Compositionally complex doping for zero-strain zero-cobalt layered cathodes.

The high volatility of the price of cobalt and the geopolitical limitations of cobalt mining have made the elimination of Co a pressing need for the automotive industry1. Owing to their high energy density and low-cost advantages, high-Ni and low-Co or Co-free (zero-Co) layered cathodes have become the most promising cathodes for next-generation lithium-ion batteries2,3. However, current high-Ni cathode materials, without exception, suffer severely from their intrinsic thermal and chemo-mechanical instabilities and insufficient cycle life. Here, by using a new compositionally complex (high-entropy) doping strategy, we successfully fabricate a high-Ni, zero-Co layered cathode that has extremely high thermal and cycling stability. Combining X-ray diffraction, transmission electron microscopy and nanotomography, we find that the cathode exhibits nearly zero volumetric change over a wide electrochemical window, resulting in greatly reduced lattice defects and local strain-induced cracks. In-situ heating experiments reveal that the thermal stability of the new cathode is significantly improved, reaching the level of the ultra-stable NMC-532. Owing to the considerably increased thermal stability and the zero volumetric change, it exhibits greatly improved capacity retention. This work, by resolving the long-standing safety and stability concerns for high-Ni, zero-Co cathode materials, offers a commercially viable cathode for safe, long-life lithium-ion batteries and a universal strategy for suppressing strain and phase transformation in intercalation electrodes.

Modeling 0.6 million genes for the rational design of functional cis-regulatory variants and de novo design of cis-regulatory sequences.

Rational design of plant cis-regulatory DNA sequences without expert intervention or prior domain knowledge is still a daunting task. Here, we developed PhytoExpr, a deep learning framework capable of predicting both mRNA abundance and plant species using the proximal regulatory sequence as the sole input. PhytoExpr was trained over 17 species representative of major clades of the plant kingdom to enhance its generalizability. Via input perturbation, quantitative functional annotation of the input sequence was achieved at single-nucleotide resolution, revealing an abundance of predicted high-impact nucleotides in conserved noncoding sequences and transcription factor binding sites. Evaluation of maize HapMap3 single-nucleotide polymorphisms (SNPs) by PhytoExpr demonstrates an enrichment of predicted high-impact SNPs in cis-eQTL. Additionally, we provided two algorithms that harnessed the power of PhytoExpr in designing functional cis-regulatory variants, and de novo creation of species-specific cis-regulatory sequences through in silico evolution of random DNA sequences. Our model represents a general and robust approach for functional variant discovery in population genetics and rational design of regulatory sequences for genome editing and synthetic biology.

Self-terminating, heterogeneous solid-electrolyte interphase enables reversible Li-ether cointercalation in graphite anodes.

Ether solvents are suitable for formulating solid-electrolyte interphase (SEI)-less ion-solvent cointercalation electrolytes in graphite for Na-ion and K-ion batteries. However, ether-based electrolytes have been historically perceived to cause exfoliation of graphite and cell failure in Li-ion batteries. In this study, we develop strategies to achieve reversible Li-solvent cointercalation in graphite through combining appropriate Li salts and ether solvents. Specifically, we design 1M LiBF4 1,2-dimethoxyethane (G1), which enables natural graphite to deliver ~91% initial Coulombic efficiency and >88% capacity retention after 400 cycles. We captured the spatial distribution of LiF at various length scales and quantified its heterogeneity. The electrolyte shows self-terminated reactivity on graphite edge planes and results in a grainy, fluorinated pseudo-SEI. The molecular origin of the pseudo-SEI is elucidated by ab initio molecular dynamics (AIMD) simulations. The operando synchrotron analyses further demonstrate the reversible and monotonous phase transformation of cointercalated graphite. Our findings demonstrate the feasibility of Li cointercalation chemistry in graphite for extreme-condition batteries. The work also paves the foundation for understanding and modulating the interphase generated by ether electrolytes in a broad range of electrodes and batteries.

Two-Coordinate Thermally Activated Delayed Fluorescence Coinage Metal Complexes: Molecular Design, Photophysical Characters, and Device Application.

Since the emergence of the first green light emission from a fluorescent thin-film organic light emitting diode (OLED) in the mid-1980s, a global consumer market for OLED displays has flourished over the past few decades. This growth can primarily be attributed to the development of noble metal phosphorescent emitters that facilitated remarkable gains in electrical conversion efficiency, a broadened color gamut, and vibrant image quality for OLED displays. Despite these achievements, the limited abundance of noble metals in the Earth's crust has spurred ongoing efforts to discover cost-effective electroluminescent materials. One particularly promising avenue is the exploration of thermally activated delayed fluorescence (TADF), a mechanism with the potential to fully harness excitons in OLEDs. Recently, investigations have unveiled TADF in a series of two-coordinate coinage metal (Cu, Ag, and Au) complexes. These organometallic TADF materials exhibit distinctive behavior in comparison to their organic counterparts. They offer benefits such as tunable emissive colors, short TADF emission lifetimes, high luminescent quantum yields, and reasonable stability. Impressively, both vacuum-deposited and solution-processed OLEDs incorporating these materials have achieved outstanding performance. This review encompasses various facets on two-coordinate TADF coinage metal complexes, including molecular design, photophysical characterizations, elucidation of structure-property relationships, and OLED applications.

Safety and efficacy of an anti-human APC antibody for prophylaxis of congenital factor deficiencies in preclinical models.

Rebalance of coagulation and anticoagulation to achieve a hemostatic effect has recently gained attention as an alternative therapeutic strategy for hemophilia. We engineered a humanized chimeric antibody, SR604, based on a previously published murine antibody, HAPC1573, which selectively blocks the anticoagulant activity of human activated protein C (APC). SR604 effectively blocked the anticoagulation activities of APC in human plasma deficient in various coagulation factors in vitro with affinities ∼60 times greater than that of HAPC1573. SR604 exhibited prophylactic and therapeutic efficacy in the tail-bleeding and knee-injury models of hemophilia A and B mice expressing human APC (humanized hemophilic mice). SR604 did not interfere with the cytoprotection and endothelial barrier function of APC, nor were there obvious toxicity effects in humanized hemophilic mice. Pharmacokinetic study showed a high bioavailability (106%) of subcutaneously injected SR604 in cynomolgus monkeys. These results demonstrate that SR604 is expected to be a safe and effective therapeutic and/or prophylactic agent with a prolonged half-life for patients with congenital factor deficiencies including hemophilia A and B.

Decoding Active Sites for Highly Efficient Semihydrogenation of Acetylene in Palladium-Copper Nanoalloys.

Accurately decoding the three-dimensional atomic structure of surface active sites is essential yet challenging for a rational catalyst design. Here, we used comprehensive techniques combining the pair distribution function and reverse Monte Carlo simulation to reveal the surficial distribution of Pd active sites and adjacent coordination environment in palladium-copper nanoalloys. After the fine-tuning of the atomic arrangement, excellent catalytic performance with 98% ethylene selectivity at complete acetylene conversion was obtained in the Pd34Cu66 nanocatalysts, outperforming most of the reported advanced catalysts. The quantitative deciphering shows a large number of active sites with a Pd-Pd coordination number of 3 distributed on the surface of Pd34Cu66 nanoalloys, which play a decisive role in highly efficient semihydrogenation. This finding not only opens the way for guiding the precise design of bimetal nanocatalysts from atomic-level insight but also provides a method to resolve the spatial structure of active sites.

Simultaneous Thermally Stimulated Delayed Phosphorescence (TSDP) and Thermally Activated Delayed Fluorescence (TADF) in a Two-Coordinated Au(I) Bimetallic Complex Featuring a Tandem Carbene Structure.

A bimetallic, two-coordinated carbene-metal-amine (cMa) Au(I) complex featuring a twisted tandem carbene structure (NHC1-Au-NHC2-Au-carbazolyl) was synthesized. The molecular structure in single crystals revealed a large dihedral angle between the two carbene ligands, while the bridged carbene NHC2 and carbazolyl (Cz) ligands were coplanar. A bluish green thermally stimulated delayed phosphorescence (TSDP) was observed in crystals with an emission lifetime over 70 µs, which can be attributed to the spin allowed diabatic population of a high-lying emissive triplet state from the 3LE characterized low-lying ones. The small rotation energy barrier of Cz along the coordination bond allowed conformers with large dihedral angles between NHC2 and Cz. The ICT characterized S1 state was consequently stabilized to achieve a thermally accessible energy gap to facilitate ISC between triplets and the S1, leading to the thermally activated delayed fluorescence (TADF). Simultaneous TSDP and TADF dual emission can be recorded in its doped polymer film owing to the coexistence of these different conformers.

Solvent-Mediated, Reversible Ternary Graphite Intercalation Compounds for Extreme-Condition Li-Ion Batteries.

Traditional Li-ion intercalation chemistry into graphite anodes exclusively utilizes the cointercalation-free or cointercalation mechanism. The latter mechanism is based on ternary graphite intercalation compounds (t-GICs), where glyme solvents were explored and proved to deliver unsatisfactory cyclability in LIBs. Herein, we report a novel intercalation mechanism, that is, in situ synthesis of t-GIC in the tetrahydrofuran (THF) electrolyte via a spontaneous, controllable reaction between binary-GIC (b-GIC) and free THF molecules during initial graphite lithiation. The spontaneous transformation from b-GIC to t-GIC, which is different from conventional cointercalation chemistry, is characterized and quantified via operando synchrotron X-ray and electrochemical analyses. The resulting t-GIC chemistry obviates the necessity for complete Li-ion desolvation, facilitating rapid kinetics and synchronous charge/discharge of graphite particles, even under high current densities. Consequently, the graphite anode demonstrates unprecedented fast charging (1 min), dendrite-free low-temperature performance, and ultralong lifetimes exceeding 10 000 cycles. Full cells coupled with a layered cathode display remarkable cycling stability upon a 15 min charging and excellent rate capability even at -40 °C. Furthermore, our chemical strategies are shown to extend beyond Li-ion batteries to encompass Na-ion and K-ion batteries, underscoring their broad applicability. Our work contributes to the advancement of graphite intercalation chemistry and presents a low-cost, adaptable approach for achieving fast-charging and low-temperature batteries.

Adjuvant treatment strategy evolution and risk stratification for hormone receptor-positive, human epidermal growth factor receptor-2 negative early breast cancer in China.

BACKGROUND: Patients with hormone receptor-positive (HR+), human epidermal growth factor receptor-2 negative (HER2-) early breast cancer (EBC) with high-risk clinicopathological features face an increased risk of recurrence. This study explored the evolving treatment landscape and clinical outcomes in patients with EBC using a nationwide database. PATIENTS AND METHODS: The study cohort comprised HR+/HER2-, stages 1-3, patients with EBC who underwent surgery and received adjuvant endocrine therapy (AET) from January 2013 to March 2021. High-risk patients were defined by ≥4 positive axillary lymph nodes, or 1-3 positive lymph node(s) with at least one high-risk feature (histologic grade 3, tumor size ≥5 cm, or Ki-67 ≥20%). A low-risk cohort included patients not meeting the criteria. Survival analysis was conducted with a cutoff of September 2021. RESULTS: The study included 4088 eligible patients (1310 high-risk patients and 2778 low-risk patients). High-risk patients were more likely to receive adjuvant chemotherapy and radiotherapy compared to low-risk patients. From 2013 to 2021, an increasing proportion of patients received aromatase inhibitors and ovarian function suppression as part of their AET. The 2-, 5-, and 7-year invasive disease-free survival for high-risk cohort were 90.67%, 75.26%, and 57.10%, respectively, these rates were notably higher for low-risk cohort at 97.14%, 89.85%, and 84.83%. High-risk patients demonstrated a higher risk of recurrence or death compared with low-risk patients (hazard ratio, 2.38; 95% CI, 1.82-3.12). CONCLUSION: In the setting of standard or even intensive AET, patients with EBC with high-risk features still present high recurrence risk, highlighting the urgent need for innovative adjuvant treatment strategies.

Regulating Li Nucleation and Growth Heterogeneities via Near-Surface Lithium-Ion Irrigation for Stable Anode-Less Lithium Metal Batteries.

The inhomogeneous nucleation and growth of Li dendrite combined with the spontaneous side reactions with the electrolytes dramatically challenge the stability and safety of Li metal anode (LMA). Despite tremendous endeavors, current success relies on the use of significant excess of Li to compensate the loss of active Li during cycling. Herein, a near-surface Li+ irrigation strategy is developed to regulate the inhomogeneous Li deposition behavior and suppress the consequent side reactions under limited Li excess condition. The conformal polypyrrole (PPy) coating layer on Cu surface via oxidative chemical vapor deposition technique can induce the migration of Li+ to the interregional space between PPy and Cu, creating a near-surface Li+-rich region to smooth diffusion of ion flux and uniform the deposition. Moreover, as evidenced by multiscale characterizations including synchrotron high-energy X-ray diffraction scanning, a robust N-rich solid-electrolyte interface (SEI) is formed on the PPy skeleton to effectively suppress the undesired SEI formation/dissolution process. Strikingly, stable Li metal cycling performance under a high areal capacity of 10 mAh cm-2 at 2.0 mA cm-2 with merely 0.5 × Li excess is achieved. The findings not only resolve the long-standing poor LMA stability/safety issues, but also deepen the mechanism understanding of Li deposition process.

Tailoring planar slip to achieve pure metal-like ductility in body-centred-cubic multi-principal element alloys.

Uniform tensile ductility (UTD) is crucial for the forming/machining capabilities of structural materials. Normally, planar-slip induced narrow deformation bands localize the plastic strains and hence hamper UTD, particularly in body-centred-cubic (bcc) multi-principal element high-entropy alloys (HEAs), which generally exhibit early necking (UTD < 5%). Here we demonstrate a strategy to tailor the planar-slip bands in a Ti-Zr-V-Nb-Al bcc HEA, achieving a 25% UTD together with nearly 50% elongation-to-failure (approaching a ductile elemental metal), while offering gigapascal yield strength. The HEA composition is designed not only to enhance the B2-like local chemical order (LCO), seeding sites to disperse planar slip, but also to generate excess lattice distortion upon deformation-induced LCO destruction, which promotes elastic strains and dislocation debris to cause dynamic hardening. This encourages second-generation planar-slip bands to branch out from first-generation bands, effectively spreading the plastic flow to permeate the sample volume. Moreover, the profuse bands frequently intersect to sustain adequate work-hardening rate (WHR) to large strains. Our strategy showcases the tuning of plastic flow dynamics that turns an otherwise-undesirable deformation mode to our advantage, enabling an unusual synergy of yield strength and UTD for bcc HEAs.

Correlation of circulating fibroblast growth factor 21 levels with inflammatory factors and the degree of coronary artery stenosis in patients with acute myocardial infarction.

BACKGROUND: Fibroblast growth factor 21 (FGF21) is a secreted protein that plays an important role in atherosclerosis and pathological cardiac remodeling. However, the correlation between FGF21 and the degree of coronary artery stenosis and its potential role in acute myocardial infarction (AMI) remain unclear. We examined whether changes in FGF21 levels in AMI correlate with the degree of coronary artery stenosis and the levels of inflammatory factors, and preliminarily investigated the effects of FGF21 on inflammatory factor levels and myocardial injury in rats with AMI. METHODS: Serum levels of FGF21 and inflammatory factors in the AMI group and control group were measured, and the correlation between FGF21 and clinical indicators and inflammatory factors was analyzed. The effects of FGF21 on cardiac function and inflammatory response were evaluated through echocardiography and measurement of inflammatory factors. RESULTS: Multivariate logistic regression analysis showed that neutrophil percentage (NEUT%, odds ratio [OR]: 1.232; 95 % confidence interval [CI]: 1.028-1.477; p = 0.024) and FGF21 levels (OR: 2.063; 95 % CI: 1.187-3.586; p = 0.01) had independent effects on AMI. Spearman's rank correlation test showed that FGF21 levels were positively correlated with leukocyte count, NEUT%, neutrophil count, neutrophil to lymphocyte ratio, C-reactive protein, interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), monocyte chemotactic protein-1 (MCP-1) and Gensini scores (p < 0.01), but negatively correlated with lymphocyte count (p < 0.01). FGF21 levels in myocardial tissues and serum levels of FGF21, IL-6, TNF-a, and MCP-1 were significantly higher in AMI rats than in the sham-operated group (p < 0.01). After overexpression of FGF21, serum levels of IL-6, TNF-a, and MCP-1 in rats were significantly decreased (p < 0.01), and cardiac function improved significantly. CONCLUSIONS: FGF21 levels were independently associated with AMI and may be related to the severity of coronary artery stenosis. Overexpression of FGF21 reduced serum inflammatory factor levels and improved cardiac function in AMI rats.

Light control of a movable microbubble in an ethanol-filled fiber microcavity for displacement measurement.

An optical fiber displacement sensor based on a light-controlled microbubble in an ethanol-filled fiber microcavity is proposed. The single-frequency 1550 nm laser in the side-lead-in single-mode fiber (SMF) produces an uneven temperature gradient by side irradiation in the ethanol-filled fiber microcavity. The microbubble shifts to the laser irradiation position along the microcavity due to the Marangoni effect and finally stops at the laser irradiation position. When the side-lead-in SMF moves, the microbubble follows. The surfaces of the microcavity and microbubble form a Fabry-Perot interferometer (FPI). The optical path difference (OPD) of the FPI is demodulated by the position of the side-lead-in SMF, which can be used for the displacement measurement with ultrahigh sensitivity (1.1 × 10-3 nm-1/µm). What is more, the proposed structure is only sensitive to a one-dimensional direction and has the advantages of non-contact, large range, and high resolution, which makes it a perfect candidate for displacement sensors.

Monolithic tunable dual-wavelength laser utilizing erbium-doped lithium niobate on an insulator.

We demonstrate a monolithic tunable dual-wavelength laser fabricated on erbium-doped lithium niobate on an insulator (Er:LNOI). The dual-wavelength laser enables independent tuning with a continuously linear electro-optic (EO)-modulated tuning range of 11.875 GHz at a tuning efficiency of 0.63 pm/V. Tunable microwave generation within 50 GHz with a maximum extinction ratio of 35 dB is experimentally demonstrated by further exploring the charge accumulation effect in LNOI. The monolithic design of this work paves the way for microscale integration of laser devices, presenting significant prospects in photonics research and applications.

The profile of steroid hormones in human fetal and adult ovaries.

BACKGROUND: Reproduction in women is at risk due to exposure to chemicals that can disrupt the endocrine system during different windows of sensitivity throughout life. Steroid hormone levels are fundamental for the normal development and function of the human reproductive system, including the ovary. This study aims to elucidate steroidogenesis at different life-stages in human ovaries. METHODS: We have developed a sensitive and specific LC-MS/MS method for 21 important steroid hormones and measured them at different life stages: in media from cultures of human fetal ovaries collected from elective terminations of normally progressing pregnancy and in media from adult ovaries from Caesarean section patients, and follicular fluid from women undergoing infertility treatment. Statistically significant differences in steroid hormone levels and their ratios were calculated with parametric tests. Principal component analysis (PCA) was applied to explore clustering of the ovarian-derived steroidogenic profiles. RESULTS: Comparison of the 21 steroid hormones revealed clear differences between the various ovarian-derived steroid profiles. Interestingly, we found biosynthesis of both canonical and "backdoor" pathway steroid hormones and corticosteroids in first and second trimester fetal and adult ovarian tissue cultures. 17α-estradiol, a less potent naturally occurring isomer of 17ß-estradiol, was detected only in follicular fluid. PCA of the ovarian-derived profiles revealed clusters from: adult ovarian tissue cultures with relatively high levels of androgens; first trimester and second trimester fetal ovarian tissue cultures with relatively low estrogen levels; follicular fluid with the lowest androgens, but highest corticosteroid, progestogen and estradiol levels. Furthermore, ratios of specific steroid hormones showed higher estradiol/ testosterone and estrone/androstenedione (indicating higher CYP19A1 activity, p < 0.01) and higher 17-hydroxyprogesterone/progesterone and dehydroepiandrosterone /androstenedione (indicating higher CYP17A1 activity, p < 0.01) in fetal compared to adult ovarian tissue cultures. CONCLUSIONS: Human ovaries demonstrate de novo synthesis of non-canonical and "backdoor" pathway steroid hormones and corticosteroids. Elucidating the steroid profiles in human ovaries improves our understanding of physiological, life-stage dependent, steroidogenic capacity of ovaries and will inform mechanistic studies to identify endocrine disrupting chemicals that affect female reproduction.

Mediating effects of sleep quality between clinical characteristics and quality of life in children with epilepsy: A cross-sectional study from Southwest China.

BACKGROUND: Although sleep quality (SQ) reportedly affects the health-related quality of life (QOL) of patients with epilepsy, little is known about the potential association between SQ and QOL, particularly in children with epilepsy (CWE). Our study aimed to investigate the mediating effect of SQ on the QOL of CWE to obtain more information for the prevention and treatment of epilepsy in children. METHODS: We collected general demographic and clinical data of 212 CWE and 79 controls (children who visited the Health Examination Department), and their guardians were instructed to answer the Children's Sleep Habits Questionnaire (CSHQ) and the optimized Quality of Life in Childhood Epilepsy Questionnaire-16 (QOLCE-16). The t-test, analysis of variance, chi-square test, and Fisher's exact test were used for between group comparisons. The Pearson correlation was used to analyze the correlation between variables. The direct, indirect, and total effects of predictors on the QOL of CWE were estimated based on an adjusted mediation model. RESULTS: CWE had significantly smaller long-term urban residence rates, less educated guardians, higher total CSHQ score, higher incidence of poor SQ, higher bedtime resistance, more sleep anxiety, worse sleep-disordered breathing, increased parasomnia, more daytime sleepiness, more frequent night waking, and greater sleep onset delay than controls (P < 0.05 for all). The univariable analysis showed significant differences in total CSHQ scores between CWE with different seizure frequency in the last month, whether or not drug-resistant epilepsy (DRE), and with different video electroencephalogram (VEEG) findings (P < 0.05 for all). Differences in QOLCE-16 scores between CWE with different guardian's employment status, age at diagnosis, number of anti-seizure medication (ASM) types, seizure frequency in the last month, DRE status, seizure type, VEEG findings, neuropsychological evaluation findings, magnetic resonance imaging (MRI) findings, and etiology were statistically significant (P < 0.05 for all). The correlation study indicated that the total CSHQ score was negatively correlated with the QOLCE-16 score (P < 0.05). The mediation analysis showed that DRE and VEEG abnormalities had a standardized direct effect on the QOL. Seizure frequency in the last month, DRE, and VEEG abnormalities had an indirect effect on the QOL through SQ, and their mediating effect values of SQ were 31.61 %, 13.45 %, and 14.35 %, respectively. CONCLUSION: Our findings uncovered the relationship of some clinical characteristics with SQ and QOL and characterized the nature of factors affecting the QOL of CWE. SQ could be a key factor in the prognosis of CWE experiencing epileptic seizures, and more attention should be paid on the management of SQ in interventions for epilepsy.

Integrating metabolomics and bioinformatics to reveal the mechanism of Epimedium-induced liver injury.

Epimedium is a traditional Chinese medicine with a wide range of clinical applications; however, there have been numerous reports of adverse reactions in recent years. The most common side effect of Epimedium is liver injury. In this study, the liquid chromatography-mass spectrometry (LC-MS) method has been established to study the components of Epimedium and to identify the components absorbed into the blood of rats. Bioinformatics was used to screen out potential toxic components, and the integrating metabolomics method was used to explore the molecular mechanism of Epimedium-induced liver injury. The chemical constituents of Epimedium were identified by LC-MS, and 62 compounds were obtained, including 57 flavonoids, four organic acids and one alkaloid. The toxicity network of "Epimedium-component-target-liver injury" was constructed using bioinformatics research methods, and then the key hepatotoxic component icaritin was identified. Integrating metabolomics was used to investigate the changes in the metabolic profile of L-02 cells with different durations of icaritin administration compared with the control group, and 106 different metabolites were obtained. A total of 14 potential biomarkers significantly associated with cell survival were screened by Pearson correlation analysis combined with the L-02 cell survival rate. Our study preliminarily revealed the mechanism of hepatotoxicity induced by Epimedium.

Boundary-Rich Carbon-Based Electrocatalysts with Manganese(II)-Coordinated Active Environment for Selective Synthesis of Hydrogen Peroxide.

Coordinated manganese (Mn) electrocatalysts owing to their electronic structure flexibility, non-toxic and earth abundant features are promising for electrocatalytic reactions. However, achieving selective hydrogen peroxide (H2 O2 ) production through two electron oxygen reduction (2e-ORR) is a challenge on Mn-centered catalysts. Targeting this goal, we report on the creation of a secondary Mn(II)-coordinated active environment with reactant enrichment effect on boundary-rich porous carbon-based electrocatalysts, which facilitates the selective and rapid synthesis of H2 O2 through 2e-ORR. The catalysts exhibit nearly 100 % Faradaic efficiency and H2 O2 productivity up to 15.1 mol gcat -1 h-1 at 0.1 V versus reversible hydrogen electrode, representing the record high activity for Mn-based electrocatalyst in H2 O2 electrosynthesis. Mechanistic studies reveal that the epoxide and hydroxyl groups surrounding Mn(II) centers improve spin state by modifying electronic properties and charge transfer, thus tailoring the adsorption strength of *OOH intermediate. Multiscale simulations reveal that the high-curvature boundaries facilitate oxygen (O2 ) adsorption and result in local O2 enrichment due to the enhanced interaction between carbon surface and O2 . These merits together ensure the efficient formation of H2 O2 with high local concentration, which can directly boost the tandem reaction of hydrolysis of benzonitrile to benzamide with nearly 100 % conversion rate and exclusive benzamide selectivity.

Atomic Three-Dimensional Investigations of Pd Nanocatalysts for Acetylene Semi-hydrogenation.

Deciphering the three-dimensional (3D) insight into nanocatalyst surfaces at the atomic level is crucial to understanding catalytic reaction mechanisms and developing high-performance catalysts. Nevertheless, better understanding the inherent insufficiency of a long-range ordered lattice in nanocatalysts is a big challenge. In this work, we report the local structure of Pd nanocatalysts, which is beneficial for demonstrating the shape-structure-adsorption relationship in acetylene hydrogenation. The 5.27 nm spherical Pd catalyst (Pdsph) shows an ethylene selectivity of 88% at complete acetylene conversion, which is much higher than those of the Pd octahedron and Pd cube and superior to other reported monometallic Pd nanocatalysts so far. By virtue of the local structure revelation combined with the atomic pair distribution function (PDF) and reverse Monte Carlo (RMC) simulation, the atomic surface distribution of the unique compressed strain of Pd-Pd pairs in Pdsph was revealed. Density functional theory calculations verified the obvious weakening of the ethylene adsorption energy on account of the surface strain of Pdsph. It is the main factor to avoid the over-hydrogenation of acetylene. The present work, entailing shape-induced surface strain manipulation and atomic 3D insight, opens a new path to understand and optimize chemical activity and selectivity in the heterogeneous catalysis process.

Correlating Rate-Dependent Transition Metal Dissolution between Structure Degradation in Li-Rich Layered Oxides.

Understanding the mechanism of the rate-dependent electrochemical performance degradation in cathodes is crucial to developing fast charging/discharging cathodes for Li-ion batteries. Here, taking Li-rich layered oxide Li1.2 Ni0.13 Co0.13 Mn0.54 O2 as the model cathode, the mechanisms of performance degradation at low and high rates are comparatively investigated from two aspects, the transition metal (TM) dissolution and the structure change. Quantitative analyses combining spatial-resolved synchrotron X-ray fluorescence (XRF) imaging, synchrotron X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques reveal that low-rate cycling leads to gradient TM dissolution and severe bulk structure degradation within the individual secondary particles, and especially the latter causes lots of microcracks within secondary particles, and becomes the main reason for the fast capacity and voltage decay. In contrast, high-rate cycling leads to more TM dissolution than low-rate cycling, which concentrates at the particle surface and directly induces the more severe surface structure degradation to the electrochemically inactive rock-salt phase, eventually causing a faster capacity and voltage decay than low-rate cycling. These findings highlight the protection of the surface structure for developing fast charging/discharging cathodes for Li-ion batteries.