Newly diagnosed type 1 diabetes mellitus in a human immunodeficiency virus-infected patient with antiretroviral therapy-induced immune reconstitution inflammatory syndrome: a case report.

BACKGROUND: Diabetes that develops in human immunodeficiency virus (HIV)-infected patients who receive antiretroviral therapy (ART) is usually type 2 diabetes mellitus (T2DM); however, autoimmune diabetes, such as type 1 diabetes mellitus (T1DM) can also develop in this population. After treatment with ART, patients might experience clinical deterioration following an increase in the CD4 cell count, which is termed immune reconstitution inflammatory syndrome (IRIS). Here, we describe an HIV-infected patient on ART who developed T1DMat due to IRIS, highlighting the clinical complexity in diagnosis and treatment. CASE PRESENTATION: A 36-year-old man infected with HIV had a nadir CD4 cell count of 15.53/µL before medication, which increased to 429.09/µL after 9 months of regular ART. The fasting serum glucose at 9 months was between 96 mg/dL and 117 mg/dL. After 11 months of ART, the patient was admitted to hospital for diabetic ketoacidosis (DKA) and Graves' disease (GD). Noninsulin antidiabetics (NIADs) were prescribed following the resolution of DKA. However, poor glycemic control was noted despite well-titrated NIADs. Further investigation demonstrated poor pancreatic beta cell function and elevated anti-glutamic acid decarboxylase (anti-GAD) and anti-tyrosine phosphatase-like insulinoma antigen 2 (anti-IA2) titers. According to the results, he was diagnosed with T1DM and received multiple daily injections(MDI) of insulin. The regimen of MDI was insulin degludec as basal insulin and insulin aspart as prandial insulin. After MDI therapy, his glycemic control was improved. CONCLUSION: In this case, T1DM was ascribed to IRIS. Although this phenomenon has been demonstrated in previous case reports, further study is necessary to realize the mechanism of this association. Therefore, we emphasize that when HIV-infected patients on ART experience an unstable blood glucose level and abnormal thyroid function, physicians should consider T1DM and GD associated with ART-induced IRIS to reduce the subsequent complications and more serious endocrine dysfunction.

Unusual body weight loss due to primary hyperparathyroidism: A case study with literature review.

Brown tumors (osteitis fibrosa cystica) are rare pathognomonic signs that occur in patients with primary hyperparathyroidism (PHPT). Brown tumors can exist in multiple bones and can easily be misdiagnosed as a metastatic tumor or multiple myeloma. It is also localized in the forearm, humerus, and leg. The symptoms of hypercalcemia, pathologic fracture, and bodyweight loss may increase the diagnostic difficulty of brown tumors because multiple myeloma and bone metastasis also show the same symptoms. We studied a 68-year-old woman who had experienced unusual bodyweight loss in the past 6 months (56kg-40kg) and bone pain. She went to the hospital after a fall with a complaint of bone pain. An X-ray revealed a left bubbly-like cystic change and multiple fractures at the left ulna midshaft. Upon investigation, the level of intact parathyroid hormone was ascertained to be 1800 (normal: 10-60) pg/ml. Microscopically, the tumor demonstrated a benign bone lesion and was compatible with osteitis fibrosa cystica due to PHPT. The parathyroid scan (Tc-99 m sestamibi) indicated right parathyroid hyperplasia, which was later confirmed by a parathyroidectomy. She was diagnosed with osteitis fibrosa cystica associated with PHPT due to a parathyroid adenoma. PHPT can be presented with multiple fractures, bone pain, and bodyweight loss. Therefore, if a patient presents these symptoms, PHPT should be considered.

Analysis of carbamazepine and its five metabolites in serum by large-volume sample stacking-sweeping capillary electrophoresis.

This study establishes a method, using different buffer conductivities and large-volume sample stacking (LVSS)-sweeping capillary electrophoresis, for analysis of carbamazepine (CBZ) and its five metabolites in serum. The capillary (50/60 cm) was filled with a high concentration of background electrolyte (150 mM phosphate, pH 3.5, containing 15 % methanol), followed by a large volume of samples (10 psi, 20 s) with low-concentration buffers (5 mM phosphate, pH 3.5, with 5 % methanol). When high voltage was applied (-20 kV), the sodium dodecyl sulfate (SDS) started to sweep the analytes to an outlet. Meanwhile, the analytes decelerated at the boundary between low- and high-conductivity buffers. Finally, a narrow sample zone was formed. The procedure of sweeping and separation was simultaneously carried out by a sweeping buffer (150 mM phosphate, pH 3.5) with 15% methanol and 50 mM SDS added, and the detection was performed by UV at 214 nm. The method was validated for linearity (r >/= 0.997), precision, and accuracy. The calibration curves were established for CBZ and its five metabolites between 0.03-25 and 0.03-3 µg/mL. The limits of detection (S/N = 3) were 0.01 µg/mL for each analyte. Compared with simple MEKC (0.5 psi, 5 s), this system can improve the sensitivity about 300-fold. Finally, this method was successfully applied to five patients, who had taken 200 mg CBZ daily, and CBZ levels were found to be from 3.72 to 5.82 µg/mL.

Mycobacterium tuberculosis DNA detection using surface plasmon resonance modulated by telecommunication wavelength.

A surface plasmon resonance sensor for Mycobacterium tuberculosis (MTB) deoxyribonucleic acid (DNA) is developed using repeatable telecommunication wavelength modulation based on optical fiber communications laser wavelength and stability. MTB DNA concentrations of 1 µg/mL and 10 µg/mL were successfully demonstrated to have the same spectral half-width in the dip for optimum coupling. The sensitivity was shown to be -0.087 dB/(µg/mL) at all applied telecommunication wavelengths and the highest sensitivity achieved was 115 ng/mL without thiolated DNA immobilization onto a gold plate, which is better than the sensor limit of 400 ng/mL possible with commercial biosensor equipment.

Iodine nutritional status is not a direct factor in the prevalence of the BRAFV600E mutation in papillary thyroid cancer.

Objective: Papillary thyroid carcinoma (PTC) accounts for approximately 85%-90% of all thyroid cancers. Of the iodine-metabolizing genes, BRAFV600E is a highly specific target for PTC and may have a reciprocal causative relationship with iodide-metabolizing genes. Materials and methods: In this study, we performed a data analysis of selected quantitative studies to determine the relationship between iodine nutritional status and the prevalence of the BRAF600E mutation in patients with PTC. Five studies were selected for meta-analysis based on the selection criteria. Results: A total of 2,068 patients were divided into three groups: low (urinary iodine concentration [UIC] < 100 µg/L), adequate (UIC 100-200 µg/L), and high (UIC ≥ 200 µg/L). The results were obtained using RevMan software, and the pooled odds ratios (ORs) were calculated using Mantel-Haenszel statistics with a 95% confidence interval (CI). The OR for the prevalence of the BRAFV600E mutation between the high and adequate groups was 1.25 (95% CI 0.64-2.43, p = 0.51), and the OR between the low and adequate groups was 0.98 (95% CI 0.42-2.31, p = 0.96). The BRAFV600E mutation risk did not change significantly at different levels of iodine nutrition (p = 0.33) in statistical analyses. Conclusion: We conducted preliminary research on dietary iodine intake and the BRAFV600E mutation in PTC. The results suggested that abnormal iodine intake might not directly influence the prevalence of the BRAFV600E mutation in these patients. Further research into the associations between dietary iodine intake and the BRAFV600E mutation in PTC, including the underlying mechanisms, is required.

Elevated Free Thyroxine Levels Might Alter the Effect of the Lipid Profile on Insulin Resistance in Type 2 Diabetes Mellitus.

Previous studies have shown that hyperthyroidism is associated with heightened insulin resistance and dyslipidemia. Therefore, in this study, we aim to explore the relationship between elevated thyroid hormone levels and the lipid profile in insulin resistance in patients with type 2 diabetes mellitus (T2DM) with hyperthyroidism. A total of 177 participants were included and grouped according to diagnosis. The serum test results demonstrated that free thyroxine (FT4) increased the insulin resistance index (HOMA-IR) by positively correlating with triglyceride (TG) levels (p = 0.005, r2 = 0.35). In patients with T2DM with hyperthyroidism, the decreasing high-density lipoprotein levels showed an association with HOMA-IR (p = 0.005). Among all the patients, with different levels of FT4, the areas under the ROC curve (AUCs) of the TG level, TG/high-density lipoprotein ratio, and HOMA-IR were 0.620 (95% CI: 0.536 to 0.698), 0.614 (95% CI: 0.530 to 0.692), and 0.722 (95% CI: 0.645 to 0.791), respectively. Our results suggest that elevated FT4 levels due to hyperthyroidism could alter the association with the lipid profile and insulin resistance in patients with T2DM. We also suggest that among all the included patients with T2DM, irrespective of the presence of hyperthyroidism, FT4 levels are positively correlated with insulin resistance.

Thermoplastic Laminated Composites Applied to Impact Resistant Protective Gear: Structural Design and Development.

Laminated composites have been commonly applied to all fields. When made into laminated composites, Kevlar woven fabrics are able to provide the required functions. In this study, two types of TPU are incorporated to improve the intralayer features of Kevlar/TPU laminated composites. Hence, the Kevlar/TPU laminated composites consist of firmly bonded laminates while retaining flexibility of the fabrics. Being the interlayer of the laminated composites, the TPU layer provides adhesion while strengthening the tensile property, dynamic puncture resistance, and buffer strength of Kevlar/TPU laminated composites. The test results indicate that with a blending ratio of two types of TRU being 85/15 wt%, the Kevlar/TPU laminated composites exhibit a tensile strength of 18.08 MPa. When the stacking thickness is 1 mm, the tensile strength is improved to 357.73 N with the buffering strength reaching 4224.40 N. Notably, with a thickness being 1.2 mm, the laminated composites demonstrate a dynamic resistance being 672.15 N. In the meanwhile, functional Kevlar fabrics are allowed to keep the fiber morphology owing to the protection of TPU composite films. Considering the composition of protective gear, Kevlar/TPU laminated composites possess a powerful potential and are worthwhile exploring.

Combing High-Modulus Fibers with a Novel Foaming Structure Applied to Protective Sandwich-Structured Composites: Manufacturing Techniques and Property Evaluations.

This study proposes the composites with a sandwich structure that is primarily made by the multi-step foaming process. The staple material is polyurethane (PU) foam that is combined with carbon fibers, followed by a Kevlar woven fabric. The composites are evaluated in terms of puncture resistance, buffer absorption, and electromagnetic wave shielding effectiveness (EMSE). The manufacturing process provides the composites with a stabilized structure efficiently. Serving the interlayer, a Kevlar woven fabric are sealed between a top and a bottom layer consisting of both PU foam and an aluminum film in order, thereby forming five-layered composites. Namely, the upper and lower surfaces of the five-layered sandwiches are aluminum films which is laminated on a purpose for the EMSE reinforcement. The test results indicate that the PU foam composites are well bonded and thus acquire multiple functions from the constituent materials, including buffer absorption, puncture resistance, and EMSE. There is much prospect that the PU foam composites can be used as a protective material in diverse fields owing to a flexible range of functions.

Long-Lasting Electret Melt-Blown Nonwoven Functional Filters Made of Organic/Inorganixc Macromolecular Micron Materials: Manufacturing Techniques and Property Evaluations.

Melt-blown nonwoven fabrics for filtration are usually manufactured using polypropylene, but after a certain time period the middle layer of the mask may have a reduced effect on adsorbing particles and may not be easily stored. Adding electret materials not only increases storage time, but also shows in this study that the addition of electret can improve filtration efficiency. Therefore, this experiment uses a melt-blown method to prepare a nonwoven layer, and adds MMT, CNT, and TiO2 electret materials to it for experiments. Polypropylene (PP) chip, montmorillonite (MMT) and titanium dioxide (TiO2) powders, and carbon nanotube (CNT) are blended and made into compound masterbatch pellets using a single-screw extruder. The resulting compound pellets thus contain different combinations of PP, MMT, TiO2, and CNT. Next, a hot pressor is used to make the compound chips into a high-poly film, which is then measured with differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The optimal parameters are yielded and employed to form the PP/MMT/TiO2 nonwoven fabrics and PP/MMT/CNT nonwoven fabrics. The basis weight, thickness, diameter, pore size, fiber covering ratio, air permeability, and tensile property of different nonwoven fabrics are evaluated in order to have the optimal group of PP-based melt-blown nonwoven fabrics. According to the results of DSC and FTIR measurements, PP and MMT, CNT, and TiO2 are completely mixed, and the melting temperature (Tm), crystallization temperature (Tc) and endotherm area are changed accordingly. The difference in enthalpy of melting changes the crystallization of PP pellets, which in turn changes the fibers. Moreover, the Fourier transform infrared (FTIR) spectroscopy results substantiate that PP pellets are well blended with CNT and MMT, according to the comparisons of characteristic peaks. Finally, the scanning electron microscopy (SEM) observation suggests that with a spinning die temperature of 240 °C and a spinning die pressure lower than 0.01 MPa, the compound pellets can be successfully formed into melt-blown nonwoven fabrics with a 10-micrometer diameter. The proposed melt-blown nonwoven fabrics can be processed with electret to form long-lasting electret melt-blown nonwoven filters.