Rapid screening and determination of 4-chloroamphetamine in saliva by paper spray-mass spectrometry and capillary electrophoresis-mass spectrometry.

A novel drug-screening system, consisting of paper spray-MS (PS-MS) and a CE-ESI-MS method was developed. This system can be easily switched either to PS-MS for rapidly screening samples or to the traditional CE-ESI-MS method for separation and to obtain detailed mass spectral information, while sharing the same mass spectrometer. In the former case, when a sharp (15°-tip) chromatography paper was used, the optimized distance from the paper tip to the mass inlet was 7.7 mm, whereas the optimized distance for the CE-ESI tip was ∼13.5 mm. Using 4-chloroamphetamine as a model compound, the LODs for PS-MS and CE-ESI-MS were determined to ∼0.1 and 0.25 ppm, respectively. Comparisons of results obtained using PS-MS and CE-ESI-MS and the experimental conditions are described.

Rapid screening and determination of designer drugs in saliva by a nib-assisted paper spray-mass spectrometry and separation technique.

A method for the rapid screening and determination of amphetamine-type designer drugs in saliva by a novel nib-assisted paper spray-mass spectrometry procedure is described. Under optimized conditions, the limit of detections for amphetamine derivatives (model samples: o-, m-, p-chloroamphetamine and o-, m-, p-fluoroamphetamine, respectively) were determined to 0.1 µg/mL by the nib-assisted paper spray-mass spectrometry method. This method is easier and has a higher sensitivity than similar methodologies, including atmospheric pressure/matrix-assisted laser desorption ionization mass spectrometry and electrospray-assisted laser desorption ionization/mass spectrometry. Data obtained using more classical separation methods, including liquid chromatography and capillary electrophoresis, are also reported.

Determination of nitroaromatic explosives residue at military shooting ranges using a sweeping-MEKC method.

We report on the application of sweeping-MEKC, for the first time, using the Environmental Protection Agency Method 8330 stock standard (a mixture of 14 explosives). The use of a traditional MEKC mode provided the LODs (at S/N=3) ranging from 1.5 to 2.9 microg/mL for the 14 explosives standards, which were improved by as low as 3.1-6.5 ng/mL when a sweeping-MEKC technique was used. A set of 21 soil samples were collected from surface soil at military shooting ranges located at Kinmen County in Taiwan, and the findings showed that hexahydro-1,3,5-trini-tro-1,3,5-triazine and 2,4,6-trinitrotoluene made up the explosives residue present at the highest concentrations. This study is very useful for determining current levels of explosives residue and as a reference for making appropriate recommendations concerning future site characterization techniques.

Optimization of separation and online sample concentration of N,N-dimethyltryptamine and related compounds using MEKC.

The optimal separation conditions and online sample concentration for N,N-dimethyltryptamine (DMT) and related compounds, including alpha-methyltryptamine (AMT), 5-methoxy-AMT (5-MeO-AMT), N,N-diethyltryptamine (DET), N,N-dipropyltryptamine (DPT), N,N-dibutyltryptamine (DBT), N,N-diisopropyltryptamine (DiPT), 5-methoxy-DMT (5-MeO-DMT), and 5-methoxy-N,N-DiPT (5-MeO-DiPT), using micellar EKC (MEKC) with UV-absorbance detection are described. The LODs (S/N = 3) for MEKC ranged from 1.0 1.8 microg/mL. Use of online sample concentration methods, including sweeping-MEKC and cation-selective exhaustive injection-sweep-MEKC (CSEI-sweep-MEKC) improved the LODs to 2.2 8.0 ng/mL and 1.3 2.7 ng/mL, respectively. In addition, the order of migration of the nine tryptamines was investigated. A urine sample, obtained by spiking urine collected from a human volunteer with DMT, was also successfully examined.

Applications of Hadamard transform to gas chromatography/mass spectrometry and liquid chromatography/mass spectrometry.

Successful application of the Hadamard transform (HT) technique to gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/mass spectrometry (LC/MS) is described. Novel sample injection devices were developed to achieve multiple sample injections in both GC and LC instruments. Air pressure was controlled by an electromagnetic valve in GC, while a syringe pump and Tee connector were employed for the injection device in LC. Two well-known, abused drugs, 3,4-methylenedioxy-N-methylamphetamine (MDMA) and N, N-dimethyltryptamine (DMT), were employed as model samples. Both of the injection devices permitted precise successive injections, resulting in clearly modulated chromatograms encoded by Hadamard matrices. After inverse Hadamard transformation of the encoded chromatogram, the signal-to-noise (S/N) ratios of the signals were substantially improved compared with those expected from theoretical values. The S/N ratios were enhanced approximately 10-fold in HT-GC/MS and 6.8 in HT-LC/MS, using the matrices of 1023 and 511, respectively. The HT-GC/MS was successfully applied to the determination of MDMA in the urine sample of a suspect.

Comparison of the separation of nine tryptamine standards based on gas chromatography, high performance liquid chromatography and capillary electrophoresis methods.

Nine tryptamines, including alpha-methyltryptamine (AMT), N,N-dimethyltryptamine (DMT), 5-methoxy-alpha-methyltryptamine (5-MeO-AMT), N,N-diethyltryptamine (DET), N,N-dipropyltryptamine (DPT), N,N-dibutyltryptamine (DBT), N,N-diisopropyltryptamine (DIPT), 5-methoxy-N,N-dimethyltryptamine (5-MeO-DMT), and 5-methoxy-N,N-diisopropyltryptamine (5-MeO-DIPT) were selected as model compounds. Comparisons of their sensitivity, selectivity, time, cost and the order of migration are described based on different separation techniques (GC, HPLC and CE, respectively). As a result, the limit of detection (S/N=3) obtained by GC/MS and LC/UV-absorption ranged from 0.5 to 15 microg/mL and 0.3 to 1.0 microg/mL, respectively. In contrast to this, based on the CZE/UV-absorption method, the limit of detection (S/N=3) was determined to 0.5-1 microg/mL. However, when the sweeping-MEKC mode was applied, it dramatically improved to 2-10 ng/mL. In the case of GC, HPLC and CE, migration times of the nine standards ranged from 11 to 15 min and 8 to 23 min by GC and HPLC, respectively; ranged from 20 to 26 min by sweeping-MEKC. The order of migration of DMT, DET, DPT and DBT follows the molecular weight, whereas the order of migration of AMT and 5-MeO-AMT (primary amines), DIPT (an isomer of DPT) and 5-methoxy-tryptamines (5-MeO-AMT, 5-MeO-DMT and 5-MeO-DIPT) can be altered by changing the separation conditions.

Separation of crystal violet dyes and its application to pen ink analysis using CZE and MEKC methods.

A crystal violet (CV) standard was irradiated under a Hg-Cd lamp for different exposure times to obtain various N-demethylation products. CZE effectively separated the photodegradation products based on molecular weight differences. In contrast, micellar EKC (MEKC), using SDS as the surfactant, was ineffective because the binding constants of the demethylation products and SDS were too close for separation. Nevertheless, MEKC analysis of ink has applications in forensic science because MEKC separated neutral components in the inks. Thus, MEKC can be used to obtain an ink "fingerprint" since each ink is unique depending on the location and time it was made. In contrast, CZE is useful for dating inks because CV is the primary ink dye and it photodegrades slowly.

Optimization of the separation and on-line sample concentration of phenethylamine designer drugs with capillary electrophoresis-fluorescence detection.

Five 2C-series of phenethylamine designer drugs, including 2,5-dimethoxy-4-ethylthio-phenethylamine (2C-T-2), 2,5-dimethoxy-4-(n)-propylthiophenethylamine (2C-T-7), 4-chloro-2,5-dimethoxyphenethylamine (2C-C), 4-bromo-2,5-dimethoxy-phenethylamine (2C-B), 2,5-dimethoxy-4-iodo-phenethylamine (2C-I), were synthesized and standard GC/MS and fluorescence spectra are reported for them. A mixture of the five drugs was separated and detected by means of capillary electrophoresis (CE) with native fluorescence and light emitting diode (LED)-induced fluorescence (LIF) detection, respectively, for comparison. In the former case, exciting at a wavelength of 300 nm from a Xe lamp was used. The detection limits were found to be only in the range of approximately 10(-4) M by the micellar electrokinetic chromatography (MEKC) mode but were improved to approximately 10(-7) M when the sweeping-MEKC mode was used. For a highly sensitive analysis, LED-induced fluorescence detection was examined by derivatizing the compounds with a fluorescent dye, fluorescein isothiocyanate isomer I (FITC). A blue-LED (approximately 2 mW) was used as the fluorescence excitation source. The detection limits were improved to approximately 10(-7) and approximately 10(-8) M, respectively, when the MEKC and stacking-MEKC modes were applied. A mimic urine sample was obtained by spiking urine from a volunteer with the five standards, and after liquid-liquid extraction, the sample was examined by means of the MEKC-LIF mode. The extraction procedures used for the urine sample and the CE conditions for the separation were optimized.

Sample-stacking techniques in non-aqueous capillary electrophoresis.

In sample-stacking techniques, the detection limit cannot be improved by simply increasing the length of the sample solution, because the individual electrophoretic parameters must be optimized. In an attempt to increase the amount of sample injected, as well as to focus them onto a small zone, two novel methods are proposed. One of these employs an "ultra-high conductivity zone", which was inserted between the sample zone and background solution to build an unequal conductivity gradient. The other employs a "low temperature bath". A portion of the capillary (near the junction between the sample solution and the background solution) was immersed in a low temperature bath, which served as a "pseudo-high-conductivity zone" due to the fact that conductivity would increases when the temperature is decreased. As a result, a large volume of sample injection can be achieved. Using 3,4-methylenedioxymethamphetamine as a model compound, the detection limit was determined to be 1.6 x 10(-6) M (S/N = 3) by means of normal non-aqueous capillary electrophoresis (NACE). This could be improved to 3.0 x 10(-8) M, 4.8 x 10(-9) M and 5.0 x 10(-9) M, respectively, when the normal stacking, ultra-high conductivity zone NACE-stacking and the low-temperature zone NACE-stacking methods were applied.

Free-Radical Reactions of Trialkylboranes with beta-Nitrostyrenes To Generate Alkenes.

beta-Nitrostyrenes 1 react with trialkylboranes under a nitrogen atmosphere to generate high yields of alkenes 2. The mechanism is proposed to be a free-radical reaction via NO(2)/alkyl substitution since the reaction is stimulated by the presence of a trace of oxygen in the nitrogen or tert-butyl peroxide or by photolysis and is retarded or inhibited by the addition of galvinoxyl to the solution.

Optimization of the separation of lysergic acid diethylamide in urine by a sweeping technique using micellar electrokinetic chromatography.

The separation and on-line concentrations of lysergic acid diethylamide (LSD), iso-lysergic acid diethylamide (iso-LSD) and lysergic acid N,N-methylpropylamide (LAMPA) in human urine were investigated by capillary electrophoresis-fluorescence spectroscopy using sodium dodecyl sulfate (SDS) as an anionic surfactant. A number of parameters such as buffer pH, SDS concentration, Brij-30 concentration and the content of organic solvent used in separation, were optimized. The techniques of sweeping-micellar electrokinetic chromatography (sweeping-MEKC) and cation-selective exhaustive injection-sweep-micellar electrokinetic chromatography (CSEI-sweep-MEKC) were used for determining on-line concentrations. The advantages and disadvantages of this procedure with respect to sensitivity, precision and simplicity are discussed and compared.

The bioactivity of 2,5-dimethoxy-4-ethylthiophenethylamine (2C-T-2) and its detection in rat urine by capillary electrophoresis combined with an on-line sample concentration technique.

The bioactivity of 2,5-dimethoxy-4-ethylthiophenethylamine (2C-T-2) on nitric oxide (NO) production and the proliferation of spleen and thymus lymphocytes to mitogen stimulation in mice are reported for the first time. NO production by T and B lymphocytes in spleen and T cells in the thymus of mice decreased after the oral administration of 2C-T-2. This indicates that 2C-T-2 intake may perturb both neural and immune activity since a decrease in NO production is indicative of a weakened defense function. 2C-T-2 (the parent drug) in rat urine samples was detected by means of capillary electrophoresis/UV absorbance combined with an on-line sample concentration technique. When the CZE and MEKC modes were employed, the detection limit was found to be 4.5 and 5.0 microg/mL (at a 92.1% confidence level); whereas when on-line sample concentration methods, including stacking and sweeping-micellar electrokinetic chromatography were used, the detection limits were improved to 19.2 and 9.1 ng/mL, respectively. In an analysis of some actual samples from animal experiments, three male rats were administered 20 microg/g of body weight of 2C-T-2 by intra-peritoneal injection. The first- and second-day urine fractions were collected after the administration, for use in the analysis. As a result, 2.9 microg/mL and 0.25 microg/mL of 2C-T-2, respectively, were detected after ingestion of the doses.

Identification of 2,5-dimethoxy-4-ethylthiophenethylamine and its metabolites in the urine of rats by gas chromatography-mass spectrometry.

A simple and specific method based on gas chromatography-selected ion monitoring-mass spectrometry (GC-SIM-MS) for the analysis of in vivo metabolism of 2,5-dimethoxy-4-ethylthiophenethylamine (2C-T-2) in rats is described. Three male rats were administered 20 mg/kg of 2C-T-2 by intra-peritoneal injection, and 24 h urine fractions were collected before and after the administration for analysis. After acidic hydrolysis of the urine samples, the metabolites were liquid-liquid extraction and analyzed by a quadruple mass spectrometer in the selected ion monitoring mode. The findings show that four metabolites of 2-(4-ethylthio-2,5-dimethoxyphenyl)-ethanol (Mw: 242), 4-ethylthio-2,5-dimethoxyphenyl acetic acid (Mw: 256), 1-acetoamino-2-(2-hydroxy-4-ethylthio-5-methoxyphenyl)-ethane (Mw: 269) and 1-acetoamino-2-(2-methoxy-4-ethylthio-5-hydroxyphenyl)-ethane (Mw: 269) are present and the metabolic pathway for 2C-T-2 in the rat is proposed.

Rapid analysis of 3,4-methylenedioxymethamphetamine: a comparison of nonaqueous capillary electrophoresis/fluorescence detection with GC/MS.

Because of the increasing use of 3,4-methylenedioxymethamphetamine (3,4-MDMA), a rapid and sensitive analytical technique is required for its detection and determination. Using nonaqueous capillary electrophoresis/fluorescence spectroscopy (NACE/FS) detection, it is possible to determine this drug at the level 0.5 ppm without any pre-treatment in less than 5 min. After liquid-liquid extraction, the sample can be condensed and a detection limit of 3,4-MDMA in urine of 50 ppb (S/N = 3) can be achieved. The precision of the method was evaluated by measuring the repeatability and intermediate precision of migration time and the corrected peak height by comparison with a 3,4-MDMA-D5 internal standard. With the conventional GC/MS method, it is necessary to derivatize the 3,4-MDMA before injection and the GC migration time also is in excess of 20 min. Therefore, NACE/FS represents a good complementary method to GC/MS for use in forensic analysis.

Optimization of a simple method for the chiral separation of methamphetamine and related compounds in clandestine tablets and urine samples by beta-cyclodextrine modified capillary electrophoresis: a complementary method to GC-MS.

The chiral separation of (+/-)-methamphetamine, (+/-)-methcathinone, (+/-)-ephedrine and (+/-)-pseudoephedrine by means of beta-cyclodextrine modified capillary electrophoresis is described. The distribution of enantiomers in clandestine tablets and urine samples were identified. Several electrophoretic parameters such as the concentration of beta-cyclodextrin, temperature, the applied voltage and the amount of organic solvent required for successful separation were optimized. The method, as described herein, represents a good complementary method to GC-MS for use in forensic and clinical analysis.

A microwave-assisted fluorescent labeling method for the separation and detection of amphetamine-like designer drugs by capillary electrophoresis.

A microwave-assisted fluorescence labeling method for use in CE-LIF (capillary electrophoresis-laser induced fluorescence) is described. Six amphetamine-like designer drugs, namely, o-, m-, p-chloro- and o-, m-, p-fluoro-amphetamine derivatives, were synthesized and used as model compounds. FITC (fluorescein isothiocyanate isomer I) and a blue-laser were used as the fluorescent labeling reagent and excitation source, respectively. When a microwave oven was used, the reaction was complete within ∼5 min, while the classical method required at least 20 h (usually, an overnight reaction). A mimic oral fluid sample was obtained by spiking oral fluid from a volunteer with the six standards, and after liquid-liquid extraction and microwave-derivatization, it was possible to process the analytes by CE-LIF within a period of ∼10 min; the wavelength of the blue-laser used was 473 nm. For comparison, data obtained using classical methods, including CZE-UV (capillary zone electrophoresis-UV absorbance detection), sweeping-MEKC-UV (micellar electrokinetic chromatography-UV absorbance detection) and LC-Q-TOFMS (liquid chromatography/electrospray ionization quadrupole time-of-flight mass spectrometry) are also reported.

Simultaneous separation and detection of 18 phenethylamine/tryptamine derivatives by liquid chromatography-UV absorption and -electrospray ionization mass spectrometry.

The optimal conditions for the separation and detection of a mixture of 18 phenethylamine/tryptamine derivatives were determined, using liquid chromatography/UV-absorption (LC/UV) and liquid chromatography/electrospray ionization mass spectrometry (LC/ESI MS) methods, respectively. Complete separation could be achieved within approximately 25 min using gradient elution (A, 0.1% formic acid aqueous solution/pH 2.5; B, acetonitrile). The limit of detection (LOD at S/N = 3) obtained by LC/UV-absorption (absorption wavelength, 280 nm) was in the range from 0.3 to 3 microg/mL. In contrast, when the LC/ESI MS method was used, the LODs for primary, secondary and tertiary amines were in the ranges 0.1-3.0, 0.1-0.2, and 0.05-1.8 microg/mL, respectively. The lower LOD obtained for a tertiary amine can be attributed to the fact that its ionization efficiency (during the ESI process) is better than the others. In order to improve the LOD of a primary/secondary amine, a derivatization procedure was used in which the chemical structure was altered to a secondary/tertiary amine, via a reaction with acetic anhydride. As a result, the LODs for primary/secondary amines could be significantly improved. The characteristic mass fragmentations of the 18 phenethylamine/tryptamine derivatives, as well as the products of the reaction with acetic anhydride, were investigated, and the data were reported. A urine sample was obtained by spiking urine from a volunteer with the 18 derivatives, and after liquid-liquid extraction the sample was examined by LC/UV and LC/ESI MS, respectively. The extraction procedures used for the urine sample and the experimental conditions for the separation and detection were optimized.

Development of spray deposition/MALDI-TOFMS and its application to the rapid screening of hydrolysis products derived from nitrogen mustards.

A novel method for preparing samples for use in MALDI-TOFMS (matrix-assisted laser desorption ionization time-of-flight mass spectrometry) is described. Seven hydrolysis products derived from nitrogen mustards and CHCA (alpha-cyano-4-hydroxycinnamic acid) were selected as model compounds and the matrix, respectively. A capillary atomizer was used for evaporative and spray deposition of the sample/matrix solution, leading to the formation of a freestanding film that coated and accumulated on the MALDI substrate (i.e., sample plate). Compared to the traditional method for MALDI, which involves the production of dried droplets, the surface roughness was reduced, resulting in the accumulation of the sample-doped matrix on the sample plate. This resulted in an increase in the limit of detection of 1 - 2 orders of magnitude. In order to compare the structures of the sample-doped matrices obtained by the traditional dried droplet method versus the spray deposition method (developed in this study), the matrices were examined by SEM (scanning electron microscopy). The design of the capillary atomizer and details of the experimental conditions are reported. The application of this method to the above seven degradation products was successful, suggesting that it has great potential for use as a routine monitoring tool.

A general approach to the screening and confirmation of tryptamines and phenethylamines by mass spectral fragmentation.

Certain characteristic fragmentations of tryptamines (indoleethylamine) and phenethylamines are described. Based on the GC-EI/MS, LC-ESI/MS and MALDI/TOFMS, the mass fragmentations of 13 standard compounds, including alpha-methyltryptamine (AMT), N,N-dimethyltryptamine (DMT), 5-methoxy-alpha-methyltryptamine (5-MeO-AMT), N,N-diethyltryptamine (DET), N,N-dipropyltryptamine (DPT), N,N-dibutyltryptamine (DBT), N,N-diisopropyltryptamine (DIPT), 5-methoxy-N,N-dimethyltryptamine (5-MeO-DMT), 5-methoxy-N,N-diisopropyltryptamine (5-MeO-DIPT), methamphetamine (MAMP), 3,4-methylenedioxyamphetamine (3,4-MDA), 3,4-methylenedioxymethamphetamine (3,4-MDMA) and 2-methylamino-1-(3,4-methylenedioxyphenyl)butane (MBDB), were compared. As a result, the parent ions of these analytes were hard to be obtained by GC/MS whereas the protonated molecular ions can be observed clearly by means of ESI/MS and MALDI/TOFMS. Furthermore, two major characteristic fragmentations, namely and alpha-cleavage ([M+H](+)-->[3-vinylindole](+)) and beta-cleavage ([M+H](+)-->[CH(2)N(+)R(N1)R(N2)]), are produced when the ESI and MALDI modes are used, respectively. In the case of ESI/MS, the fragment obtained from alpha-cleavage is the major process. In contrast to this, in the case of MALDI/TOFMS, the major fragment is produced via beta-cleavage. The ionization efficiency and fragments formed from either alpha- or beta-cleavages are closely related to the degree of alkylation of the side chain nitrogen in both cases.