Room-Temperature High-Performance Photodetector and Phototransistor Based on PdSe2/ZnIn2S4 Alloy Heterojunctions.

Various semiconductor devices have been developed based on 2D heterojunction materials owing to their distinctive optoelectronic properties. However, to achieve efficient charge transfer at their interface remains a major challenge. Herein, an alloy heterojunction concept is proposed. The sulfur vacancies in ZnIn2S4 are filled with selenium atoms of PdSe2. This chemically bonded heterojunction can significantly enhance the separation of photocarriers, providing notable advantages in the field of photoelectric conversion. As a demonstration, a two-terminal photodetector based on the PdSe2/ZnIn2S4 heterojunction materials is fabricated. The photodetector exhibits stable operation in ambient conditions, showcasing superior performance in terms of large photocurrent, high responsivity (48.8 mA W-1) and detectivity (1.98 × 1011 Jones). To further validate the excellent optoelectronic performance of the heterojunction, a tri-terminal phototransistor is also fabricated. Benefiting from gate voltage modulation, the photocurrent is amplified to milliampere level, and the responsivity is increased to 229.14 mA W-1. These findings collectively demonstrate the significant potential of the chemically bonded PdSe2/ZnIn2S4 alloy heterojunction for future optoelectronic applications.

Co-multiplexing spectral and temporal dimensions based on luminescent materials.

Optical multiplexing is a pivotal technique for augmenting the capacity of optical data storage (ODS) and increasing the security of anti-counterfeiting. However, due to the dearth of appropriate storage media, optical multiplexing is generally restricted to a single dimension, thus curtailing the encoding capacity. Herein, the co-multiplexing spectral and temporal dimensions are proposed for optical encoding based on photoluminescence (PL) and persistent-luminescence (PersL) at four different wavelengths. Each emission color comprises four luminescence modes. The further multiplexing of four wavelengths leads to the maximum encoding capacity of 8 bits at each pixel. The wavelength difference between adjacent peaks is larger than 50 nm. The well-separated emission wavelengths significantly lower the requirements for high-resolution spectrometers. Moreover, the information is unable to be decoded until both PL and PersL spectra are collected, suggesting a substantial improvement in information security and the security level of anti-counterfeiting.

A droplet friction/solar-thermal hybrid power generation device for energy harvesting in both rainy and sunny weathers.

Photovoltaic device is highly dependent on the weather, which is completely ineffective on rainy days. Therefore, it is very significant to design an all-weather power generation system that can utilize a variety of natural energy. This work develops a water droplet friction power generation (WDFG)/solar-thermal power generation (STG) hybrid system. The WDFG consists of two metal electrodes and a candle soot/polymer composite film, which also can be regarded as a capacitor. Thus, the capacitor coupled power generation (C-WDFG) device can achieve a sustainable and stable direct-current (DC) output under continuous dripping without external conversion circuits. A single device can produce an open-circuit voltage of ca.0.52 V and a short-circuit current of ca.0.06 mA, which can be further scaled up through series or parallel connection to drive commercial electronics. Moreover, we demonstrate that the C-WDFG is highly compatible with the thermoelectric device. The excellent photothermal performance of soot/polymer composite film can efficiently convert solar into heat, which is then converted to electricity by the thermoelectric device. Therefore, this C-WDFG/STG hybrid system can work in both rainy and sunny days.

Snapshot multi-frame parallel spectral holographic microscopy based on a reconfigurable optical comb.

We present a snapshot multi-frame parallel holographic microscopy system through a reconfigurable optical comb source, which consists of a digital micromirror device (DMD) based spectrum filter system and a spectroscopic Michelson interferometric system. The proposed system allows arbitrarily tuning comb spacing and comb number, and the capturing of multi-frame images without overlap in one exposure. As a result, high-quality spectral holograms can be obtained with less acquisition time. The performance of the system is detailed in the experiment and 45-wavelengths holographic imaging for perovskite micro-platelets is conducted, which proves the system has the ability to realize high-performance four-dimensional (4D) imaging.

Structural characterizations on the degradation of 2D organic-inorganic hybrid perovskites and its enlightenment to improved stability.

Despite the demonstrated high-efficiency of solar cells and light-emitting devices based on two-dimensional (2D) perovskites, intrinsic stability of the 2D perovskites is yet far from satisfactory. In this work, we find the 2D (BA)2PbI4perovskite crystals rapidly degrade in the ambient conditions and the photoluminescence (PL) nearly completely quenches in 6 d. Moreover, the PL shoulder band due to defects and absorption band of PbI2gradually rise during degradation, suggesting the precipitation of PbI2. Besides, rod structures are observed in the degraded crystals, which are attributed to the formation of one-dimensional (1D) (BA)3PbI5perovskites. And the degradation can be largely retarded by decreasing the humidity during storage. Therefore, a chemical reaction for the degradation of (BA)2PbI4is proposed, revealing the interactions between water molecules and undercoordinated defects are very critical for understanding the degradation. Enlightened by these findings, dimethyl itaconate (DI) treatment is developed to passivate the defects and block the intrusion of moisture to improve the stability of the (BA)2PbI4. After storage in the ambient environment for 16 d, the DI treated (BA)2PbI4only shows a slight surface degradation without formation of any nanorod-like structures, and the PL intensity retains about 70%. Therefore, our systematic study provides a comprehensive understanding on the degradation dynamics of 2D perovskites, which will promote future development of intrinsically stable 2D perovskites.

Fluorescent dynamics of CsPbBr3 nanocrystals in polar solvents: a potential sensor for polarity.

During synthesis, device processes, and applications of perovskite nanocrystals (NCs), there are usually inevitable interactions between perovskite NCs and polar solvents. To elaborately control the properties of perovskite NCs, investigating the effects of solvent polarity on perovskite NCs is thus highly important. Herein, fluorescent variations induced by different solvents into CsPbBr3 NCs solution are systematically studied. In this report, it is found that when CsPbBr3 NCs are treated with polar solvents, the fluorescence intensity decreases with a general redshift of fluorescence peak position. Moreover, the fluorescence quenching and peak position shift amplitude monotonously increase with the solvent polarity. Absorption spectra and fluorescent lifetime suggest that, with addition of polar solvents, the surface of NCs are destroyed and defect states are generated, leading to the fluorescent variations. Besides, dielectric constant of the solvent also increases with polarity, which may weaken the quantum confinement effect and decrease the exciton binding energy. We find the fluorescence may slightly blue shift if the emission of free carrier is strong enough with certain solvents, such as dimethylsulfoxide (DMSO). We also find the fluorescence intensity generally deceases to a stable state in 2 min, indicating quick interactions between CsPbBr3 NCs and solvents. However, water continuously quenches the fluorescence of CsPbBr3 NCs up to 72 h due to the poor miscibility between water and n-hexane. This work not only provides a comprehensive understanding on the fluorescent dynamics of CsPbBr3 NCs in polar solvents but also affords a potential fluorescent indicator for solvent polarity.

Cuttlefish Ink Tagged Photonic Crystal Particles and Their Ion-Responsive Construction.

Colloidal crystal materials have potential values in coding, sensing, displaying and so on. Attempts to promote these values tend to focus on the development of functional colloidal crystal materials with high color saturations and bright structural colors for practical applications. Thus, this work presented novel cuttlefish ink nanoparticles doped colloidal crystal particle material, which had distinguishable and high saturation colors, and could response to the electric field and pH obviously. It was also found that the doping could result in a short-range order and long-range disorder structure of the colloidal crystals, which endowed them with wide viewing angles. More importantly, by using electric field and ions dual-responsive hydrogel to replicate the composite colloidal crystals particles, the resultant cuttlefish ink nanoparticles doped inverse opal particles were imparted with the same high saturation vivid structural colors, as well as obviously structural color tunability. These features make the cuttlefish ink nanoparticles doped colloidal crystal particles ideal for many practical applications where structural color materials is needed.

Functionalized Periodic Mesoporous Silica Nanoparticles for Inhibiting the Progression of Atherosclerosis by Targeting Low-Density Lipoprotein Cholesterol.

Atherosclerotic disease is a substantial global burden, and existing treatments, such as statins, are recommended to lower low-density lipoprotein cholesterol (LDL-C) levels and inhibit the progression of atherosclerosis. However, side effects, including gastrointestinal unease, potential harm to the liver, and discomfort in the muscles, might be observed. In this study, we propose a novel method using periodic mesoporous silica nanoparticles (PMS) to create heparin-modified PMS (PMS-HP) with excellent biocompatibility, enabling selective removal of LDL-C from the blood. In vitro, through the introduction of PMS-HP into the plasma of mice, we observed that, compared to PMS alone, PMS-HP could selectively adsorb LDL-C while avoiding interference with valuable components such as plasma proteins and high-density lipoprotein cholesterol (HDL-C). Notably, further investigations revealed that the adsorption of LDL-C by PMS-HP could be well-fitted to quasi-first-order (R2 = 0.993) and quasi-second-order adsorption models (R2 = 0.998). Likewise, in vivo, intravenous injection of PMS-HP enabled targeted LDL-C adsorption (6.5 ± 0.73 vs. 8.6 ± 0.76 mM, p < 0.001) without affecting other plasma constituents, contributing to reducing intravascular plaque formation (3.66% ± 1.06% vs. 1.87% ± 0.79%, p < 0.05) on the aortic wall and inhibiting vascular remodeling (27.2% ± 6.55% vs. 38.3% ± 1.99%, p < 0.05). Compared to existing lipid adsorption techniques, PMS-HP exhibited superior biocompatibility and recyclability, rendering it valuable for both in vivo and in vitro applications.

Advanced Optical Information Encryption Enabled by Polychromatic and Stimuli-Responsive Luminescence of Sb-Doped Double Perovskites.

The smart materials with multi-color and stimuli-responsive luminescence are very promising for next generation of optical information encryption and anti-counterfeiting, but these materials are still scarce. Herein, a multi-level information encryption strategy is developed based on the polychromatic emission of Sb-doped double perovskite powders (SDPPs). Cs2NaInCl6:Sb, Cs2KInCl6:Sb, and Cs2AgInCl6:Sb synthesized through coprecipitation methods exhibit broadband emissions with bright blue, cyan, and orange colors, respectively. The information transmitted by specific SDPP is encrypted when different SDPPs are mixed. The confidential information can be decrypted by selecting the corresponding narrowband filter. Then, an encrypted quick response (QR) code with improved security is demonstrated based on this multi-channel selection strategy. Moreover, the three types of SDPPs exhibit three different water-triggered luminescence switching behaviors. The confidential information represented by Cs2NaInCl6:Sb can be erased/recovered through a simple water spray/drying. Whereas, the information collected from the green channel is permanently erased by moisture, which fundamentally avoids information leakage. Therefore, different encryption schemes can be designed to meet a variety of encryption requirements. The multicolor and stimuli-responsive luminescence greatly enrich the flexibility of optical information encryption, which leaps the level of security and confidentiality.

An Octopus-Inspired Stimulus-Responsive Structural Color Hydrogel for Uterus Cervical Canal Stent.

Soft-bodied aquatic organisms have exhibited remarkable capabilities in navigating and moving within liquid environments serving as a profound inspiration for the development of bionic robots with intricate movements. Traditional rigid components are being replaced by stimulus-responsive soft materials such as hydrogels and shape memory polymers, leading to the creation of dynamically responsive soft robots. In this study, the development of a bionic robot inspired by the shape of an octopus and the adsorptive properties of its tentacles, specifically tailored for targeted stimulation and pH sensing in the cervix, are presented. This approach involves the design of a soft, water-based Janus adhesive hydrogel patch that adheres to specific parts of the cervix and responds to pH changes through external stimuli. The hydrogel patch incorporates inverse opal microstructures mimicking the legs of an octopus, to facilitate efficient and stable locomotion, unidirectional transport of biofluids, and pH-responsive behavior. This miniature bionic robot showcases controlled adhesion and precise unidirectional fluid transport highlighting its potential for targeted stimulus response and pH sensing in the uterine cervical tract. This breakthrough opens new avenues for medical applications within the expanding field of soft-bodied robotics.

Monolithic 2D Perovskites Enabled Artificial Photonic Synapses for Neuromorphic Vision Sensors.

Neuromorphic visual sensors (NVS) based on photonic synapses hold a significant promise to emulate the human visual system. However, current photonic synapses rely on exquisite engineering of the complex heterogeneous interface to realize learning and memory functions, resulting in high fabrication cost, reduced reliability, high energy consumption and uncompact architecture, severely limiting the up-scaled manufacture, and on-chip integration. Here a photo-memory fundamental based on ion-exciton coupling is innovated to simplify synaptic structure and minimize energy consumption. Due to the intrinsic organic/inorganic interface within the crystal, the photodetector based on monolithic 2D perovskite exhibits a persistent photocurrent lasting about 90 s, enabling versatile synaptic functions. The electrical power consumption per synaptic event is estimated to be≈1.45 × 10-16 J, one order of magnitude lower than that in a natural biological system. Proof-of-concept image preprocessing using the neuromorphic vision sensors enabled by photonic synapse demonstrates 4 times enhancement of classification accuracy. Furthermore, getting rid of the artificial neural network, an expectation-based thresholding model is put forward to mimic the human visual system for facial recognition. This conceptual device unveils a new mechanism to simplify synaptic structure, promising the transformation of the NVS and fostering the emergence of next generation neural networks.

Implantable Resistive Strain Sensor-Decorated Colloidal Crystal Hydrogel Catheter for Intestinal Tract Pressure Sensing.

In the quest to develop advanced monitoring systems for intestinal peristaltic stress, this study introduces a groundbreaking approach inspired by nature's sensory networks. By the integration of novel materials and innovative manufacturing techniques, a multifunctional Janus hydrogel patch has been engineered. This unique patch not only demonstrates superior stress-sensing capabilities in the intricate intestinal environment but also enables adhesion to wet tissue surfaces. This achievement opens new avenues for real-time physiological monitoring and potential therapeutic interventions in the realm of gastrointestinal health.

Study on PTFE superhydrophobic coating modified by IC@dMSNs and its enhanced antibacterial effect.

INTRODUCTION: Vascular catheter-related infections and thrombosis are common and may lead to serious complications after catheterization. Reducing the incidence of such infections has become a significant challenge. OBJECTIVES: This study aims to develop a super hydrophobic nanocomposite drug-loaded vascular catheter that can effectively resist bacterial infections and blood coagulation. METHODS: In this study, a SiO2 nanocoated PTFE (Polytetrafluoroethylene) catheter (PTFE-SiO2) was prepared and further optimized to prepare a SiO2 nanocoated PTFE catheter loaded with imipenem/cilastatin sodium (PTFE-IC@dMSNs). The catheters were characterized for performance, cell compatibility, anticoagulant performance, in vitro and in vivo antibacterial effect and biological safety. RESULTS: PTFE-IC@dMSNs catheter has efficient drug loading performance and drug release rate and has good cell compatibility and anticoagulant effect in vitro. Compared with the PTFE-SiO2 catheter, the inhibition ring of the PTFE-IC@dMSNs catheter against Escherichia coli increased from 3.98 mm2 to 4.56 mm2, and the antibacterial rate increased from about 50.8 % to 56.9 %, with a significant difference (p < 0.05). The antibacterial zone against Staphylococcus aureus increased from 8.63 mm2 to 11.74 mm2, and the antibacterial rate increased from approximately 83.5 % to 89.3 %, showing a significant difference (p < 0.05). PTFE-IC@dMSNs catheter also has good biocompatibility in vivo. Furthermore, the PTFE-IC@dMSNs catheter can reduce the adhesion of blood cells and have excellent anticoagulant properties, and even maintain these properties even with the addition of imipenem/cilastatin sodium. CONCLUSION: Compared with PTFE, PTFE-SiO2 and PTFE-IC@dMSNs catheters have good characterization performance, cell compatibility, and anticoagulant properties. PTFE SiO2 and PTFE-IC@dMSNs catheters have good antibacterial performance and tissue safety against E. coli and S. aureus. Relatively, PTFE-SiO2 and PTFE-IC@dMSNs catheter has better antibacterial properties and histocompatibility and has potential application prospects in anti-bacterial catheter development and anticoagulation.

Colloidal crystals array enabled bionic biliary stent for efficient domestic biofluid management.

In vivo surgical interventions require effective management of biofluids, including controlling bleeding and removing excess biofluids such as bile, wound exudate, and blood. To address these issues, recent advances have emerged, such as self-sealing needles, drug-eluting stents, and shear-thinning hydrogels. However, complications associated with intestinal mucosal injury and secondary damage still persist. Therefore, a multifunctional stent is urgently required that can effectively remove excessive biofluid. Surface wettability of biliary stents is crucial in biofluid management, and conventional coatings can cause adhesion to wound tissue. To overcome this issue, we developed an interpenetrating Janus wettability stent coating, enabling unidirectional draining of excessive biofluid from its hydrophobic side to hydrophilic side, thereby preventing biofluid from wetting the wound. Furthermore, we demonstrate a directional biofluid movement using a self-pumping dressing in an infected tissue model, providing a new approach for in situ biofluid collection and disease diagnosis by detecting metal ion changes. Overall, our integrated system presents an opportunity to design wound dressings with effective biofluid management and metal ion detection capabilities.

Bioinspired hierarchical colloidal crystal paper with Janus wettability for oil/water separation and heavy metal ion removal.

Increasing attention has been paid recently to superwettability and its prospective potential applications in various fields. A new approach towards the establishment of flexible, self-assembled superhydrophobic surfaces with self-reported wettability on a variety of substrates has been advanced. The approach involves the fabrication of a dense monolayer of photonic crystal films that possess a layered structure with superior adhesion at the liquid-gas-solid interface. Thus, the resulting hierarchical photonic crystal film with a structurally hydrophobic surface offers a promising addition to the creation of durable and flexible superhydrophobic surfaces across a variety of substrates that exhibit the self-reported wettability. Furthermore, a bifunctional membrane that can effectively remove oil and adsorb heavy metal ions contained in wastewater has been developed for potential use in large-scale industrial wastewater treatment. This research sheds fresh light on the application of bionics and the lotus and mussel functions in oil/water separation.

The naked-eye detection of NH(3) -HCl by polyaniline-infiltrated TiO(2) inverse opal photonic crystals.

A reversible color change of a polyaniline-infiltrated TiO(2) inverse opal photonic crystal (PC) film can be obtained when the PC is switched from an acidic to alkali vapor environment. In a saturated NH(3) environment, the stopband of the as-prepared PCs changes from 556 to 688 nm; such large shift of 132 nm could be observed, corresponding to a clear color change from green to red. After placing in HCl vapor, the stopband undergoes a blue-shift and the color turns back to green. The result is ascribed to PANI being doped or dedoped by acid or base and the effective refractive index of the PC film varying accordingly. The naked-eye detection of NH(3) and HCl vapors can be realized by the reversible color change of the PC film, which is of importance for chemical and biological sensors.

Bioinspired conductive structural color hydrogels as a robotic knuckle rehabilitation electrical skin.

Electronic skins have attracted significant research interest in the biomedical engineering field including wearable devices, artificial prostheses, software robots, and so on. However, the integration of electronic skin for use in rehabilitation exercise remains unexplored. Here, we propose a novel, conductive structurally colored composite hydrogel for use as a robotic knuckle rehabilitation skin. It was found that the composite structure has an obvious color variation and electromechanical properties during the bending process. Therefore, this film could be used as a multi-signal response electronic skin to achieve real-time color sensing and electrical response, as well as for the human knuckle rehabilitation robot. These results indicated that the structurally colored composite hydrogels are valuable for use in many practical biomedical rehabilitation exercises where they are used as an electronic skin to give real-time color sensing and electrical response, and as well can be used in a human knuckle rehabilitation robot.

Mechanism of Photoinduced Phase Segregation in Mixed-Halide Perovskite Microplatelets and Its Application in Micropatterning.

Photoinduced phase segregation (PPS) is considered as a dominant factor that greatly deteriorates the performances of mixed-halide perovskite devices. However, the mechanism of PPS is still under fierce debate. Herein, CsPb(Brx/Cl1-x)3 microplatelets (MPs) with homogeneous and heterogeneous surfaces are obtained by controlling the growth conditions. Under continuous irradiation, a new photoluminescence (PL) band at 516 nm gradually appears in the heterogeneous MPs, accompanied with the decreased emission of the mixed phase at 480 nm, revealing the occurrence of PPS, while the photoirradiation only leads to slight PL dimming without PPS in the homogeneous MPs. The direct correlation between PPS and the structural heterogeneity indicates that the localized electric field-induced drift (LEFD) of halide ions/carriers is responsible for the PPS. In situ microfluorescence images evidence that the migration of halide ions is directed by the structural heterogeneity-induced localized electric field. Our refined model not only consolidates that PPS can be suppressed by eliminating the defects but also reveals that PPS can be directed by the distribution of defects. Therefore, a fluorescence micropatterning technique is developed based on PPS.

Tunable Multicolor Fluorescence of Perovskite-Based Composites for Optical Steganography and Light-Emitting Devices.

Multicolor fluorescence of mixed halide perovskites enormously enables their applications in photonics and optoelectronics. However, it remains an arduous task to obtain multicolor emissions from perovskites containing single halogen to avoid phase segregation. Herein, a fluorescent composite containing Eu-based metal-organic frameworks (MOFs), 0D Cs4PbBr6, and 3D CsPbBr3 is synthesized. Under excitations at 365 nm and 254 nm, the pristine composite emits blue (B) and red (R) fluorescence, which are ascribed to radiative defects within Cs4PbBr6 and 5D0→7FJ transitions of Eu3+, respectively. Interestingly, after light soaking in the ambient environment, the blue fluorescence gradually converts into green (G) emission due to the defect repairing and 0D-3D phase conversion. This permanent and unique photochromic effect enables anticounterfeiting and microsteganography with increased security through a micropatterning technique. Moreover, the RGB luminescence is highly stable after encapsulation by a transparent polymer layer. Thus, trichromatic light-emitting modules are fabricated by using the fluorescent composites as color-converting layers, which almost fully cover the standard color gamut. Therefore, this work innovates a strategy for construction of tunable multicolor luminescence by manipulating the radiative defects and structural dimensionality.

Power-Free and Self-Cleaning Solar Light Detector Based on the Temperature-Sensitive Structural Color and Photothermal Effect.

In this work, photothermal materials are integrated with a temperature-sensitive hydrogel and structural color for visually detecting solar intensity. Inspired by the functional performance of beetles, the photothermal layer is constructed by depositing candle soot on a film of Cu nanoparticles, while the temperature-sensitive colored hydrogel is fabricated by self-assembling colloidal photonic crystals on poly(N-isopropylacrylamide) (PNiPAM). The deposition of candle soot not only improves the photothermal performance but also leads to a superhydrophobic surface with a self-cleaning function. The photothermal layer absorbs sunlight and converts it into heat, which is then transferred to the hydrogel. The structural color of the hydrogel changes due to the heat-induced volume shrinkage. As the solar intensity increases from 0.62 to 1.27 kW/m2, the structural color conspicuously changes from red to orange, yellow, green, cyan, and blue, with reflection peaks shifting from 640 to 460 nm accordingly. The color change is highly apparent, which can be easily observed by the naked eye, suggesting that the solar intensity can be easily detected by reading out the structural color. This power-free and self-cleaning solar sensor can work for a long period without maintenance, which is suitable for a wide application prospect, such as smart home and agriculture.