Enhancing Zn2+ Storage Performance by Constructing the Interfaces Between VO2 and Co-N-C Layers.

Vanadium oxides have aroused attention as cathode materials in aqueous zinc-ion batteries (AZIBs) due to their low cost and high safety. However, low ion diffusion and vanadium dissolution often lead to capacity decay and deteriorating stability during cycling. Herein, vanadium dioxides (VO2) nanobelts are coated with a single-atom cobalt dispersed N-doped carbon (Co-N-C) layer via a facile calcination strategy to form Co-N-C layer coated VO2 nanobelts (VO2@Co-N-C NBs) for cathodes in AZIBs. Various in-/ex situ characterizations demonstrate the interfaces between VO2 layers and Co-N-C layers can protect the VO2 NBs from collapsing, increase ion diffusion, and enhance the Zn2+ storage performance. Additional density functional theory (DFT) simulations demonstrate that Co─O─V bonds between VO2 and Co-N-C layers can enhance interfacial Zn2+ storage. Moreover, the VO2@Co-N-C NBs provided an ultrahigh capacity (418.7 mAh g-1 at 1 A g-1), outstanding long-term stability (over 8000 cycles at 20 A g-1), and superior rate performance.

Charged Nanowire-Directed Growth of Amorphous Calcium Carbonate Nanosheets in a Mixed Solvent for Biomimetic Composite Films.

Bio-inspired mineralization is an effective way for fabricating complex inorganic materials, which inspires us to develop new methods to synthesize materials with fascinating properties. In this article, we report that the charged tellurium nanowires (TeNWs) can be used as biomacromolecule analogues to direct the formation of amorphous calcium carbonate (ACC) nanosheets (ACCNs) in a mixed solvent. The effects of surface charges and the concentration of the TeNWs on the formation of ACCNs have been investigated. Particularly, the produced ACCNs can be functionalized by Fe3O4 nanoparticles to produce magnetic ACC/Fe3O4 hybrid nanosheets that can be used to construct ACC/Fe3O4 composite films through a self-evaporation process. Moreover, sodium alginate-ACC nanocomposite films with remarkable toughness and good transmittance can also be fabricated by using such ACCNs as nanoscale building blocks. This mineralization approach in a mixed solvent using charged TeNWs as biomacromolecule analogues provides a new way for the synthesis of ACCNs, which can be used as nanoscale building blocks for the fabrication of biomimetic composite films.

Tuning the Electronic Property of Reconstructed Atomic Ni-CuO Cluster Supported on N/O-C for Electrocatalytic Oxygen Evolution.

Electrochemical activation usually accompanies in situ atom rearrangement forming new catalytic sites with higher activity due to reconstructed atomic clusters or amorphous phases with abundant dangling bonds, vacancies, and defects. By harnessing the pre-catalytic process of reconstruction, a multilevel structure of CuNi alloy nanoparticles encapsulated in N-doped carbon (CuNi nanoalloy@N/C) transforms into a highly active compound of Ni-doped CuO nanocluster supported on (N/O-C) co-doped C. Both the exposure of accessible active sites and the activity of individual active sites are greatly improved after the pre-catalytic reconstruction. Manipulating the Cu/Ni ratios of CuNi nanoalloy@N/C can tailor the electronic property and d-band center of the high-active compound, which greatly optimizes the energetics of oxygen evolution reaction (OER) intermediates. This interplay among Cu, Ni, C, N, and O modifies the interface, triggers the active sites, and regulates the work functions, thereby realizing a synergistic boost in OER.

Anchoring ZIF-67 particles on amidoximerized polyacrylonitrile fibers for radionuclide sequestration in wastewater and seawater.

Capturing uranium (U(VI)) ions from wastewater and seawater is highly attractive for the environment and clean energy with the increasing deficiency of land sources. Howbeit, the massive volume of water and the ultralow concentration of U(VI) pose a substantial challenge to the industrial application. Accordingly, we have synthesized a novel organic-inorganic hybrid adsorbent through in-situ growing MOF particles on electrospun polyacrylonitrile fibers (PAN) followed by modifing with amidoxime groups to form amidoximed PAN/ZIF-67 (AOPAN/ZIF) hybrid fibers. In such fibers, the N atoms from imidazole and amidoxime can improve the adsorption performance synergistically in a wide pH range, which is favorable for capturing U(VI) under nuclear wastewater and seawater. As a result, the AOPAN/ZIF fibers exhibit high adsorption amount of 498.4 mg g-1 in U(VI) contaminated aqueous solution at pH 4. Furthermore, the adsorption amount of U(VI) reached 2.03 mg g-1 in natural seawater after 36 d, which implies that the AOPAN/ZIF fibers may promote the development of U(VI) recovery.

Bio-Inspired Synthesis of Hematite Mesocrystals by Using Xonotlite Nanowires as Growth Modifiers and Their Improved Oxygen Evolution Activity.

Bio-inspired synthesis of functional materials with highly ordered structure and tunable properties is of particular interest, but efficient approaches that allow the access of these materials are still limited. A method has been developed for the preparation of hematite particles by using xonotlite nanowires (XNWs) as growth modifiers. The concentration of the XNWs has a profound effect on the final morphology of the products, whereas the concentration of the iron(III) ions can control the size of the hematite particles. The underlying mechanism of the bio-inspired XNW-modified mineralization process has been proposed. The obtained hematite particles exhibit good catalytic performance in the oxygen evolution reaction (OER), affording a current density of 10 mA cm-2 with an overpotential of 370 mV, a small Tafel slope of 65 mV dec-1 , and good stability in alkaline electrolyte. This strategy for preparing functional materials by using nanowires as the growth modifiers has great potential for future application in the construction of various materials with hierarchical structures.

Synthetic nacre by predesigned matrix-directed mineralization.

Although biomimetic designs are expected to play a key role in exploring future structural materials, facile fabrication of bulk biomimetic materials under ambient conditions remains a major challenge. Here, we describe a mesoscale "assembly-and-mineralization" approach inspired by the natural process in mollusks to fabricate bulk synthetic nacre that highly resembles both the chemical composition and the hierarchical structure of natural nacre. The millimeter-thick synthetic nacre consists of alternating organic layers and aragonite platelet layers (91 weight percent) and exhibits good ultimate strength and fracture toughness. This predesigned matrix-directed mineralization method represents a rational strategy for the preparation of robust composite materials with hierarchically ordered structures, where various constituents are adaptable, including brittle and heat-labile materials.

Super-elastic and fatigue resistant carbon material with lamellar multi-arch microstructure.

Low-density compressible materials enable various applications but are often hindered by structure-derived fatigue failure, weak elasticity with slow recovery speed and large energy dissipation. Here we demonstrate a carbon material with microstructure-derived super-elasticity and high fatigue resistance achieved by designing a hierarchical lamellar architecture composed of thousands of microscale arches that serve as elastic units. The obtained monolithic carbon material can rebound a steel ball in spring-like fashion with fast recovery speed (∼580 mm s-1), and demonstrates complete recovery and small energy dissipation (∼0.2) in each compress-release cycle, even under 90% strain. Particularly, the material can maintain structural integrity after more than 106 cycles at 20% strain and 2.5 × 105 cycles at 50% strain. This structural material, although constructed using an intrinsically brittle carbon constituent, is simultaneously super-elastic, highly compressible and fatigue resistant to a degree even greater than that of previously reported compressible foams mainly made from more robust constituents.

[Preparation of recombinant Mycobacterium tuberculosis ESAT6-PPE68 fusion protein].

OBJECTIVE: To construct esat6-ppe68 fusion gene and its prokaryotic expression vector for expression in E. coli. METHODS: With GeneSOEing method, a fusion gene was constructed by splicing esat6 gene and ppe68 gene and cloned into pGEX-4T-1 plasmid to construct the recombinant prokaryotic expression plasmid pGesat6-ppe68. After identification with restriction enzyme analysis, PCR and nucleotide sequencing analysis of the plasmid, E. coli BL21 was transformed with the recombinant plasmid and induced with IPTG to obtain the expression of the fusion protein ESAT6-PPE68 with GST-tag (about 69 kD), which were purified with GST-fusion protein purification kit. The expression of esat6-ppe68 fusion gene was subsequently detected by SDS-PAGE and Western blot analysis. RESULTS: The sequence of esat6 and ppe68 in the recombinant plasmid was consistent with that in GenBank report. The fusion protein was detected in the cytoplasm in soluble form and represented approximately 40% of the total bacterial protein of E. coli. After purification, the purity of the fusion protein reached 90%, and its antigenicity was confirmed by Western blotting. CONCLUSION: The prokaryotic expression vector pGesat6-ppe68 has been constructed and the fusion protein ESAT6-PPE68 obtained successfully, which provides an experimental basis for potential application of the recombinant ESAT6-PPE68 in the diagnosis of tuberculosis.