RESUMO
Two-dimensional (2D) Dion-Jacobson (DJ) perovskite solar cells (PSCs), despite their advantage in versatility of n-layer variation, are subject to poor photovoltaic efficiency, particularly in the fill factor (FF), compared to their three-dimensional counterparts. To enhance the performance of DJ PSCs, the process of growing crystals and hence the corresponding morphology of DJ perovskites are of prime importance. Herein, we report the fast nonisothermal (NIT) crystallization protocol that is previously unrecognized for 2D perovskites to significantly improve the morphology, orientation, and charge transport of the DJ perovskite films. Comprehensive mechanistic studies reveal that the NIT effect leads to the secondary crystallization stage, forming network-like channels that play a vital role in the FF's leap-forward improvement and hence the DJ PSC's performance. As a whole, the NIT crystallized PSCs demonstrate a high power conversion efficiency and an FF of up to 19.87 and 86.16%, respectively. This research thus provides new perspectives to achieve highly efficient DJ PSCs.
Assuntos
Compostos de Cálcio , Óxidos , Cristalização , TitânioRESUMO
Through the incorporation of various halogen-substituted chiral organic cations, the effects of chiral molecules on the chiroptical properties of hybrid organic-inorganic perovskites (HOIPs) are investigated. Among them, the HOIP having a Cl-substituted chiral cation exhibits the highest circular dichroism (CD) and circular polarized luminescence (CPL) intensities, indicating the existence of the largest rotatory strength, whereas the F-substituted HIOP shows the weakest intensities. The observed modulation can be correlated to the varied magnetic transition dipole of HOIPs, which is sensitive to the d-spacing between inorganic layers and the halogen-halogen interaction between organic cations and the inorganic sheets. These counteracting effects meet the optimal CD and CPL intensity with chlorine substitution, rendering the rotatory strength of HOIPs arranged in the order of (ClMBA)2 PbI4 >(BrMBA)2 PbI4 >(IMBA)2 PbI4 >(MBA)2 PbI4 >(FMBA)2 PbI4 .
RESUMO
2D perovskites with chemical formula A'2 An-1 Bn X3n+1 have recently attracted considerable attention due to their tunable optical and electronic properties, which can be attained by varying the chemical composition. While high color-purity emitting perovskite nanomaterials have been accomplished through changing the halide composition, the preparation of single-phase, specific n-layer 2D perovskite nanomaterials is still pending because of the fast nucleation process of nanoparticles. We demonstrate a facile, rational and efficacious approach to synthesizing single-phase 2D perovskite nanoplates with a designated n number for both lead- and tin-based perovskites through kinetic control. Casting carboxylic acid additives in the reaction medium promotes selective formation of the kinetic product-multilayer 2D perovskite-in preference to the single-layer thermodynamic product. For the n-specific layered 2D perovskites, decreasing the number of octahedral layers per inorganic sheet leads to an increase of photoluminescence energy, radiative decay rate, and a significant boost in photostability.
RESUMO
Tin-based perovskite, which exhibits narrower bandgap and comparable photophysical properties to its lead analogs, is one of the most forward-looking lead-free semiconductor materials. However, the poor oxidative stability of tin perovskite hinders the development toward practical application. In this work, the effect of pseudohalide anions on the stability and emission properties of single-layer 2D tin perovskite nanoplates with chemical formula TEA2 SnI4 (TEA = 2-thiophene-ethylammonium) is reported. The results reveal that ammonium thiocyanate (NH4 SCN) is the most effective additive in enhancing the stability and photoluminescence quantum yield of 2D TEA2 SnI4 (23 ± 3%). X-Ray photoelectron spectroscopic investigations on the thiocyanate passivated TEA2 SnI4 nanoplate show less than a 1% increase of Sn4+ signal upon 30 min exposure to air under ambient conditions (298 K, humidity ≈70%). Furthermore, no noticeable decrease in emission intensity of the nanoplate is observed after 20 h in air. The SCN- passivation during the growth stage of TEA2 SnI4 is proposed to play a crucial role in preventing the oxidation of Sn2+ and hence boosts both stability and photoluminescence yield of tin perovskite nanoplates.
RESUMO
Tin perovskite nanomaterial is one of the promising candidates to replace organic lead halide perovskites in lighting applications. Unfortunately, the performance of tin-based systems is markedly inferior to those featuring toxic Pb salts. In an effort to improve the emission quantum efficiency of nanoscale 2D layered tin iodide perovskites through fine-tuning the electronic property of organic ammonium salts, we came to unveil the relationship between dielectric confinement and the photoluminescent properties of tin iodide perovskite nanodisks. Our results show that increasing the dielectric contrast for organic versus inorganic layers leads to a bathochromic shift in emission peak wavelength, a decrease of exciton recombination time, and importantly a significant boost in the emission efficiency. Under optimized conditions, a leap in emission quantum yield to a record high 21% was accomplished for the nanoscale thienylethylammonium tin iodide perovskite (TEA2SnI4). The as-prepared TEA2SnI4 also possessed superior photostability, showing no sign of degradation under continuous irradiation (10 mW/cm2) over a period of 120 h.
RESUMO
Inverted perovskite solar cells (PSCs) have attracted intense attention because of their insignificant hysteresis and low-temperature fabrication process. However, the efficiencies of inverted PSCs are still inferior to those of commercialized silicon solar cells. Also, the poor stability of PSCs is one of the major impedances to commercialization. Herein, we rationally designed and synthesized a new series of electron donor (R,R-diphenylamino) and acceptor (pyridimium-(CH2) n -sulfonates) zwitterions as a boundary modulator and systematically investigated their associated interface properties. Comprehensive physical and optoelectronic studies verify that these zwitterions provide a four-in-one functionality: balancing charge carrier transport, suppressing less-coordinated Pb2+ defects, enhancing moisture resistance, and reducing ion migration. Although each functionality may have been reported by specific passivating molecules, a strategy that simultaneously regulates the charge-transfer balance and three other functionalities has not yet been developed. The results are to make an omnidirectional improvement of PSCs. Among all zwitterions, 4-(4-(4-(di-(4-methoxylphenyl)amino)phenyl)propane-1-ium-1-yl)butane-1-sulfonate (OMeZC3) optimizes the balance hole/electron mobility ratio of perovskite to 0.91, and the corresponding PSCs demonstrate a high power conversion efficiency (PCE) of up to 23.15% free from hysteresis, standing out as one of the champion PSCs with an inverted structure. Importantly, the OMeZC3-modified PSC exhibits excellent long-term stability, maintaining almost its initial PCE after being stored at 80% relative humidity for 35 days.
RESUMO
Colloidal perovskite quantum dots represent one of the most promising materials for applications in solar cells and photoluminescences. These devices require a low density of crystal defects and a high yield of photogenerated carriers, which are difficult to realize in tin-halide perovskite because of the intrinsic instability of tin during nucleation. Here, an enhancement in the luminescent property of tin-halide perovskite nanoplates (TPNPs) that are composed of strongly coupled layered structures with the chemical formula of PEA2 SnX4 (PEA = C6 H5 (CH2 )2 NH3 , X = Br, I) is reported. TPNPs (X = I) show an emission at a wavelength of 640 nm, with high quantum yield of 6.40 ± 0.14% and full width at half maximum (FWHM) as small as 36 nm. The presence of aliphatic carboxylic acid is found to play a key role in reducing the tin perovskite defect density, which significantly improves the emission intensity and stability of TPNPs. Upon mixing iodo- and bromo- precursors, the emission wavelength is successfully tuned from 640 nm (PEA2 SnI4 ) to 550 nm (PEA2 SnBr4 ), with a corresponding emission quantum yield and FWHM of 0.16-6.40% and 36-80 nm, respectively. The results demonstrate a major advance for the emission yield and tunability of tin-halide perovskites.
RESUMO
BACKGROUND: Bone metastasis is the most lethal form of several cancers. The ß2-microglobulin (ß2-M)/hemochromatosis (HFE) complex plays an important role in cancer development and bone metastasis. We demonstrated previously that overexpression of ß2-M in prostate, breast, lung and renal cancer leads to increased bone metastasis in mouse models. Therefore, we hypothesized that ß2-M is a rational target to treat prostate cancer bone metastasis. RESULTS: In this study, we demonstrate the role of ß2-M and its binding partner, HFE, in modulating radiation sensitivity and chemo-sensitivity of prostate cancer. By genetic deletion of ß2-M or HFE or using an anti-ß2-M antibody (Ab), we demonstrate that prostate cancer cells are sensitive to radiation in vitro and in vivo. Inhibition of ß2-M or HFE sensitized prostate cancer cells to radiation by increasing iron and reactive oxygen species and decreasing DNA repair and stress response proteins. Using xenograft mouse model, we demonstrate that anti-ß2-M Ab sensitizes prostate cancer cells to radiation treatment. Additionally, anti-ß2-M Ab was able to prevent tumor growth in an immunocompetent spontaneous prostate cancer mouse model. Since bone metastasis is lethal, we used a bone xenograft model to test the ability of anti-ß2-M Ab and radiation to block tumor growth in the bone. Combination treatment significantly prevented tumor growth in the bone xenograft model by inhibiting ß2-M and inducing iron overload. In addition to radiation sensitive effects, inhibition of ß2-M sensitized prostate cancer cells to chemotherapeutic agents. CONCLUSION: Since prostate cancer bone metastatic patients have high ß2-M in the tumor tissue and in the secreted form, targeting ß2-M with anti-ß2-M Ab is a promising therapeutic agent. Additionally, inhibition of ß2-M sensitizes cancer cells to clinically used therapies such as radiation by inducing iron overload and decreasing DNA repair enzymes.