Acinetobacter baumannii reinforces the pathogenesis by promoting IL-17 production in a mouse pneumonia model.

Interleukin-17 (IL-17) is involved in host defense against bacterial infection. Little is known about the role of IL-17 in A. baumannii-infected pneumonia. Our objective was to investigate the role of IL-17 in pulmonary A. baumannii infection in a mouse model. We infected C57BL/6 mice intra-tracheally (i.t.) with A. baumannii to establish pneumonia model and found A. baumannii infection elevated IL-17 expression in lungs. IL-17-deficient (Il17-/-) mice were resistant to pulmonary A. baumannii infection, showing improved mice survival, reduced bacteria burdens, and alleviated lung inflammation. Further, treatment of A. baumannii-infected Il17-/- mice with IL-17 exacerbated the severity of pneumonia. These data suggest a pathogenic role of IL-17 in pulmonary A. baumannii infection. Further, the infiltration and phagocytic function of neutrophils in broncho-alveolar lavage fluid were detected by flow cytometry. The results showed that Il17-/- mice had increased neutrophil infiltration and enhanced phagocytosis in neutrophils at the early time of infection. Treatment of mice with IL-17 suppressed phagocytic function of neutrophils. All data suggest that IL-17 promotes susceptibility of mice to pulmonary A. baumannii infection by suppressing neutrophil phagocytosis at early time of infection. Targeting IL-17 might be a potential therapeutic strategy in controlling the outcome of A. baumannii pneumonia.

Fossil-Fuel and Food Systems Equally Dominate Anthropogenic Methane Emissions in China.

Understanding fossil-fuel/food production and consumption patterns is the first step toward reducing the climate impacts of associated methane (CH4) emissions but remains unclear in China. Here, based on the bottom-up method, whole-industrial-chain CH4 emission in China (CH4-CHINA) is developed to track CH4 emissions from production to use and finally to disposal. The estimated Chinese national CH4 emissions in 2020 are 39288.3 Gg (25,230.8-53,345.7 Gg), with 50.4 and 49.6% emissions generated from fossil-fuel and food systems, respectively. ∼130,000 point sources are included to achieve a highly resolved inventory of CH4 emissions, which account for ∼53.5% of the total anthropogenic CH4 emissions in 2020. Our estimate is 36% lower than the Chinese inventory reported to the UNFCCC and 40% lower than EDGAR v6.0, mainly driven by lower emissions from rice cultivation, waste management, and coal supply chain in this study. Based on the emission flow, we observe that previous studies ignored the emissions from natural gas vehicles and residential appliances, coke production, municipal solid waste predisposal, septic tanks, biogas digesters, and food sewage treatment, which totally contribute ∼12.4% of the national anthropogenic CH4 emissions. The results discussed in this study provide critical insights to design and formulate effective CH4 emission mitigation strategies.

Tracking Carbon Flows from Coal Mines to Electricity Users in China Using an Ensemble Model.

Accurately tracking carbon flows is crucial for preventing carbon leakage and allocating responsibility for reducing CO2eq emissions. In this study, we developed an ensemble model to effectively track carbon flows within China's power system. Our approach integrates coal quality tests, individual power plant datasets, a dynamic material-energy flow analysis model, and an extended version of an interconnected power grid model that incorporates transmission and distribution (T&D) losses. Our results not only provide accurate quantification of unit-based CO2eq emissions based on coal quality data but also enable the assessment of emissions attributed to T&D losses and emission shifts resulting from interprovincial coal and electricity trade. Remarkably, for CO2eq emissions from coal-fired units, the disparity between the guideline and our study can be as high as [-95%, 287%]. We identify Guangdong, Hebei, Jiangsu, and Zhejiang provinces as the major importers of both coal and electricity, responsible for transferring nearly half of their user-based emissions to coal and power bases. Significantly, T&D losses, often overlooked, contribute to 15-20% of provincial emissions at the user side. Our findings emphasize the necessity of up-to-date life cycle emissions and spatial carbon shifts in effectively allocating emission reduction responsibilities from the national level to provinces.

Tracking Carbon Flows in China's Iron and Steel Industry.

Accurately tracking carbon flows is the first step toward reducing the climate impacts of the iron and steel industry (ISI), which is still lacking in China. In this study, we track carbon flows from coal/mineral mines to end steel users by coupling the cross-process material and energy flow model, point-based emission inventory, and interprovincial trade matrices. In 2020, ISI emitted 2288 Tg of CO2 equivalent (CO2eq, including CH4 and CO2), 96% of which came from energy use and 4% from raw material decomposition. Often overlooked off-gas use and CH4 leakage in coal mines account for 25% of life-cycle emissions. Due to limited scrap resources and a high proportion of pig iron feed, the life-cycle emission intensity of the electric arc furnace (EAF) (1.15 t CO2eq/t steel) is slightly lower than the basic oxygen furnace (BOF) (1.58 t CO2eq/t steel) in China. In addition, over 49% of producer-based emissions are driven by interprovincial coal/coke/steel trade. In particular, nearly all user-based emissions in Zhejiang and Beijing are transferred to steelmaking bases. Therefore, we highlight the need for life-cycle and spatial shifts in user-side carbon management.

Facility-Level Emissions and Synergistic Control of Energy-Related Air Pollutants and Carbon Dioxide in China.

Boilers involve ∼60% of primary energy consumption in China and emit more air pollutants and CO2 than any other infrastructures. Here, we established a nationwide, facility-level emission data set considering over 185,000 active boilers in China by fusing multiple data sources and jointly using various technical means. The emission uncertainties and spatial allocations were significantly improved. We found that coal-fired power plant boilers were not the most emission-intensive boilers with regard to SO2, NOx, PM, and mercury but emitted the highest CO2. However, biomass- and municipal waste-fired combustion, regarded as zero-carbon technologies, emitted a large fraction of SO2, NOx, and PM. Future biomass or municipal waste mixing in coal-fired power plant boilers can make full use of the advantages of zero-carbon fuel and the pollution control devices of coal-fired power plants. We identified small-size boilers, medium-size boilers using circulating fluidized bed boilers, and large-size boilers located in China's coal mine bases as the main high emitters. Future focuses on high-emitter control can substantially mitigate the emissions of SO2 by 66%, NOx by 49%, PM by 90%, mercury by 51%, and CO2 by 46% at the most. Our study sheds light on other countries wishing to reduce their energy-related emissions and thus the related impacts on humans, ecosystems, and climates.

Air Pollutant Emissions from Residential Solid Fuel Combustion in the Pan-Third Pole Region.

As the largest emission source in the Pan-Third Pole region, residential solid fuel combustion gains increasing public concern regarding air pollution-associated health impacts. This study firstly developed emission inventories by combining energy statistics, fuel-mix survey, and detailed emission factors considering different fuel types, stove types, and altitudes, and we achieved full regional coverage and increased spatial resolution from 9 × 9 km to 1 km × 1 km. Total CO2, CO, PM2.5, SO2, and NOx emissions (coefficient of variation) were estimated to be 823 Mt (24%), 53 Mt (28%), 4525 kt (48%), 1388 kt (55%), and 1275 kt (46%) in 2020. India, Pakistan, and Bangladesh combined contributed 73, 57, 65, 67, and 69% of total CO2, CO, PM2.5, SO2, and NOx emissions, respectively, due to the large population. The Qinghai-Tibet Plateau had the second-highest emission intensity, mainly due to the high fuel consumption per capita. Unlike the emissions of the Pan-Third Pole in existing Asian inventories, dung cake combustion dominated total PM2.5, SO2, and NOx emissions rather than firewood combustion with proportions of 54, 70, and 67%, respectively. The effect of altitude on combustion efficiencies increased PM2.5 emissions by about 21% from the region. The method and results can provide technical guidance for emission inventory refinement in the Pan-Third Pole and other regions.

Elevated Gaseous Oxidized Mercury Revealed by a Newly Developed Speciated Atmospheric Mercury Monitoring System.

Gaseous oxidized mercury (Hg2+) monitoring is one of the largest challenges in the mercury research field, where existing methods cannot simultaneously satisfy the measurement requirements of both accuracy and time precision, especially in high-particulate environments. Here, we verified that dual-stage cation exchange membrane (CEM) sampler is incapable of gaseous elemental mercury (Hg0) uptake even if particulate matter is trapped on CEM, whereas the Hg2+ capture efficiency of the sampler is more than 90%. We then developed a Cation Exchange Membrane-Coupled Speciated Atmospheric Mercury Monitoring System (CSAMS) by coupling the dual-stage CEM sampler with the commercial Tekran 2537/1130/1135 system and configuring a new sampling and analysis procedure, so as to improve the monitoring accuracy of Hg2+ and ensure the simultaneous measurement of Hg0, Hg2+, and Hgp in 2 h time resolution. We deployed the CSAMS in urban Beijing in September 2021 and observed an unprecedented elevated Hg2+ during the daytime with an average amplitude of 510 pg m-3. Using a zero-dimensional box model, the elevated Hg2+ production rate was attributed to high atmospheric oxidant concentrations, Hg0 heterogeneous and interfacial oxidation processes on the surface of atmospheric particles, or potential unknown oxidants.

Improved atmospheric mercury simulation using updated gas-particle partition and organic aerosol concentrations.

The gaseous or particulate forms of divalent mercury (HgII) significantly impact the spatial distribution of atmospheric mercury concentration and deposition flux (FLX). In the new nested-grid GEOS-Chem model, we try to modify the HgII gas-particle partitioning relationship with synchronous and hourly observations at four sites in China. Observations of gaseous oxidized Hg (GOM), particulate-bound Hg (PBM), and PM2.5 were used to derive an empirical gas-particle partitioning coefficient as a function of temperature (T) and organic aerosol (OA) concentrations under different relative humidity (RH). Results showed that with increasing RH, the dominant process of HgII gas-particle partitioning changed from physical adsorption to chemical desorption. And the dominant factor of HgII gas-particle partitioning changed from T to OA concentrations. We thus improved the simulated OA concentration field by introducing intermediate-volatility and semi-volatile organic compounds (I/SVOCs) emission inventory into the model framework and refining the volatile distributions of I/SVOCs according to new filed tests in the recent literatures. Finally, normalized mean biases (NMBs) of monthly gaseous element mercury (GEM), GOM, PBM, WFLX were reduced from -33%-29%, 95%-300%, 64%-261%, 117%-122% to -13%-0%, -20%-80%, -31%-50%, -17%-23%. The improved model explains 69%-98% of the observed atmospheric Hg decrease during 2013-2020 and can serve as a useful tool to evaluate the effectiveness of the Minamata Convention on Mercury.

Effect of the Coal Preparation Process on Mercury Flows and Emissions in Coal Combustion Systems.

Coal preparation is effective in controlling primary mercury emissions in coal combustion systems; however, the combustion of coal preparation byproducts may cause secondary emissions. The inconsistent coal preparation statistics, unclear mercury distribution characteristics during coal preparation, and limited information regarding the byproduct utilization pathways lead to great uncertainty in the evaluation of the effect of coal preparation in China. This study elucidated the mercury distribution in coal preparation based on the activity levels of 2886 coal preparation plants, coal mercury content database, tested mercury distribution factors of typical plants, and then traced the mercury flows and emissions in the downstream sectors using a cross-industry mercury flow model. We found that coal preparation altered the mercury flows by reducing 68 tonnes of mercury to sectors such as coking and increasing the flows to byproduct utilization sectors. Combusting cleaned coal rather than raw coal reduced the mercury emissions by 47 tonnes; however, this was offset by secondary mercury emissions. Coal gangue spontaneous combustion and the cement kiln coprocessing process were dominant secondary emitters. Our results highlight the necessity of whole-process emission control of atmospheric mercury based on flow maps. Future comprehensive utilization of wastes in China should fully evaluate the potential secondary mercury emissions.

Highly Resolved Inventory of Mercury Release to Water from Anthropogenic Sources in China.

This study developed an up-to-date and point-source-based inventory of mercury (Hg) releases to water in China by applying probabilistic release factors that combined industry removal efficiencies, reuse of reclaimed water, and receiving water types. In 2017, the national mercury release to water was estimated to be 50 (35-66) tons, in which 47%, 8%, 7%, and 25% were from nonferrous metal smelting, vinyl chloride monomer (VCM) production, coal-fired boilers, and domestic sewage, respectively. Approximately 95% of mercury was released to inland rivers, and the rest was discharged to lakes or coastal water. The significant sources were identified based on their mercury releases to water. The control of mercury release to water in China shall focus on zinc smelting plants, municipal sewage treatment plants, and the VCM production process. For zinc smelting plants, China can tighten the limit of mercury concentration in discharged wastewater and combine Hg-catcher device in traditional integrated treatment. For municipal sewage treatment plants and the VCM production process, promoting processes of Hg-free production can reduce mercury inputs at the source. Our study provides insights for other parties to identify the relevant sources of mercury release to water and to conduct control measures, so as to promote the global convention implementation.

Significant but Spatiotemporal-Heterogeneous Health Risks Caused by Airborne Exposure to Multiple Toxic Trace Elements in China.

Airborne trace elements (TEs) pose a notable threat to human health due to their toxicity and carcinogenicity, whereas their exposures and associated health risks in China remain unclear. Here, we present the first nationwide assessment of spatiotemporal exposure to 11 TEs in China by coupling a bottom-up emission inventory with a modified CMAQ model capable of TE simulation. Associated health risks of 11 TEs are then evaluated using a set of risk assessment models. Our results show that the CMAQ model could reasonably reproduce the spatiotemporal variations of 11 TEs in China compared to observations. We find significant but spatiotemporal-heterogeneous cancer risks associated with high-level exposure of TEs in China. Gridded cell concentrations of hexavalent chromium, arsenic, and nickel in eastern and central China usually exceed China's air quality standard limits, resulting in significant cancer risks that affected over 85% of the entire population in China in 2015. National annual mean population-weighted concentrations of 11 TEs decrease by 9.8-35.6% from 2012 to 2015, largely attributed to emission reduction from coal combustion. Our study provides critical insights for policymakers to implement stricter measures to alleviate health burdens and benefit relevant epidemiological research on airborne TEs.

Promoting SO2 Resistance of a CeO2(5)-WO3(9)/TiO2 Catalyst for Hg0 Oxidation via Adjusting the Basicity and Acidity Sites Using a CuO Doping Method.

The competition between SO2 and elemental mercury (Hg0) for active sites was an important factor for suppressing the Hg0 oxidation properties of catalysts. There were obvious differences in properties of basicity and acidity between SO2 and Hg0. Raising the SO2 resistance via adjusting the basicity and acidity sites of catalysts was promising for reducing the competition between SO2 and Hg0. This study aimed to form multiple active sites with different basicities via Cu, Fe, Mn, and Sn doping. The results indicated that Cu doping had the best modification performance. Five percent CuO doping could significantly improve the SO2 resistance of CuO(5)-CeO2(5)-WO3(9)/TiO2 and increase the mercury oxidation efficiency (MOE) from 54.7 to 85.5% in the condition (6% O2, 100 ppm NO, 100 ppm NH3, and 100 ppm SO2). CO2 temperature-programmed desorption analysis showed that CuO(5)-CeO2(5)-WO3(9)/TiO2 exhibited weak basic sites (CeO2), medium-strong basic sites (Cu-O-Ce), and strong basic sites (CuO). Therefore, the CuO in the Ce-O-Cu structure was prioritized for the reaction with acid gas SO2 and protected CeO2 from SO2 poisoning. This study prepared a highly SO2-resistant catalyst for Hg0 oxidation. This research and development will be conducive for use in Hg0 oxidation in actual coal-fired flue gases.

Measure-Specific Effectiveness of Air Pollution Control on China's Atmospheric Mercury Concentration and Deposition during 2013-2017.

China took aggressive air pollution control measures from 2013 to 2017, leading to the mitigation of atmospheric mercury pollution as a cobenefit. This study is the first to systematically evaluate the effect of five major air pollution control measures in reducing mercury emissions, the total gaseous mercury (TGM) concentration and mercury deposition flux (FLX) for unit emissions reduction. From 2013 to 2017, China's mercury emissions decreased from 571 to 444 tons, resulting in a 0.29 ng m-3 decrease in the TGM concentration, on average, and in a 17 µg m-2 yr-1 decrease in FLX. Ultralow emission renovations of coal-fired power plants are identified as the most effective emission abatement measure. As a result of this successful measure, coal-fired power plants are no longer the main mercury emitters. In 2017, the cement clinker sector became the largest emitter due to the use of less effective mercury removal measures. However, in terms of the mitigated TGM concentration and FLX levels per unit emission abatement, newly built wet flue gas desulfurization (WFGD) systems in coal-fired industrial boilers have become particularly effective in decreasing FLX levels. Therefore, to effectively reduce atmospheric mercury pollution in China, prioritizing mercury emissions control of cement clinkers and coal-fired industrial boilers is recommended.

A Review on Adsorption Technologies for Mercury Emission Control.

This study summarized existing adsorption technologies for the removal of elemental mercury in the flue gas. Both carriers (e.g., active carbon (AC), pyrolyzed char, inorganic adsorbents and fly ash) and various modification methods (pore structure improvement, oxygen-containing functional groups addition and new active reagents impregnation) were compared to shed light on the development of future adsorption technology. AC and char possibly performed more mercury adsorption capacity (MAC) compared with fly ash and inorganic adsorbents since carbon atom existence was easier to form the active halogen groups (C-X) and oxygen containing groups. Though both pore structure improvement and chemical group formation improved the MAC of adsorbents, the chemical modification methods (oxygen-containing functional groups addition and new active reagents impregnation) were more effective. The impregnation of halogen, sulfur and metal chloride could distinctly form lots of active sites on the adsorbents and developed high effective mercury adsorbents. In the future, the adsorption researches possibly focus on SO2 and H2O resistance of adsorbents, separable adsorbents, low-cost chemical modification methods, and utilization potential of fly ash.

Mitigation Options of Atmospheric Hg Emissions in China.

As the Minamata Convention on Mercury comes into effect, controlling atmospheric mercury (Hg) emissions has become a compulsory goal. This study determined the mitigation options for the five Convention specified sources by considering their reduction potential of Hg emissions and the impact of future technology changes on emitted Hg forms and cross-media releases. Hg emissions will be reduced from 371 t in 2015 to 242 t in 2020 mainly by applying multipollutant control measures. Hg emissions will be reduced to 71 t in 2030 mainly with alternative measures and specific Hg removal measures (SMR). Alternative measures are effective for the studied sources except waste incineration (WI). SMR is preferentially recommended in cement clinker production due to the benefit of sectoral emissions and local deposition. Stringent requirements of Hg emission control will promote the use of SMR in WI. In case of nonferrous metal smelting (NFMS), only 8.7 t of Hg emissions will be reduced by SMR. However, the cobenefit of Hg reduction in sulfuric acid and local deposition will increase the relevance. On the contrary, applying SMR in coal-fired power plants (CFPPs) and coal-fired industrial boilers (CFIBs) requires comprehensive evaluation in terms of cost benefit and cross-media effect.

Emission-Limit-Oriented Strategy To Control Atmospheric Mercury Emissions in Coal-Fired Power Plants toward the Implementation of the Minamata Convention.

Emission limit is a significant index of pollution control in most countries. However, the determination of a reasonable limit value and corresponding supported technical paths is always a challenge during the implementation procedure. In this study, we developed an emission-limit-oriented strategy which links the emission limit with reduction amount via technical paths, so as to control the Hg emissions in the coal-fired power plants in China. Results indicate that tightening the emission limit does not always guarantee the reduction of Hg amounts, especially when coal consumptions keep increasing during the economic growth period. By comprehensively considering the feasibility of different technical paths, the emission limit of 5 µg/m3 is recommended to be executed in 2025. Under the guidance of this limit, the reduction amount of emitted Hg will reach as large as 63 t during 2015-2025 by primarily using multipollutant control measures. During 2025-2030, both alternative energy measures and specific Hg removal measures will be applied to achieve the emission limit of 1 µg/m3 in 2030. The assessment method developed in this study can be used to establish the emission-limit-oriented control strategies in other countries or industries, which will assist the success of the Minamata Convention on Mercury.

A Highly Resolved Mercury Emission Inventory of Chinese Coal-Fired Power Plants.

As the largest coal consumer in China, the coal-fired power plants have come under increasing public concern in regard to atmospheric mercury pollution. This study developed an up-to-date and high-resolution mercury emission inventory of Chinese coal-fired power plants using a unit-based method that combined data from individual power plants, provincial coal characteristics, and industry removal efficiencies. National mercury emissions in 2015 were estimated at 73 tons, including 54 tons of elemental mercury, 18 tons of gaseous oxidized mercury and 1 ton of particle-bound mercury. Pulverized coal boilers emitted 65 tons, mainly in the coastal provinces and coal-electricity bases. Circulating fluidized bed boilers emitted 8 tons, mainly in Inner Mongolia and Shanxi Province. The average mercury emission intensity over the Chinese mainland was 18.3 g/GWh, which was similar to the limit for low-rank coal-fired units in the United States. The overall uncertainty of national mercury emission was estimated to be -19% to 20%, with the mercury content in coal being the major contributor. In most provinces, monthly mercury emissions generally peaked in December and August. However, monthly partition coefficients of southwest China were obviously lower than other regions from June to October due to the high proportion of hydropower generation.

Improving Flue Gas Mercury Removal in Waste Incinerators by Optimization of Carbon Injection Rate.

This study tested the mercury emission characteristics of six municipal solid waste incinerators (MSWIs) and recommended future mercury control via adjusting operational parameters. The results indicated that over 99% of the mercury in solid wastes ended in fly ash and flue gas, of which 3.3-66.3% was emitted to air through stack gas. Mercury in the stack gas was mainly in the form of oxidized mercury (Hg2+), the proportion (65.4-89.0%) of which was far higher than previous estimation (15%). Mercury removal efficiencies (MRE) of the tested incinerators were in the range of 33.6-95.2%. The impact of waste incineration capacity, gas flow, fly ash yield, and activated carbon (AC) injection on MRE were analyzed. We found that the MRE was significantly linearly correlated to the ratio of AC injection and fly ash yield (correlation coefficient = 0.98, significance <0.01). AC injection value is determined based on the control of dioxin emissions without considering mercury control in traditional design. To increase MRE of MSWIs, the AC injection should increase from around 100 mg·Nm-3 to 135 mg·Nm-3 for grate furnace combustor and 170 mg·Nm-3 for circulation fluidized bed combustor, so as to reach a MRE of 90%.

Molecular imaging of fibrosis using a novel collagen-binding peptide labelled with 99mTc on SPECT/CT.

Fibrosis, closely related to chronic various diseases, is a pathological process characterised by the accumulation of collagen (largely collagen type I). Non-invasive methods are necessary for the diagnosis and follow-up of fibrosis. This study aimed to develop a collagen-targeted probe for the molecular imaging of fibrosis. We identified CPKESCNLFVLKD (CBP1495) as an original collagen-binding peptide using isothermal titration calorimetry and enzyme-linked immunosorbent assay. CBP1495 effectively bound to collagen type I (K d = 861 nM) and (GPO)9 (K d = 633 nM), a collagen mimetic peptide. Western blot and histochemistry validated CBP1495 targeting collagen in vitro and ex vivo. (Gly-(D)-Ala-Gly-Gly) was introduced to CBP1495 for coupling 99mTc. Labelling efficiency of 99mTc-CBP1495 was 95.06 ± 1.08 %. The physico-chemical properties, tracer kinetics and biodistribution of 99mTc-CBP1495 were carried out, and showed that the peptide stably chelated 99mTc in vitro and in vivo. SPECT/CT imaging with 99mTc-CBP1495 was performed in rat fibrosis models, and revealed that 99mTc-CBP1495 significantly accumulated in fibrotic lungs or livers of rats. Finally, 99mTc-CBP1495 uptake and hydroxyproline (Hyp), a specific amino acid of collagen, were quantitatively analysed. The results demonstrated that 99mTc-CBP1495 uptake was positvely correlated with Hyp content in lungs (P < 0.0001, r 2 = 0.8266) or livers (P < 0.0001, r 2 = 0.7581). Therefore, CBP1495 is a novel collagen-binding peptide, and 99mTc-labelled CBP1495 may be a promising radiotracer for the molecular imaging of fibrosis.

Temporal Trend and Spatial Distribution of Speciated Atmospheric Mercury Emissions in China During 1978-2014.

Mercury pollution control has become a global goal. The accurate estimate of long-term mercury emissions in China is critical to evaluate the global mercury budget and the emission reduction potentials. In this study, we used a technology-based approach to compile a consistent series of China's atmospheric mercury emissions at provincial level from 1978 to 2014. China totally emitted 13 294 t of anthropogenic mercury to air during 1978-2014, in which gaseous elemental mercury, gaseous oxidized mercury, and particulate-bound mercury accounted for 58.2%, 37.1%, and 4.7%, respectively. The mercury removed during this period were 2085 t in coal-fired power plants (counting 49% of mercury input), 7259 t in Zn smelting (79%), 771 t in coal-fired industrial boilers (25%), and 658 t in cement production plants (27%), respectively. Annual mercury emissions increased from 147 t in 1978 to 530 t in 2014. Both sectoral and spatial emissions of atmospheric mercury experienced significant changes. The largest mercury emission source evolved from coal-fired industrial boilers before 1998, to zinc smelting during 1999-2004, coal-fired power plants during 2005-2008, finally to cement production after 2009. Coal-fired industrial boilers and cement production have become critical hotpots for China's mercury pollution control.