Two-thirds anteroposterior ramus length is the preferred osteotomy point for intraoral vertical ramus osteotomy.

OBJECTIVES: This study aimed to investigate the mandibular canal of ramus and design a suitable osteotomy line for intraoral vertical ramus osteotomy (IVRO) using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Ninety patients were classified into class I, II, and III skeletal pattern groups. When extended from the horizontal base plane (0 mm, mandibular foramen [MF]), with a 2-mm section interval, to 10 mm above and 10 mm below the MF, the following landmarks were identified: external oblique ridge (EOR), posterior border of the ramus (PBR), and posterior lateral cortex of ramus (PLC): IVRO osteotomy point. RESULTS: In the base plane (0-mm plane), the EOR-PBR distance of class III (34.78 mm) and the IOR-PBR distance of class II (32.72 mm) were significantly higher than those of class I (32.95 mm and 30.03 mm). Compared to the EOR-PLC distance, the designed osteotomy point (two-thirds EOR-PBR length) has a 3.49-mm safe zone at the base plane and ranging from 0.89 mm (+ 10-mm plane) to 8.37 mm (- 10-mm plane). CONCLUSIONS: The position at two-thirds EOR-PBR length (anteroposterior diameter of the ramus) can serve as a reference distance for the IVRO osteotomy position. CLINICAL RELEVANCE: Mandibular setback operations for treating mandibular prognathism mainly include sagittal split ramus osteotomy (SSRO) and IVRO. IVRO has a markedly lower incidence of postoperative lower lip paraesthesia than SSRO. Our design presented a reference point for identification during IVRO, to prevent damage to the inferior alveolar neurovascular bundle.

Importance in the occurrence rate of shortest buccal bone marrow distance (<1 mm) for sagittal split ramus osteotomy.

BACKGROUND/PURPOSE: The neurosensory disturbance is a common complication following sagittal split ramus osteotomy (SSRO) whereas the shortest buccal bone marrow (SBM) is an important risk factor. The present study aimed to investigate the relationship between the occurrence rates of SBM among three skeletal patterns. METHODS: The cone-beam computed tomography (CBCT) images of 90 participants were divided into skeletal Class I, II, and III. There were six horizontal planes separated apart by a 2 mm interval; it started with plane 0 (original intact mandibular canal) to plane 5 which was 10 mm below. The data of SBM were divided into two groups (SBM ≥ 1 mm and SBM < 1 mm). With an SBM value < 1 mm, we defined a high occurrence rate of postoperative neurosensory abnormality or unfavorable split. RESULTS: The Class III patients had the smallest SBM value (1.31-1.75 mm) whereas the Class II patients had the largest SBM value (1.57-2.09 mm). For the Class III patients, the highest and lowest occurrence rates of SBM were 56.5% and 43.5% respectively. For the Class II patients, the highest and lowest occurrence rates of SBM were 37.1% and 17.7% respectively. The patients with Class III malocclusion had higher occurrence rates of SBM than the patients with Class II malocclusion. CONCLUSION: Class III had a significantly higher occurrence of probability (SBM < 1 mm) than Class II. Therefore, patients with Class III were more likely to experience postoperative neurosensory abnormalities and unfavorable split than patients with Class II.

Morphological Study of the Mandibular Lingula and Antilingula by Cone-Beam Computed Tomography.

The patterns of the lingula and antilingula are crucial surgical reference points for ramus osteotomy. Cone-beam computed tomography (CBCT) provides three-dimensional images, and patient radiation dose is significantly lower for CBCT than for medical CT. The morphology of the mandibular lingula and antilingula of ninety patients (180 sides) were investigated using CBCT. The lingula were classified as having triangular, truncated, nodular, and assimilated shapes. The antilingula were classified as having hill, ridge, plateau, and plain shapes. The patients' sex, skeletal patterns (Classes I, II, and III), and right and left sides were recorded. The most to least common lingula shapes were nodular (37.8%), followed by truncated (32.8%), triangular (24.4%), and assimilated (5%). The most to least common antilingulae were hill (62.8%), plain (18.9%), plateau (13.9%), and ridge (4.4%) patterns, respectively. The lingula and antilingula had identical patterns on both sides in 47 (52.2%) and 46 patients (51.1%), respectively. Sex and skeletal pattern were not significantly correlated to lingula and antilingula shapes. No significant correlation was observed between lingula and antilingula shapes.

Sagittal Split Ramus Osteotomy in the Shortest Buccal Bone Marrow Distances of the Mandible on the Coronal Plane.

PURPOSE: This study investigated the relationship between the shortest buccal bone marrow of the ramus and skeletal patterns. MATERIALS AND METHODS: Using cone-beam computed tomography data (specifically, the A point-nasion-B point (ANB) angle), we divided patients into three groups as follows: skeletal class I (0° < ANB < 4°), class II (ANB: ≥4°), and class III (ANB: ≤0°). Sixteen vertical sections in the coronal plane were taken starting from slice 0 (original intact mandibular canal) anteriorly at 2 mm intervals to slice 15 (30 mm). The thickness of the mandible (M) and shortest buccal bone marrow (SBM) were measured. The data of SBM were divided into two groups (SBM ≥ 1 mm and SBM < 1 mm). For each skeletal pattern, an SBM value < 1 mm was considered to indicate a high possibility of postoperative nerve paresthesia and bad split. RESULTS: The three skeletal pattern groups also did not significantly differ in their M values for all sections. The mean SBM values of class III (0.91-2.11 mm) at 6-16 mm anterior to the mandibular foramen were significantly smaller than those of class II (1.53-3.17 mm). Comparing the occurrence ratio of SBM < 1 mm, the highest and lowest probabilities in class III (55% and 21.7%, respectively) were significantly larger at 6-20 mm anterior to the mandibular foramen than those in class II (28.3% and 5%, respectively). CONCLUSION: Class III had a significantly shorter SBM distance and higher SBM occurrence probability than class II at the mandibular ramus region, implying that class III participants are more likely than class II participants to have nerve paresthesia and bad split after sagittal split ramus osteotomy.

Differences in the Buccal Bone Marrow Distance of ≤0.8 mm in the Mandible of Patients Undergoing Sagittal Split Ramus Osteotomy among the Different Skeletal Patterns: A Retrospective Study.

This study investigated the relationship between the thickness of the ramus and skeletal patterns using cone-beam computed tomography (CBCT) for sagittal split ramus osteotomy. Ninety participants were categorized into three skeletal patterns (Class I, Class II, and Class III). The first vertical slice (slice 0) was observed in the intact mandibular canal, and then moved forward to 40 mm (slice 21) with a 2 mm interval. The thickness of buccal bone marrow (B value) was measured. A B value of ≤0.8 mm was considered to be the major risk factor causing the occurrence of postoperative lower lip paresthesia. There were 461 sides with a B value of ≤0.8 mm. There was a significant difference in the skeletal patterns [Class III (198 sides: 15.7%) > Class I (159 sides: 12.6%) > Class II (104 sides: 8.3%)]. Class II participants had significantly larger B values (2.14 to 3.76 mm) and a lower occurrence rate (≤0.8 mm) than those of Class III participants (1.5 to 3 mm) in front of the mandibular foramen (from 6 mm to 20 mm). Class III participants had significantly shorter buccal bone marrow distance and a higher occurrence rate of B values (≤0.8 mm) than Class II.

Dimension and Location of the Mandibular Lingula: Comparisons of Gender and Skeletal Patterns Using Cone-Beam Computed Tomography.

OBJECTIVE: The study aimed to investigate and measure the anatomical relationship between the mandibular lingula (Li) and skeletal patterns using cone-beam computed tomography (CBCT). Materials and Methods. In total, 72 participants (23 men and 49 women) were categorized into three groups according to their skeletal patterns (specifically, the A point-nasion-B point (ANB]) angle) as follows: Class I (0° < ANB < 4°), Class II (ANB ≥ 4°), and Class III (ANB ≤ 0°). The CBCT images of 144 rami were collected, and the distance from the Li to the external oblique ridge (Li-EOR), internal oblique ridge (Li-IOR), posterior border of the ramus (Li-PBR), inferior border of the ramus (Li-IBR), sigmoid notch (Li-Sm), and mandibular foramen (Li-MF) was examined. The Li-hMF (horizontal distance from the Li to the MF) and Li-vMF (vertical distance from the Li to the MF) were measured. The comparisons of gender, side (right and left), and skeletal patterns were then evaluated by statistical analysis. RESULTS: The values of the Li-EOR and Li-PBR (19.99 mm and 15.93 mm, respectively) were significantly higher in men than in women (18.85 mm and 14.89 mm, respectively). Moreover, the Li-IBR was higher in men (32.91 mm) than in women (30.40 mm). Both sides (right and left) and skeletal patterns demonstrated that the Li-EOR, Li-IOR, and Li-PBR were not significantly different. Pearson's correlation test reported a strong correlation between the Li-EOR and Li-IOR (r=0.610). CONCLUSION: The distances from mandibula lingula to the external oblique ridge, posterior border of ramus, and inferior border of ramus were significantly longer in men than in women. Similarly, both horizontal and vertical distances from the lingula to the mandibular foramen were significantly longer in men than in women. Therefore, the results demonstrated that the Li was longer and more protruding in men than in women. With respect to the horizontal distance from the mandibular lingula to the mandibular foramen, of the three types of the skeletal system (Class I, Class II, and Class III), Class III was the significantly largest.

Molecular dynamics simulations of nanoindentation and scratch in Cu grain boundaries.

The dynamic nanomechanical characteristics of Cu films with different grain boundaries under nanoindentation and scratch conditions were studied by molecular dynamics (MD) simulations. The type of grain boundary is the main factor in the control of the substrate atoms with respect to the size of dislocations since the existence of the grain boundary itself restricts the movement associated with dislocations. In this work, we analyzed the transverse and vertical grain boundaries for different angles. From the simulation results, it was found that the sample with a transverse grain boundary angle of 20° had a higher barrier effect on the slip band as compared to samples with other angles. Moreover, the nanoindentation results (i.e., indentation on the upper area) of the vertical grain boundary showed that the force was translated along the grain boundary, thereby producing intergranular fractures.

Rolling Resistance and Mechanical Properties of Grinded Copper Surfaces Using Molecular Dynamics Simulation.

Mechanical properties of copper (Cu) film under grinding process were accomplished by molecular dynamics simulation. A numerical calculation was carried out to understand the distributions of atomic and slip vector inside the Cu films. In this study, the roller rotation velocity, temperature, and roller rotation direction change are investigated to clarify their effect on the deformation mechanism. The simulation results showed that the destruction of materials was increased proportionally to the roller rotation velocity. The machining process at higher temperature results in larger kinetic energy of atoms than lower temperature during the grinding process of the Cu films. The result also shows that the roller rotation in the counterclockwise direction had the better stability than the roller rotation in the clockwise direction due to significantly increased backfill atoms in the groove of the Cu film surface. Additionally, the effects of the rolling resistances on the Cu film surfaces during the grinding process are studied by the molecular dynamics simulation method.