence or absence of SIC and quiescent crystallization temperature, three temperature regions are divided. Detailed structural evolution is summarized in the strain-temperature space. Based on this micro-structural evolution information, the macroscopic mechanical response of BR, together with poly(isobutylene-isoprene) rubber (IIR) and natural rubber (NR), is reproduced based on Flory's and Plagge's theories. The origins of the mismatch of calculated and experimental stress-strain curves, especially in the large strain region, are discussed, and are mainly ascribed to the micro-macro connection approach and the network inhomogeneity.

Multiscale and Multistep Ordering of Flow-Induced Nucleation of Polymers.

Flow-induced crystallization (FIC) is a typical nonequilibrium phase transition and a core industry subject for the largest group of commercially useful polymeric materials: semicrystalline polymers. A fundamental understanding of FIC can benefit the research of nonequilibrium ordering in matter systems and help to tailor the ultimate properties of polymeric materials. Concerning the crystallization process, flow can accelerate the kinetics by orders of magnitude and induce the formation of oriented crystallites like shish-kebab, which are associated with the major influences of flow on nucleation, that is, raised nucleation density and oriented nuclei. The topic of FIC has been studied for more than half a century. Recently, there have been many developments in experimental approaches, such as synchrotron radiation X-ray scattering, ultrafast X-ray detectors with a time resolution down to the order of milliseconds, and novel laboratory devices to mimic the severe flow field close to real processing conditions. By a combination of these advanced methods, the evolution process of FIC can be revealed more precisely (with higher time resolution and on more length scales) and quantitatively. The new findings are challenging the classical interpretations and theories that were mostly derived from quiescent or mild-flow conditions, and they are triggering the reconsideration of FIC foundations. This review mainly summarizes experimental results, advances in physical understanding, and discussions on the multiscale and multistep nature of oriented nuclei induced by strong flow. The multiscale structures include segmental conformation, packing of conformational ordering, deformation on the whole-chain scale, and macroscopic aggregation of crystallites. The multistep process involves conformation transition, isotropic-nematic transition, density fluctuation (or phase separation), formation of precursors, and shish-kebab crystallites, which are possible ordering processes during nucleation. Furthermore, some theoretical progress and modeling efforts are also included.

Revealing the detailed structure in flow-induced crystallization of semicrystalline polymers.

We systematically investigate the detailed structure in the flow-induced crystallization of a lightly cross-linked high-density polyethylene as a model semicrystalline polymer sample by combining the small-angle X-ray scattering (SAXS) and the spherical harmonic expansion (SHE) method. The SHE divides the two-dimensional SAXS pattern into several components according to the deformation geometry, and allows extraction of the most relevant information. Employing the first two anisotropic components in the expansion and a comprehensive model, we determine the crystalline morphological parameters, such as the long period, the lamellar diameter and thickness, and their polydispersities. In particular, we find that the lamellar diameter exhibits bimodal distributions at high strains. Lamellae with similar diameters tend to gather rather than to randomly distribute with others, suggesting the existence of heterogeneity in the semicrystalline structure. Moreover, we observe the strong polydispersities of the lamellar structure at low strains. The structural heterogeneity and polydispersities could be related to the inhomogeneities in crystal growth and nucleation processes.

Numerical calculation of free-energy barriers for entangled polymer nucleation.

The crystallization of entangled polymers from their melt is investigated using computer simulation with a coarse-grained model. Using hybrid Monte Carlo simulations enables us to probe the behavior of long polymer chains. We identify solid-like beads with a centrosymmetry local order parameter and compute the nucleation free-energy barrier at relatively high supercooling with adaptive-bias windowed umbrella sampling. Our results demonstrate that the critical nucleus sizes and the heights of free-energy barriers do not significantly depend on the molecular weight of the polymer; however, the nucleation rate decreases with the increase in molecular weight. Moreover, an analysis of the composition of the critical nucleus suggests that intra-molecular growth of the nucleated cluster does not contribute significantly to crystallization for this system.

Manipulation of Chain Entanglement and Crystal Networks of Biodegradable Poly(butylene adipate-co-butylene terephthalate) During Film Blowing through the Addition of a Chain Extender: An In Situ Synchrotron Radiation X-ray Scattering Study.

One prerequisite for the large-scale application of biodegradable polymers is the manipulation of macroscopic performances of commercially available biopolymers during processing according to different real service requirements. Herein, the microstructural evolution of poly(butylene adipate-co-butylene terephthalate) (PBAT) modified by chain extender during film blowing was investigated by in situ synchrotron radiation X-ray scattering to unveil the origin of different performances. The chain dynamics difference induced by the chain extender was first characterized by the rheological measurement and 1H Multiple Quantum (MQ) NMR. It shows that the terminal relaxation is significantly slowed down, while the locally segmental dynamics is not apparently changed. With the assistance of the custom-built film blowing apparatus, the microstructure right above the die exit (D = 13-165 mm) was in situ, simultaneously captured by small- and wide-angle scattering (SAXS/WAXS), where four distinct regimes can be defined. Only the PBAT melt signals are found in regime I, whereas the formation of the mesomorphic domains as shown by the SAXS streaks appearing in regime II. The crystal shows up in regime III, where the WAXS signal appears. A dramatic increment of the crystallinity is found in regime III, which contributes to the continuous increasing bubble modulus with the formation of the crystal-based network. Such a crystal-based network is filled with crystals in regime IV, where the diameter of the PBAT bubble remains constant. The addition of the chain extender is found to significantly influence the structural evolution within different regimes. These dynamics and structure information could supply general guidance for bubble stability improvement and modification of macroscopic performances of biodegradable polymer products.

In situ characterization of strain-induced crystallization of natural rubber by synchrotron radiation wide-angle X-ray diffraction: construction of a crystal network at low temperatures.

Strain-induced crystallization (SIC) of natural rubber (NR) at descending temperatures as low as -60 °C is systematically investigated by in situ synchrotron radiation wide-angle X-ray diffraction (SR-WAXD) measurement. The detailed structural evolution of NR during SIC is studied in the strain-temperature space, where up to four regions are defined depending on the SR-WAXD results. In region I, the molecular chains begin to be oriented under tensile loading. The onset of crystallization happens in the very beginning of region II, and the NR crystal acts as a new physical cross-linking point to form a crystal network, namely the series model. The further increment of crystallinity (> ca. 8%) leads to the transition of the crystal network from the series model to the parallel model in region III. The crystal network is finally accomplished in region IV, where the crystallinity remains almost constant. Interestingly, regions III and IV exist only in the intermediate-temperature zone II (-40 °C to -10 °C), which are missing in zones I (-10 °C to 25 °C) and III (-60 °C to -40 °C). This suggests that sufficient crystallinity (χII-III > ca. 8%) is required to form the parallel model. The new crystal network provides a deep understanding of SIC of NR considering the microscopic features, i.e. oriented amorphous component, the onset of crystallization and crystallinity evolution and its correlation with the macroscopic stress-strain curve.

Counterion-Induced Nanosheet-to-Nanofilament Transition of Lyotropic Bent-Core Liquid Crystals.

The smart flexibility of phase transitions in liquid crystals (LCs) makes them suitable for various applications and is an important research field in contemporary science, engineering, and technology. Unlike most reports focused on bent-core LCs in the thermotropic situation, in our present study, we designed and synthesized a fully rigid bent-core molecule with the sulfonic acid group replacing conventional flexible chains. A rich variety of counterion-induced supramolecular LC phase behaviors have been systematically investigated. It was found that the smectic phase with nanosheets tends to transform to the hexagonal phase with nanofilaments when the protons of the sulfonic acid group are partially replaced by alkali metal ions. The experimental results show that the nanoaggregate and phase transition are controlled by the displacing ratio of alkali metal ions rather than the molecular concentration. Another interesting feature is that the achiral bent-core molecules self-assemble into columns by helical stacking and present macroscopic chirality, indicating that spontaneous chiral symmetry breaking occurs in the columnar phase. The fully rigid bent-core molecules reveal surprisingly hierarchical molecular self-assemblies with the smectic-to-hexagonal phase transition, which was not previously observed in supramolecular complexes. The findings will provide new possibilities for applications in LC-based photonic devices, biosystem switches, and supramolecular actuators.

Stretch-induced complexation reaction between poly(vinyl alcohol) and iodine: an in situ synchrotron radiation small- and wide-angle X-ray scattering study.

Fibrillation and the complexation reaction between poly(vinyl alcohol) (PVA)-iodine (i) complexes have been studied with in situ synchrotron radiation small- and wide-angle X-ray scattering (SAXS and WAXS) during the uniaxial stretching of PVA films in KI/I2 aqueous solution. SAXS results show that stretching induces the formation of nanofibrils, which pack periodically in the later stage of stretching with an average inter-fibrillar distance of around 10 nm. The onset strains for fibrillation and the appearance of periodicity of nanofibrils are located at the beginning and the end of the stress plateau, and decrease with increasing iodine concentration. In the stretching process as a whole, the presence of iodine ions reduces the crystallinity of the PVA crystal but favors the formation of a PVA-I complex. The complexation reaction is promoted by the synergistic effect of stretch and iodine ions, during which stretching drives the formation of polyiodine via the effect of entropic reduction while iodine concentration dictates crystallization of PVA-I3- co-crystals through the role of chemical potential. A morphological and structural phase diagram is constructed in the strain-iodine concentration space, which defines the regions for fibrillation and complexation reactions and may serve as a roadmap for the industrial processing of PVA polarizer.

Flow-induced density fluctuation assisted nucleation in polyethylene.

The nucleation processes of polyethylene under quiescent and shear flow conditions are comparatively studied with all-atom molecular dynamics simulations. Under both conditions, nucleation is demonstrated to be a two-step process, which, however, proceeds via different intermediate orders. Quiescent nucleation is assisted by local order structures, while flow-induced nucleation is promoted by density fluctuation, which is a coupling effect of conformational and orientational orderings. Flow drives the transformation from flexible chains to conformational ordered segments and circumvents the entropic penalty, which is the most peculiar and rate-limited step in polymer crystallization. This work suggests that the acceleration of the nucleation rate in orders of magnitude by flow is mainly attributed to the different kinetics pathway via conformational/orientational ordering-density fluctuation-nucleation.

Lyotropic meso-phase behavior of supra-molecular nanotubes with helical charge distribution.

We report diverse meso-phase arrangements of supra-molecular nanotubes assembled by ionic benzene-1,3,5-tricarboxamide (BTA) molecules in water; their transition pathway and equilibrium structure are controlled by the helical structure. Besides, the different sensitivity to the condition of initial solutions is revealed for the final rectangular phase and the intermediate phase.

Structural and morphological transitions in extension-induced crystallization of poly(1-butene) melt.

Structural and morphological transitions of flow-induced crystallization (FIC) in poly(1-butene) (PB-1) melt have been studied by combining extensional rheology and in situ synchrotron radiation ultrafast wide- and small-angle X-ray scattering (WAXD/SAXS) measurements. Unexpectedly, metastable Form III is crystallized directly from the PB-1 melt by high-speed extension, which has a short lifetime of several tens of milliseconds and manifests the thermodynamic and kinetic competition among Form III, Form II and melt under flow. Relative crystallinity evolution of Form II after extension reveals a crystal melting dominated process within the observation time of 120 s even under high supercooling. This is opposite to the common case of FIC but supports the idea that flow alters the obtained crystal size and its thermodynamic stability. Additionally, a morphological transition from a flow-induced network to shish is observed by SAXS with increasing extension temperature from below to above the melting point of Form II. With above observations, we construct nonequilibrium structural and morphological diagrams of FIC in strain rate-temperature space, which may guide the industrial processing of the PB-1 material.