Functional Lignin Building Blocks: Reactive Vinyl Esters with Acrylic Acid.

Introducing vinyl groups onto the backbone of technical lignin provides an opportunity to create highly reactive renewable polymers suitable for radical polymerization. In this work, the chemical modification of softwood kraft lignin was pursued with etherification, followed by direct esterification with acrylic acid (AA). In the first step, phenolic hydroxyl and carboxylic acid groups were derivatized into aliphatic hydroxyl groups using ethylene carbonate and an alkaline catalyst. The lignin was subsequently fractionated using a downward precipitation method to recover lignin of defined molar mass and solubility. After recovery, the resulting material was then esterified with AA, resulting in lignin with vinyl functional groups. The first step resulted in approximately 90% of phenolic hydroxyl groups being converted into aliphatic hydroxyls, while the downward fractionation resulted in three samples of lignin with defined molar masses. For the esterification reaction, the weight ratio of reagents, reaction temperature, and reaction time were evaluated as factors that would influence the modification efficacy. 13C NMR spectroscopy analysis of lignin samples before and after esterification showed that the optimized reaction conditions could reach approximately 40% substitution of aliphatic hydroxyl groups. Both steps only used lignin and the modifying reagent (no solvent), with the possibility of recovery and reuse of the reagent by dilution and distillation. An additional second esterification step of the resulting lignin sample with acetic acid or propionic acid converted 90% of remaining hydroxyl groups into short-chain carbon aliphatic esters, making a hydrophobic material suitable for further copolymerization with synthetic hydrophobic monomers.

Revisiting the Molar Mass and Conformation of Derivatized Fractionated Softwood Kraft Lignin.

The limited utilization of reliable tools and standards for determination of the softwood kraft lignin molar mass and the corresponding molecular conformation hampers elucidation of the structure-property relationships of lignin. At issue, conventional size exclusion chromatography (SEC) is unable to robustly measure the molar mass because of a lack of calibration standards with a similar structure to lignin. In the present work, the determination of the absolute molar mass of acetylated technical lignin was revisited utilizing SEC combined with multi-angle light scattering with a band pass filter to suppress the fluorescence. Fractionated lignin isolated using sequential techniques of solvent and membrane methods was used to enhance the clarity of light-scattering profiles by narrowing the molar mass distribution of lignin fractions. Further information on the molecular conformation of derivatized samples was studied utilizing a differential viscometer, and chemical structures were identified by NMR spectroscopy analysis. Through the help of fractionation, intrinsic viscosity values were determined for the different fractions as a function of molecular weight cut-off membranes. The derivatized acetone-soluble lignin was found to possess a lower molecular weight and an extremely compact structure relative to the derivatized acetone-insoluble fraction based on a significantly lower "α" value in the Mark-Houwink-Sakurada plot (0.15 acetone-soluble vs 0.33 acetone-insoluble). The differences in geometry were supported by the linkage analysis from NMR showing the acetone-soluble part containing fewer native linkages. In both of these examples, kraft lignin behaved like a solid sphere, limiting the ability to provide entanglements between molecular chains. From this standpoint, macroscopic properties of lignin are justified with this knowledge of a dense and extremely compact structure.

Interpenetrated Three-Dimensional Copper-Iodine Cluster-Based Framework with Enantiopure Porphyrin-like Templates.

Presented here is an interpenetrated three-dimensional copper-iodine cluster-based framework with dia topology based on two different kinds of Cu4I4 subunits that is templated by an enantiopure porphyrin-like Cu(I)(5-eatz)2 unit and shows excellent photocatalytic activity to degrade methylene blue under visible light.

Solventless Amination of Lignin and Natural Phenolics using 2-Oxazolidinone.

Reactive amine compounds are critical for a vast array of useful chemicals in society, yet a limited number of them are derived from renewable resources. This study developed an efficient route to obtain aminated building blocks from phenolic resources derived from nature, such as lignin and tannic acid, for enhancing their utility in applications such as epoxy resins, nylons, polyurethanes, and other polymeric materials. The reaction utilized a carbon storage compound, 2-oxazolidinone as a solvent and as a reagent circumventing the need of hazardous chemistry of conventional amination routes such as those involving formaldehyde. Both free acids and hindered phenolics were readily converted into aminoethyl derivatives resulting in aromatics with primary amine functionality. The aminated compounds, with the potential for enhanced reactivity, can pave the way toward more advanced renewable building blocks.

Validation of a Computerized Cognitive Training Tool to Assess Cognitive Impairment and Enable Differentiation Between Mild Cognitive Impairment and Dementia.

BACKGROUND: Age-related cognitive decline is a chronic, progressive process that requires active clinical management as cognitive status changes. Computerized cognitive training (CCT) provides cognitive exercises targeting specific cognitive domains delivered by computer or tablet. Meanwhile, CCT can be used to regularly monitor the cognitive status of patients, but it is not clear whether CCT can reliably assess cognitive ability or be used to diagnose different stages of cognitive impairment. OBJECTIVE: To investigate whether CCT can accurately monitor the cognitive status of patients with cognitive impairment as well as distinguish patients with dementia from patients with mild cognitive impairment (MCI). METHOD: We included 116 patients (42 dementia and 74 MCI) in final analysis. Cognitive ability was assessed by averaging the patient performance on the CCT to determine the Cognitive Index. The validity of the Cognitive Index was evaluated by its correlation with neuropsychological tests, and internal consistency was measured to assess the reliability. Additionally, we determined the diagnostic ability of the Cognitive Index to detect dementia using receiver operating characteristic (ROC) analysis. RESULTS: The Cognitive Index was highly correlated with the Montreal Cognitive Assessment (r = 0.812) and the Mini-Mental State Examination (r = 0.694), indicating good convergent validity, and the Cronbach's alpha coefficient was 0.936, indicating excellent internal consistency. The area under the ROC curve, sensitivity, and specificity of the Cognitive Index to diagnose dementia were 0.943, 83.3%, and 91.9%, respectively. CONCLUSIONS: CCT can be used to assess cognitive status and detect dementia in patients with cognitive impairment.

Mechanically recyclable melt-spun fibers from lignin esters and iron oxide nanoparticles: towards circular lignin materials.

The inferior thermoplastic properties have limited production of melt-spun fibers from lignin. Here we report on the controlled esterification of softwood kraft lignin (SKL) to enable scalable, solvent-free melt spinning of microfibers using a cotton candy machine. We found that it is crucial to control the esterification process as melt-spun fibers could be produced from lignin oleate and lignin stearate precursors with degrees of esterification (DE) ranging from 20-50%, but not outside this range. To fabricate a functional hybrid material, we incorporated magnetite nanoparticles (MNPs) into the lignin oleate fibers by melt blending and subsequent melt spinning. Thermogravimetric analysis and X-ray diffraction studies revealed that increasing the weight fraction of MNPs led to improved thermal stability of the fibers. Finally, we demonstrated adsorption of organic dyes, magnetic recovery, and recycling via melt spinning of the regular and magnetic fibers with 95% and 83% retention of the respective adsorption capacities over three adsorption cycles. The mechanical recyclability of the microfibers represents a new paradigm in lignin-based circular materials.

Discovery of lignin-transforming bacteria and enzymes in thermophilic environments using stable isotope probing.

Characterizing microorganisms and enzymes involved in lignin biodegradation in thermal ecosystems can identify thermostable biocatalysts. We integrated stable isotope probing (SIP), genome-resolved metagenomics, and enzyme characterization to investigate the degradation of high-molecular weight, 13C-ring-labeled synthetic lignin by microbial communities from moderately thermophilic hot spring sediment (52 °C) and a woody "hog fuel" pile (53 and 62 °C zones). 13C-Lignin degradation was monitored using IR-GCMS of 13CO2, and isotopic enrichment of DNA was measured with UHLPC-MS/MS. Assembly of 42 metagenomic libraries (72 Gb) yielded 344 contig bins, from which 125 draft genomes were produced. Fourteen genomes were significantly enriched with 13C from lignin, including genomes of Actinomycetes (Thermoleophilaceae, Solirubrobacteraceae, Rubrobacter sp.), Firmicutes (Kyrpidia sp., Alicyclobacillus sp.) and Gammaproteobacteria (Steroidobacteraceae). We employed multiple approaches to screen genomes for genes encoding putative ligninases and pathways for aromatic compound degradation. Our analysis identified several novel laccase-like multi-copper oxidase (LMCO) genes in 13C-enriched genomes. One of these LMCOs was heterologously expressed and shown to oxidize lignin model compounds and minimally transformed lignin. This study elucidated bacterial lignin depolymerization and mineralization in thermal ecosystems, establishing new possibilities for the efficient valorization of lignin at elevated temperature.

Analysis of Structure and Antioxidant Activity of Polysaccharides from Aralia continentalis.

We extracted, purified, and characterized three neutral and three acidic polysaccharides from the roots, stems, and leaves of Aralia continentalis Kitigawa. The results of the analysis of monosaccharide composition indicated that the polysaccharides from the roots and stems were more similar to each other than they were to the polysaccharides from the leaves. The in vitro antioxidant results demonstrated that the acidic polysaccharides had stronger antioxidant activity than the neutral fractions. Therefore, we investigated the primary purified acidic polysaccharide fractions (WACP(R)-A-c, WACP(S)-A-c, and WACP(L)-A-d) by NMR and enzymatic analysis. The structural analytical results indicated that WACP(R)-A-c contained homogalacturonan (HG); WACP(S)-A-c contained HG and rhamnogalacturonan II (RG-II), and WACP(L)-A-d contained HG, RG-II, and rhamnogalacturonan I (RG-I) domains. Our findings offer insights into the screening of natural polysaccharide-based antioxidants and provide a theoretical basis for the application of A. continentalis.

Tailoring renewable materials via plant biotechnology.

Plants inherently display a rich diversity in cell wall chemistry, as they synthesize an array of polysaccharides along with lignin, a polyphenolic that can vary dramatically in subunit composition and interunit linkage complexity. These same cell wall chemical constituents play essential roles in our society, having been isolated by a variety of evolving industrial processes and employed in the production of an array of commodity products to which humans are reliant. However, these polymers are inherently synthesized and intricately packaged into complex structures that facilitate plant survival and adaptation to local biogeoclimatic regions and stresses, not for ease of deconstruction and commercial product development. Herein, we describe evolving techniques and strategies for altering the metabolic pathways related to plant cell wall biosynthesis, and highlight the resulting impact on chemistry, architecture, and polymer interactions. Furthermore, this review illustrates how these unique targeted cell wall modifications could significantly extend the number, diversity, and value of products generated in existing and emerging biorefineries. These modifications can further target the ability for processing of engineered wood into advanced high performance materials. In doing so, we attempt to illuminate the complex connection on how polymer chemistry and structure can be tailored to advance renewable material applications, using all the chemical constituents of plant-derived biopolymers, including pectins, hemicelluloses, cellulose, and lignins.

Genomics and metatranscriptomics of biogeochemical cycling and degradation of lignin-derived aromatic compounds in thermal swamp sediment.

Thermal swamps are unique ecosystems where geothermally warmed waters mix with decomposing woody biomass, hosting novel biogeochemical-cycling and lignin-degrading microbial consortia. Assembly of shotgun metagenome libraries resolved 351 distinct genomes from hot-spring (30-45 °C) and mesophilic (17 °C) sediments. Annotation of 39 refined draft genomes revealed metabolism consistent with oligotrophy, including pathways for degradation of aromatic compounds, such as syringate, vanillate, p-hydroxybenzoate, and phenol. Thermotolerant Burkholderiales, including Rubrivivax ssp., were implicated in diverse biogeochemical and aromatic transformations, highlighting their broad metabolic capacity. Lignin catabolism was further investigated using metatranscriptomics of sediment incubated with milled or Kraft lignin at 45 °C. Aromatic compounds were depleted from lignin-amended sediment over 148 h. The metatranscriptomic data revealed upregulation of des/lig genes predicted to specify the catabolism of syringate, vanillate, and phenolic oligomers in the sphingomonads Altererythrobacter ssp. and Novosphingobium ssp., as well as in the Burkholderiales genus, Rubrivivax. This study demonstrates how temperature structures biogeochemical cycling populations in a unique ecosystem, and combines community-level metagenomics with targeted metatranscriptomics to identify pathways with potential for bio-refinement of lignin-derived aromatic compounds. In addition, the diverse aromatic catabolic pathways of Altererythrobacter ssp. may serve as a source of thermotolerant enzymes for lignin valorization.

n-p Heterojunction of TiO2-NiO core-shell structure for efficient hydrogen generation and lignin photoreforming.

Hydrogen evolution from biomass photoreforming has been widely recognized as a promising strategy for relieving the pressure from energy crisis and environmental pollution, as it could generate sustainable H2 and value-added bioproducts simultaneously. Combining p-type semiconductors with n-type semiconductors to form n-p heterojunction is an effective strategy to improve the photocatalytic quantum efficiency by enhancing the separation of photogenerated electrons and holes, which could greatly facilitate the realization of such biomass photorefinery concept. However, the incompact contact between the n-type and p-type semiconductors often induces the aggregation of photogenerated electrons and holes. In this work, we design and synthesize an ultrafine n-p heterojunction TiO2-NiO core-shell structure to overcome the incompact contact in the n-p interface. When the n-p heterojunction photocatalysts are evaluated for photocatalytic water splitting and biomass lignin photoreforming respectively, the as-fabricated TiO2-NiO nanocomposite with 3.25% NiO demonstrates the highest hydrogen generation of 23.5 mmol h-1 g-1 from water splitting and H2 (0.45 mmol h-1 g-1) and CH4 (0.03 mmol h-1 g-1) cogeneration with reasonable amount of fatty acids (palmitic acid and stearic acid) production from lignin photoreforming. The excellent photocatalytic activity is ascribed to the synergistic effects of high crystallinity of TiO2 ultrafine nanoparticles, core-shell structure and n-p heterojunction with NiO nanoclusters. This present work demonstrates a simple and efficient method to fabricate ultrafine n-p heterojunction core-shell structure for noble-metal free catalyst for both water splitting and biomass photoreforming.

Data on making uniform lignin building blocks via in-situ real-time monitoring of hydroxyethyl modification.

In this work, a lab-designed apparatus was developed to collect and record the CO2 amount during the hydroxyethyl modification of lignin. We presented the CO2 volume amount and the production rate under different reaction conditions (80 - 120 °C and 2 - 6 hrs). Nuclear magnetic resonance spectroscopy was performed to analyze the chemical structure of the hydroxyethyl lignin corresponding with different amounts of CO2 that evolved during the reaction. The aliphatic hydroxyl, aromatic hydroxyl, and carboxylic acid groups were analyzed and tabulated. The acetylated hydroxyethyl lignin samples were characterized by 13C NMR to obtain the aliphatic hydroxyl (primary and secondary), phenol (ortho substituted and ortho-free), hydroxyethyl, methoxy, and aromatic hydrogen groups semi-quantitatively. Fourier-transform infrared (FTIR) spectroscopy was adopted to analyze the surface functional groups including alkyl aryl ether bond, carboxylic acid groups, and aromatic hydroxyl groups. Gel permeation chromatography combined with a multi-angle light scattering detector and differential refractive index detector were used to obtain the molar mass of lignin before and after the modification.

[Localization of Soil Wind Erosion Dust Emission Factor in Beijing].

Soil wind erosion dust is one of the primary sources of fine particulate matter (PM2.5). Compared with the fugitive dust emission inventory of typical domestic provinces and cities, we found that the maximum among the contribution rates of soil wind erosion dust to the local total fugitive dust PM2.5 emission inventory was about 4 orders of magnitude higher than the minimum. This study provided a wind erosion equation and a determination method of parameter values. The remote sensing interpretation, China soil dataset, and meteorological data of each district in Beijing were used to achieve the spatial distribution of the vegetation coverage factor (V), soil erodibility index (I), and climatic factors (C) in the plain area of Beijing. This study also estimated the emission factor of soil wind erosion dust and its spatial distribution. The main conclusions are as follows: ① Taking 2017 and Beijing city as an example, it was found that the climatic factor (C) was underestimated to different extents by domestic scholars, and PM2.5 emission factors were overestimated or underestimated. ② V, I, and C showed apparent spatial differences and the average values of them were 0.63±0.09, 188±73, and 0.029±0.009, respectively. The maximum values of V, I, and C were 1.5, 2.1, and 4.5 times the minimum among all districts, respectively. ③ The PM2.5 emission factor of soil wind erosion dust in Beijing showed a high spatial distribution in the northwest and southeast. The average emission factor of the city was (0.0018±0.0008) t·(hm2·a)-1, which is 0.54 times the highest emission factor (Xicheng District) and 3.12 times the lowest (Pinggu District). The area proportions of standardized emission factors with higher intensity (0.6 to 0.8] and high intensity (0.8 to 1.0] was 0.72% and 0.04%, respectively.

Enhancing Enzyme-Mediated Cellulose Hydrolysis by Incorporating Acid Groups Onto the Lignin During Biomass Pretreatment.

Lignin is known to limit the enzyme-mediated hydrolysis of biomass by both restricting substrate swelling and binding to the enzymes. Pretreated mechanical pulp (MP) made from Aspen wood chips was incubated with either 16% sodium sulfite or 32% sodium percarbonate to incorporate similar amounts of sulfonic and carboxylic acid groups onto the lignin (60 mmol/kg substrate) present in the pulp without resulting in significant delignification. When Simon's stain was used to assess potential enzyme accessibility to the cellulose, it was apparent that both post-treatments enhanced accessibility and cellulose hydrolysis. To further elucidate how acid group addition might influence potential enzyme binding to lignin, Protease Treated Lignin (PTL) was isolated from the original and modified mechanical pulps and added to a cellulose rich, delignified Kraft pulp. As anticipated, the PTLs from both the oxidized and sulfonated substrates proved less inhibitory and adsorbed less enzymes than did the PTL derived from the original pulp. Subsequent analyses indicated that both the sulfonated and oxidized lignin samples contained less phenolic hydroxyl groups, resulting in enhanced hydrophilicity and a more negative charge which decreased the non-productive binding of the cellulase enzymes to the lignin.

Alkaline sulfonation and thermomechanical pulping pretreatment of softwood chips and pellets to enhance enzymatic hydrolysis.

To assess the impact of alkalinity on sulfonation and the enzyme-mediated hydrolysis of softwood cellulose, Lodgepole pine chips were impregnated with 8% sodium sulfite and increasing loadings of sodium carbonate before thermomechanical pulping. It was apparent that alkali addition enhanced lignin sulfonation with an additional 4% loading of sodium carbonate proving optimal. TEM indicated that sulfonation predominantly occurred within the secondary-cell-wall lignin, increasing cellulose accessibility to the cellulase enzymes. Although increasing alkalinity did not significantly enhance lignin sulfonation, likely due to the lower acetyl content of the softwood chips, it increases mannan solubilization. Despite their smaller particle size, softwood pellets were more poorly sulfonated, probably due to their higher lignin content and lower amount of acid groups. This more condensed lignin structure was confirmed by 2D-NMR and GPC analyses which indicated that the EMAL derived from softwood pellets contained less native ß-O-4 linkages and had a higher molecular weight.

Aqueous Dispersions of Esterified Lignin Particles for Hydrophobic Coatings.

An aqueous biopolymer dispersion coating system was synthesized utilizing softwood kraft lignin and a long chain organic acid. The chemical treatment of lignin was a two-step procedure, which first consisted of hydroxyethylation of the phenolic groups on lignin utilizing ethylene carbonate and an alkaline catalyst. This first step resulted in the lignin containing more than 80% aliphatic hydroxyl functionality (1H NMR). Following this step, oleic acid was reacted with hydoxyethyl lignin in order to form ester derivatives. With nearly a total reduction in absorbance in the hydroxyl stretching region, FT-IR analysis showed the majority of the hydroxyl groups was esterified forming an ethyl oleate derivative. Semi-quantitative 13C NMR analysis of the lignin revealed 88% substitution of the lignin hydroxyl groups. This derivative was soluble in organic solvent such as toluene and tetrahydrofuran. Solutions of lignin derivatives were slowly precipitated through dialysis, resulting in a stable dispersion of lignin microparticles in distilled water. The 1-2 µm average diameter size of the precipitated particles was found with dynamic light scattering of the suspensions. Spray and spin coating were used to apply the lignin derivative dispersion to different surfaces. For both coating methods, the lignin-based particles enhanced the hydrophobicity of all the substrates tested, resulting in increased water contact angles for glass, kraft pulp sheets and solid wood. Benign reagents involved in the coating synthesis utilized natural compounds that are known to repel water in nature. Combined with the avoidance of volatile organic solvents during application, this process provided a low environmental footprint solution for synthesis of hydrophobic coatings.

[Comparison of mechanical properties of three machinable resin ceramic composite materials].

PURPOSE: This in vitro study was to compare the flexural properties, fracture toughness and hardness of three machinable composite materials. METHODS: Three kinds of resin composite ceramic Upcera Hyramic, 3M Lava Ultimate, Vita Enamic and a glass ceramic Vitablocs Mark II were chosen for the study. Bar-shaped specimens (16 mm×4 mm×1 mm, 2 mm) were prepared for flexural strength experiment; specimens (17 mm×4 mm×3 mm) were prepared for fracture toughness experiment and specimens of 4 mm thickness were prepared for hardness test. Flexural test and fracture toughness experiment were performed with an universal testing machine at a cross-head speed of 0.5 mm/min. Hardness test was performed with an micro hardness tester.Scanning electron microscope was used to observe the roughness of fracture surface. One-way variance analysis was used to determine the statistical differences with SPSS 17.0 software package. RESULTS: The mean flexural strength of the tested blocks at 1 mm thickness was Hyramic（207.7515±13.12）MPa＞Vita Enamic（182.0286±15.18）MPa＞Lava Ultimate（145.8469±8.98）MPa＞Vitablocs MarkⅡ（103.0542±18.19）MPa. The mean flexural modulus were Vitablocs MarkⅡ（49.49±5.50）GPa＞Vita Enamic（40.65±3.80）GPa＞Hyramic（14.89±2.38）GPa＞Lava Ultimate（7.09±1.24）GPa. The mean flexural strength of the tested blocks at 2 mm thickness was Hyramic（208.1986±25.07）MPa＞Lava Ultimate（172.9297±12.73）MPa＞Vitablocs MarkⅡ（158.6587±15.37） MPa＞Vita Enamic（155.3670±13.77）MPa. The mean flexural modulus were Vitablocs MarkⅡ（24.07±1.86）GPa＞Vita Enamic（19.64±0.98）GPa＞Hyramic（10.35±0.87）GPa＞Lava Ultimate（8.68±0.86）GPa. The mean fracture toughness was Vita Enamic（1.6357±0.16）MPa·m1/2＞Lava Ultimate（1.4286±0.11）MPa·m1/2>Vitablocs MarkII（1.3233±0.10）MPa·m1/2>Hyramic（1.0614±0.09）MPa·m1/2. The hardness of the experimental group was significantly lower than that of the control group. CONCLUSIONS: According to ISO 6872/2008, three kinds of machinable resin ceramic composites meet the needs of clinical strength.Hyramic showed higher flexural strength at different thickness, it is an ideal material for dental restoration. Vita Enamic has not only higher flexural strength at the thickness of 1 mm, but also good toughness, it is suitable for repair of patients that have limited occlusal space and great bite force, named occlusal veneer.

Acid and Base Resistant Zirconium Polyphenolate-Metalloporphyrin Scaffolds for Efficient CO2 Photoreduction.

A series of zirconium polyphenolate-decorated-(metallo)porphyrin metal-organic frameworks (MOFs), ZrPP-n (n = 1, 2), featuring infinite ZrIV -oxo chains linked via polyphenolate groups on four peripheries of eclipse-arranged porphyrin macrocycles, are successfully constructed through a top-down process from simulation to synthesis. These are the unusual examples of Zr-MOFs (or MOFs in general) based on phenolic porphyrins, instead of commonly known carboxylate-based types. Representative ZrPP-1 not only exhibits strong acid resistance (pH = 1, HCl) but also remains intact even when immersed in saturated NaOH solution (≈20 m), an exceptionally large range of pH resistance among MOFs. The metallation at the porphyrin core gives rise to materials with enhanced sorption and catalytic properties. In particular, ZrPP-1-Co, with precise and uniform distribution of active centers, exhibits not only high CO2 trapping capability (≈90 cm3 g-1 at 1 atm, 273 K, among the highest in Zr-MOFs) but also high photocatalytic activity for reduction of CO2 into CO (≈14 mmol g-1 h-1 ) and high selectivity over CH4 (>96.4%) without any cocatalyst under visible-light irradiation (λ > 420 nm). Given the strong chemical resistance under extreme alkali conditions, these catalysts can be recycled without appreciable loss of activity. The possible mechanism for photocatalytic reduction of CO2 -to-CO over ZrPP-1-Co is also proposed.

[Effect of the thickness of reinforced glass ceramics on the degree of conversion of dual-cure resin cements].

PURPOSE: To determine the effect of the thickness of reinforced glass ceramics on the degree of conversion (DC) of three dual-cure resin cements (Multilink N, RelyX Ultimate and NX3-Nexus). METHODS: Upcera reinforced glass ceramics and IPS e.max CAD test specimen were processed, with different thickness, transmittance was tested by ultraviolet and visible spectrometer. The DC was evaluated using Fourier transform infrared (FT-IR) spectrometer, then the degree of conversion of polymerization before and after curing was calculated. SPSS 21.0 software package was used for data analysis. RESULTS: Transmittance decreased along with the thickness of reinforced glass ceramics increased. At 2 mm -thickness transmittance of upcera lithium disilicate glass ceramics was superior to IPS e.max CAD. The DC of dual-cured resin cement was decreased with the increase of thickness. At the same 2 mm group, the DC of Multilink N and RelyX Ultimate under upcera lithium disilicate glass ceramics were superior to that under IPS e.max CAD groups. CONCLUSIONS: At 2 mm-thickness transmittance of upcera lithium disilicate glass ceramics was superior to IPS e.max CAD. At the same 2 mm group, the DC of Multilink N and RelyX Ultimate under upcera lithium disilicate glass ceramics were superior to that under IPS e.max CAD groups.

[Cloning of an expressed sequence tag with restriction display polymerase chain reaction].

OBJECTIVE: To isolate gene fragments from SH-SY5Y cells by way of restriction display polymerase chain reaction (RD-PCR). METHODS: Total mRNA was extracted from SH-SY5Y cells followed by synthesis of the single-strand cDNA with Oligo (dT18) as the anchored primer, and the second strand was synthesized by nick translation. The double strands were cleft with restriction enzyme Sau3A I and the fragments ligated with a universal adapter to be amplified with the universal primers and selected primers. The products were then ligated into the pMD18-T vector and sequenced. RESULTS: One of the sequenced clones was retrieved in the National Center for Biotechnology Information (NCBI) databases with Blast program. The results showed that the sequence possessed great similarity to one fragment of the 17th chromosome in the genome. Sequence analysis with GenScan software indicated that the EST might be one section of an unknown gene. CONCLUSION: RD-PCR provides simple and efficient approach for isolating EST from cells, and cDNA clone sequencing combined with bioinformatics analysis may be helpful in identifying new genes.