Anionic Methacrylate Copolymer Microparticles for the Delivery of Myo-Inositol Produced by Spray-Drying: In Vitro and In Vivo Bioavailability.

In this study, a new micro delivery system based on an anionic methacrylate copolymer, able to improve the biological response of myo-inositol by daily oral administration, was manufactured by spray-drying. It has an ideal dose form for oral administration, with an experimental drug loading (DL)% of 14% and a regulated particle size of less than 15 µm. The new formulation features an improvement on traditional formulations used as a chronic therapy for the treatment of polycystic ovary syndrome. The microparticles' release profile was studied and ex vivo porcine intestinal mucosa permeation experiments were performed to predict potential improvements in oral absorption. Batch n. 3, with the higher Eudragit/MI weight ratio (ratio = 6), showed the best-modified release profiles of the active ingredient, ensuring the lowest myo-inositol loss in an acidic environment. The in vivo evaluation of the myo-inositol micro delivery system was carried out in a rat animal model to demonstrate that the bioavailability of myo-inositol was increased when compared to the administration of the same dosage of the pure active ingredient. The AUC and Cmax of the loaded active molecule in the micro delivery system was improved by a minimum of 1.5 times when compared with the pure substance, administered with same dosage and route. Finally, the increase of myo-inositol levels in the ovary follicles was assessed to confirm that a daily administration of the new formulation improves myo-inositol concentration at the site of action, resulting in an improvement of about 1.25 times for the single administration and 1.66 times after 7 days of repeated administration when compared to pure MI.

Ferritin-Coated SPIONs as New Cancer Cell Targeted Magnetic Nanocarrier.

Superparamagnetic iron oxide nanoparticles (SPIONs) may act as an excellent theragnostic tool if properly coated and stabilized in a biological environment, even more, if they have targeting properties towards a specific cellular target. Humanized Archaeoglobus fulgidus Ferritin (HumAfFt) is an engineered ferritin characterized by the peculiar salt-triggered assembly-disassembly of the hyperthermophile Archaeoglobus fulgidus ferritin and is successfully endowed with the human H homopolymer recognition sequence by the transferrin receptor (TfR1 or CD71), overexpressed in many cancer cells in response to the increased demand of iron. For this reason, HumAfFt was successfully used in this study as a coating material for 10 nm SPIONs, in order to produce a new magnetic nanocarrier able to discriminate cancer cells from normal cells and maintain the potential theragnostic properties of SPIONs. HumAfFt-SPIONs were exhaustively characterized in terms of size, morphology, composition, and cytotoxicity. The preferential uptake capacity of cancer cells toward HumAfFt-SPIONs was demonstrated in vitro on human breast adenocarcinoma (MCF7) versus normal human dermal fibroblast (NHDF) cell lines.

Streptomyces coelicolor Vesicles: Many Molecules To Be Delivered.

Streptomyces coelicolor is a model organism for the study of Streptomyces, a genus of Gram-positive bacteria that undergoes a complex life cycle and produces a broad repertoire of bioactive metabolites and extracellular enzymes. This study investigated the production and characterization of membrane vesicles (MVs) in liquid cultures of S. coelicolor M145 from a structural and biochemical point of view; this was achieved by combining microscopic, physical and -omics analyses. Two main populations of MVs, with different sizes and cargos, were isolated and purified. S. coelicolor MV cargo was determined to be complex, containing different kinds of proteins and metabolites. In particular, a total of 166 proteins involved in cell metabolism/differentiation, molecular processing/transport, and stress response were identified in MVs, the latter functional class also being important for bacterial morpho-physiological differentiation. A subset of these proteins was protected from degradation following treatment of MVs with proteinase K, indicating their localization inside the vesicles. Moreover, S. coelicolor MVs contained an array of metabolites, such as antibiotics, vitamins, amino acids, and components of carbon metabolism. In conclusion, this analysis provides detailed information on S. coelicolor MVs under basal conditions and on their corresponding content, which may be useful in the near future to elucidate vesicle biogenesis and functions. IMPORTANCE Streptomycetes are widely distributed in nature and characterized by a complex life cycle that involves morphological differentiation. They are very relevant in industry because they produce about half of all clinically used antibiotics, as well as other important pharmaceutical products of natural origin. Streptomyces coelicolor is a model organism for the study of bacterial differentiation and bioactive molecule production. S. coelicolor produces extracellular vesicles that carry many molecules, such as proteins and metabolites, including antibiotics. The elucidation of S. coelicolor extracellular vesicle cargo will help us to understand different aspects of streptomycete physiology, such as cell communication during differentiation and response to environmental stimuli. Moreover, the capability of these vesicles for carrying different kinds of biomolecules opens up new biotechnological possibilities related to drug delivery. Indeed, decoding the molecular mechanisms involved in cargo selection may lead to the customization of extracellular vesicle content.

Design, Synthesis and Characterization of a Visible-Light-Sensitive Molecular Switch and Its PEGylation Towards a Self-Assembling Molecule.

HBDI-like chromophores represent a novel set of biomimetic switches mimicking the fluorophore of the green fluorescent protein that are currently studied with the hope to expand the molecular switch/motor toolbox. However, until now members capable of absorbing visible light in their neutral (i. e. non-anionic) form have not been reported. In this contribution we report the preparation of an HBDI-like chromophore based on a 3-phenylbenzofulvene scaffold capable of absorbing blue light and photoisomerizing on the picosecond timescale. More specifically, we show that double-bond photoisomerization occurs in both the E-to-Z and Z-to-E directions and that these can be controlled by irradiating with blue and UV light, respectively. Finally, as a preliminary applicative result, we report the incorporation of the chromophore in an amphiphilic molecule and demonstrate the formation of a visible-light-sensitive nanoaggregated state in water.

Spray-Drying, Solvent-Casting and Freeze-Drying Techniques: a Comparative Study on their Suitability for the Enhancement of Drug Dissolution Rates.

PURPOSE: Solid dispersions (SDs) represent the most common formulation technique used to increase the dissolution rate of a drug. In this work, the three most common methods used to prepare SDs, namely spray-drying, solvent-casting and freeze-drying, have been compared in order to investigate their effect on increasing drug dissolution rate. METHODS: Three formulation strategies were used to prepare a polymer mixture of polyvinyl-alcohol (PVA) and maltodextrin (MDX) as SDs loaded with the following three model drugs, all of which possess a poor solubility: Olanzapine, Dexamethasone, and Triamcinolone acetonide. The SDs obtained were analysed and compared in terms of drug particle size, drug-loading capacity, surface homogeneity, and dissolution profile enhancement. Physical-chemical characterisation was conducted on pure drugs, as well as the formulations made, by way of thermal analysis and infrared spectroscopy. RESULT: The polymers used were able to increase drug saturation solubility. The formulation strategies affected the drug particle size, with the solvent-casting method resulting in more homogenous particle size and distribution when compared to the other methods. The greatest enhancement in the drug dissolution rate was seen for all the samples prepared using the solvent-casting method. CONCLUSION: All of the methods used were able to increase the dissolution rate of the pure drugs alone, however, the solvent-casting method produced SDs with a higher surface homogeneity, drug incorporation capability, and faster dissolution profile than the other techniques.

Influence of Polyvinyl Alcohol (PVA) on PVA-Poly-N-hydroxyethyl-aspartamide (PVA-PHEA) Microcrystalline Solid Dispersion Films.

This study was conducted to formulate buccal films consisting of polyvinyl alcohol (PVA) and poly-N-hydroxyethyl-aspartamide (PHEA), to improve the dissolution of the drug through the oral mucosa. Ibuprofen sodium salt was used as a model drug, and the buccal film was expected to enhance its dissolution rate. Two different concentrations of PVA (5% w/v and 7.5% w/v) were used. Solvent casting was used to prepare films, where a solution consisting of drug and polymer was cast and allowed to dry. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) were used to investigate the properties of films. In vitro dissolution studies were also conducted to investigate drug release. SEM studies showed that films containing a higher concentration of PVA had larger particles in microrange. FTIR studies confirmed the presence of the drug in films and indicated that ibuprofen sodium did not react with polymers. DSC studies confirmed the crystalline form of ibuprofen sodium when incorporated within films. In vitro dissolution studies found that the dissolution percentage of ibuprofen sodium alone was increased when incorporated within the film from 59 to 74%. This study led to the development of solid microcrystalline dispersion as a buccal film with a faster dissolution rate than the drug alone overcoming problem of poor solubility.

Biotin-Containing Reduced Graphene Oxide-Based Nanosystem as a Multieffect Anticancer Agent: Combining Hyperthermia with Targeted Chemotherapy.

Among the relevant properties of graphene derivatives, their ability of acting as an energy-converting device so as to produce heat (i.e., thermoablation and hyperthermia) was more recently taken into account for the treatment of solid tumors. In this pioneering study, for the first time, the in vitro RGO-induced hyperthermia was assessed and combined with the stimuli-sensitive anticancer effect of a biotinylated inulin-doxorubicin conjugate (CJ-PEGBT), hence, getting to a nanosystem endowed with synergic anticancer effects and high specificity. CJ-PEGBT was synthesized by linking pentynoic acid and citraconic acid to inulin. The citraconylamide pendants, used as pH reversible spacer, were exploited to further conjugate doxorubicin, whereas the alkyne moiety was orthogonally functionalized with an azido PEG-biotin derivative by copper(II) catalyzed 1,3-dipolar cycloaddition. DSC measures, AFM, and UV spectrophotometry were employed to systematically investigate adsorption of CJ-PEGBT onto RGO and its physicochemical stability in aqueous media, demonstrating that a stable π-staked nanosystem can be obtained. In vitro tests using cancer breast cells (MCF-7) showed the ability of the RGO/CJ-PEGBT of efficiently killing cancer cells both via a selective laser beam thermoablation and hyperthermia-triggered chemotherapy. If compared with the nonbiotinylated nanosystem, including virgin RGO and the free conjugate, RGO/CJ-PEGBT is endowed with a smart combination of properties which warrant potential as an anticancer nanomedicine.

Inulin-Ethylenediamine Coated SPIONs Magnetoplexes: A Promising Tool for Improving siRNA Delivery.

PURPOSE: An inulin based polycation (Inu-EDA) has been synthesized by the grafting of ethylenediamine molecules onto inulin backbone. The obtained inulin copolymer has been though to coat SPIONs (IC-SPIONs) and obtain stable magnetoplexes by complexation of IC-SPIONs with a model duplexed siRNA, for improving oligonucleotide transfection efficiency. METHODS: The physical-chemical characteristics of IC-SPIONs and IC-SPIONs/siRNA magnetoplexes have been investigated by scanning and transmission electron microscopies, dynamic light scattering, FT-IR and qualitative surface elementary analysis. Cell compatibility and internalization in vitro of IC-SPIONs have been evaluated by MTS and fluorescence microscopy respectively on cancer (HCT116) and normal human (16HBE) cells. The efficiency of gene silencing effect of magnetoplexes was studied on both tumoral (JHH6) and non tumoral (16HBE) cell lines also by applying an external magnet. RESULTS: IC-SPIONs showed dimension of 30 nm and resulted cytocompatible on the tested cell lines; in the presence of an external magnet, the magnetic force enhanced the IC-SPIONs uptake inside cells. Magnetically improved transfection was observed in 16HBE cells under magnetofective conditions, in accordance with the IC-SPIONs uptake enhancement in the presence of an external magnet. CONCLUSIONS: These findings support the potential application of this system as a magnetically targeted drug delivery system. Graphical Abstract Magnetically improved siRNA transfection in cells under magnetofective conditions upon uptake enhancement of IC-SPIONs in the presence of an external magnet.

Polyaspartamide-doxorubicin conjugate as potential prodrug for anticancer therapy.

PURPOSE: To synthesize a new polymeric prodrug based on α,ß-poly(N-2-hydroxyethyl)(2-aminoethylcarbamate)-d,l-aspartamide copolymer bearing amine groups in the side chain (PHEA-EDA), covalently linked to the anticancer drug doxorubicin and to test its potential application in anticancer therapy. METHODS: The drug was previously derivatized with a biocompatible and hydrophilic linker, leading to a doxorubicin derivative highly reactive with amino groups of PHEA-EDA. The PHEA-EDA-DOXO prodrug was characterized in terms of chemical stability. The pharmacokinetics, biodistribution and cytotoxicity of the product was investigated in vitro and in vivo on human breast cancer MCF-7 and T47D cell lines and NOD-SCID mice bearing a MCF-7 human breast carcinoma xenograft. Data collected were compared to those obtained using free doxorubicin. RESULTS: The final polymeric product is water soluble and easily hydrolysable in vivo, due to the presence of ester and amide bonds along the spacer between the drug and the polymeric backbone. In vitro tests showed a retarded cytotoxic effect on tumor cells, whereas a significant improvement of the in vivo antitumor activity of PHEA-EDA-DOXO and a survival advantage of the treated NOD-SCID mice was evidenced, compared to that of free doxorubicin. CONCLUSIONS: The features of the PHEA-EDA-DOXO provide a potential protection of the drug from the plasmatic enzymatic degradation and clearance, an improvement of the blood pharmacokinetic parameters and a suitable body biodistribution. The data collected support the promising rationale of the proposed macromolecular prodrug PHEA-EDA-DOXO for further potential development and application in the treatment of solid cancer diseases.

Cross-Linked Hyaluronan Derivatives in the Delivery of Phycocyanin.

An easy and viable crosslinking technology, based on the "click-chemistry" reaction copper(I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition (click-crosslinking), was applied to graft copolymers of medium molecular weight (i.e., 270 kDa) hyaluronic acid (HA) grafted with ferulic acid (FA) residues bearing clickable propargyl groups, as well as caffeic acid derivatives bearing azido-terminated oligo(ethylene glycol) side chains. The obtained crosslinked materials were characterized from the point of view of their structure and aggregation liability to form hydrogels in a water environment. The most promising materials showed interesting loading capability regarding the antioxidant agent phycocyanin (PC). Two novel materials complexes (namely HA(270)-FA-TEGEC-CL-20/PC and HA(270)-FA-HEGEC-CL-20/PC) were obtained with a drug-to-material ratio of 1:2 (w/w). Zeta potential measurements of the new complexes (-1.23 mV for HA(270)-FA-TEGEC-CL-20/PC and -1.73 mV for HA(270)-FA-HEGEC-CL-20/PC) showed alterations compared to the zeta potential values of the materials on their own, suggesting the achievement of drug-material interactions. According to the in vitro dissolution studies carried out in different conditions, novel drug delivery systems (DDSs) were obtained with a variety of characteristics depending on the desired route of administration and, consequently, on the pH of the surrounding environment, thanks to the complexation of phycocyanin with these two new crosslinked materials. Both complexes showed excellent potential for providing a controlled/prolonged release of the active pharmaceutical ingredient (API). They also increased the amount of drug that reach the target location, enabling pH-dependent release. Importantly, as demonstrated by the DPPH free radical scavenging assay, the complexation process, involving freezing and freeze-drying, showed no adverse effects on the antioxidant activity of phycocyanin. This activity was preserved in the two novel materials and followed a concentration-dependent pattern similar to pure PC.

Combining spontaneous polymerization and click reactions for the synthesis of polymer brushes: a "grafting onto" approach.

Two novel benzofulvene monomers bearing propargyl or allyl groups have been synthesized by means of readily accessible reactions, and were found to polymerize spontaneously by solvent removal, in the apparent absence of catalysts or initiators, to give the corresponding polybenzofulvene derivatives bearing clickable propargyl or allyl moieties. The clickable propargyl and allyl groups were exploited in appropriate click reactions to develop a powerful and versatile "grafting onto" synthetic methodology for obtaining tailored polymer brushes.

Nanoaggregates based on new poly-hydroxyethyl-aspartamide copolymers for oral insulin absorption.

The aim of this work was to produce copolymers with an appropriate hydrophilic/hydrophobic balance able to form nanoaggregates with protein molecules and to be used as ideal materials in the field of oral peptide/protein delivery. New anionic polymers obtained by the conjugation of carboxy-bearing ligands, like succinic anhydride and/or cysteine, to hydrophobized α,ß-poly(N-2-hydroxyethyl)-dl-aspartamide (PHEA) copolymers have been synthesized and characterized. Starting copolymer was synthesized by the partial derivatization of hydroxyl groups on the PHEA backbone with butylamine (C4) (obtaining the PHEA-C4 copolymer, bearing a butyl moiety). The consecutive reaction of PHEA-C4 with succinic anhydride permitted the PHEA-C4-S copolymer to be obtained, bearing pendant carboxylic groups as well. Finally, part of the pendant carboxylic groups were conjugated to cysteine via an amidic bond, obtaining PHEA-C4-S-Cyst. All synthesized copolymers, PHEA-C4, PHEA-C4-S, and PHEA-C4-S-Cyst, exhibit the ability to interact with insulin in aqueous medium forming nanoaggregates. Physical characterization of prepared insulin/copolymer nanoaggregates was carried out by means of turbidimetric measurements and DLS analysis. These studies demonstrated that synthesized copolymers form colloidal aggregates in the presence of insulin, with size ranging between 62 and 216 nm. Stability studies in the presence of the peptidase α-chymotrypsin showed also the ability of synthesized copolymers to increase insulin stability against enzymatic degradation in the order PHEA-C4-S-Cyst > PHEA-C4-S > PHEA-C4. Moreover, in dosage form such as tablets, the synthesized copolymers displayed the properties to prolong disintegration time and control release of the embedded peptide drug into media mimicking intestinal fluids. The administration of insulin in the presence of PHEA-C4-S-Cyst and PHEA-C4-S copolymers resulted in the ability to provoke a certain absorption of insulin and consequently to induce in vivo hypoglycemic effects on rats after oral administration with respect to free insulin. In particular, the hypoglycemic effect shown by PHEA-C4-S/insulin nanoaggregates was equal to almost 30% of the effect observed after the administration of insulin by conventional subcutaneous administration and about 20% in the case of PHEA-C4-S-Cyst/insulin nanoaggregates. These copolymers are good starting materials for the preparation of an oral dosage form of proteins.

Polymeric nanocarriers for magnetic targeted drug delivery: preparation, characterization, and in vitro and in vivo evaluation.

In this paper the preparation of magnetic nanocarriers (MNCs), containing superparamagnetic domains, is reported, useful as potential magnetically targeted drug delivery systems. The preparation of MNCs was performed by using the PHEA-IB-p(BMA) graft copolymer as coating material through the homogenization-solvent evaporation method. Magnetic and nonmagnetic nanocarriers containing flutamide (FLU-MNCs) were prepared. The prepared nanocarriers have been exhaustively characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and magnetic measurements. Biological evaluation was performed by in vitro cytotoxicity and cell uptake tests and in vivo biodistribution studies. Magnetic nanocarriers showed dimensions of about 300 nm with a narrow size distribution, an amount of loaded FLU of 20% (w/w), and a superparamagnetic behavior. Cell culture experiments performed on prostate cancer cell line LNCaP demonstrated the cytotoxic effect of FLU-MNCs. In vivo biodistribution studies carried out by the application of an external magnetic field in rats demonstrated the effect of the external magnet on modifying the biodistribution of FLU-MNCs. FLU-MNCs resulted efficiently internalized by tumor cells and susceptible to magnetic targeting by application of an external magnetic field. The proposed nanocarriers can represent a very promising approach to obtain an efficient magnetically targeted anticancer drug delivery system.

Amphiphilic copolymers based on poly[(hydroxyethyl)-D,L-aspartamide]: a suitable functional coating for biocompatible gold nanostars.

Novel amphiphilic copolymers have been synthesized based on a biocompatible poly(hydroxyethylaspartamide) (PHEA) backbone, bearing both anchoring groups for gold nanoparticles, such as thiols and disulfide, and conjugable moieties, such as amino groups, the latter as points suitable for appending further functional agents. The strategy was to functionalize α,ß-poly[(N-2-hydroxyethyl)-D,L-aspartamide] (PHEA) with PEG2000-NH2 and with ethylenediamine (EDA) obtaining a partially pegylated copolymer with a large number of pendant primary amino groups. A fraction of the latter was conjugated with molecules bearing terminal thiol moieties such as 12-mercaptododecanoic acid (MDA) and disulfide groups such as lipoic acid (LA), obtaining the two amphiphilic derivatives PHEA-PEG2000-EDA-MDA (PPE-MDA) and PHEA-PEG2000-EDA-LA (PPE-LA), which also proved intrinsically able to self-assemble in polymeric micelles. The two copolymers efficiently coated gold nanostars (GNSs, size ≈ 40 nm), wrapping around the surface increasing only slightly the hydrodynamic diameter (reaching ≈ 45 nm), imparting them stability and a pH-switchable surface charge, due to the unreacted amino groups. Remarkably, the poor solvation and the huge steric hindrance experienced by the amino groups lowers the observed logarithmic protonation constants to 5.6-5.7. In vitro experiments demonstrated that PPE-MDA and PPE-LA copolymers have an intrinsic excellent biocompatibility in both the human brain neuroblastoma (SH-SY5Y) and human bronchial epithelial (16-HBE) cell lines. Interaction of the same cell lines with "nude" GNS and GNS coated with PPE-LA was also studied, disclosing a completely satisfactory biocompatibility of the latter.

Peripheral Nerve Regeneration at 1 Year: Biodegradable Polybutylene Succinate Artificial Scaffold vs. Conventional Epineurial Sutures.

The utilization of a planar poly(1,4-butylene succinate) (PBS) scaffold has been demonstrated as an effective approach for preserving nerve continuity and facilitating nerve regeneration. In this study, we assessed the characteristics of a microfibrous tubular scaffold specifically designed and fabricated through electrospinning, utilizing PBS as a biocompatible and biodegradable material. These scaffolds were evaluated as nerve guide conduits in a rat model of sciatic nerve neurotmesis, demonstrating both their biodegradability and efficacy in enhancing the reconstruction process over a long-term period (1-year follow-up). Histological assay and electrophysiological evaluation were performed to compare the long-term outcomes following sutureless repair with the microfibrillar wrap to outcomes obtained using traditional suture repair.

Engineered Ferritin with Eu3+ as a Bright Nanovector: A Photoluminescence Study.

Ferritin nanoparticles play many important roles in theranostic and bioengineering applications and have been successfully used as nanovectors for the targeted delivery of drugs due to their ability to specifically bind the transferrin receptor (TfR1, or CD71). They can be either genetically or chemically modified for encapsulating therapeutics or probes in their inner cavity. Here, we analyzed a new engineered ferritin nanoparticle, made of the H chain mouse ferritin (HFt) fused with a specific lanthanide binding tag (LBT). The HFt-LBT has one high affinity lanthanide binding site per each of the 24 subunits and a tryptophane residue within the tag that acts as an antenna able to transfer the energy to the lanthanide ions via a LRET process. In this study, among lanthanides, we selected europium for its red emission that allows to reduce overlap with tissue auto-fluorescence. Steady state emission measurements and time-resolved emission spectroscopy have been employed to investigate the interaction between the HFt-LBT and the Eu3+ ions. This allowed us to identify the Eu3+ energy states involved in the process and to pave the way for the future use of HFt-LBT Eu3+ complex in theranostics.

Gastro-Resistant Microparticles Produced by Spray-Drying as Controlled Release Systems for Liposoluble Vitamins.

In the present study, gastro-resistant microparticles (MPs) were produced using the spray-drying technique as controlled-release systems for some model liposoluble vitamins, including retinyl-palmitate, retinyl-acetate, ß-carotene, cholecalciferol and α-tocopherol. The gastroprotective action of three different gastro-resistant excipients, the anionic methacrylic copolymer (Eudraguard®® Biotic, E1207), the cellulose acetate phthalate (CAP) and whey proteins (WPs), was compared. The latter was used to produce a novel delivery system manufactured with only food-derived components, such as milk, and showed several improvements over the two synthetic gastro-resistant agents. Scanning electron microscopy (SEM) images showed a quite homogeneous spherical shape of all microparticle batches, with an average diameter between 7 and 15 µm. FTIR analysis was used to evaluate the effective incorporation of vitamins within the microparticles and the absence of any degradation to the components of the formulation. The comparison graphs of differential scanning calorimetry (DSC) confirmed that the spray drying technique generates a solid in which the physical interactions between the excipients and the vitamins are very strong. Release studies showed a prominent pH-controlled release and partially a delayed-release profile. Ex vivo permeation studies of retinyl palmitate, retinyl acetate and α-tocopherol revealed greater transmucosal permeation capacity for microparticles produced with the WPs and milk.

In vivo efficacy of verteporfin loaded gold nanorods for combined photothermal/photodynamic colon cancer therapy.

The high incidence of cancer recurrences and the frequent occurrence of multidrug resistance often stem from a poorly selective and inefficient antineoplastic therapy, responsible for the onset of undesired side effects as well. A combination of minimal-invasive approaches could thus be a useful strategy to surmount these shortcomings, achieving a safe and solid cancer therapy. Herein, a multi-therapeutic nanotool was designed by merging the photothermal properties of gold nanorods (AuNRs) with the photodynamic activity of the photosensitizer verteporfin. AuNRs were coated with the natural materials lipoic acid and gellan gum (AuNRs_LA,GG) and subsequently loaded with verteporfin (AuNRs_LA,GG/Vert) producing stable colloidal dispersions. AuNRs_LA,GG/Vert were characterized in terms of stability, size and morphology. The hyperthermia exhibited after NIR excitation (810 nm) was also evaluated to highlight the effect on increasing the drug released profile in intra-tumoral mimicking media, as well as cytotoxicity on human colon cancer cell line (HCT116). In vivo studies on HCT116 murine xenograft models were carried out to prove the ability of AuNRs_LA,GG to arrest the tumor growth via NIR laser-triggered hyperthermia. Furthermore, the complete xenograft depletion was demonstrated upon AuNRs_LA,GG/Vert administration by combined photothermal (PTT) and photodynamic (PDT) effects.

Polybutylene Succinate Processing and Evaluation as a Micro Fibrous Graft for Tissue Engineering Applications.

A microfibrous tubular scaffold has been designed and fabricated by electrospinning using poly (1,4-butylene succinate) as biocompatible and biodegradable material. The scaffold morphology was optimized as a small diameter and micro-porous conduit, able to foster cell integration, adhesion, and growth while avoiding cell infiltration through the graft's wall. Scaffold morphology and mechanical properties were explored and compared to those of native conduits. Scaffolds were then seeded with adult normal human dermal fibroblasts to evaluate cytocompatibility in vitro. Haemolytic effect was evaluated upon incubation with diluted whole blood. The scaffold showed no delamination, and mechanical properties were in the physiological range for tubular conduits: elastic modulus (17.5 ± 1.6 MPa), ultimate tensile stress (3.95 ± 0.17 MPa), strain to failure (57 ± 4.5%) and suture retention force (2.65 ± 0.32 N). The shown degradation profile allows the graft to provide initial mechanical support and functionality while being colonized and then replaced by the host cells. This combination of features might represent a step toward future research on PBS as a biomaterial to produce scaffolds that provide structure and function over time and support host cell remodelling.

Polybutylene succinate artificial scaffold for peripheral nerve regeneration.

Regeneration and recovery of nerve tissues are a great challenge for medicine, and positively affect the quality of life of patients. The development of tissue engineering offers a new approach to the problem with the creation of multifunctional artificial scaffolds that act on various levels in the damaged tissue, providing physical and biochemical support for the growth of nerve cells. In this study, the effects of the use of a tubular scaffold made of polybutylene succinate (PBS), surgically positioned at the level of a sciatic nerve injured in rat, between the proximal stump and the distal one, was investigated. Scaffolds characterization was carried out by scanning electron microscopy and X-ray microcomputed tomography and magnetic resonance imaging, in vivo. The demonstration of the nerve regeneration was based on the evaluation of electroneurography, measuring the weight of gastrocnemius and tibialis anterior muscles, histological examination of regenerated nerves and observing the recovery of the locomotor activity of animals. The PBS tubular scaffold minimized iatrogenic trauma on the nerve, acting as a directional guide for the regenerating fibers by conveying them toward the distal stump. In this context, neurotrophic and neurotropic factors may accumulate and perform their functions, while invasion by macrophages and scar tissue is hampered.