Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros

Base de dados
Tipo de documento
País de afiliação
Intervalo de ano de publicação
1.
Anal Chem ; 96(22): 9069-9077, 2024 Jun 04.
Artigo em Inglês | MEDLINE | ID: mdl-38749062

RESUMO

Solid contact (SC) calcium ion-selective electrodes (Ca2+-ISEs) have been widely applied in the analysis of water quality and body fluids by virtue of the unique advantages of easy operation and rapid response. However, the potential drift during the long-term stability test hinders their further practical applications. Designing novel redox SC layers with large capacitance and high hydrophobicity is a promising approach to stabilize the potential stability, meanwhile, exploring the transduction mechanism is also of great guiding significance for the precise design of SC layer materials. Herein, flower-like copper sulfide (CunS-50) composed of nanosheets is meticulously designed as the redox SC layer by modification with the surfactant (CTAB). The CunS-50-based Ca2+-ISE (CunS-50/Ca2+-ISE) demonstrates a near-Nernstian slope of 28.23 mV/dec for Ca2+ in a wide activity linear range of 10-7 to 10-1 M, with a low detection limit of 3.16 × 10-8 M. CunS-50/Ca2+-ISE possesses an extremely low potential drift of only 1.23 ± 0.13 µV/h in the long-term potential stability test. Notably, X-ray absorption fine-structure (XAFS) spectra and electrochemical experiments are adopted to elucidate the transduction mechanism that the lipophilic anion (TFPB-) participates in the redox reaction of CunS-50 at the solid-solid interface of ion-selective membrane (ISM) and redox inorganic SC layer (CunS-50), thereby promoting the generation of free electrons to accelerate ion-electron transduction. This work provides an in-depth comprehension of the transduction mechanism of the potentiometric response and an effective strategy for designing redox materials of ion-electron transduction triggered by lipophilic anions.

2.
Sensors (Basel) ; 17(10)2017 Sep 29.
Artigo em Inglês | MEDLINE | ID: mdl-28961178

RESUMO

Graphene-based composites have gained great attention in the field of gas sensor fabrication due to their higher surface area with additional functional groups. Decorating one-dimensional (1D) semiconductor nanomaterials on graphene also show potential benefits in gas sensing applications. Here we demonstrate the one-pot and low cost synthesis of W18O49 NWs/rGO composites with different amount of reduced graphene oxide (rGO) which show excellent gas-sensing properties towards toluene and strong dependence on their chemical composition. As compared to pure W18O49 NWs, an improved gas sensing response (2.8 times higher) was achieved in case of W18O49 NWs composite with 0.5 wt. % rGO. Promisingly, this strategy can be extended to prepare other nanowire based composites with excellent gas-sensing performance.

3.
Nanotechnology ; 27(35): 355702, 2016 Sep 02.
Artigo em Inglês | MEDLINE | ID: mdl-27454792

RESUMO

Porous and single-crystalline ZnO nanobelts have been prepared through annealing precursors of ZnSe · 0.5N2H4 well-defined and smooth nanobelts, which have been synthesized via a simple hydrothermal method. The composition and morphology evolutions with the calcination temperatures have been investigated in detail for as-prepared precursor nanobelts, suggesting that they can be easily transformed into ZnO nanobelts by preserving their initial morphology via calcination in air. In contrast, the obtained ZnO nanobelts are densely porous, owing to the thermal decomposition and oxidization of the precursor nanobelts. More importantly, the achieved porous ZnO nanobelts are single-crystalline, different from previously reported ones. Motivated by the intrinsic properties of the porous structure and good electronic transporting ability of single crystals, their gas-sensing performance has been further explored. It is demonstrated that porous ZnO single-crystalline nanobelts exhibit high response and repeatability toward volatile organic compounds, such as ethanol and acetone, with a short response/recovery time. Furthermore, their optoelectronic behaviors indicate that they can be promisingly employed to fabricate photoelectrochemical sensors.

4.
Small ; 11(47): 6285-94, 2015 Dec 16.
Artigo em Inglês | MEDLINE | ID: mdl-26509434

RESUMO

Ag2Se nanobelts are prepared through employing ZnSe nanobelts as templates via a facile cation exchange approach. The templates are derived from precursor ZnSe·0.5N2 H4 nanobelts, which are synthesized by a simple hydrothermal method. As-synthesized precursor nanobelts are with 200 nm in width and several hundreds of micrometers in length. Annealed in N2 , they are transformed into ZnSe nanobelts with preserving their initial morphology. Following with a complete replacement of Zn(2+) by Ag(+), Ag2Se nanobelts with single crystalline are obtained via a cation-exchange reaction. Combined with the Langmuir-Blodgett assembly technique, regular films of ZnSe nanobelts can be achieved on transparent glass substrates and Si wafers with interdigital Au electrode arrays. Further, the optical and electrical evolutions are investigated from ZnSe nanobelts to Ag2 Se nanobelts. Finally, the resistive switching characteristic are carefully explored for Ag2Se nanobelts regularly arranged on interdigital Au microelectrodes. The results indicate that it is analogous to complementary resistive switching behaviors, which is different from that of traditional two terminal devices about previously reported Ag2Se. In order to clarify this phenomenon, a possible mechanism has been proposed and indirectly demonstrated through in situ SEM (scanning electron microscropy) observation.

5.
ACS Sens ; 2(1): 102-110, 2017 Jan 27.
Artigo em Inglês | MEDLINE | ID: mdl-28722446

RESUMO

Hierarchical morphology-dependent gas-sensing performances have been demonstrated for three-dimensional SnO2 nanostructures. First, hierarchical SnO2 nanostructures assembled with ultrathin shuttle-shaped nanosheets have been synthesized via a facile and one-step hydrothermal approach. Due to thermal instability of hierarchical nanosheets, they are gradually shrunk into cone-shaped nanostructures and finally deduced into rod-shaped ones under a thermal treatment. Given the intrinsic advantages of three-dimensional hierarchical nanostructures, their gas-sensing properties have been further explored. The results indicate that their sensing behaviors are greatly related with their hierarchical morphologies. Among the achieved hierarchical morphologies, three-dimensional cone-shaped hierarchical SnO2 nanostructures display the highest relative response up to about 175 toward 100 ppm of acetone as an example. Furthermore, they also exhibit good sensing responses toward other typical volatile organic compounds (VOCs). Microstructured analyses suggest that these results are mainly ascribed to the formation of more active surface defects and mismatches for the cone-shaped hierarchical nanostructures during the process of thermal recrystallization. Promisingly, this surface-engineering strategy can be extended to prepare other three-dimensional metal oxide hierarchical nanostructures with good gas-sensing performances.

6.
Dalton Trans ; 44(48): 21008-15, 2015 Dec 28.
Artigo em Inglês | MEDLINE | ID: mdl-26586364

RESUMO

Complexes [Ir(dfppy)2(pbdtiH)](PF6)·2CHCl3 (1-H) and [Ir(dfppy)2(pbdti)] (1) were synthesized by the reaction of bisthienylethene pbdtiH and an [Ir(dfppy)2Cl]2 dimer under neutral and basic conditions, respectively. Thus, the {Ir(dfppy)2}(+) unit is coordinated by pbdtiH in 1-H, and by pbdti(-) in 1, which are confirmed by their crystal structures. The structures of 1-H and 1 could be interconverted in solution, upon alternately adding NEt3 and TFA, thus resulting in reversible luminescence switching between the on-state of 1-H and the off-state of 1 at room temperature. In addition, both 1-H and 1 show solid-state luminescence, with a broad emission at 534 nm and 525 nm, respectively. The free pbdtiH ligand shows photochromic behavior in CH2Cl2 solution. However, no photochromism has been observed in 1-H and 1, indicating that the coordination of the pbdtiH/pbdti(-) ligand to the {Ir(dfppy)2}(+) unit could suppress their photochromic behaviors.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA