Origin and evolution of the bread wheat D genome.

Bread wheat (Triticum aestivum) is a globally dominant crop and major source of calories and proteins for the human diet. Compared with its wild ancestors, modern bread wheat shows lower genetic diversity, caused by polyploidisation, domestication and breeding bottlenecks1,2. Wild wheat relatives represent genetic reservoirs, and harbour diversity and beneficial alleles that have not been incorporated into bread wheat. Here we establish and analyse extensive genome resources for Tausch's goatgrass (Aegilops tauschii), the donor of the bread wheat D genome. Our analysis of 46 Ae. tauschii genomes enabled us to clone a disease resistance gene and perform haplotype analysis across a complex disease resistance locus, allowing us to discern alleles from paralogous gene copies. We also reveal the complex genetic composition and history of the bread wheat D genome, which involves contributions from genetically and geographically discrete Ae. tauschii subpopulations. Together, our results reveal the complex history of the bread wheat D genome and demonstrate the potential of wild relatives in crop improvement.

Poly(N,N-diethylacrylamide)-endowed spontaneous emulsification during the breath figure process and the formation of membranes with hierarchical pores.

The spontaneous emulsification for the formation of water-in-oil (W/O) or oil-in-water (O/W) emulsions needs the help of at least one kind of the third component (surfactant or cosolvent) to stabilize the oil-water interface. Herein, with the water/CS2-soluble polymer poly(N,N-diethylacrylamide) (PDEAM) as a surfactant, the spontaneous formation of water-in-PDEAM/CS2 emulsions is reported for the first time. The strong affinity between PDEAM and water or the increase of PDEAM concentration will accelerate the emulsification process with high dispersed phase content. It is demonstrated that the spontaneous emulsification of condensed water droplets into the PDEAM/CS2 solution occurs during the breath figure process, resulting in porous films with two levels of pore sizes (i.e., micron and submicron). The emulsification degree and the amounts of submicron-sized pores increase with PDEAM concentration and solidifying time of the solution. This work brings about incremental interest in spontaneous emulsification that may happen during the breath figure process. The combination of these two simultaneous processes provides us with an option to build hierarchically porous structures with condensed and emulsified water droplets as templates. Such porous membranes may have great potential in fields such as separation, cell culture, and biosensing.

CRISPR-induced miRNA156-recognition element mutations in TaSPL13 improve multiple agronomic traits in wheat.

Increase in grain yield is always a major objective of wheat genetic improvement. The SQUAMOSA promoter-binding protein-like (SPL) genes, coding for a small family of diverse plant-specific transcription factors, represent important targets for improving grain yield and other major agronomic traits in rice. The function of the SPL genes in wheat remains to be investigated in this respect. In this study, we identified 56 wheat orthologues of rice SPL genes belonging to 19 homoeologous groups. Like in rice, nine orthologous TaSPL genes harbour the microRNA156 recognition elements (MRE) in their last exons except for TaSPL13, which harbour the MRE in its 3'-untranslated region (3'UTR). We modified the MRE of TaSPL13 using CRISPR-Cas9 and generated 12 mutations in the three homoeologous genes. As expected, the MRE mutations led to an approximately two-fold increase in the TaSPL13 mutant transcripts. The phenotypic evaluation showed that the MRE mutations in TaSPL13 resulted in a decrease in flowering time, tiller number, and plant height, and a concomitantly increase in grain size and number. The results show that the TaSPL13 mutants exhibit a combination of different phenotypes observed in Arabidopsis AtSPL3/4/5 mutants and rice OsSPL13/14/16 mutants and hold great potential in improving wheat yield by simultaneously increasing grain size and number and by refining plant architecture. The novel TaSPL13 mutations generated can be utilized in wheat breeding programmes to improve these agronomic traits.

Multiple origins of Indian dwarf wheat by mutations targeting the TREE domain of a GSK3-like kinase for drought tolerance, phosphate uptake, and grain quality.

KEY MESSAGE: Multiple origins of Indian dwarf wheat were due to two mutations targeting the same TREE domain of a GSK3-like kinase, and these mutations confer to enhanced drought tolerance and increased phosphate and nitrogen accumulation for adaptation to the dry climate of Indian and Pakistan. Indian dwarf wheat, featured by the short stature, erect leaves, dense spikes, and small, spherical grains, was a staple crop in India and Pakistan from the Bronze Age until the early 1900s. These morphological features are controlled by a single locus Sphaerococcum 1 (S1), but the genetic identity of the locus and molecular mechanisms underlying the selection of this wheat type are unknown. In this study, we showed that the origin of Indian dwarf wheat was due to two independent missense mutations targeting the conserved TREE domain of a GSK3-like kinase, which is homologous to the Arabidopsis BIN2 protein, a negative regulator in brassinosteroid signaling. The S1 protein is involved in brassinosteroid signaling by physical interaction with the wheat BES1/BZR1 proteins. The dwarf alleles are insensitive to brassinosteroid, upregulates brassinosteroid biosynthetic genes, significantly enhanced drought tolerance, facilitated phosphate accumulation, and increased high molecular weight glutenins. It is the enhanced drought tolerance and accumulation of nitrogen and phosphate that contributed to the adaptation of such a small-grain form of wheat to the dry climate of India and Pakistan. Thus, our research not only identified the genetic events underlying the origin of the Indian dwarf wheat, but also revealed the function of brassinosteroid in the regulation of drought tolerance, phosphate homeostasis, and grain quality.

Development of an Agrobacterium-delivered CRISPR/Cas9 system for wheat genome editing.

CRISPR/Cas9 has been widely used for genome editing in many organisms, including important crops like wheat. Despite the tractability in designing CRISPR/Cas9, efficacy in the application of this powerful genome editing tool also depends on DNA delivery methods. In wheat, the biolistics based transformation is the most used method for delivery of the CRISPR/Cas9 complex. Due to the high frequency of gene silencing associated with co-transferred plasmid backbone and low edit rate in wheat, a large T0 transgenic plant population are required for recovery of desired mutations, which poses a bottleneck for many genome editing projects. Here, we report an Agrobacterium-delivered CRISPR/Cas9 system in wheat, which includes a wheat codon optimized Cas9 driven by a maize ubiquitin gene promoter and a guide RNA cassette driven by wheat U6 promoters in a single binary vector. Using this CRISPR/Cas9 system, we have developed 68 edit mutants for four grain-regulatory genes, TaCKX2-1, TaGLW7, TaGW2, and TaGW8, in T0 , T1 , and T2 generation plants at an average edit rate of 10% without detecting off-target mutations in the most Cas9-active plants. Homozygous mutations can be recovered from a large population in a single generation. Different from most plant species, deletions over 10 bp are the dominant mutation types in wheat. Plants homozygous of 1160-bp deletion in TaCKX2-D1 significantly increased grain number per spikelet. In conclusion, our Agrobacterium-delivered CRISPR/Cas9 system provides an alternative option for wheat genome editing, which requires a small number of transformation events because CRISPR/Cas9 remains active for novel mutations through generations.

Development and characterization of wheat-sea wheatgrass (Thinopyrum junceiforme) amphiploids for biotic stress resistance and abiotic stress tolerance.

KEY MESSAGE: Development of a complete wheat-Thinopyrum junceiforme amphiploid facilitated identification of resistance to multiple pests and abiotic stress derived from the wild species and shed new light on its genome composition. Wheat production is facing numerous challenges from biotic and abiotic stresses. Alien gene transfer has been an effective approach for wheat germplasm enhancement. Thinopyrum junceiforme, also known as sea wheatgrass (SWG), is a distant relative of wheat and a relatively untapped source for wheat improvement. In the present study, we developed a complete amphiploid, 13G819, between emmer wheat and SWG for the first time. Analysis of the chromosome constitution of the wheat-SWG amphiploid by multiple-color genomic in situ hybridization indicated that SWG is an allotetraploid with its J1 genome closely related to Th. bessarabicum and Th. elongatum, and its J2 genome was derived from an unknown source. Two SWG-derived perennial wheat lines, 14F3516 and 14F3536, are partial amphiploids and carry 13 SWG chromosomes of mixed J1 and J2 genome composition, suggesting cytological instability. We challenged the amphiploid 13G819 with various abiotic and biotic stress treatments together with its emmer wheat parent. Compared to its emmer wheat parent, the amphiploid showed high tolerance to waterlogging, manganese toxicity and salinity, low nitrogen and possibly to heat as well. The amphiploid 13G819 is also highly resistant to the wheat streak mosaic virus (temperature insensitive) and Fusarium head blight. All three amphiploids had solid stems, which confer resistance to wheat stem sawflies. All these traits make SWG an excellent source for improving wheat resistance to diseases and insects and tolerance to abiotic stress.

Translational genomics of grain size regulation in wheat.

KEY MESSAGE: Identifying and mapping grain size candidate genes in the wheat genome greatly empowers reverse genetics approaches to improve grain yield potential of wheat. Grain size (GS) or grain weight is believed to be a major driving force for further improvement of wheat yield. Although the large, polyploid genome of wheat poses an obstacle to identifying GS determinants using map-based cloning, a translational genomics approach using GS regulators identified in the model plants rice and Arabidopsis as candidate genes appears to be effective and supports a hypothesis that a conserved genetic network regulates GS in rice and wheat. In this review, we summarize the progress in the studies on GS in the model plants and wheat and identify 45 GS candidate loci in the wheat genome. In silico mapping of these GS loci in the diploid wheat and barley genomes showed (1) several gene families amplified in the wheat lineage, (2) a significant number of the GS genes located in the proximal regions surrounding the centromeres, and (3) more than half of candidate genes to be negative regulators, or their expression negatively related by microRNAs. Identifying and mapping the wheat GS gene homologs will not only facilitate candidate gene analysis, but also open the door to improving wheat yield using reverse genetics approaches by mining desired alleles in landraces and wild ancestors and to developing novel germplasm by TILLING and genome editing technologies.

A 4-gigabase physical map unlocks the structure and evolution of the complex genome of Aegilops tauschii, the wheat D-genome progenitor.

The current limitations in genome sequencing technology require the construction of physical maps for high-quality draft sequences of large plant genomes, such as that of Aegilops tauschii, the wheat D-genome progenitor. To construct a physical map of the Ae. tauschii genome, we fingerprinted 461,706 bacterial artificial chromosome clones, assembled contigs, designed a 10K Ae. tauschii Infinium SNP array, constructed a 7,185-marker genetic map, and anchored on the map contigs totaling 4.03 Gb. Using whole genome shotgun reads, we extended the SNP marker sequences and found 17,093 genes and gene fragments. We showed that collinearity of the Ae. tauschii genes with Brachypodium distachyon, rice, and sorghum decreased with phylogenetic distance and that structural genome evolution rates have been high across all investigated lineages in subfamily Pooideae, including that of Brachypodieae. We obtained additional information about the evolution of the seven Triticeae chromosomes from 12 ancestral chromosomes and uncovered a pattern of centromere inactivation accompanying nested chromosome insertions in grasses. We showed that the density of noncollinear genes along the Ae. tauschii chromosomes positively correlates with recombination rates, suggested a cause, and showed that new genes, exemplified by disease resistance genes, are preferentially located in high-recombination chromosome regions.

Fine mapping of shattering locus Br2 reveals a putative chromosomal inversion polymorphism between the two lineages of Aegilops tauschii.

KEY MESSAGE: This work laid the foundation for cloning of shattering gene Br2 and provided first line of evidence that two major Aegilops tauschii lineages are differentiated by an inversion polymorphism. Chromosome inversions often accompany population differentiation and capture local adaptation during speciation. Aegilops tauschii, the D-genome donor species of hexaploid wheat, consists of two genetically isolated lineages, L1 and L2, but little is known about the genetic mechanisms underlying the population differentiation in this diploid species. During fine mapping of the shattering gene Br2 using a large F2 population derived from a cross between TA1604 (an L1 accession) and AL8/78 (an L2 accession), we found contrasting patterns of crossover distribution in the Br2 interval and neighboring regions despite the high local gene synteny with Brachypodium distachyon and rice. Br2 was localized in a 0.08-cM interval, and 13 marker loci formed a block, where single-crossovers were completely suppressed, but double-crossovers were enriched with a recombination rate of ~11 cM/Mb. In contrast, in a neighboring region no double-crossover was recovered, but single-crossover rate reached 24 cM/Mb, which is much higher than the genome-wide average. This result suggests a putative inversion polymorphism between the parental lines in the Br2 region. Genotyping using the markers from the Br2 region divided a collection of 55 randomly sampled A. tauschii accessions into two major groups, and they are largely genetically isolated. The two groups correspond to the L1 and L2 lineages based on their geographic distribution patterns. This provides first evidence that inversions may underlie the evolution of A. tauschii lineages. The presence of inter-lineage inversions may complicate map-based cloning in A. tauschii and transfer of useful traits to wheat.

The chloroplast view of the evolution of polyploid wheat.

Polyploid wheats comprise four species: Triticum turgidum (AABB genomes) and T. aestivum (AABBDD) in the Emmer lineage, and T. timopheevii (AAGG) and T. zhukovskyi (AAGGA(m) A(m) ) in the Timopheevi lineage. Genetic relationships between chloroplast genomes were studied to trace the evolutionary history of the species. Twenty-five chloroplast genomes were sequenced, and 1127 plant accessions were genotyped, representing 13 Triticum and Aegilops species. The A. speltoides (SS genome) diverged before the divergence of T. urartu (AA), A. tauschii (DD) and the Aegilops species of the Sitopsis section. Aegilops speltoides forms a monophyletic clade with the polyploid Emmer and Timopheevi wheats, which originated within the last 0.7 and 0.4 Myr, respectively. The geographic distribution of chloroplast haplotypes of the wild tetraploid wheats and A. speltoides illustrates the possible geographic origin of the Emmer lineage in the southern Levant and the Timopheevi lineage in northern Iraq. Aegilops speltoides is the closest relative of the diploid donor of the chloroplast (cytoplasm), as well as the B and G genomes to Timopheevi and Emmer lineages. Chloroplast haplotypes were often shared by species or subspecies within major lineages and between the lineages, indicating the contribution of introgression to the evolution and domestication of polyploid wheats.

Comparative analysis of syntenic genes in grass genomes reveals accelerated rates of gene structure and coding sequence evolution in polyploid wheat.

Cycles of whole-genome duplication (WGD) and diploidization are hallmarks of eukaryotic genome evolution and speciation. Polyploid wheat (Triticum aestivum) has had a massive increase in genome size largely due to recent WGDs. How these processes may impact the dynamics of gene evolution was studied by comparing the patterns of gene structure changes, alternative splicing (AS), and codon substitution rates among wheat and model grass genomes. In orthologous gene sets, significantly more acquired and lost exonic sequences were detected in wheat than in model grasses. In wheat, 35% of these gene structure rearrangements resulted in frame-shift mutations and premature termination codons. An increased codon mutation rate in the wheat lineage compared with Brachypodium distachyon was found for 17% of orthologs. The discovery of premature termination codons in 38% of expressed genes was consistent with ongoing pseudogenization of the wheat genome. The rates of AS within the individual wheat subgenomes (21%-25%) were similar to diploid plants. However, we uncovered a high level of AS pattern divergence between the duplicated homeologous copies of genes. Our results are consistent with the accelerated accumulation of AS isoforms, nonsynonymous mutations, and gene structure rearrangements in the wheat lineage, likely due to genetic redundancy created by WGDs. Whereas these processes mostly contribute to the degeneration of a duplicated genome and its diploidization, they have the potential to facilitate the origin of new functional variations, which, upon selection in the evolutionary lineage, may play an important role in the origin of novel traits.

Fine mapping and metabolic and physiological characterization of the glume glaucousness inhibitor locus Iw3 derived from wild wheat.

KEY MESSAGE: This research provided the first view of metabolic and physiological effect of a tissue-specific glaucousness inhibitor in wheat and laid foundation for map-based cloning of the Iw3 locus. Cuticular wax constitutes the outermost layer of plant skin, and its composition greatly impacts plant appearance and plant-environment interaction. Epicuticular wax in the upper part of adult wheat plants can form the glaucousness, which is associated with drought tolerance. In this research, we characterized a glume-specific glaucousness inhibitor, Iw3, by fine mapping, physiological, and molecular approaches. Iw3 inhibits glaucousness formation by altering wax composition. Compared to the wild type, Iw3 eliminated ß-diketone, reduced 47 % primary alcohols, but increased aldehyde 400-fold and alkanes fivefold, which led to 30 % reduction of total glume wax load. Loss of the glaucousness increased cuticle permeability, suggesting an important role in drought sensitivity. Genetically, the glaucousness-inhibiting effect by Iw3 is partially dominant in a dosage-dependent manner. We localized the Iw3 locus within a 0.13-cM interval delimited by marker loci Xpsp3000 and XWL3096. Of the 53 wax genes assayed, we detected transcription changes in nine genes by Iw3, downregulation of Cer4-1 and upregulation of other five Cer4 and three KCS homologs. All these results provided initial insights into Iw3-mediated regulation of wax metabolism and paved way for in-depth characterization of the Iw3 locus and the glaucousness-related ß-diketone pathway.

Supergravity-Steered Generic Manufacturing of Nanosheets-Embedded Nanocomposite Hydrogel with Highly Oriented, Heterogeneous Architecture.

Designing nanocomposite hydrogels with oriented nanosheets has emerged as a promising toolkit to achieve preferential performances that go beyond their disordered counterparts. Although current fabrication strategies via electric/magnetic force fields have made remarkable achievements, they necessitate special properties of nanosheets and suffer from an inferior orientation degree of nanosheets. Herein, a facile and universal approach is discovered to elaborate MXene-based nanocomposite hydrogels with highly oriented, heterogeneous architecture by virtue of supergravity to replace conventional force fields. The key to such architecture is to leverage bidirectional, force-tunable attributes of supergravity containing coupled orthogonal shear and centrifugal force field for steering high-efficient movement, pre-orientation, and stacking of MXene nanosheets in the bottom. Such a synergetic effect allows for yielding heterogeneous nanocomposite hydrogels with a high-orientation MXene-rich layer (orientation degree, f = 0.83) and a polymer-rich layer. The authors demonstrate that MXene-based nanocomposite hydrogels leverage their high-orientation, heterogeneous architecture to deliver an extraordinary electromagnetic interference shielding effectiveness of 55.2 dB at 12.4 GHz yet using a super-low MXene of 0.3 wt%, surpassing most hydrogels-based electromagnetic shielding materials. This versatile supergravity-steered strategy can be further extended to arbitrary nanosheets including MoS2, GO, and C3N4, offering a paradigm in the development of oriented nanocomposites.

A non-additive interaction in a single locus causes a very short root phenotype in wheat.

Non-additive allelic interactions underlie over dominant and under dominant inheritance, which explain positive and negative heterosis. These heteroses are often observed in the aboveground traits, but rarely reported in root. We identified a very short root (VSR) phenotype in the F1 hybrid between the common wheat (Triticum aestivum L.) landrace Chinese Spring and synthetic wheat accession TA4152-71. When germinated in tap water, primary roots of the parental lines reached ~15 cm 10 days after germination, but those of the F1 hybrid were ~3 cm long. Selfing populations segregated at a 1 (long-root) to 1 (short-root) ratio, indicating that VSR is controlled by a non-additive interaction between two alleles in a single gene locus, designated as Vsr1. Genome mapping localized the Vsr1 locus in a 3.8-cM interval delimited by markers XWL954 and XWL2506 on chromosome arm 5DL. When planted in vermiculite with supplemental fertilizer, the F1 hybrid had normal root growth, virtually identical to the parental lines, but the advanced backcrossing populations segregated for VSR, indicating that the F1 VSR expression was suppressed by interactions between other genes in the parental background and the vermiculite conditions. Preliminary physiological analyses showed that the VSR suppression is independent of light status but related to potassium homeostasis. Phenotyping additional hybrids between common wheat and synthetics revealed a high VSR frequency and their segregation data suggested more Vsr loci involved. Because the VSR plants can be regularly maintained and readily phenotyped at the early developmental stage, it provides a model for studies of non-additive interactions in wheat.

Urbanization expands the fluctuating difference in gross primary productivity between urban and rural areas from 2000 to 2018 in China.

Urban and rural vegetation are affected by both climate change and human activities, but the role of urbanization in vegetation productivity is unclear given the dual impacts. Here, we delineated urban area (UA) and rural area (RA), quantified the relative impacts of climate change and human activities on gross primary production (GPP) in 34 major cities (MCs) in China from 2000 to 2018, and analyzed the intrinsic impacts of urbanization on GPP. First, we found that the total urban impervious surface coverage (ISC) of the 34 MCs increased by 13.25 % and the mean annual GPP increased by 211 gC m-2 during the study period. GPP increased significantly in urban core areas, but decreased significantly in urban expansion areas, which was mainly due to a large amount of vegetation loss due to land use conversion. Second, the variability of GPP in UA was generally lower than in RA. Both climate change and human activities had a positive impact on GPP in UA and RA in the 34 MCs, of which the contribution was 49 % and 51 % in UA, and 76 % and 24 % in RA, respectively. Third, under climate change and human activities, the increase in GPP offset 4.96 % and 12.35 % of the impact of land use conversion on GPP in 2000 and 2018, respectively, which indicated that the offset strengthened over time. These findings emphasize the role of human activities in promoting carbon sequestration in urban vegetation, which is crucial for better understanding the processes and mechanisms of urban carbon cycles. Decision-makers can manage urban vegetation based on vegetation carbon sequestration potential as regions urbanize, aiding comprehensive decision-making.

Integrating Preoperative Computed Tomography and Clinical Factors for Lymph Node Metastasis Prediction in Esophageal Squamous Cell Carcinoma by Feature-Wise Attentional Graph Neural Network.

PURPOSE: This study aimed to propose a regional lymph node (LN) metastasis prediction model for patients with esophageal squamous cell carcinoma (ESCC) that can learn and adaptively integrate preoperative computed tomography (CT) image features and nonimaging clinical parameters. METHODS AND MATERIALS: Contrast-enhanced CT scans taken 2 weeks before surgery and 20 clinical factors, including general, pathologic, hematological, and diagnostic information, were collected from 357 patients with ESCC between October 2013 and November 2018. There were 999 regional LNs (857 negative, 142 positive) with pathologically confirmed status after surgery. All LNs were randomly divided into a training set (n = 738) and a validation set (n = 261) for testing. The feature-wise attentional graph neural network (FAGNN) was composed of (1) deep image feature extraction by the encoder of 3-dimensional UNet and high-level nonimaging factor representation by the clinical parameter encoder; (2) a feature-wise attention module for feature embedding with learnable adaptive weights; and (3) a graph attention layer to integrate the embedded features for final LN level metastasis prediction. RESULTS: Among the 4 models we constructed, FAGNN using both CT and clinical parameters as input is the model with the best performance, and the area under the curve (AUC) reaches 0.872, which is better than manual CT diagnosis method, multivariable model using CT only (AUC = 0.797), multivariable model with combined CT and clinical parameters (AUC = 0.846), and our FAGNN using CT only (AUC = 0.853). CONCLUSIONS: Our adaptive integration model improved the metastatic LN prediction performance based on CT and clinical parameters. Our model has the potential to foster effective fusion of multisourced parameters and to support early prognosis and personalized surgery or radiation therapy planning in patients with ESCC.

A diploid wheat TILLING resource for wheat functional genomics.

BACKGROUND: Triticum monococcum L., an A genome diploid einkorn wheat, was the first domesticated crop. As a diploid, it is attractive genetic model for the study of gene structure and function of wheat-specific traits. Diploid wheat is currently not amenable to reverse genetics approaches such as insertion mutagenesis and post-transcriptional gene silencing strategies. However, TILLING offers a powerful functional genetics approach for wheat gene analysis. RESULTS: We developed a TILLING population of 1,532 M2 families using EMS as a mutagen. A total of 67 mutants were obtained for the four genes studied. Waxy gene mutation frequencies are known to be 1/17.6 - 34.4 kb DNA in polyploid wheat TILLING populations. The T. monococcum diploid wheat TILLING population had a mutation frequency of 1/90 kb for the same gene. Lignin biosynthesis pathway genes- COMT1, HCT2, and 4CL1 had mutation frequencies of 1/86 kb, 1/92 kb and 1/100 kb, respectively. The overall mutation frequency of the diploid wheat TILLING population was 1/92 kb. CONCLUSION: The mutation frequency of a diploid wheat TILLING population was found to be higher than that reported for other diploid grasses. The rate, however, is lower than tetraploid and hexaploid wheat TILLING populations because of the higher tolerance of polyploids to mutations. Unlike polyploid wheat, most mutants in diploid wheat have a phenotype amenable to forward and reverse genetic analysis and establish diploid wheat as an attractive model to study gene function in wheat. We estimate that a TILLING population of 5, 520 will be needed to get a non-sense mutation for every wheat gene of interest with 95% probability.

Chromosome arm-specific BAC end sequences permit comparative analysis of homoeologous chromosomes and genomes of polyploid wheat.

BACKGROUND: Bread wheat, one of the world's staple food crops, has the largest, highly repetitive and polyploid genome among the cereal crops. The wheat genome holds the key to crop genetic improvement against challenges such as climate change, environmental degradation, and water scarcity. To unravel the complex wheat genome, the International Wheat Genome Sequencing Consortium (IWGSC) is pursuing a chromosome- and chromosome arm-based approach to physical mapping and sequencing. Here we report on the use of a BAC library made from flow-sorted telosomic chromosome 3A short arm (t3AS) for marker development and analysis of sequence composition and comparative evolution of homoeologous genomes of hexaploid wheat. RESULTS: The end-sequencing of 9,984 random BACs from a chromosome arm 3AS-specific library (TaaCsp3AShA) generated 11,014,359 bp of high quality sequence from 17,591 BAC-ends with an average length of 626 bp. The sequence represents 3.2% of t3AS with an average DNA sequence read every 19 kb. Overall, 79% of the sequence consisted of repetitive elements, 1.38% as coding regions (estimated 2,850 genes) and another 19% of unknown origin. Comparative sequence analysis suggested that 70-77% of the genes present in both 3A and 3B were syntenic with model species. Among the transposable elements, gypsy/sabrina (12.4%) was the most abundant repeat and was significantly more frequent in 3A compared to homoeologous chromosome 3B. Twenty novel repetitive sequences were also identified using de novo repeat identification. BESs were screened to identify simple sequence repeats (SSR) and transposable element junctions. A total of 1,057 SSRs were identified with a density of one per 10.4 kb, and 7,928 junctions between transposable elements (TE) and other sequences were identified with a density of one per 1.39 kb. With the objective of enhancing the marker density of chromosome 3AS, oligonucleotide primers were successfully designed from 758 SSRs and 695 Insertion Site Based Polymorphisms (ISBPs). Of the 96 ISBP primer pairs tested, 28 (29%) were 3A-specific and compared to 17 (18%) for 96 SSRs. CONCLUSION: This work reports on the use of wheat chromosome arm 3AS-specific BAC library for the targeted generation of sequence data from a particular region of the huge genome of wheat. A large quantity of sequences were generated from the A genome of hexaploid wheat for comparative genome analysis with homoeologous B and D genomes and other model grass genomes. Hundreds of molecular markers were developed from the 3AS arm-specific sequences; these and other sequences will be useful in gene discovery and physical mapping.

Dynamic Multi-projection Mapping Based on Parallel Intensity Control.

Projection mapping using multiple projectors is promising for spatial augmented reality; however, it is difficult to apply it to dynamic scenes. This is because the conventional method decides all pixel intensities of multiple images simultaneously based on the global optimization method, and it is hard to reduce the latency from motion to projection. To mitigate this, we propose a novel method of controlling the intensity based on a pixel-parallel calculation for each projector in real-time with low latency. This parallel calculation leverages the insight that the projected pixels from different projectors in overlapping areas can be approximated independently if the pixel is sufficiently small relative to the surface structure. Additionally, our pixel-parallel calculation method allows a distributed system configuration, such that the number of projectors can be increased to form a network for high scalability. We demonstrate a seamless mapping into dynamic scenes at 360 fps with a 9.5-ms latency using ten cameras and four projectors.

Haze Occurrence Caused by High Gas-to-Particle Conversion in Moisture Air under Low Pollutant Emission in a Megacity of China.

Haze occurred in Zhengzhou, a megacity in the northern China, with the PM2.5 as high as 254 µg m-3 on 25 December 2019, despite the emergency response measure of restriction on the emission of anthropogenic pollutants which was implemented on December 19 for suppressing local air pollution. Air pollutant concentrations, chemical compositions, and the origins of particulate matter with aerodynamic diameter smaller than 2.5 µm (PM2.5) between 5-26 December were investigated to explore the reasons for the haze occurrence. Results show that the haze was caused by efficient SO2-to-suflate and NOx-to-nitrate conversions under high relative humidity (RH) condition. In comparison with the period before the restriction (5-18 December) when the PM2.5 was low, the concentration of PM2.5 during the haze (19-26 December) was 173 µg m-3 on average with 51% contributed by sulfate (31 µg m-3) and nitrate (57 µg m-3). The conversions of SO2-to-sulfate and NOx-to-nitrate efficiently produced sulfate and nitrate although the concentration of the two precursor gases SO2 and NOx was low. The high RH, which was more than 70% and the consequence of artificial water-vapor spreading in the urban air for reducing air pollutants, was the key factor causing the conversion rates to be enlarged in the constriction period. In addition, the last 48 h movement of the air parcels on 19-26 December was stagnant, and the air mass was from surrounding areas within 200 km, indicating weather conditions favoring the accumulation of locally-originated pollutants. Although emergency response measures were implemented, high gas-to-particle conversions in stagnant and moisture circumstances can still cause severe haze in urban air. Since the artificial water-vapor spreading in the urban air was one of the reasons for the high RH, it is likely that the spreading had unexpected side effects in some certain circumstances and needs to be taken into consideration in future studies.