RESUMO
BACKGROUND: Alexander disease (AxD) is a rare neurodegenerative disorder that is caused by dominant mutations in the gene encoding glial fibrillary acidic protein (GFAP), an intermediate filament that is primarily expressed by astrocytes. In AxD, mutant GFAP in combination with increased GFAP expression result in astrocyte dysfunction and the accumulation of Rosenthal fibers. A neuroinflammatory environment consisting primarily of macrophage lineage cells has been observed in AxD patients and mouse models. METHODS: To examine if macrophage lineage cells could serve as a therapeutic target in AxD, GFAP knock-in mutant AxD model mice were treated with a colony-stimulating factor 1 receptor (CSF1R) inhibitor, pexidartinib. The effects of pexidartinib treatment on disease phenotypes were assessed. RESULTS: In AxD model mice, pexidartinib administration depleted macrophages in the CNS and caused elevation of GFAP transcript and protein levels with minimal impacts on other phenotypes including body weight, stress response activation, chemokine/cytokine expression, and T cell infiltration. CONCLUSIONS: Together, these results highlight the complicated role that macrophages can play in neurological diseases and do not support the use of pexidartinib as a therapy for AxD.
Assuntos
Doença de Alexander , Aminopiridinas/farmacologia , Proteína Glial Fibrilar Ácida/efeitos dos fármacos , Macrófagos/efeitos dos fármacos , Pirróis/farmacologia , Doença de Alexander/metabolismo , Doença de Alexander/patologia , Animais , Modelos Animais de Doenças , Proteína Glial Fibrilar Ácida/metabolismo , Camundongos , Camundongos Endogâmicos C57BL , FenótipoRESUMO
The recombinant congenic mouse strains HcB-8 and HcB-23 differ in femoral shape, size, and strength, with HcB-8 femora being more gracile, more cylindrical, weaker, and having higher Young's modulus. In previous work, we mapped a robust, pleiotropic quantitative trait locus for these bone traits. Ece1, encoding endothelin converting enzyme 1, is a positional candidate gene for this locus, and was less expressed in HcB-8 bone. We hypothesized that the same genetic factors would impose analogous developmental trajectories on arteries to those in bones. Cardiovascular hemodynamics and biomechanics of carotids were measured in adult HcB-8 and HcB-23 mice. Biological differences in heart and arteries were examined at mRNA and protein levels. As in bone, Ece1 expression was higher in HcB-23 heart and arteries (p < 0.05), and its expression was correlated with that of the endothelin B type receptor target Nos3, encoding endothelial nitric oxide synthase. HcB-8 mice had higher ambulatory blood pressure (p < 0.005) than HcB-23 mice. Ex vivo, at identical pressures, HcB-8 carotid arteries had smaller diameters and lower compliance (p < 0.05), but the same elastic modulus compared to HcB-23 carotid arteries. HcB-8 hearts were heavier than HcB-23 hearts (p < 0.01). HcB-8 has both small, stiff bones and small, stiff arteries, lower expression of Ece1 and Nos3, associated in each case with less favorable function. These findings suggest that endothelin signaling could serve as a nexus for the convergence of skeletal and vascular modeling, providing a potential mechanism for the epidemiologic association between skeletal fragility and atherosclerosis.
Assuntos
Artérias/anatomia & histologia , Artérias/fisiologia , Ácido Aspártico Endopeptidases/metabolismo , Pressão Sanguínea , Osso e Ossos/anatomia & histologia , Osso e Ossos/fisiologia , Regulação da Expressão Gênica , Metaloendopeptidases/metabolismo , Animais , Ácido Aspártico Endopeptidases/genética , Fenômenos Biomecânicos , Complacência (Medida de Distensibilidade) , Enzimas Conversoras de Endotelina , Endotelinas/metabolismo , Masculino , Metaloendopeptidases/genética , Camundongos , Óxido Nítrico/metabolismo , Tamanho do Órgão , RNA Mensageiro/genética , RNA Mensageiro/metabolismo , Especificidade da EspécieRESUMO
Bone biomechanical performance is a complex trait or, more properly, an ensemble of complex traits. Biomechanical performance incorporates flexibility under loading, yield and failure load, and energy to failure; all are important measures of bone function. To date, the vast majority of work has focused on yield and failure load and its surrogate, bone mineral density. We performed a reciprocal intercross of the mouse strains HcB-8 and HcB-23 to map and ultimately identify genes that contribute to differences in biomechanical performance. Mechanical testing was performed by 3-point bending of the femora. We measured femoral diaphysis cross-sectional anatomy from photographs of the fracture surfaces. We used beam equations to calculate material level mechanical properties. We performed a principal component (PC) analysis of normalized whole bone phenotypes (17 input traits). We measured distances separating mandibular landmarks from calibrated digital photographs and performed linkage analysis. Experiment-wide α = 0.05 significance thresholds were established by permutation testing. Three quantitative trait loci (QTLs) identified in these studies illustrate the advantages of the comprehensive phenotyping approach. A pleiotropic QTL on chromosome 4 affected multiple whole bone phenotypes with LOD scores as large as 17.5, encompassing size, cross-sectional ellipticity, stiffness, yield and failure load, and bone mineral density. This locus was linked to 3 of the PCs but unlinked to any of the tissue level phenotypes. From this pattern, we infer that the QTL operates by modulating the proliferative response to mechanical loading. On this basis, we successfully predicted that this locus also affects the length of a specific region of the mandible. A pleiotropic locus on chromosome 10 with LOD scores displays opposite effects on failure load and toughness with LOD scores of 4.5 and 5.5, respectively, so that the allele that increases failure load decreases toughness. A chromosome 19 QTL for PC2 with an LOD score of 4.8 was not detected with either the whole bone or tissue level phenotypes. We conclude that first, comprehensive, system-oriented phenotyping provides much information that could not be obtained by focusing on bone mineral density alone. Second, mechanical performance includes inherent trade-offs between strength and brittleness. Third, considering the aggregate phenotypic data allows prediction of novel QTLs.
Assuntos
Osso e Ossos/anatomia & histologia , Osso e Ossos/metabolismo , Mapeamento Cromossômico , Cruzamentos Genéticos , Recombinação Genética/genética , Animais , Fenômenos Biomecânicos/genética , Cromossomos de Mamíferos/genética , Feminino , Masculino , Mandíbula/anatomia & histologia , Camundongos , Camundongos Congênicos , FenótipoRESUMO
Despite steady progress in identifying quantitative trait loci (QTLs) for bone phenotypes, relatively little progress has been made in moving from QTLs to identifying the relevant gene. We exploited the genetic structure of recombinant congenic mouse strains by performing a reciprocal intercross of the strains HcB-8 and HcB-23, phenotyped for body size, femoral biomechanical performance, and femoral diaphyseal geometry and mapped with R/qtl and QTL Cartographer. Significant QTLs are present on chromosomes 1, 2, 3, 4, 6, and 10. We found significant sex x QTL and cross-direction x QTL interactions. The chromosome 4 QTL affects multiple femoral anatomic features and biomechanical properties. The known segregating segment of chromosome 4 contains only 18 genes, among which Ece1, encoding endothelin-converting enzyme 1, stands out as a candidate. Endothelin signaling has been shown to promote the growth of osteoblastic metastases and to potentiate signaling via the Wnt pathway. The colocalizing chromosome 4 QTL Bmd7 (for bone mineral density 7) increases responsiveness to mechanical loading. By exploiting the short informative segment of chromosome 4 and the known biology, we propose that Ece1 is the gene responsible for Bmd7 and that it acts by increasing responsiveness to mechanical loading through modulation of Wnt signaling.
Assuntos
Ácido Aspártico Endopeptidases/genética , Fêmur/fisiologia , Metaloendopeptidases/genética , Locos de Características Quantitativas , Animais , Ácido Aspártico Endopeptidases/fisiologia , Fenômenos Biomecânicos/genética , Densidade Óssea/genética , Cromossomos de Mamíferos , Cruzamentos Genéticos , Enzimas Conversoras de Endotelina , Feminino , Fêmur/anatomia & histologia , Masculino , Metaloendopeptidases/fisiologia , Camundongos , Camundongos Congênicos , Fenótipo , Cromossomos Sexuais , Proteínas Wnt/metabolismoRESUMO
A pleiotropic quantitative trait locus (QTL) for bone geometry and mechanical performance in mice was mapped to distal chromosome 4 via an intercross of recombinant congenic mice HcB-8 and HcB-23. To study the QTL in isolation, we have generated C3H.B10-(rs6355453-rs13478087) (C.B.4.3) and C3H.B10-(rs6369860-D4Mit170) (C.B.4.2) congenic strains that harbor ~20 Mb and ~3 Mb, respectively, of chromosome 4 overlapping segments from C57BL/10ScSnA (B10) within the locus on a C3H/DiSnA (C3H) background. Using 3-point bend testing and standard beam equations, we phenotyped these mice for femoral mid-diaphyseal geometry and biomechanical performance. We analyzed the results via 2-way ANOVA, using sex and genotype as factors. In the C.B.4.3 strain, we found that homozygous B10/B10 male mice had smaller cross sectional area (CSA) and reduced total displacement than homozygous C3H/C3H mice. Sex by genotype interaction was also observed for maximum load and stiffness for C3H/C3H and B10/B10 mice, respectively. In C.B.4.2 strain, we found that homozygous B10/B10 mice had lower total displacement, post-yield displacement (PYD), stiffness, yield load and maximum load than mice harboring C3H allele. Sex by genotype interaction was observed in B10/B10 mice for perimeter, outer minor axis (OMA) and CSA. There were no significant differences in tissue level mechanical performance, which suggest that the QTL acts primarily on circumferential bone size. These data confirm the prior QTL mapping data and support other work demonstrating the importance of chromosome 4 QTL on bone modeling and bone responses to mechanical loading.
Assuntos
Cromossomos de Mamíferos , Fêmur/anatomia & histologia , Fêmur/fisiologia , Locos de Características Quantitativas , Animais , Fenômenos Biomecânicos , Densidade Óssea/genética , Feminino , Masculino , Camundongos Congênicos , Camundongos Endogâmicos C3H , Camundongos Endogâmicos C57BLRESUMO
Many densitometric studies in mice assess bone mineral density (BMD) at specified regions of interest, often using ex vivo specimens. In the present study, we sought to determine the precision and accuracy of ex vivo densitometry of mouse bones, comparing two software versions and two data acquisition techniques. The newer software allows manual adjustment of the threshold value for bone, improving the ability to analyze bone edges correctly. Root mean square standard deviations were 2-3 mg/cm2, with coefficients of variation ranging between 3% and 5% for femora and humeri and between 6% and 7% for radii. The regression coefficients for bone mineral content as a function of ash mass were near 1 for femora and humeri, but considerably lower for radii. Coefficients of determination were inversely related to bone size, with R2 values exceeding 0.9 at the femur, 0.8 at the humerus, and ranging between 0.3 and 0.6 at the radius. We found that our instrument has a position artifact, with BMD and bone mineral content dependent on the specimen's coordinates in the scanned field. Our findings establish the limitations of ex vivo densitometry with the PIXImus and support our recommendation that investigators seek position artifacts in their instruments.
Assuntos
Absorciometria de Fóton/métodos , Densidade Óssea , Software , Animais , Artefatos , Técnicas In Vitro , Camundongos , Camundongos Endogâmicos C57BL , Reprodutibilidade dos TestesRESUMO
PURPOSE: Phenylketonuria (PKU), caused by phenylalanine (phe) hydroxylase loss of function mutations, requires a low-phe diet plus amino acid (AA) formula to prevent cognitive impairment. Glycomacropeptide (GMP), a low-phe whey protein, provides a palatable alternative to AA formula. Skeletal fragility is a poorly understood chronic complication of PKU. We sought to characterize the impact of the PKU genotype and dietary protein source on bone biomechanics. PROCEDURES: Wild type (WT; Pah(+/+)) and PKU (Pah(enu2/enu2)) mice on a C57BL/6J background were fed high-phe casein, low-phe AA, and low-phe GMP diets between 3 to 23 weeks of age. Following euthanasia, femur biomechanics were assessed by 3-point bending and femoral diaphyseal structure was determined. Femoral ex vivo bone mineral density (BMD) was assessed by dual-energy x-ray absorptiometry. Whole bone parameters were used in principal component analysis. Data were analyzed by 3-way ANCOVA with genotype, sex, and diet as the main factors. FINDINGS: Regardless of diet and sex, PKU femora were more brittle, as manifested by lower post-yield displacement, weaker, as manifested by lower energy and yield and maximal loads, and showed reduced BMD compared with WT femora. Four principal components accounted for 87% of the variance and all differed significantly by genotype. Regardless of genotype and sex, the AA diet reduced femoral cross-sectional area and consequent maximal load compared with the GMP diet. CONCLUSIONS: Skeletal fragility, as reflected in brittle and weak femora, is an inherent feature of PKU. This PKU bone phenotype is attenuated by a GMP diet compared with an AA diet.
Assuntos
Caseínas/uso terapêutico , Dieta com Restrição de Proteínas , Fêmur/efeitos dos fármacos , Fragmentos de Peptídeos/uso terapêutico , Fenilalanina Hidroxilase/genética , Fenilalanina/metabolismo , Fenilcetonúrias/dietoterapia , Fenilcetonúrias/metabolismo , Absorciometria de Fóton , Animais , Fenômenos Biomecânicos , Densidade Óssea/efeitos dos fármacos , Caseínas/farmacologia , Módulo de Elasticidade/efeitos dos fármacos , Feminino , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Transgênicos , Fragmentos de Peptídeos/farmacologia , Fenótipo , Fenilalanina Hidroxilase/deficiência , Fenilcetonúrias/diagnóstico por imagem , Fenilcetonúrias/genéticaRESUMO
Studies of bone genetics have addressed an array of related phenotypes, including various measures of biomechanical performance, bone size, bone, shape, and bone mineral density. These phenotypes are not independent, resulting in redundancy of the information they provide. Principal component (PC) analysis transforms multiple phenotype data to a new set of orthogonal "synthetic" phenotypes. We performed PC analysis on 17 femoral biomechanical, anatomic, and body size phenotypes in a reciprocal intercross of HcB-8 and HcB-23, accounting for 80% of the variance in 4 PCs. Three of the 4 PCs were mapped in the cross. The linkage analysis revealed a quantitative trait locus (QTL) with LOD = 4.7 for PC2 at 16 cM on chromosome 19 that was not detected using the directly measured phenotypes. The chromosome 19 QTL falls within a ~10 megabase interval, with Osf1 as a positional candidate gene. PC QTLs were also found on chromosomes 1, 2, 4, 6, and 10 that coincided with those identified for directly measured or calculated material property phenotypes. The novel chromosome 19 QTL illustrates the power advantage that attends use of PC phenotypes for linkage mapping. Constraint of the chromosome 19 candidate interval illustrates an important advantage of experimental crosses between recombinant congenic mouse strains.
Assuntos
Mapeamento Cromossômico , Cruzamentos Genéticos , Fêmur/fisiologia , Ligação Genética , Análise de Componente Principal , Animais , Fenômenos Biomecânicos/fisiologia , Feminino , Masculino , Camundongos , Fenótipo , Locos de Características Quantitativas/genéticaRESUMO
Dual energy X ray absorptiometry (DXA) has become a popular analytical technique in mice and other small animals. Comparative study of bone properties at different anatomical sites is an active area of study in model organisms. Such investigations require that site-specific data be generated and interpreted. There are no published data addressing the degree to which contralateral mouse bones resemble each other in the absence of an experimental intervention, nor are there data addressing the correlation of bone densitometry measurements between anatomically distant sites. To address these gaps in our knowledge, we used DXA to compare excised mouse femora and humeri. At the population level, left bones were slightly but significantly denser than right bones, with an overall adjusted bone mineral density (BMD) difference of 0.7 +/- 0.3 and 0.5 +/- 0.2 mg/cm2 at the femur and humerus, respectively. At the level of bone pairs from a single animal, absolute adjusted BMD disparities between the right and left sides were 2.3 +/- 1.9 mg/cm2 at the femur and 1.7 +/- 1.4 mg/cm2 at the humerus. Correlation coefficients between left and right sides were 0.78 for adjusted BMD at both sites. The correlation coefficient between side-averaged femoral and humeral BMD was 0.81, but ranged between 0.70 and 0.75 when limited to ipsilateral or contralateral femur-humerus pairs. Our findings suggest the desirability of randomizing limbs for treatment in studies using contralateral limb controls. These observations may represent the densitometric manifestation of behavioral and neuroanatomical lateralization in laboratory mice.