[Main components in different varieties of Xihuangcao by UPLC-Q-TOF-MS and UPLC-DAD].

This study established an ultra-high performance liquid chromatography coupled with quadrupole-time-of-flight mass spectrometry(UPLC-Q-TOF-MS) method to analyze the main components in different varieties of Xihuangcao and established a UPLC-DAD method to simultaneously determine the five active components(caffeic acid, rosmarinic acid, schaftoside, isoschaftoside, and oridonin).The chromatographic separation was performed on a Waters ACQUITY UPLC BEH C_(18) column(2.1 mm×100 mm, 1.7 µm) with a gradient elution of methanol(B)-water containing 0.1% formic acid(A) at a flow rate of 0.3 mL·min~(-1).The column temperature was 30 ℃.The Q-TOF-MS discriminant analysis was performed under positive electrospray ion mode and the split ratio was 1∶1. Quantitative analysis was carried out by UPLC-DAD.The determination wavelength was set at 245 nm.Thirty-two main components of Xihuangcao were separated and identified by UPLC-Q-TOF-MS, where 19 were identified in Rabdosia serra, nine in R.nervosa, 10 in R.lophanthoides, 15 in R.lophanthoides var.graciliflora, 10 in R.lophanthoides var.gerardianus, and seven in R.stracheyi.The UPLC-DVD method was developed for simultaneously determining five active components in different varieties of Xihuangcao.The standard curves for five compounds showed good linearity with correlation coefficients higher than 0.999 0.The precision, repeatability, and stability were good.The average recoveries(n=6) were between 97.01% and 102.7% with RSD<3.0%.The results of UPLC-Q-TOF-MS analysis provided a scientific basis for the use of R.stracheyi as a medicinal material of Xihuangcao and the equivalent use of R.lophanthoides var.gerardianus with R.lophanthoides var.graciliflora to some extent.The UPLC-DAD method for simultaneously determining five active components is simple, rapid, and accurate.This study can provide the basis for the quality control of different varieties of Xihuangcao.

Curcumin attenuates Adriamycin-resistance of acute myeloid leukemia by inhibiting the lncRNA HOTAIR/miR-20a-5p/WT1 axis.

Acute myeloid leukemia (AML) is a common subtype of leukemia, and a large proportion of patients with AML eventually develop drug resistance. Curcumin exerts cancer suppressive effects and increases sensitivity to chemotherapy in several diseases. This study aimed to investigate the mechanism by which curcumin affects the resistance of AML to Adriamycin by regulating HOX transcript antisense RNA (HOTAIR) expression. Cell viability, colony-formation, flow cytometry, and Transwell assays were used to assess cell proliferation, apoptosis, and migration. A dual-luciferase reporter assay was used to verify the interaction between microRNA (miR)-20a-5p and HOTAIR or Wilms' tumor 1 (WT1). RT-qPCR and Western blotting assays were performed to detect gene and protein expression. The results showed that curcumin suppressed the resistance to Adriamycin, inhibited the expression of HOTAIR and WT1, and promoted the expression of miR-20a-5p in human acute leukemia cells (HL-60) or Adriamycin-resistant HL-60 cells (HL-60/ADR). Furthermore, curcumin suppressed proliferation and promoted apoptosis of HL-60/ADR cells. Overexpression of HOTAIR reversed the regulatory effect of curcumin on apoptosis and migration and restored the effect of curcumin on inducing the expression of cleaved caspase3, Bax, and P27. In addition, HOTAIR upregulated WT1 expression by targeting miR-20a-5p, and inhibition of miR-20a-5p reversed the regulation of Adriamycin resistance by curcumin in AML cells. Finally, curcumin inhibited Adriamycin resistance by suppressing the HOTAIR/miR-20a-5p/WT1 pathway in vivo. In short, curcumin suppressed the proliferation and migration, blocked the cell cycle progression of AML cells, and sensitized AML cells to Adriamycin by regulating the HOTAIR/miR-20a-5p/WT1 axis. These findings suggest a potential role of curcumin and HOTAIR in AML treatment.

Cage Based Crystalline Covalent Organic Frameworks.

The first two cage based crystalline covalent organic frameworks, cage-COF-1 and cage-COF-2, were constructed from a prism-like three-aldehyde-containing molecular cage. The cage contains two horizontal phloroglucinol and three vertical triazine moieties forming three identical V-shaped cavities. By reacting with p-phenylenediamine and 4,4'-biphenyldiamine, the two cage-COFs were formed with a hexagonal skeleton and possess a unique structure. Due to the pillared cage nodes, the linkers are hanging with their π-surfaces but not C-H sites exposed to the pore, and enjoy certain rotational dynamics as suggested by 13C CP/MAS NMR. The antidirection of the diimine linkages leads to rippled layers which pack in unique ABC mode through alternate stacking of the cage twosided faces in both AB and AC layers. Such packing forms trigonal channels along c axis which are interconnected in ab plane due to the large open space created across the hanging linkers, resembling the porous characteristics of 3D COFs. The cage-COFs have a permanent porosity and can adsorb CO2 facilitated by the intrinsic cage cavities that serve as prime adsorption sites. The unprecedented cage-COFs not only merge the borderline of 2D and 3D COFs but also bridge porous organic cages to extended crystalline organic frameworks.

Molecular Barrel by a Hooping Strategy: Synthesis, Structure, and Selective CO2 Adsorption Facilitated by Lone Pair-π Interactions.

A sophisticated molecular barrel 5 was efficiently constructed by hooping a 63-membered loop around a D3h-symmetric, shape-persistent bis(tetraoxacalix[2]arene[2]triazine) core. The hooping strategy involved 3-fold ring-closing metathesis (RCM) reactions of six branched olefin arms which were preanchored on the inner core. Through hooping, the loop tightens the cage structure and significantly enhances its stability toward nucleophilic decomposition. The X-ray crystal structure showed the molecular barrel bears three enclosed fan-shaped cavities as divided by the triazine rings and each of the cavities can hold a solvent CHCl3 or CH2Cl2 molecule. With the intrinsic porosity, the amorphous solids of 5 exhibit considerable CO2 uptake with an exceptionally large isosteric enthalpy. Lone pair (lp)-π interactions between the electron-deficient triazine rings and CO2 could contribute to the strong adsorption as supported by IR studies and DFT modeling.

Pathological Changes in APP/PS-1 Transgenic Mouse Models of Alzheimer's Disease Treated with Ganoderma Lucidum Preparation.

Objective To explore the efficacy of ganoderma lucidum preparation(Ling Zhi) in treating APP/PS-1 transgenic mouse models of Alzheimer's disease(AD).Methods APP/PS-1 transgenic mice of 4 months were randomly divided into model group,ganoderma lucidum treatment groups,including high [2250 mg/(kg·d)] and middle [750 mg/(kg·d)] dose groups,i.e.LZ-H and LZ-M groups,and the positive control group(treated with donepezil hydrochloride [2 mg/(kg·d)]).In addition,C57BL/6J wild mice were selected as normal group.The animals were administered for 4 months.Histopathological examinations including hematoxylin-eosin(HE) staining,immunohistochemistry,special staining,and electron microscopy were applied,and then the pathological morphology and structures in different groups were compared. Results The senile plaques and neurofibrillar tangles in the cerebrum and cerebellum were dissolved or disappeared in LZ-H and LZ-M groups.Decrease of amyloid angiopathy was found in LZ-H and LZ-M groups.The immature neurons appeared more in hippocampus and dentate nucleus of LZ-H and LZ-M groups than those in AD model and donepezil hydrochloride groups(hippcampus:F=1.738,P=0.016;dentate nucleus:F=1.924,P=0.026),and these immature neurons differentiated to be neurons.More Purkinje cells loss occurred in AD model mice than that in LZ-H and LZ-M groups(F=9.46,P=0.007;F=9.46,P=0.010).The LZ-H and LZ-M groups had more new neuron stem cells grown up in cerebellum.Electromicroscopic examination showed the hippocampal neurons in LZ-H and LZ-M group were integrated,the nuclear membrane was intact,and the mitochondria in the cytoplasm,endoplasmic reticulum,Golgi bodies,microtubules,and synapses were also complete.The microglial cell showed no abnormality.No toxicity appeared in the pathological specimens of mice treated with ganoderma lucidum preparation.Conclusion The ganoderma lucidum preparation can dissolve and decline or dismiss the senile plaques and neurofibrillar tangles in the brain of AD mice and also reduce the amyloid angiopathy.

Regio- and Enantioselective Photodimerization within the Confined Space of a Homochiral Ruthenium/Palladium Heterometallic Coordination Cage.

The photoinduced regio- and enantioselective coupling of naphthols and derivatives thereof is achieved in the confined chiral coordination space of a RuII metalloligand based cage. The racemic or enantiopure cages encapsulate naphthol guests, which then undergo a regiospecific 1,4-coupling, rather than the normal 1,1-coupling, to form 4-(2-hydroxy-1-naphthyl)-1,2-napthoquinones; moderate stereochemical control is achieved with homochiral cages. The photoreactions proceed under both aerobic and anaerobic conditions but through distinct pathways that nevertheless involve the same radical intermediates. This unusual dimerization constitutes a very rare example of asymmetric induction in biaryl coupling by making use of coordination cages with dual functionality-photoredox reactivity and stereoselectivity.

An Approach to Optically Pure Bridging Chiral p-tert-Butylcalix[4]arenes through a Homologous Anionic Ortho-Fries Rearrangement.

A novel efficient approach to optically pure bridging chiral calix[4]arenes through a homologous anionic ortho-Fries rearrangement of inherently chiral calix[4]arenes was presented for the first time. As a result, two pairs of N,N'-dimethylformamidyl-substituted bridging chiral p-tert-butylcalix[4]arene enantiomers were facilely obtained. Their absolute configurations were determined through ROESY analysis, ECD comparison, and X-ray crystallographic analysis.

Qualitative analysis of the helical electronic energy of inherently chiral calix[4]arenes: an approach to effectively assign their absolute configuration.

For all microhelices on aromatic rings of inherently chiral calix[4]arene, an expression was derived from one approximation and one hypothesis on the basis of the electron-on-a-helix model of Tinoco and Woody as follows: 1/E = µ(H - KΔα2), where µ = 1 for the right-handed microhelix and µ = -1 for the left-handed microhelix; and H and K are constant and greater than zero. The expression correlates microhelical electronic energy (E) with the atom polarizability difference (Δα) on both microhelix ends, which intuitively and clearly shows the impact of helical substituent polarizability on helical electronic energy. The case analysis almost entirely proves that the qualitative analysis of the helical electronic energy of inherently chiral calix[4]arenes with the expression is scientific and can be used to effectively assign their absolute configuration.

Starburst triarylamine based dyes bearing a 3,4-ethylenedioxythiophene linker for efficient dye-sensitized solar cells.

Starburst triarylamine-based organic dyes (D1, D2, and D3) have been synthesized. For the three designed dyes, the starburst triarylamine group, thiophene (or 3,4-ethylenedioxythiophene), and cyanoacetic acid take the role of electron donor, π-conjugation bridge, and electron acceptor, respectively. These compounds are characterized by photophysical, electrochemical, and theoretical computational methods. Nanocrystalline TiO2-based dye-sensitized solar cells were fabricated using these molecules as light-harvesting sensitizers. The overall efficiencies of the sensitized cells range from 5.48 to 6.15%. It was found that the introduction of the EDOT group in D3 bathochromically extended the absorption spectra, resulting in a leap in the photovoltaic performance in comparison to D2. Incorporation of a hydrophobic carbazole-containing segment at D2 relative with D1 retarded the electron transfer from TiO2 to the oxidized dye or electrolyte, leading to an increase of electron lifetime.

Hydrothermal fabrication of quasi-one-dimensional single-crystalline anatase TiO2 nanostructures on FTO glass and their applications in dye-sensitized solar cells.

One-dimensional and quasi-one-dimensional semiconductor nanostructures are desirable for dye-sensitized solar cells (DSSCs), since they can provide direct pathways for the rapid collection of photogenerated electrons, which could improve the photovoltaic performance of the device. Quasi-1D single-crystalline anatase TiO(2) nanostructures have been successfully prepared on transparent, conductive fluorine-doped tin oxide (FTO) glass with a growth direction of [101] through a facile hydrothermal approach. The influences of the initial titanium n-butoxide (TBT) concentration, hydrothermal reaction temperature, and time on the length of quasi-1D anatase TiO(2) nanostructures and on the photovoltaic performance of DSSCs have been investigated in detail. A power conversion efficiency of 5.81% has been obtained based on the prepared TiO(2) nanostructure photoelectrode 6.7 µm thick and commercial N719 dye, with a short-circuit current density of 13.3 mA cm(-2) , an open-circuit voltage of 810 mV, and a fill factor of 0.54.

Inherently chiral calixarenes: synthesis, optical resolution, chiral recognition and asymmetric catalysis.

Inherently chiral calixarenes, whose chirality is based on the absence of a planar symmetry or an inversion center in the molecules as a whole through the asymmetric array of several achiral groups upon the three-dimensional calix-skeletons, are challenging and attractive chiral molecules, because of their potential in supramolecular chemistry. The synthesis and optical resolution of all varieties of inherently chiral calixarenes are systematically discussed and classified, and their applications in chiral recognition and asymmetric catalysis are thoroughly illustrated in this review.

A Robust Photocatalytic Hybrid Material Composed of Metal-Organic Cages and TiO2 for Efficient Visible-Light-Driven Hydrogen Evolution.

The design of photochemical molecular devices (PMDs) for photocatalytic H2 production from water is a meaningful but challenging subject currently. Herein, a Pd2 L4 type metal-organic cage (denoted as MOC-Q2) is designed as a PMD, which consists of two catalytic centers (Pd2+ ) and four photosensitive ligands (L-2) with four pyridine anchoring groups. Subsequently, the MOC-Q2 is combined with TiO2 to form TiO2 -MOC-Q2 hybrid materials with different MOC-Q2 contents by a facile sol-gel method, which have micro/mesoporous structures and large surface areas. The optimized TiO2 -MOC-Q2 (6.5 wt%) exhibits high H2 production activity (7.9 mmol g-1 h-1 within 5 h) and excellent durability, giving a TON value of 23477 or 11739 (based on MOC-Q2 or Pd moles) after recycling for 7 rounds. By contrast, the pure MOC-Q2 only shows an ordinary photocatalytic H2 production rate (0.84 mmol g-1 h-1 within 5 h) in the homogeneous system. It can be deduced that TiO2 drives the photocatalysis and simultaneously acts as the structure promoter. This study presents a meaningful and distinctive attempt of a new approach for the design and development of MOC-based heterogeneous photocatalysts.

Constructing Heterogeneous Direct Z-Scheme Photocatalysts Based on Metal-Organic Cages and Graphitic-C3N4 for High-Efficiency Photocatalytic Water Splitting.

The development of artificial devices that mimic the highly efficient and ingenious photosystems in nature is worthy of in-depth study. A metal-organic cage (MOC) Pd2(M-4)4(BF4)4, denoted as MOC-Q1, integrating four organic photosensitized ligands M-4 and two Pd2+ catalytic centers is designed for a photochemical molecular device (PMD). MOC-Q1 is successfully immobilized on graphitic carbon nitride (g-C3N4) by hydrogen bonds to obtain a robust heterogeneous direct Z-scheme g-C3N4/MOC-Q1 photocatalyst for H2 generation under visible light. The optimized g-C3N4/MOC-Q1 (2 wt %) system shows high hydrogen evolution activity (4495 µmol g-1 h-1 based on the catalyst mass) and exhibits stable performances for 25 h (a turnover number of 19,268 based on MOC-Q1), significantly outperforming pure MOC-Q1, g-C3N4, and comparsion materials Pd/g-C3N4/M-4, which is the highest one of all reported heterogeneous MOC-based photocatalysts under visible irradiation. This enhancement can be ascribed to the synergistic effects of high-efficient electron transfer, extended visible-light response region, and good protective environment for MOC-Q1 arising from an efficient direct Z-scheme heterostructure of g-C3N4/MOC-Q1. This rationally designed and synthesized MOC/g-C3N4-based heterogeneous PMD is expected to have great potential in photocatalytic water splitting.

Robust Heterogeneous Photocatalyst for Visible-Light-Driven Hydrogen Evolution Promotion: Immobilization of a Fluorescein Dye-Encapsulated Metal-Organic Cage on TiO2.

The design of artificial photocatalytic devices that simulates the ingenious and efficient photosynthetic systems in nature is promising. Herein, a metal-organic cage [Pd6(NPyCzPF)12]12+ (MOC-PC6) integrating 12 organic ligands NPyCzBP and 6 Pd2+ catalytic centers is designed, which is well defined to include organic dye fluorescein (FL) for constructing a supramolecular photochemical molecular device (SPMD) FL@MOC-PC6. Photoinduced electron transfer (PET) between MOC-PC6 and the encapsulated FL has been observed by steady-state and time-resolved emission spectroscopy. FL@MOC-PC6 is successfully heterogenized with TiO2 by a facile sol-gel method to achieve a robust heterogeneous FL@MOC-PC6-TiO2. The close proximity between the Pd2+ catalytic site and FL included in the cage enables PET from the photoexcited FL to Pd2+ sites through a powerful intramolecular pathway. The photocatalytic hydrogen production assessments of the optimized 4 wt % FL@MOC-PC6-TiO2 demonstrate an initial H2 production rate of 2402 µmol g-1 h-1 and a turnover number of 4356 within 40 h, enhanced by 15-fold over that of a homogeneous FL@MOC-PC6. The effect of the MOC content on photocatalytic H2 evolution (PHE) is investigated and the inefficient comparison systems, such as MOC-PC6, MOC-PC6-TiO2, FL-sensitized MOC-PC6/FL-TiO2, and analogue FL/MOC-PC6-TiO2 with free FL, are evaluated. This study provides a creative and distinctive approach for the design and preparation of novel heterogeneous SPMD catalysts based on MOCs.

Assembly of robust and porous hydrogen-bonded coordination frameworks: isomorphism, polymorphism, and selective adsorption.

By using the tripodal ligand ntb (tris(benzimidazole-2-ylmethyl)amine) and lanthanide nitrate, three isomorphous series of coordination frameworks of the general formula [Ln(ntb)(NO(3))(3)]·solvents (series 1: monoclinic C2/c, Ln = Gd(3+) and Yb(3+); series 2: hexagonal P3(1)/c, Ln = Nd(3+), Eu(3+), Gd(3+), and Er(3+); series 3, cubic Pa3̅, Ln = Gd(3+) and Er(3+); solvent = H(2)O or CH(3)OH) have been assembled and characterized with IR, elemental analyses, and single crystal and powder X-ray diffraction methods. In all isomorphous complexes, analogous [Ln(ntb)(NO(3))(3)] coordination monomers of the same structure act as the building blocks to be assembled via hydrogen bonds into three-dimensional (3D) frameworks. So the complexes of the same lanthanide ion (for example, the Gd(3+) ion) from three isomorphous series form polymorphs, for example, monoclinic polymorph 1-Gd, hexagonal polymorph 2-Gd, and cubic polymorph 3-Gd. The single-crystal analyses revealed that the polymorphism was related to different fashions of hydrogen bonding interactions, which was caused by different crystallization conditions, leading to the formation of different 3D hydrogen-bonded frameworks showing distinct porous and topological structures. The monoclinic and hexagonal crystals contain 1D channels, while the cubic crystal is nonporous. The thermogravimetric analyses indicated that all polymorphic crystals have high thermal stability against the removal of guest molecules, and the robust porosity of the hexagonal crystals has been verified by temperature-dependent single-crystal-to-single-crystal measurements upon guest removal/uptake. The solvents adsorption study disclosed that the porous frameworks show high selectivity of benzene against toluene and xylene, while the gas adsorption measurements indicated a moderate H(2), CO(2), and MeOH storage capacity in contrast to low N(2) uptake. The solid-state photoluminescence of the Eu(3+) and Nd(3+) complexes in the near-infrared and visible region has also been investigated, offering examples with optical properties tunable by means of isomorphous replacement.

Photocatalytic H2 Production from Water by Metal-free Dye-sensitized TiO2 Semiconductors: The Role and Development Process of Organic Sensitizers.

The utilization of solar energy to produce hydrogen from water is showing increased importance and desirability in the field of artificial photosynthesis to produce clean and sustainable fuels. In a typical three-component dye-sensitized semiconductor system for photocatalysis, the dye sensitizer plays an essential role of energy antenna for harvesting visible light and promoting the reduction reaction to generate hydrogen. In recent decades, a lot of attention has focused on metal-free organic sensitizers, which have the advantages of low cost, high molar extinction coefficient, good modifiability and, most importantly, ability to avoid the use of noble metal ions. This Review enumerates the design strategies, specific properties and photocatalytic performances of metal-free sensitizers in the past 30 years and concludes their evolution process. The advantages of different types of metal-free sensitizers are highlighted and the instructively enlightening experiences are systematic summarized.

Photocatalysts for H2 Generation from Starburst Triphenylamine/Carbazole Donor-Based Metal-Free Dyes and Porous Anatase TiO2 Cube.

A series of novel triphenylamine/carbazole-based D-D-π-π-A dyes DH1-4 and a mesoporous anatase cubic "microcage" TiO2 material (denoted as MC-TiO2 ) were synthesized and combined to obtain dye-sensitized photocatalysts (denoted as DHn/Pt/MC-TiO2 , n=1-4). These catalysts showed better performances in visible-light-driven H2 evolution from water than DHn/Pt/P25-TiO2 catalysts based on commercial P25-TiO2 bulk semiconductor under similar conditions. Compared with P25-TiO2 particles, the porous MC-TiO2 had a large Brunauer-Emmett-Teller surface area, porosity, and exposed {0 0 1} crystal plane, which greatly contributed to the photocatalytic activity. The optimized DH2/Pt/MC-TiO2 photocatalyst exhibited an attractive H2 production rate (16.28 mmol g-1 h-1 based on catalyst mass), and the optimized DH4/Pt/MC-TiO2 photocatalyst showed good stability [turnover number (TON) of 16 699 in 105 h based on dye number], which represents one of the best performances among all reported visible-light-driven heterogeneous catalytic systems. Compared with the other dyes in this series, the high H2 production rate of DH2 on Pt/MC-TiO2 can be attributed to its size-matching effect and thus high dye loading amount, whereas the high TON and durability of DH4/Pt/MC-TiO2 are probably related to the rapid regeneration kinetics of DH4.

Assembly of a 1D coordination polymer through in situ formation of a new ligand by double C-C coupling on CHCl3 under solvothermal conditions.

A rare in situ metal/ligand reaction has been observed during the assembly of a manganese-coordination polymer under solvothermal conditions, which leads to double C-C coupling on CHCl(3) involving cleavage of three C-Cl bonds and the formation of two new C-C bonds at the same carbon center.

Networked Cages for Enhanced CO2 Capture and Sensing.

It remains a great challenge to design and synthesize a porous material for CO2 capture and sensing simultaneously. Herein, strategy of "cage to frameworks" is demonstrated to synthesize fluorescent porous organic polymer (pTOC) by using tetraphenylethylene-based oxacalixarene cage (TOC) as the monomer. The networked cages (pTOC) have improved porous properties, including Brunauer-Emmett-Teller surface area and CO2 capture compared with its monomer TOC, because the polymerization overcomes the window-to-arene packing modes of cages and turns on their pores. Moreover, pTOC displays prominent reversible fluorescence enhancement in the presence of CO2 in different dispersion systems and fluorescence recovery for CO2 release in the presence of NH3·H2O, and is thus very effective to detect and quantify the fractions of CO2 in a gaseous mixtures.

A fluorescent calixarene-based dimeric capsule constructed via a MII-terpyridine interaction: cage structure, inclusion properties and drug release.

Two analogues of capsule-like fluorescent cages have been constructed by dimerization of terpyridine-containing calixarene derivatives utilizing a MII-terpyridine (M = Zn and Cd) interaction. 1H NMR spectral studies show that the self-assembled molecular capsules Zn4L12 and Cd4L12 have a highly symmetrical D 4h-structure. The encapsulation of the anticancer drug mercaptopurine in their cavities has been documented by NMR, ESI-TOF-MS, fluorescence switching, and molecular simulation, indicating that strong S-π and π-π interactions between drug and cage are of importance for the host-guest binding. The nanoscale cages exhibit excellent behaviors to control the release of mercaptopurine in phosphate buffered saline solution (pH = 7.4). These results further highlight the potential of self-assembled Zn4L12 cages for drug-carrier applications.