RESUMO
The direct production of hydrogen peroxide (H2O2) through photocatalytic reaction via H2O and O2 is considered as an ideal approach. However, the efficiency of H2O2 generation is generally limited by insufficient charge and mass transfer. Covalent organic framework (COFs) offer a promising platform as metal-free photocatalyst for H2O2 production due to their potential for rational design at the molecular level. Herein, we integrated the multipolar structures and carboxyl groups into COFs to enhance the efficiency of photocatalytic H2O2 production in pure water without any sacrificial agents. The introduction of octupolar and quadrupolar structures, along with an increase of molecular planarity, created efficient oxygen reduction reaction (ORR) sites. Meanwhile, carboxyl groups could not only boost O2 and H2O2 movement via enhancement of pore hydrophilicity, but also promote proton conduction, enabling the conversion to H2O2 from ·O2-, which is the crucial intermediate product in H2O2 photocatalysis. Overall, we demonstrate that TACOF-1-COOH, consisting of optimal octupolar and quadrupolar structures, along with enrichment sites (carboxyl groups), exhibited a H2O2 yield rate of 3542 µmol h-1 g-1 and a solar-to-chemical (SCC) efficiency of 0.55%. This work provides valuable insights for designing metal-free photocatalysts for efficient H2O2 production.
RESUMO
We explored the application of two-dimensional covalent organic frameworks (2D COFs) in single molecule DNA analysis. Two ultrathin COF nanosheets were exfoliated with pore sizes of 1.1 nm (COF-1.1) and 1.3 nm (COF-1.3) and covered closely on a quartz nanopipette with an orifice of 20 ± 5 nm. COF nanopores exhibited high size selectivity for fluorescent dyes and DNA molecules. The transport of long (calf thymus DNA) and short (DNA-80) DNA molecules through the COF nanopores was studied. Because of the strong interaction between DNA bases and the organic backbones of COFs, the DNA-80 was transported through the COF-1.1 nanopore at a speed of 270 µs/base, which is the slowest speed ever observed compared with 2D inorganic nanomaterials. This study shows that the COF nanosheet can work individually as a nanopore monomer with controllable pore size like its biological counterparts.
Assuntos
Estruturas Metalorgânicas , Nanoporos , DNA , Corantes FluorescentesRESUMO
Nitrogen-heterocycle-based covalent organic frameworks (COFs) are considered promising candidates for the overall photosynthesis of hydrogen peroxide (H2 O2 ). However, the effects of the relative nitrogen locations remain obscured and photocatalytic performances of COFs need to be further improved. Herein, a collection of COFs functionalized by various diazines including pyridazine, pyrimidine, and pyrazine have been judiciously designed and synthesized for photogeneration of H2 O2 without sacrificial agents. Compared with pyrimidine and pyrazine, pyridazine embedded in TpDz tends to stabilize endoperoxide intermediate species, leading toward the more efficient direct 2e- oxygen reduction reaction (ORR) pathway. Benefiting from the effective electron-hole separation, low charge transfer resistance, and high-efficiency ORR pathway, an excellent production rate of 7327â µmol g-1 h-1 and a solar-to-chemical conversion (SCC) value of 0.62 % has been achieved by TpDz, which ranks one of the best COF-based photocatalysts. This work might shed fresh light on the rational design of functional COFs targeting photocatalysts in H2 O2 production.
RESUMO
Covalent organic framework (COF) membranes with tailored functionalities hold great promise in diverse applications, but the key to realize their full advantages of highly ordered pore structures is the development of membrane fabrication approaches. In this work, we report a potential difference-modulated biphasic strategy to fabricate large-area, self-standing COF membranes under ambient conditions. The fabrication was conducted at the polarized water/1,2-dichloroethane (water/DCE) interface, where HCl was dissolved in water as a catalyst and monomers (both amine and aldehyde) were added to DCE. The external polarization of the water/DCE interface by cyclic voltammetry can continuously pump H+ from water to DCE to boost the Schiff base reaction of monomers and the growth of COF membranes. Moreover, the growth process can be real-time-monitored by interfacial double-layer capacitance measurement, and the permeability of COF membranes can be in situ-examined by heterogeneous ion transfer voltammetry. Given that the potential difference across the water/DCE interface can be also facilely modulated by dissolving proper electrolyte ions in two phases, the fabrication of large-area COF membranes is made possible in beakers. Using this strategy and different monomers, three types of centimeter-scale, free-standing COF membranes with tunable pore size and surface functionality were prepared, and their defect-free structure was proved by the molecular permeance and ultrafiltration test. We believe that this biphasic strategy offers a controllable and scalable way to fabricate COF membranes and sheds light on development of novel self-supporting membranes with unique functions.
RESUMO
A crack-free micrometer-sized compact structure of 1,3,5-tris(4-aminophenyl)benzene-terephthaldehyde-covalent organic frameworks (TAPB-PDA-COFs) was constructed in situ at the tip of a theta micropipette (TMP). The COF-covered theta micropipette (CTP) then created a stable liquid-gas interface inside COF nanochannels, which was utilized to electrochemically analyze the content and distribution of ammonia gas in the microenvironments. The TMP-based electrochemical ammonia sensor (TEAS) shows a high sensing response, with current increasing linearly from 0 to 50,000 ppm ammonia, owing to the absorption of ammonia gas in the solvent meniscus that connects both barrels of the TEAS. The TEAS also exhibits a short response and recovery time of 5 ± 2 s and 6 ± 2 s, respectively. This response of the ammonia sensor is remarkably stable and repeatable, with a relative standard deviation of 6% for 500 ppm ammonia gas dispensing with humidity control. Due to its fast, reproducible, and stable response to ammonia gas, the TEAS was also utilized as a scanning electrochemical microscopy (SECM) probe for imaging the distribution of ammonia gas in a microspace. This study unlocks new possibilities for using a TMP in designing microscale probes for gas sensing and imaging.
Assuntos
Estruturas Metalorgânicas , Amônia/química , Umidade , Estruturas Metalorgânicas/química , SolventesRESUMO
Ultrathin nanosheets of two-dimensional covalent organic frameworks covered a quartz nanopipette and then acted as a nanopore device for single-molecule DNA sensing. Our results showed that a single DNA homopolymer as short as 6 bases could be detected. The dwell times of 30-mer DNA homopolymers were obviously longer than the times of 10- or 6-mer ones. For different bases, poly(dA)6 showed the slowest transport speed (â¼595 µs/base) compared with cytosine (â¼355 µs/base) in poly(dC)6 and thymine (â¼220 µs/base) in poly(dT)6. Such translocation speeds are the slowest ever reported in two-dimensional material-based nanopores. Poly(dA)6 also showed the biggest current blockade (94.74 pA) compared with poly(dC)6 (79.54 pA) and poly(dT)6 (71.41 pA). However, the present difference in blockade current was not big enough to distinguish the four DNA bases. Our study exhibits the shortest single DNA molecules that can be detected by COF nanopores at the present stage and lights the way for DNA sequencing based on solid-state nanopores.
Assuntos
Estruturas Metalorgânicas , Nanoporos , DNA , Nanotecnologia , Poli A , Análise de Sequência de DNA/métodosRESUMO
Post-synthetic modification (PSM) is a prevalent and powerful strategy to introduce desired functionalities into covalent organic frameworks (COFs) for functional products, expediting their applications vastly. Herein, we demonstrate a PSM strategy for functionalizing brominated COFs via the well-developed Suzuki-Miyaura cross-coupling. By this, a variety of functionalities were installed into COFs efficiently, while the crystallinity and porosity of COFs was well-retained. As a proof-of-concept, BrCOF-2 was modified with trifluoromethyl groups to produce a SF6 adsorbent with remarkably enhanced properties. This facile and versatile approach opens a new door for the synthesis of functional COFs, and greatly expands the scope of their structural design aiming for various properties and applications.
RESUMO
Covalent organic frameworks (COFs) consist nanochannels that are fundamentally important for their application. Up to now, the effect of gas phase on COF nanochannels are hard to explore. Here, TAPB-PDA-COFs (triphenylbenzene-terephthaldehyde-COFs) was synthesized in situ at the tip of a theta micropipette. The COF-covered theta micropipette (CTP) create a stable gas-liquid interface inside the COF nanochannels, through which the humidity-modulated ion mass transfer in the COF nanochannels can be recorded by recording the current across the two channels of the theta micropipette. Results show that the humid air changes the mobility of the ions inside the COF nanochannels, which leads to the change of ionic current. Humid air showed different effects on the ion transfer depending on the solvent polarity index and vapor pressure. Current decreases linearly with the increase of relative humidity (RH) from 11% to 98%. The CTP was also mounted on the scanning electrochemical microscopy as a probe electrode for mapping micrometer-scale humidity distribution.
RESUMO
Layered/two-dimensional covalent organic frameworks (2D COF) are crystalline porous materials composed of light elements linked by strong covalent bonds. Interlayer force is one of the main factors directing the formation of a stacked layer structure, which plays a vital role in the stability, crystallinity, and porosity of layered COFs. The as-developed new way to modulate the interlayer force of imine-linked 2D TAPB-PDA-COF (TAPB = 1,3,5-tris(4-aminophenyl)benzene, PDA = terephthaldehyde) by only adjusting the pH of the solution. At alkaline and neutral pH, the pore size of the COF decreases from 34â Å due to the turbostratic effect. Under highly acidic conditions (pHâ 1), TAPB-PDA-COF shows a faster and stronger turbostratic effect, thus causing the 2D structure to exfoliate. This yields bulk quantities of an exfoliated few/single-layer 2D COF, which was well dispersed and displayed a clear Tyndall effect (TE). Furthermore, nanopipette-based electrochemical testing also confirms the slipping of layers with increase towards acidic pH. A model of pH-dependent layer slipping of TAPB-PDA-COF was proposed. This controllable pH-dependent change in the layer structure may open a new door for potential applications in controlled gas adsorption/desorption and drug loading/releasing.
RESUMO
Covalent organic frameworks (COFs) have garnered enormous attention in anti-cancer therapy recently. However, the intrinsic drawbacks such as poor biocompatibility and low target-specificity greatly restrain the full clinical implementation of COF. Herein, we report a biomimetic multifunctional COF nanozyme, which consists of AIEgen-based COF (TPE-s COF) with encapsulated gold nanoparticles (Au NPs). The nanozyme was co-cultured with HepG2 cells until the cell membrane was fused with lipophilic TPE-s COF-Au@Cisplatin. By using the cryo-shocking method, we fabricated an inactivated form of the TPE-s COF-Au@Cisplatin nanozyme endocytosed in the HepG2 cell membrane (M@TPE-s COF-Au@Cisplatin), which lost their proliferative ability and pathogenicity. Upon laser irradiation, the M@TPE-s COF-Au@Cisplatin nanozymes cleaved, thereby releasing the TPE-s COF-Au nanozyme and Cisplatin to exert their photothermal and drug therapeutic effect. This work opens a new avenue to the synthesis of tumor-derived fluorescent TPE-s COF-Au nanozymes for highly efficient, synergetic, and targeted chemo-photothermal combination therapy of liver cancer.
RESUMO
Cardiac troponin I (cTnI) is an extremely sensitive biomarker for early indication of acute myocardial infarction (AMI). However, it still remains a tough challenge for many newly developed cTnI biosensors to achieve superior sensing performance including high sensitivity, rapid detection, and resistance to interference in clinical serum samples. Herein, a novel photocathodic immunosensor toward cTnI sensing has been successfully developed by designing a unique S-scheme heterojunction based on the porphyrin-based covalent organic frameworks (p-COFs) and p-type silicon nanowire arrays (p-SiNWs). In the novel heterojunction, the p-SiNWs are employed as the photocathode platform to acquire a strong photocurrent response. The in situ-grown p-COFs can accelerate the spatial migration rate of charge carriers by forming proper band alignment with the p-SiNWs. The crystalline π-conjugated network of p-COFs with abundant amino groups also promotes the electron transfer and anti-cTnI immobilizing process. The developed photocathodic immunosensor demonstrates a broad detection range of 5 pg/mL-10 ng/mL and a low limit of detection (LOD) of 1.36 pg/mL in clinical serum samples. Besides, the PEC sensor owns several advantages including good stability and superior anti-interference ability. By comparing our results with that of the commercial ELISA method, the relative deviations range from 0.06 to 0.18% (n = 3), and the recovery rates range from 95.4 to 109.5%. This work displays a novel strategy to design efficient and stable PEC sensing platforms for cTnI detection in real-life serums and provides guidance in future clinical diagnosis.
Assuntos
Técnicas Biossensoriais , Estruturas Metalorgânicas , Infarto do Miocárdio , Porfirinas , Humanos , Técnicas Biossensoriais/métodos , Imunoensaio/métodos , Infarto do Miocárdio/diagnósticoRESUMO
In this work, MoS2 nanosheets were synthesized by the chemical exfoliation method and then modified with a thiol-terminated aptamer via a simple thiol functionalization route. The as-made nanomaterial was characterized by UV-vis absorption spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and transmission electron microscopy. By integrating the advantages of MoS2 nanosheets and the recognition ability of aptamers, the functionalized nanomaterial has been successfully employed for simultaneous enrichment and analysis of sulfadimethoxine by matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). The aptamer-conjugated MoS2 showed an excellent capture ability to eliminate background signals from the species co-existing in a milk sample. The simplicity of the synthesis method and the excellent performance of aptamer-conjugated MoS2 make it an ideal candidate for application in selective MS analysis of the target analyte from complex samples.
Assuntos
Molibdênio , Nanoestruturas , Lasers , Molibdênio/química , Oligonucleotídeos , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , Compostos de SulfidrilaRESUMO
Photocatalytic covalent organic frameworks (COFs) are popular in the field of biomedical materials and also have potential as antimicrobial materials. Herein, a boron-based COF was used in antibacterial applications innovatively. The results of this study suggested that COF-1, the earliest boroxine COF, could produce a variety of reactive oxygen species (ROS) under visible light irradiation. In order to explore more applications of COF-1, antibacterial tests were carried out based on the above results. The test results showed that the material displayed an obvious bactericidal effect on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) by releasing ROS under white light. According to the results of plate coating, all bacteria died after co-cultivation with COF-1 under white light for about 120 minutes. In a word, this study could provide a new idea for the application of boron-based COFs as multifunctional photocatalysts in future.
Assuntos
Estruturas Metalorgânicas , Antibacterianos/farmacologia , Boro/farmacologia , Escherichia coli , Oxigênio , Espécies Reativas de Oxigênio , Staphylococcus aureusRESUMO
There is no doubt that the wide application of COFs depends on the diversity and complexity of their structure and composition, as well as the feasibility and convenience of use. Herein, large area defect-free continuous functional material layers have been fabricated by compounding sub-stoichiometric tetratopic-tritopic covalent organic frameworks (TT-COFs) on graphene oxide (GO) via simply hot pressing. The one-step synthesis of TT-COFs with built-in formyl groups endowed the robust material layers with extraordinary host-guest interactions, so they can specifically reject cations dyes according to adsorption effect, molecular sieving and Donnan effect. Owing to the through-plane molecular transfer channels, large amounts of water molecules can pass through the internal channel rapidly. As a result, high rejection of 99.5% and large flux of 309.99 L·m-2·h-1·bar-1 for dye molecules have been realized. This simple and effective method provided more extensive practicality and greater convenience in recycling and reuse, and demonstrated the utility and high efficiency of TT-COFs with built-in formyl groups as an advanced material platform for dyes removal.
RESUMO
PURPOSE: We aim to investigate the use of covalent organic framework (COF) nanoparticles in the local treatment of glaucoma, both as a means of protecting retinal ganglion cells (RGCs), and as a carrier for delayed release of the medication rapamycin following a single intravitreal injection. METHODS: a water-dispersible COF, and a COF-based nanoplatform for rapamycin release (COF-Rapa) was constructed. C57BL/6J mice were randomly divided into four groups: intravitreal injection of 1.5 µL normal saline (NS), COF (0.67 ng/µL), rapamycin (300 µM) or COF-Rapa (0.67 ng/µL-300 µM), respectively. The ischemia-reperfusion (I/R) model was established to mimic high intraocular pressure (IOP)-induced retinal injury in glaucoma. Labeling of RGCs by Fluoro-Gold and retinal electroretinogram were used to evaluate retinal function. Immunohistochemistry and Western blotting analyses of retinas were performed. RESULTS: COF nanoparticles were delivered in vitro and in vivo. Six weeks after the COF injection, the number of RGCs was unaffected. In addition, the number of RBPMS-positive RGCs, GFAP-positive astrocytes and Iba1-positive microglia did not differ from the normal control. COF could effectively reduce RGCs death, improve phototransduction function and alleviate the overactivation of microglia compared to NS control after retinal I/R injury. Within six weeks, the mammalian target of rapamycin complex 1 (mTORC1) signaling pathway in the retinas could be inhibited by a single intravitreal injection of COF-Rapa. Compared with single COF administration, COF-Rapa significantly reduced the inflammatory reaction after retinal I/R injury. CONCLUSIONS: COF may act as both an RGC protection agent and a carrier for prolonged rapamycin release. This research may lead to the development of novel RGC protection agents and drug delivery techniques, as well as the creation of multifunctional COF-based biomaterials for glaucoma retinopathy.
RESUMO
A two-dimensional MoS2 nanosheet was prepared by a chemical exfoliation method and served as an excellent matrix for the detection of small molecules by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). In comparison with organic matrices (CHCA, 3-AQ) and a graphene matrix, we found that a MoS2 matrix showed better performance in analysis of amino acids, peptides, fatty acids, and sulfonamides. A systematic comparison of the MoS2 matrix with both ion modes showed that mass spectra produced in negative ion mode featured a corresponding single deprotonated ion, which was rather different from the complex multiple alkali metal addition peaks present in positive ion mode. In addition, better sensitivity and reproducibility were obtained in negative ion mode. The ionization mechanism of MoS2 as a matrix in negative ion mode was further discussed. The deproton peak intensity of the analyte fatty acid decreased after the addition of the hole-scavenger KSCN, indicating that the ionization of the fatty acid was caused by the Auger complex effect of MoS2 and electron injection. Experiments have shown that the MoS2 matrix detects small molecules with good repeatability and can perform semiquantitative analysis of sulfonamides. Finally, the MoS2 matrix was employed for quantitative determination of sulfamethoxine in serum samples by an internal standard method. This MoS2-assisted laser desorption/ionization mass spectrometry (MoS2-assisted LDI MS) method provides a simple, rapid, high-throughput approach to evaluate the drug levels in the patient serum and can achieve convenient drug therapy monitoring.
Assuntos
Dissulfetos/química , Molibdênio/química , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , Sulfonamidas/sangue , Humanos , Modelos Lineares , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
Stimuli-responsive films with a dynamic long afterglow feature have received considerable attention in the field of optical materials. Herein, we report the unique dynamic ultralong room temperature phosphorescence (URTP) in flexible solid films made of luminescent carbon dots (CDs) and polyvinylpyrrolidone (PVP). Impressively, fully reversible photo-activation and thermal deactivation of the dynamic long afterglow was achieved in this material, with a lifetime on-off ratio exceeding 3900. Subsequently, ultra-fine URTP patterns (resolution > 1280 dpi) with thermally sensitive retention time were readily photo-printed onto the films and utilized as time-temperature indicating logistics labels with multi-editing capacity. These findings not only enrich the library of dynamic URTP materials, but also extend the scope of the potential applications of luminescent CDs.
RESUMO
The control of charge transfer between radical anions and cations is a promising way for decoding the emission mechanism in electrochemiluminescence (ECL) systems. Herein, a type of donor-acceptor (D-A) covalent organic framework (COF) with triphenylamine and triazine units is designed as a highly efficient ECL emitter with tunable intrareticular charge transfer (IRCT). The D-A COF demonstrates 123 folds enhancement in ECL intensity compared with its benzene-based COF with small D-A contrast. Further, the COF's crystallinity- and protonation-modulated ECL behaviors confirm ECL dependence on intrareticular charge transfer between donor and acceptor units, which is rationalized by density functional theory. Significantly, dual-peaked ECL patterns of COFs are achieved through an IRCT mediated competitive oxidation mechanism: the coreactant-mediated oxidation at lower potential and the direct oxidation at higher potential. This work provides a new fundamental and approach to improve the ECL efficiency for designing next-generation ECL devices.
RESUMO
2D materials exhibit superior properties in electronic and optoelectronic fields. The wide demand for high-performance optoelectronic devices promotes the exploration of diversified 2D materials. Recently, 2D covalent organic frameworks (COFs) have emerged as next-generation layered materials with predesigned π-electronic skeletons and highly ordered topological structures, which are promising for tailoring their optoelectronic properties. However, COFs are usually produced as solid powders due to anisotropic growth, making them unreliable to integrate into devices. Here, by selecting tetraphenylethylene monomers with photoelectric activity, elaborately designed photosensitive 2D-COFs with highly ordered donor-acceptor topologies are in situ synthesized on graphene, ultimately forming COF-graphene heterostructures. Ultrasensitive photodetectors are successfully fabricated with the COFETBC-TAPT -graphene heterostructure and exhibited an excellent overall performance with a photoresponsivity of ≈3.2 × 107 A W-1 at 473 nm and a time response of ≈1.14 ms. Moreover, due to the high surface area and the polarity selectivity of COFs, the photosensing properties of the photodetectors can be reversibly regulated by specific target molecules. The research provides new strategies for building advanced functional devices with programmable material structures and diversified regulation methods, paving the way for a generation of high-performance applications in optoelectronics and many other fields.
RESUMO
Despite the excellent room-temperature phosphorescence (RTP) property of carbon dot (CD)-based RTP composites, the development of these emerging materials with finely tunable afterglow lifetimes still remains a challenge. Herein, for the first time, we report a series of pure organic RTP composite materials based on adjustable polyaniline carbon dots (PACDs) and polymer matrices (polyacrylic acid, polyacrylamide, and polyvinyl alcohol) with tunable RTP lifetimes. By using different polymer matrices and adjusting the functional groups of PACDs, the strength of hydrogen bonding between each polymer matrix and PACDs was regulated, and green RTP emissions with a tunable average lifetime ranging from 184 ms to 652 ms were also realized. In addition, taking advantage of their different persistent afterglow lifetimes, naked-eye-observable and time-resolved anti-counterfeit and data encryption patterns were prepared using these PACDs/polymer composites, demonstrating the potential application of these materials.