[Perspective on the Development of Integrative Medicine Based on the Paradigm Theory: On the Connotation and Extension of Integrative Medicine].

Integrative medicine (IM) has made great progress after more than half a century practice. However, many issues are yet to be in-depth explored. How to define clinical connotation and extension of IM, how to define feasible methods and means for diagnosis and treatment of IM, how to train more skilled talents of IM, how to elevate clinical efficacy of IM, these are all topics in need of further study. In this paper authors explored the clinical development mode of IM, extracted connotation and extension of IM clinics, hoping to promote the development of IM clinics.

Millimeter wave promotes the synthesis of extracellular matrix and the proliferation of chondrocyte by regulating the voltage-gated K+ channel.

Previously, we reported that millimeter wave promoted the chondrocyte proliferation by pushing cell cycle progression. Activation of K(+) channels plays an essential role in the stimulating of extracellular matrix (ECM) synthesis and the cell proliferation in chondrocytes. While it is unclear if millimeter wave enhances ECM synthesis and proliferation of chondrocytes by regulating K(+) channel activity, we here investigated the effects of millimeter waves on ECM synthesis, chondrocyte proliferation and ion channels in the primary chondrocyte culture. We found that millimeter waves led to the increase of chondrocyte viability, the morphological changes of chondrocyte, and the F-actin distortion and remodeling. Ultrastructural analysis showed that treated chondrocytes contained an expansion of mitochondria and granular endoplasmic reticulum, and a high number of cytoplasmic vesicles in the cytoplasm compared to untreated cells, suggesting millimeter waves increased the energy metabolism and protein synthesis of chondrocytes. The analysis of differential ion channels' genes expression further showed an obvious increase of Kcne1, Kcnj3 and Kcnq2. To determine the role of voltage-gated K(+) channel in chondrocyte, we blocked the voltage-gated K(+) channel with 10 mM tetraethylammonium (TEA) and treated chondrocytes with millimeter waves. The results indicated that TEA significantly negated the promotion of millimeter waves for the ECM synthesis and chondrocyte proliferation. Our results support the hypothesis that millimeter waves promote the synthesis of ECM and the proliferation of chondrocyte by regulating the voltage-gated K(+) channel.

Overexpression of Shox2 leads to congenital dysplasia of the temporomandibular joint in mice.

Our previous study reported that inactivation of Shox2 led to dysplasia and ankylosis of the temporomandibular joint (TMJ), and that replacing Shox2 with human Shox partially rescued the phenotype with a prematurely worn out articular disc. However, the mechanisms of Shox2 activity in TMJ development remain to be elucidated. In this study, we investigated the molecular and cellular basis for the congenital dysplasia of TMJ in Wnt1-Cre; pMes-stop Shox2 mice. We found that condyle and glenoid fossa dysplasia occurs primarily in the second week after the birth. The dysplastic TMJ of Wnt1-Cre; pMes-stop Shox2 mice exhibits a loss of Collagen type I, Collagen type II, Ihh and Gli2. In situ zymography and immunohistochemistry further demonstrate an up-regulation of matrix metalloproteinases (MMPs), MMP9 and MMP13, accompanied by a significantly increased cell apoptosis. In addition, the cell proliferation and expressions of Sox9, Runx2 and Ihh are no different in the embryonic TMJ between the wild type and mutant mice. Our results show that overexpression of Shox2 leads to the loss of extracellular matrix and the increase of cell apoptosis in TMJ dysplasia by up-regulating MMPs and down-regulating the Ihh signaling pathway.

[Comparative research on computer simulation of two different therapeutic principles and formulae for osteoarthritis].

OBJECTIVE: To compare the effect of reinforcing Shen method (RSM) and activating blood method (ABM) in treating osteoarthritis (OA) at the molecular level. METHODS: The physical and chemical characteristics of components from respective recipes of RSM and ABM, and network features of component-target interaction network were analyzed by computer simulation methods including chemical space, molecular docking, and biological network, etc. RESULTS: The chemical components of RSM and ABM were scarcely scattered with larger overlapping. Among established networks, the distribution of network features was partially similar in RSM and ABM. The average target number correlated with each component was 1.86 in RSM and 2.11 in ABM respectively. Each average target number was respectively correlated with 4.46 compounds and 3.93 compounds, reflecting multi-component and multi-target actions. CONCLUSION: Computer simulation could intuitively trace out similarities and differences of two different methods and their interaction with targets, which revealed that the compatibility of RSM and ABM could have broader protein targets and potential synergism at the molecular level.

Efficient one-pot transformation of furfural to pentanediol over Cu-modified cobalt-based catalysts.

Pentanediols are substances with significant market potential as the key monomers for advanced polymeric materials. In this study, we successfully achieved directly hydrogenolysis of biomass-based furfural to 1,5-pentanediol with a remarkable yield of 53.4 % using Cu-modified cobalt supported on cerium dioxide catalysts. Through comprehensive characterization techniques, including H2-TPR, NH3-TPD, XPS, EPR and Raman analysis, the study revealed that the introduction of Cu altered the dispersion of Co species, attenuated the interaction between Co species and cerium dioxide, enhanced its reduction extent, and fostered the formation of plentiful cobalt oxide species and oxygen vacancies on the catalyst's surface. The cooperative influence of Cu and Co heightened the selectivity of the hydrogenolysis reaction. This work provides a novel strategy for the development of greener and more efficient catalytic processes based on non-precious metals that for the selective conversion of biomass-derived furfural to high-value pentanediols.

Oxygen Vacancies Enrichment in Citric Acid-Assisted Synthesis of Zirconia Supported Ni Catalyst for Highly Selective Hydrogenolysis of 5-Hydroxymethylfurfural.

2, 5-Dimethylfuran (DMF), which is a promising new-generation liquid biofuel, has attracted widespread attention owing to the sustainability of biomass-derived energy sources. In this study, a highly dispersed zirconia-supported nickel catalyst (CA-Ni/ZrO2) was prepared via citric acid-assisted wetness impregnation for the selective hydrogenolysis of 5-hydroxymethylfurfural (HMF) to produce DMF. The characterization results confirmed the presence of Zr3+ species in the mesoporous CA-Ni/ZrO2 catalyst and the formation of oxygen vacancies during its preparation, which led to the formation of a large number of catalytically active sites for the adsorption and activation of the C=O/C-O groups. Under appropriate reaction parameters, an excellent DMF selectivity of 99.1% and an HMF conversion of 98.4% were achieved. A suitable kinetic model revealed that DMF was preferentially formed via the 2,5-dihydroxymethylfuran intermediate route, although a 5-methylfurfural route was also observed. Additionally, the interaction between Ni and ZrO2 significantly affected the stability of the catalyst. This study will provide guidelines for optimizing the catalytic conversion of furan derivatives over heterogeneous catalysts.

Dual-channel cathodic electrochemiluminescence of luminol induced by injection of hot electrons on a niobate semiconductor modified electrode.

In this paper, a new niobate semiconductor photocatalyst Sr(0.4)H(1.2)Nb(2)O(6)·H(2)O (HSN) nanoparticle was applied to investigate the cathodic electrochemiluminescent (ECL) behavior of luminol for the first time. The results presented here demonstrated that there were two ECL peaks of luminol at the cathodic potential attributed to immobilization of HSN on the electrode surface. It is implied that HSN can be electrically excited and injected electrons into aqueous electrolytes from this electrode under a quite low potential that only excites luminol. A mechanism for this luminol-ECL system on HSN/GCE has been proposed. Additionally, this HSN/GCE has lots of advantages, such as high stability, good anti-interference ability, simple instrumentation, rapid procedure and ultrasensitive ECL response. It is envisioned that this HSN/GCE has further applications in biosensors.

[Effect of water extracts from duhuo jisheng decoction on expression of chondrocyte G1 phase regulator mRNA].

OBJECTIVE: To investigate the effect of water extracts from Duhuo Jisheng decoction on chondrocyte G1 phase. METHODS: Chondrocytes were collected from four-week-old SD rats to establish the chondrocyte in vitro culture system. The third generation of chondrocytes was intervened. MTT method was used to measure the effect of water extracts from different concentrations of Duhuo Jisheng decoction on chondrocyte activity. The expressions of Chondrocyte Cyclin D1, CDK4, CDK6 and P21 mRNA in the blank group and low, middle and high-dose groups (100, 200, 400 mg x L(-1)) were detected by RT-PCR method. RESULT: The MTT assay showed that the chondrocyte activity significantly increased within specific drug concentrations (50-800 mg x L(-1)) (P < 0.01); After the intervention for 24 h, the expressions of CyclinD1, CDK4 and CDK6 mRNA in all dose groups notably increased (P < 0.05), with the maximum expressions at the concentration of 200 mg x L(-1); The expression of P21 mRNA decreased, particularly at the concentration of 200 mg x L(-1) (P < 0.01). CONCLUSION: Water extracts from Duhuo Jisheng decoction can promote chondrocyte proliferation by effecting the expression of chondrocyte G1 phase regulator mRNA.

[Microstructure and histochemical localization of flavonoids in leaves and stem in Sarcandra glabra].

Microscopic and histochemical methods were used to investigate flavonoids localization in the leaf and the stem of the Sarcandra glabra. The results indicated that flavonoids distributed mainly in epidermis, collenchyma, vascular bundles, secretory cells and palisade tissue of leaf. In the stem, they distributed mainly in epidermis, collenchyma, phloem and secretory cells. Histochemical localization of flavonoids using 5% solution of NaOH is convenient, rapid and reliable. The content of flavonoids in the leaf was higher those than in the stem. For sustainable utilization of the resources we suggested that only the leaves could be harvested.

Highly Efficient One-Step Conversion of Fructose to Biofuel 5-Ethoxymethylfurfural Using a UIO-66-SO3H Catalyst.

In this study, a novel sulfonic acid-modified catalyst for MOFs (UIO-66-SO3H) was synthesized using chlorosulfonic acid as a sulfonating reagent and first used as efficient heterogeneous catalysts for the one-pot conversion of fructose into biofuel 5-ethoxymethylfurfural (EMF) in a cosolvent free system. The physicochemical properties of this catalyst were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), and powder X-ray diffraction (XRD). The characterization demonstrated that the sulfonic acid group was successfully grafted onto the MOF material and did not cause significant changes to its morphology and structure. Furthermore, the effects of catalyst acid amount, reaction temperature, reaction time, and catalyst dosage on reaction results were investigated. The results showed that the conversion of fructose was 99.7% within 1 h at 140°C, while the EMF yield reached 80.4%. This work provides a viable strategy by application of sulfonic acid-based MOFs for the efficient synthesis of potential liquid fuel EMF from renewable biomass.

Titania Nanotubes-Bonded Sulfamic Acid as an Efficient Heterogeneous Catalyst for the Synthesis of n-Butyl Levulinate.

The titania nanotubes-bonded sulfamic acid (TNTs-NHSO3H) catalyst was designed and successfully fabricated by the post-synthesis modification method. The as-prepared catalyst was characterized by a variety of characterization techniques, including Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, and thermogravimetry-differential thermal gravimetry (TG-DTG). The crystal structure of the TNTs still maintained during the modification process. Although the BET surface area was decreased, the amount of Brønsted acid sites can be efficiently fabricated on the TNTs. The catalytic activity of TNTs-NHSO3H was examined for the synthesis of n-butyl levulinate (BL) from levulinic acid (LA) and furfuryl alcohol (FA). A relatively high selectivity (99.6%) at 99.3% LA conversion was achieved for esterification of levulinic acid owing to the strong Brønsted acidity sites. And also, the TNTs-NHSO3H catalyst exhibited a higher reactivity for alcoholysis of FA and the yield of BL reached 90.4% with 100% FA conversion was obtained under the mild conditions.

Titanate Nanotubes-Based Heterogeneous Catalyst for Efficient Production of Biomass Derived Chemicals.

The development of efficient heterogeneous catalytic system to convert plentiful biomass to renewable bio-chemicals is urgent need. Titanate nanotubes-based materials obtained from hydrothermal treatment have been reported as low-cost and efficient catalytic materials in chemical syntheses for bio-based chemicals production with interesting catalytic performance. This mini-review expressly revealed the significance and potential of using titanate nanotubes based material as sustainable and environmentally benign solid catalysts/supports for synthesis of various bio-based chemicals, including glycerol-derived solketal, jet fuel range alkanes precursors, biomass-derived esters, aldehydes, aromatic compounds and so on. From the current knowledge on titanate nanotubes-based material via hydrothermal method here summarized, the future lines of research in the field of catalysis/supports for bio-based chemicals production are outlined.

Recent Advances in the Catalytic Hydroconversion of 5-Hydroxymethylfurfural to Valuable Diols.

Biomass, a globally available resource, is a promising alternative feedstock for fossil fuels, especially considering the current energy crisis and pollution. Biomass-derived diols, such as 2,5-bis(hydroxymethyl)furan, 2,5-bis(hydroxymethyl)-tetrahydrofuran, and 1,6-hexanediol, are a significant class of monomers in the polyester industry. Therefore, the catalytic conversion of biomass to valuable diols has received extensive research attention in the field of biomass conversion and is a crucial factor in determining the development of the polyester industry. 5-Hydroxymethylfurfural (HMF) is an important biomass-derived compound with a C6-furanic framework. The hydroconversion of HMF into diols has the advantages of being simple to operate, inexpensive, environmentally friendly, safe, and reliable. Therefore, in the field of diol synthesis, this method is regarded as a promising approach with significant industrialization potential. This review summarizes recent advances in diol formation, discusses the roles of catalysts in the hydroconversion process, highlights the reaction mechanisms associated with the specificities of each active center, and provides an outlook on the challenges and opportunities associated with the research on biomass-derived diol synthesis.

Determination of the epimerization rate constant of amygdalin by microemulsion electrokinetic chromatography.

A new method for separation and determination of amygdalin and its epimer (neoamygdalin) in the epimerization of amygdalin by MEEKC is proposed. For the chiral separation of amygdalin and neoamygdalin, a running buffer composed of 80 mM sodium cholate, 5.0% v/v butan-1-ol, 0.5% v/v heptane and 94.5% v/v 30 mM Na(2) B(4) O(7) buffer (pH 9.00) is proposed. Under optimum conditions, the basic separation of amygdalin and neoamygdalin can be achieved within 7 min. The calibration curve for amygdalin showed excellent linearity in the concentration range of 20-1000 µg/mL with a detection limit of 5.0 µg/mL (S/N=3). The epimerization rate constant of amygdalin in basic microemulsion was first determined by monitoring the concentration changes of amygdalin, and the epimerization rate constant of amygdalin was found to be 2×10(-3) min(-1) at 25°C under the above optimum microemulsion conditions.

Solid-phase extraction-field-amplified sample injection coupled with CE-ESI-MS for online pre-concentration and quantitative analysis of brain-gut peptides.

In order to improve the sensitivity of CE-ESI-MS for the analysis of brain-gut peptides, a solid-phase extraction combined with field-amplified sample injection was used for the pre-concentration of the brain-gut peptides. Compared with the conventional pressure injection method, the sensitivity in the detection of brain-gut peptides was improved more than 100-fold. The possible factors affecting sample stacking, such as the sample matrix, the composition and the length of the water column, the types and the volumes of eluent, have been investigated in detail. Under the optimum conditions, the detectable concentration of brain-gut peptides was found to be as low as 0.02 µM. A linear response concentration for the detection was developed in the range of 0.08-25 µmol/L. A real sample of human cerebrospinal fluids, which was spiked with brain-gut peptides, was also examined in order to evaluate the reliability of the proposed approach. The recovery of the method was in a range from 69.2 to 85.4%. The method was found to be reliable, accurate and potentially applicable for clinical drug analysis.

Efficient synthesis of 5-ethoxymethylfurfural from biomass-derived 5-hydroxymethylfurfural over sulfonated organic polymer catalyst.

Herein, we investigated catalytic potential of a functionalized porous organic polymer bearing sulfonic acid groups (PDVTA-SO3H) to the etherification of 5-hydroxymethylfurfural (HMF) to 5-ethoxymethylfurfural (EMF) under solvent-free conditions. The PDVTA-SO3H material was synthesized via post-synthetic sulfonation of the porous co-polymer poly-divinylbenzene-co-triallylamine by chlorosulfonic acid. The physicochemical properties of the PDVTA-SO3H were characterized by FT-IR, SEM, TG-DTG, and N2 adsorption isotherm techniques. PDVTA-SO3H had high specific surface area (591 m2 g-1) and high density of -SO3H group (2.1 mmol g-1). The reaction conditions were optimized via Box-Behnken response surface methodology. Under the optimized conditions, the PDVTA-SO3H catalyst exhibited efficient catalytic activity with 99.8% HMF conversion and 87.5% EMF yield within 30 min at 110 °C. The used PDVTA-SO3H catalyst was readily recovered by filtration and remained active in recycle runs.

Selective Catalytic Isomerization of ß-Pinene Oxide to Perillyl Alcohol Enhanced by Protic Tetraimidazolium Nitrate.

A series of tetraimidazolium salts with different anions was prepared and applied in the isomerization of ß-pinene oxide. After examining the activity of different catalysts, a remarkable enhancement of the selectivity of perillyl alcohol (47 %) was obtained over [PEimi][HNO3 ]4 under mild reaction conditions and using DMSO as the solvent. Furthermore, noncovalent interactions between solvent molecules and the catalyst were found by FT-IR spectroscopy and confirmed by computational chemistry. The homogeneous catalyst showed excellent stability and was reused up to six times without significant loss.

Affinity capillary electrophoresis coupling with partial filling technique and field-amplified sample injection for enantioseparation and determination of DL-tetrahydropalmatine.

A novel, simple and sensitive method for the enantioseparation and determination of DL-tetrahydropalmatine (DL-THP) was developed using ACE in combination with partial filling technique and field-amplified sample injection. A chiral selector, i.e. BSA, was used for the enantioseparation of DL-THP in ACE. Effects of BSA concentration, pH and separation voltage on the effectiveness of the enantiomer separation were evaluated. In an optimal condition, D- and L-THP were completely enantio-separated in less than 9 min by partially filling an electrophoretic capillary with 50 micromol/L BSA (50 mbar, 100 s) and carrying out an electrophoresis with 20 mmol/L phosphate buffer (pH 7.4) at 15 kV. The sensitivity was further improved by making use of field-amplified sample injection to lower the LOD (defined as S/N=3) down to 6 ng/mL. Real samples were also tested and promising results for the determination of DL-THP enantiomers were obtained.

CE-ESI-MS coupled with dynamic pH junction online concentration for analysis of peptides in human urine samples.

In this article, an approach has been developed for the analysis of some small peptides with similar pI values by CE-ESI-MS based on the online concentration strategy of dynamic pH junction. The factors affected on the separation, detection and online enrichment, such as BGE, injection pressure, sheath flow liquid and separation voltage have been investigated in detail. Under the optimum conditions, i.e. using 0.5 mol/L formic acid (pH 2.15) as the BGE, preparing the sample in 50 mM ammonium acetate solution (pH 7.5), 50 mbar of injection pressure for 300 s, using 7.5 mM of acetic acid in methanol-water (80% v/v) solution as the sheath flow liquid and 20 kV as the separation voltage, four peptides with similar pI values, such as L-Ala-L-Ala (pI = 5.57), L-Leu-D-Leu (pI = 5.52), Gly-D-Phe (pI = 5.52) and Gly-Gly-L-Leu (pI = 5.52) achieved baseline separation within 18.3 min with detection limits in the range of 0.2-2.0 nmol/L. RSDs of peak migration time and peak area were in the range of 1.45-3.57 and 4.93-6.32%, respectively. This method has been applied to the analysis of the four peptides in the spiked urine sample with satisfactory results.