An evolutionary continuum from nucleated dwarf galaxies to star clusters.

Systematic studies1-4 have revealed hundreds of ultra-compact dwarf galaxies (UCDs5) in the nearby Universe. With half-light radii rh of approximately 10-100 parsecs and stellar masses M* ≈ 106-108 solar masses, UCDs are among the densest known stellar systems6. Although similar in appearance to massive globular clusters7, the detection of extended stellar envelopes4,8,9, complex star formation histories10, elevated mass-to-light ratio11,12 and supermassive black holes13-16 suggest that some UCDs are remnant nuclear star clusters17 of tidally stripped dwarf galaxies18,19, or even ancient compact galaxies20. However, only a few objects have been found in the transient stage of tidal stripping21,22, and this assumed evolutionary path19 has never been fully traced by observations. Here we show that 106 galaxies in the Virgo cluster have morphologies that are intermediate between normal, nucleated dwarf galaxies and single-component UCDs, revealing a continuum that fully maps this morphological transition and fills the 'size gap' between star clusters and galaxies. Their spatial distribution and redder colour are also consistent with stripped satellite galaxies on their first few pericentric passages around massive galaxies23. The 'ultra-diffuse' tidal features around several of these galaxies directly show how UCDs are forming through tidal stripping and that this evolutionary path can include an early phase as a nucleated ultra-diffuse galaxy24,25. These UCDs represent substantial visible fossil remnants of ancient dwarf galaxies in galaxy clusters, and more low-mass remnants probably remain to be found.

Achieving Superior High-Temperature Strength and Oxidation Resistance of TiAl Nanocomposite through In Situ Semicoherent MAX Phase Precipitation.

Increasing the service temperature of TiAl intermetallics is the main challenge for the development of next-generation aircraft. Dispersion-strengthening, an effective means to further improve the high-temperature performance of metals, fails to implement in TiAl intermetallics due to difficulties in interface optimization. Here, we successively fabricate a TiAl naocomposite with fully lamellar microstructures and homogeneously dispersed Ti2AlC nanoprecipitates via spark plasma sintering. The composite consisted of semicoherent interfaces among γ-TiAl/Ti2AlC precipitates/α2-Ti3Al, in addition to continuous polysynthetic nanotwins. Strong pinning effects as well as strain-induced nanoscale TiCr2 precipitation uplift the operation temperature of TiAl nanocomposites by more than 50 °C. Furthermore, we experimentally proved that semicoherent interfaces among in situ Ti2AlC precipitates and its surrounding matrix serve as oxygen diffusion barrier during isothermal oxidization and significantly drop down the mass gain of TiAl nanocomposites during operation, making the present nanocomposite a highly potential candidate for use as light-weight structural materials in automotive and aerospace industries.

Peroxymonosulfate activation through ferromagnetic bimetallic spinel sulfide composite (Fe3O4/NiCo2S4) for organic pollutant degradation.

Spinel sulfides are a good candidate as heterogeneous catalysts for wastewater treatment through peroxymonosulfate (PMS) activation. In this paper, magnetic Fe3O4/NiCo2S4 composite was successfully synthesized by hydrothermal method. Catalyst screening displayed that the composite catalyst with a Fe3O4:NiCo2S4 molar ratio of 1:3 (i.e.,0.33-Fe3O4/NiCo2S4) is the most optimal. The results showed that 0.33-Fe3O4/NiCo2S4 composite catalyst had superior catalytic activity, achieving 99.8%,65.1% and 40.7% of RhB, COD and TOC removals within 30 min with 180 m g/L PMS and 75 mg/L catalyst. We proposed a potential catalytic mechanism of PMS activation by Fe3O4/NiCo2S4 in two aspects. On the one hand, sulfur species such as S2- and S22- enhance the Co3+/Co2+, Ni3+/Ni2+ and Fe3+/Fe2+ cycles on Fe3O4/NiCo2S4 surface. On the other hand, there is the synergistic effect of Co3+/Co2+, Ni3+/Ni2+ and Fe3+/Fe2+ cycles in activating PMS. Overall, owing to its excellent catalytic activity, reusability, and easy recovery, Fe3O4/NiCo2S4 is a potentially useful catalyst for remediation of contaminated water.

Vascular characteristics and expression of hypoxia genes in Tibetan pigs' hearts.

BACKGROUND: Tibetan pigs have exhibited unique characteristics from low-altitudes pigs and adapted well to the Qinghai-Tibet Plateau. OBJECTIVES: The current study was undertaken to investigate the hypoxic adaptation of heart in Tibetan pigs. METHODS: The hearts of Tibetan pigs and Landrace pigs raised at high or low altitudes were compared using 3D casting technology, scanning electron microscopy and real-time quantitative PCR (qRT-PCR). RESULTS: We found that the ratio of the major axis to the minor axis and the density of the heart were significantly higher in Tibetan pigs than in Landrace pigs (p < 0.05). Tibetan pigs had larger diameters and higher densities of arterioles than Landrace pigs (p < 0.05), and these features have a similar variation with the expression of vascular endothelial growth factor (VEGF). The cardiac expression levels of hypoxia-inducible factor-1α (HIF-1α) and endothelial nitric oxide synthase (eNOS) were significantly higher in pigs reared at high altitudes than in those reared at low altitudes (p < 0.05). In contrast, Egl nine homolog 1 (EGLN1) had the opposite trend with respect to HIF-1α and eNOS and was related to red blood cell (RBC) counts. Notably, the expressions of erythropoietin (EPO) and endothelial PAS domain-containing protein 1 (EPAS1) were significantly higher in Landrace pigs kept at high altitudes than in the others (p < 0.05) and were associated with haemoglobin. CONCLUSIONS: These findings show that the regulation of the heart function of Tibetan pigs in a hypoxic environment is manifested at various levels to ensure the circulation of blood under extreme environmental conditions.

Morphological and scanning electron microscopic study of the gonadal arterioles in the Tibetan sheep.

This research aimed at revealing the structural features of Tibetan sheep's testicular and ovarian vasculature and providing theoretical basis for Tibetan sheep's physiological adaptability in plateau and low-oxygen environments. Through scanning electron microscopy, corrosion casts of the feature of the gonad arterioles were observed and analysed. The results of this study found that centrifugal arteries, centrifugal and centripetal arterioles were distributed in a 'dendritic' fashion in the testis lobule, the ovarian arteries and arterioles, which had a spiral shape. Testicular Tibetan Sheep knot-like artery had a denser spiral structure, and there were more branches in the microarteries. On the testis lobule and arteriole of caput epididymidis, the arteriole surface shows the 'fusiform' indentation to be more shallower. The ovarian artery had a higher degree of helix; its surface was distributed like a 'bark-like' indentation; and the ring was narrower and denser. Nevertheless, the arteriole network had a high concentration and a wide number of branches, as that of the ovarian arteriole network which had more end branches, the surface of the arterioles of ovaries and testicles was scarred and denser. The studies indicate that the structural features of testicular lobule, epididymal arterioles and ovarian arterioles are more conducive to increase the oxygen supply to the gonads tissue and controlling blood flow velocity and metabolism to respond to high altitudes and low-oxygen environments.

Characteristics of Tibetan pig lung tissue in response to a hypoxic environment on the Qinghai-Tibet Plateau.

To adapt to the plateau environment, Tibetan pigs' lungs have developed a unique physiological mechanism during evolution. The vascular corrosion casting technique and scanning electron microscopy were used to understand arterial architecture. Blood physiological index and quantitative real-time PCR (qRT-PCR) were used for assessing whether the lung can regulate the body through anatomical, physiological and molecular mechanisms to adapt to hypoxic environments. Our study showed that the lungs of Tibetan pigs were heavier and wider and that the pulmonary arteries were thicker and branched and had a denser vascular network than those of Landrace pigs. The hemoglobin (HGB), mean corpuscular hemoglobin concentration (MCHC) values of high-altitude pigs were significantly higher than those of low-altitude pigs. The expression levels of HIF- 1 α , EPAS1, EPO and VEGF, but not those of eNOSand EGLN1, were significantly higher in the lungs of high-altitude pigs than in those from pigs at a lower altitude ( P < 0.05 ). These findings and a comprehensive analysis help elucidate the pulmonary mechanism of hypoxic adaptation in pigs.

Stacking faults in Zr(Fe, Cr)2 Laves structured secondary phase particle in Zircaloy-4 alloy.

Stacking faults (SFs) in secondary phase particles (SPPs), which generally crystallize in the Laves phase in Zircaloy-4 (Zr-4) alloy, have been frequently observed by researchers. However, few investigations on the nano-scale structure of SFs have been carried out. In the present study, an SF containing C14 structured SPP, which located at grain boundaries (GBs) in the α-Zr matrix, was chosen to be investigated, for its particular substructure as well as location, aiming to reveal the nature of the SFs in the SPPs in Zr-4 alloy. It was indicated that the SFs in the C14 structured SPP actually existed in the local C36 structured Laves phase, for their similarities in crystallography. The C14 → C36 phase transformation, which was driven by synchroshearing among the (0001) basal planes, was the formation mechanism of the SFs in the SPPs. By analyzing the strained regions near the SPP, a model for understanding the driving force of the synchroshear was proposed: the interaction between SPP and GB resulted in the Zener pinning effect, leading to the shearing parallel to the (0001) basal planes of the C14 structured SPP, and the synchroshear was therefore activated.

Considerable knock-on displacement of metal atoms under a low energy electron beam.

Under electron beam irradiation, knock-on atomic displacement is commonly thought to occur only when the incident electron energy is above the incident-energy threshold of the material in question. However, we report that when exposed to intense electrons at room temperature at a low incident energy of 30 keV, which is far below the theoretically predicted incident-energy threshold of zirconium, Zircaloy-4 (Zr-1.50Sn-0.25Fe-0.15Cr (wt.%)) surfaces can undergo considerable displacement damage. We demonstrate that electron beam irradiation of the bulk Zircaloy-4 surface resulted in a striking radiation effect that nanoscale precipitates within the surface layer gradually emerged and became clearly visible with increasing the irradiation time. Our transmission electron microscope (TEM) observations further reveal that electron beam irradiation of the thin-film Zircaly-4 surface caused the sputtering of surface α-Zr atoms, the nanoscale atomic restructuring in the α-Zr matrix, and the amorphization of precipitates. These results are the first direct evidences suggesting that displacement of metal atoms can be induced by a low incident electron energy below threshold. The presented way to irradiate may be extended to other materials aiming at producing appealing properties for applications in fields of nanotechnology, surface technology, and others.