Bevel-edge epitaxy of ferroelectric rhombohedral boron nitride single crystal.

Within the family of two-dimensional dielectrics, rhombohedral boron nitride (rBN) is considerably promising owing to having not only the superior properties of hexagonal boron nitride1-4-including low permittivity and dissipation, strong electrical insulation, good chemical stability, high thermal conductivity and atomic flatness without dangling bonds-but also useful optical nonlinearity and interfacial ferroelectricity originating from the broken in-plane and out-of-plane centrosymmetry5-23. However, the preparation of large-sized single-crystal rBN layers remains a challenge24-26, owing to the requisite unprecedented growth controls to coordinate the lattice orientation of each layer and the sliding vector of every interface. Here we report a facile methodology using bevel-edge epitaxy to prepare centimetre-sized single-crystal rBN layers with exact interlayer ABC stacking on a vicinal nickel surface. We realized successful accurate fabrication over a single-crystal nickel substrate with bunched step edges of the terrace facet (100) at the bevel facet (110), which simultaneously guided the consistent boron-nitrogen bond orientation in each BN layer and the rhombohedral stacking of BN layers via nucleation near each bevel facet. The pure rhombohedral phase of the as-grown BN layers was verified, and consequently showed robust, homogeneous and switchable ferroelectricity with a high Curie temperature. Our work provides an effective route for accurate stacking-controlled growth of single-crystal two-dimensional layers and presents a foundation for applicable multifunctional devices based on stacked two-dimensional materials.

Atomic-scale probing of heterointerface phonon bridges in nitride semiconductor.

Interface phonon modes that are generated by several atomic layers at the heterointerface play a major role in the interface thermal conductance for nanoscale high-power devices such as nitride-based high-electron-mobility transistors and light-emitting diodes. Here we measure the local phonon spectra across AlN/Si and AlN/Al interfaces using atomically resolved vibrational electron energy-loss spectroscopy in a scanning transmission electron microscope. At the AlN/Si interface, we observe various interface phonon modes, of which the extended and localized modes act as bridges to connect the bulk AlN modes and bulk Si modes and are expected to boost the phonon transport, thus substantially contributing to interface thermal conductance. In comparison, no such phonon bridge is observed at the AlN/Al interface, for which partially extended modes dominate the interface thermal conductivity. This work provides valuable insights into understanding the interfacial thermal transport in nitride semiconductors and useful guidance for thermal management via interface engineering.

Atomic-Scale Mechanism of Enhanced Electron-Phonon Coupling at the Interface of MgB2 Thin Films.

In conventional Bardeen-Cooper-Schrieffer (BCS) superconductors, electron-phonon coupling is the fundamental mechanism of superconductivity. For instance, the superconductivity of magnesium diboride (MgB2) comes from the coupling between E2g modes (in-plane boron-boron bond vibrations) and self-doped charge carriers. In thin films and ceramics of BCS superconductors, interfaces with discontinuous chemical bonds may alter the local electron-phonon coupling. However, such effects remain largely unexplored. Here, we investigate the heterointerface of the MgB2 film on the SiC substrate at the atomic scale using electron microscopy and spectroscopy. We detect the presence of a thin MgO layer with a thickness of ∼1 nm between MgB2 and SiC. Atomic-level electron energy loss spectra (EELS) show MgB2-E2g mode splitting and softening near the MgB2/MgO interface, which enhances electron-phonon coupling at the interface. Our findings highlight the potential of interface engineering to enhance superconductivity via modulating local phonon states and/or electron states.

Atomic Evolution Mechanism and Suppression of Edge Threading Dislocations in Nitride Remote Heteroepitaxy.

The majority of dislocations in nitride epilayers are edge threading dislocations (TDs), which diminish the performance of nitride devices. However, it is extremely difficult to reduce the edge TDs due to the lack of available slip systems. Here, we systematically investigate the formation mechanism of edge TDs and find that besides originating at the coalescence boundaries, these dislocations are also closely related to geometrical misfit dislocations at the interface. Based on this understanding, we propose a novel strategy to reduce the edge TD density of the GaN epilayer by nearly 1 order of magnitude via graphene-assisted remote heteroepitaxy. The first-principles calculations confirm that the insertion of graphene dramatically reduces the energy barrier required for interfacial sliding, which promotes a new strain release channel. This work provides a unique approach to directly suppress the formation of edge TDs at the source, thereby facilitating the enhanced performance of photoelectronic and electronic devices.

Atomic Mechanism of Strain Alleviation and Dislocation Reduction in Highly Mismatched Remote Heteroepitaxy Using a Graphene Interlayer.

Remote heteroepitaxy is known to yield semiconductor films with better quality. However, the atomic mechanisms in systems with large mismatches are still unclear. Herein, low-strain single-crystalline nitride films are achieved on highly mismatched (∼16.3%) sapphire via graphene-assisted remote heteroepitaxy. Because of a weaker interface potential, the in-plane compressive strain at the interface releases by 30%, and dislocations are prevented. Meanwhile, the lattice distortions in the epilayer disappear when the structure climbs over the atomic steps on substrates because graphene renders the steps smooth. In this way, the density of edge dislocations in as-grown nitride films reduces to the same level as that of the screw dislocations, which is rarely observed in heteroepitaxy. Further, the indium composition in InxGa1-xN/GaN multiquantum wells increases to ∼32%, enabling the fabrication of a yellow light-emitting diode. This study demonstrates the advantages of remote heteroepitaxy for bandgap tuning and opens opportunities for photoelectronic and electronic applications.

Continuous Single-Crystalline GaN Film Grown on WS2 -Glass Wafer.

Use of 2D materials as buffer layers has prospects in nitride epitaxy on symmetry mismatched substrates. However, the control of lattice arrangement via 2D materials at the heterointerface presents certain challenges. In this study, the epitaxy of single-crystalline GaN film on WS2 -glass wafer is successfully performed by using the strong polarity of WS2 buffer layer and its perfectly matching lattice geometry with GaN. Furthermore, this study reveals that the first interfacial nitrogen layer plays a crucial role in the well-constructed interface by sharing electrons with both Ga and S atoms, enabling the single-crystalline stress-free GaN, as well as a violet light-emitting diode. This study paves a way for the heterogeneous integration of semiconductors and creates opportunities to break through the design and performance limitations, which are induced by substrate restriction, of the devices.

Atomic-Scale Mechanism of Spontaneous Polarity Inversion in AlN on Nonpolar Sapphire Substrate Grown by MOCVD.

The performance of nitride devices is strongly affected by their polarity. Understanding the polarity determination and evolution mechanism of polar wurtzite nitrides on nonpolar substrates is therefore critically important. This work confirms that the polarity of AlN on sapphire prepared by metal-organic chemical vapor deposition is not inherited from the nitrides/sapphire interface as widely accepted, instead, experiences a spontaneous polarity inversion during the growth. It is found that at the initial growth stage, the interface favors the nitrogen-polarity, rather than the widely accepted metal-polarity or randomly coexisting. However, the polarity subsequently converts into the metal-polar situation, at first locally then expanding into the whole area, driven by the anisotropy of surface energies, which results in universally existing inherent inverse grain boundaries. Furthermore, vertical two-dimensional electron accumulation originating from the lattice symmetry breaking at the inverse grain boundary is first revealed. This work identifies another cause of high-density defects in nitride epilayers, besides lattice mismatch induced dislocations. These findings also offer new insights into atomic structure and determination mechanism of polarity in nitrides, providing clues for its manipulation toward the novel hetero-polarity devices.

Dynamics of Polar Skyrmion Bubbles under Electric Fields.

Room-temperature polar skyrmions, which have been recently discovered in oxide superlattice, have received considerable attention for their potential applications in nanoelectronics owing to their nanometer size, emergent chirality, and negative capacitance. For practical applications, their manipulation using external stimuli is a prerequisite. Herein, we study the dynamics of individual polar skyrmions at the nanoscale via in situ scanning transmission electron microscopy. By monitoring the electric-field-driven creation, annihilation, shrinkage, and expansion of topological structures in real space, we demonstrate the reversible transformation among skyrmion bubbles, elongated skyrmions, and monodomains. The underlying mechanism and interactions are discussed in conjunction with phase-field simulations. The electrical manipulation of nanoscale polar skyrmions allows the tuning of their dielectric permittivity at the atomic scale, and the detailed knowledge of their phase transition behaviors provides fundamentals for their applications in nanoelectronics.

Cytotoxic alkaloids from the twigs and leaves of Cephalotaxus sinensis.

Twelve new Cephalotaxus alkaloids (1-12) and nine known analogues (13-21) were isolated and identified from the twigs and leaves of Cephalotaxus sinensis. The structures of the new compounds (1-12) were elucidated by extensive spectroscopic analysis and single-crystal X-ray diffraction analysis. Cephalosine H (8) is the third example of an alkaloid containing the cephalolancine skeleton. Cephalosines J and K (10 and 11) are the rare natural Δ(2)1-alkene-6-hydroxyl homoerythrina-type alkaloids isolated from the Cephalotaxus genus. The racemization of cephalotaxine-type alkaloids is discussed. Alkaloids 6, 7, 11, 16, 18 and 19 exhibited broad and potent cytotoxicities against five human cancer cell lines, with IC50 values ranging from 0.053 to 10.720 µM, highlighting these compounds as promising leads for the development of new antitumor agents.

Graphene-Nanorod Enhanced Quasi-Van Der Waals Epitaxy for High Indium Composition Nitride Films.

The nitride films with high indium (In) composition play a crucial role in the fabrication of In-rich InGaN-based optoelectronic devices. However, a major limitation is In incorporation requiring a low temperature during growth at the expense of nitride dissociation. Here, to overcome this limitation, a strain-modulated growth method, namely the graphene (Gr)-nanorod (NR) enhanced quasi-van der Waals epitaxy, is proposed to increase the In composition in InGaN alloy. The lattice transparency of Gr enables constraint of in-plane orientation of nitride film and epitaxial relationships at the heterointerface. The Gr interlayer together with NRs buffer layer substantially reduces the stress of the GaN film by 74.4%, from 0.9 to 0.23 GPa, and thus increases the In incorporation by 30.7%. The first principles calculations confirm that the release of strain accounts for the dramatic improvement. The photoluminescence peak of multiple quantum wells shifts from 461 to 497 nm and the functionally small-sized cyan light-emitting diodes of 7 × 9 mil2 are demonstrated. These findings provide an efficient approach for the growth of In-rich InGaN film and extend the applications of nitrides in advanced optoelectronic, photovoltaic, and thermoelectric devices.

Atomic-Scale Tracking Topological Phase Transition Dynamics of Polar Vortex-Antivortex Pairs.

Non-trivial topological structures, such as vortex-antivortex (V-AV) pairs, have garnered significant attention in the field of condensed matter physics. However, the detailed topological phase transition dynamics of V-AV pairs, encompassing behaviors like self-annihilation, motion, and dissociation, have remained elusive in real space. Here, polar V-AV pairs are employed as a model system, and their transition pathways are tracked with atomic-scale resolution, facilitated by in situ (scanning) transmission electron microscopy and phase field simulations. This investigation reveals that polar vortices and antivortices can stably coexist as bound pairs at room temperature, and their polarization decreases with heating. No dissociation behavior is observed between the V-AV phase at room temperature and the paraelectric phase at high temperature. However, the application of electric fields can promote the approach of vortex and antivortex cores, ultimately leading to their annihilation near the interface. Revealing the transition process mediated by polar V-AV pairs at the atomic scale, particularly the role of polar antivortex, provides new insights into understanding the topological phases of matter and their topological phase transitions. Moreover, the detailed exploration of the dynamics of polar V-AV pairs under thermal and electrical fields lays a solid foundation for their potential applications in electronic devices.

One-step electrodeposition synthesis of NiFePS on carbon cloth as self-supported electrodes for electrochemical overall water splitting.

Electrocatalytic water splitting (EWS) for hydrogen production is considered an ideal strategy for utilizing renewable energy, reducing fossil fuel consumption, and addressing environmental pollution issues. Traditional noble metal electrocatalysts have excellent performance, but their cost is high. Developing efficient, stable, and relatively inexpensive dual functional electrocatalysts is crucial for promoting large-scale EWS hydrogen production processes. Herein, a simple one-step electrodeposition method was used to grow nickel-iron phosphorus-sulfides (NiFePS) on the surface of hydrophilic treated carbon cloth (CC). The resultant NiFePS/CC with a phosphorus to sulfur ratio of 1:4 exhibited the best electrocatalytic performance, requiring only -91 mV and 216 mV overpotentials to generate the current densities of 10 mA·cm-2 in hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. When it was used as a bifunctional electrocatalyst to overall water splitting (OWS), a voltage of 1.536 V can generate a current density of 10 mA·cm-2. The excellent electrocatalytic performance can be ascribed to two factors: 1) the CC with excellent conductivity serves as a growth substrate, reducing the impedance of charge transfer from the electrode to the electrolyte and accelerating the electron transfer rate; 2) The large number of ultra-thin nanosheets formed on the surface of the catalyst increase the electrochemical specific surface area, expose more reaction sites, and thus improve the electrocatalytic reaction performance. This work provides a new approach for designing efficient non-noble metal electrocatalysts for water splitting.

Quasi van der Waals Epitaxy of Single Crystalline GaN on Amorphous SiO2/Si(100) for Monolithic Optoelectronic Integration.

The realization of high quality (0001) GaN on Si(100) is paramount importance for the monolithic integration of Si-based integrated circuits and GaN-enabled optoelectronic devices. Nevertheless, thorny issues including large thermal mismatch and distinct crystal symmetries typically bring about uncontrollable polycrystalline GaN formation with considerable surface roughness on standard Si(100). Here a breakthrough of high-quality single-crystalline GaN film on polycrystalline SiO2/Si(100) is presented by quasi van der Waals epitaxy and fabricate the monolithically integrated photonic chips. The in-plane orientation of epilayer is aligned throughout a slip and rotation of high density AlN nuclei due to weak interfacial forces, while the out-of-plane orientation of GaN can be guided by multi-step growth on transfer-free graphene. For the first time, the monolithic integration of light-emitting diode (LED) and photodetector (PD) devices are accomplished on CMOS-compatible SiO2/Si(100). Remarkably, the self-powered PD affords a rapid response below 250 µs under adjacent LED radiation, demonstrating the responsivity and detectivity of 2.01 × 105 A/W and 4.64 × 1013 Jones, respectively. This work breaks a bottleneck of synthesizing large area single-crystal GaN on Si(100), which is anticipated to motivate the disruptive developments in Si-integrated optoelectronic devices.

Phonon transition across an isotopic interface.

Isotopic mixtures result in distinct properties of materials such as thermal conductivity and nuclear process. However, the knowledge of isotopic interface remains largely unexplored mainly due to the challenges in atomic-scale isotopic identification. Here, using electron energy-loss spectroscopy in a scanning transmission electron microscope, we reveal momentum-transfer-dependent phonon behavior at the h-10BN/h-11BN isotope heterostructure with sub-unit-cell resolution. We find the phonons' energy changes gradually across the interface, featuring a wide transition regime. Phonons near the Brillouin zone center have a transition regime of ~3.34 nm, whereas phonons at the Brillouin zone boundary have a transition regime of ~1.66 nm. We propose that the isotope-induced charge effect at the interface accounts for the distinct delocalization behavior. Moreover, the variation of phonon energy between atom layers near the interface depends on both of momentum transfer and mass change. This study provides new insights into the isotopic effects in natural materials.

Highly Efficient Light-Emitting Diodes Based on Self-Assembled Colloidal Quantum Wells.

Nanocrystal-based light-emitting diodes (Nc-LEDs) have immense potential for next-generation high-definition displays and lighting applications. They offer numerous advantages, such as low cost, high luminous efficiency, narrow emission, and long lifetime. However, the external quantum efficiency (EQE) of Nc-LEDs, typically employing isotropic nanocrystals, is limited by the out-coupling factor. Here efficient, bright, and long lifetime red Nc-LEDs based on anisotropic nanocrystals of colloidal quantum wells (CQWs) are demonstrated. Through modification of the substrate's surface properties and control of the interactions among CQWs, a self-assembled layer with an exceptionally high distribution of in-plane transitions dipole moment of 95%, resulting in an out-coupling factor of 37% is successfully spin-coated. The devices exhibit a remarkable peak EQE of 26.9%, accompanied by a maximum brightness of 55 754 cd m-2 and a long operational lifetime (T95 @100 cd m-2 ) over 15 000 h. These achievements represent a significant advancement compared to previous studies on Nc-LEDs incorporating anisotropic nanocrystals. The work is expected to provide a general self-assembly strategy for enhancing the light extraction efficiency of Nc-LEDs based on anisotropic nanocrystals.

Graphene-driving strain engineering to enable strain-free epitaxy of AlN film for deep ultraviolet light-emitting diode.

The energy-efficient deep ultraviolet (DUV) optoelectronic devices suffer from critical issues associated with the poor quality and large strain of nitride material system caused by the inherent mismatch of heteroepitaxy. In this work, we have prepared the strain-free AlN film with low dislocation density (DD) by graphene (Gr)-driving strain-pre-store engineering and a unique mechanism of strain-relaxation in quasi-van der Waals (QvdW) epitaxy is presented. The DD in AlN epilayer with Gr exhibits an anomalous sawtooth-like evolution during the whole epitaxy process. Gr can help to enable the annihilation of the dislocations originated from the interface between AlN and Gr/sapphire by impelling a lateral two-dimensional growth mode. Remarkably, it can induce AlN epilayer to pre-store sufficient tensile strain during the early growth stage and thus compensate the compressive strain caused by hetero-mismatch. Therefore, the low-strain state of the DUV light-emitting diode (DUV-LED) epitaxial structure is realized on the strain-free AlN template with Gr. Furthermore, the DUV-LED with Gr demonstrate 2.1 times enhancement of light output power and a better stability of luminous wavelength compared to that on bare sapphire. An in-depth understanding of this work reveals diverse beneficial impacts of Gr on nitride growth and provides a novel strategy of relaxing the vital requirements of hetero-mismatch in conventional heteroepitaxy.

Transfer-Enabled Fabrication of Graphene Wrinkle Arrays for Epitaxial Growth of AlN Films.

Formation of graphene wrinkle arrays can periodically alter the electrical properties and chemical reactivity of graphene, which is promising for numerous applications. However, large-area fabrication of graphene wrinkle arrays remains unachievable with a high density and defined orientations, especially on rigid substrates. Herein, relying on the understanding of the formation mechanism of transfer-related graphene wrinkles, the graphene wrinkle arrays are fabricated without altering the crystalline orientation of entire graphene films. The choice of the transfer medium that has poor wettability on the corrugated surface of graphene is proven to be the key for the formation of wrinkles. This work provides a deep understanding of formation process of transfer-related graphene wrinkles and opens up a new way for periodically modifying the surface properties of graphene for potential applications, including direct growth of AlN epilayers and deep ultraviolet light emitting diodes.

Atomic-scale imaging of CH3NH3PbI3 structure and its decomposition pathway.

Understanding the atomic structure and structural instability of organic-inorganic hybrid perovskites is the key to appreciate their remarkable photoelectric properties and understand failure mechanism. Here, using low-dose imaging technique by direct-detection electron-counting camera in a transmission electron microscope, we investigate the atomic structure and decomposition pathway of CH3NH3PbI3 (MAPbI3) at the atomic scale. We successfully image the atomic structure of perovskite in real space under ultra-low electron dose condition, and observe a two-step decomposition process, i.e., initial loss of MA+ followed by the collapse of perovskite structure into 6H-PbI2 with their critical threshold doses also determined. Interestingly, an intermediate phase (MA0.5PbI3) with locally ordered vacancies can robustly exist before perovskite collapses, enlightening strategies for prevention and recovery of perovskite structure during the degradation. Associated with the structure evolution, the bandgap gradually increases from ~1.6 eV to ~2.1 eV. In addition, it is found that C-N bonds can be readily destroyed under irradiation, releasing NH3 and HI and leaving hydrocarbons. These findings enhance our understanding of the photoelectric properties and failure mechanism of MAPbI3, providing potential strategies into material optimization.

Van der Waals epitaxy of nearly single-crystalline nitride films on amorphous graphene-glass wafer.

Van der Waals epitaxy provides a fertile playground for the monolithic integration of various materials for advanced electronics and optoelectronics. Here, a previously unidentified nanorod-assisted van der Waals epitaxy is developed and nearly single-crystalline GaN films are first grown on amorphous silica glass substrates using a graphene interfacial layer. The epitaxial GaN-based light-emitting diode structures, with a record internal quantum efficiency, can be readily lifted off, becoming large-size flexible devices. Without the effects of the potential field from a single-crystalline substrate, we expect this approach to be equally applicable for high-quality growth of nitrides on arbitrary substrates. Our work provides a revolutionary technology for the growth of high-quality semiconductors, thus enabling the hetero-integration of highly mismatched material systems.