Collaborative Team Training in Virtual Reality is Superior to Individual Learning For Performing Complex Open Surgery: A Randomized Controlled Trial.

OBJECTIVE: To assess whether multiplayer immersive Virtual Reality (iVR) training was superior to single-player training for the acquisition of both technical and nontechnical skills in learning complex surgery. BACKGROUND: Superior teamwork in the operating room (OR) is associated with improved technical performance and clinical outcomes. iVR can successfully train OR staff individually; however, iVR team training has yet to be investigated. METHODS: Forty participants were randomized to individual or team iVR training. Individually trained participants practiced alongside virtual avatar counterparts, whereas teams trained live in pairs. Both groups underwent 5 iVR training sessions over 6 weeks. Subsequently, they completed a real-life assessment in which they performed anterior approach total hip arthroplasty surgery on a high-fidelity model with real equipment in a simulated OR. Teams performed together, and individually trained participants were randomly paired up. Videos were marked by 2 blinded assessors recording the 'Non-Operative Technical Skills for Surgeons, Oxford NOn-TECHnical Skills II and Scrub Practitioners' List of Intraoperative Non-Technical Skills' scores. Secondary outcomes were procedure duration and the number of technical errors. RESULTS: Teams outperformed individually trained participants for nontechnical skills in the real-world assessment (Non-Operative Technical Skills for Surgeons: 13.1±1.5 vs 10.6±1.6, P = 0.002, Non-TECHnical Skills II score: 51.7 ± 5.5 vs 42.3 ± 5.6, P = 0.001 and Scrub Practitioners' List of Intraoperative Non-Technical Skills: 10 ± 1.2 vs 7.9 ± 1.6, P = 0.004). They completed the assessment 33% faster (28.2 minutes ± 5.5 vs 41.8 ± 8.9, P < 0.001), and made fewer than half the number of technical errors (10.4 ± 6.1 vs 22.6 ± 5.4, P < 0.001). CONCLUSIONS: Multiplayer training leads to faster surgery with fewer technical errors and the development of superior nontechnical skills.

Immersive virtual reality enables technical skill acquisition for scrub nurses in complex revision total knee arthroplasty.

INTRODUCTION: Immersive Virtual Reality (iVR) is a novel technology which can enhance surgical training in a virtual environment without supervision. However, it is untested for the training to select, assemble and deliver instrumentation in orthopaedic surgery-typically performed by scrub nurses. This study investigates the impact of an iVR curriculum on this facet of the technically demanding revision total knee arthroplasty. MATERIALS AND METHODS: Ten scrub nurses completed training in four iVR sessions over a 4-week period. Initially, nurses completed a baseline real-world assessment, performing their role with real equipment in a simulated operation assessment. Each subsequent iVR session involved a guided mode, where the software taught participants the procedural choreography and assembly of instrumentation in a simulated operating room. In the latter three sessions, nurses also undertook an assessment in iVR. Outcome measures were related to procedural sequence, duration of surgery and efficiency of movement. Transfer of skills from iVR to the real world was assessed in a post-training simulated operation assessment. A pre- and post-training questionnaire assessed the participants knowledge, confidence and anxiety. RESULTS: Operative time reduced by an average of 47% across the 3 unguided sessions (mean 55.5 ± 17.6 min to 29.3 ± 12.1 min, p > 0.001). Assistive prompts reduced by 75% (34.1 ± 16.8 to 8.6 ± 8.8, p < 0.001), dominant hand motion by 28% (881.3 ± 178.5 m to 643.3 ± 119.8 m, p < 0.001) and head motion by 36% (459.9 ± 99.7 m to 292.6 ± 85.3 m, p < 0.001). Real-world skill improved from 11% prior to iVR training to 84% correct post-training. Participants reported increased confidence and reduced anxiety in scrubbing for rTKA procedures (p < 0.001). CONCLUSIONS: For scrub nurses, unfamiliarity with complex surgical procedures or equipment is common. Immersive VR training improved their understanding, technical skills and efficiency. These iVR-learnt skills transferred into the real world.

Can an Augmented Reality Headset Improve Accuracy of Acetabular Cup Orientation in Simulated THA? A Randomized Trial.

BACKGROUND: Accurate implant orientation reduces wear and increases stability in arthroplasty but is a technically demanding skill. Augmented reality (AR) headsets overlay digital information on top of the real world. We have developed an enhanced AR headset capable of tracking bony anatomy in relation to an implant, but it has not yet been assessed for its suitability as a training tool for implant orientation. QUESTIONS/PURPOSES: (1) In the setting of simulated THA performed by novices, does an AR headset improve the accuracy of acetabular component positioning compared with hands-on training by an expert surgeon? (2) What are trainees' perceptions of the AR headset in terms of realism of the task, acceptability of the technology, and its potential role for surgical training? METHODS: Twenty-four study participants (medical students in their final year of school, who were applying to surgery residency programs, and who had no prior arthroplasty experience) participated in a randomized simulation trial using an AR headset and a simulated THA. Participants were randomized to two groups completing four once-weekly sessions of baseline assessment, training, and reassessment. One group trained using AR (with live holographic orientation feedback) and the other received one-on-one training from a hip arthroplasty surgeon. Demographics and baseline performance in orienting an acetabular implant to six patient-specific values on the phantom pelvis were collected before training and were comparable. The orientation error in degrees between the planned and achieved orientations was measured and was not different between groups with the numbers available (surgeon group mean error ± SD 16° ± 7° versus AR 14° ± 7°; p = 0.22). Participants trained by AR also completed a validated posttraining questionnaire evaluating their experiences. RESULTS: During the four training sessions, participants using AR-guidance had smaller mean (± SD) errors in orientation than those receiving guidance from the surgeon: 1° ± 1° versus AR 6° ± 4°, p < 0.001. In the fourth session's assessment, participants in both groups had improved (surgeon group mean improvement 6°, 95% CI, 4-8°; p < 0.001 versus AR group 9°, 95% CI 7-10°; p < 0.001). There was no difference between participants in the surgeon-trained and AR-trained group: mean difference 1.2°, 95% CI, -1.8 to 4.2°; p = 0.281. In posttraining evaluation, 11 of 12 participants would use the AR platform as a training tool for developing visuospatial skills and 10 of 12 for procedure-specific rehearsals. Most participants (11 of 12) stated that a combination of an expert trainer for learning and AR for unsupervised training would be preferred. CONCLUSIONS: A novel head-mounted AR platform tracked an implant in relation to bony anatomy to a clinically relevant level of accuracy during simulated THA. Learners were equally accurate, whether trained by AR or a surgeon. The platform enabled the use of real instruments and gave live feedback; AR was thus considered a feasible and valuable training tool as an adjunct to expert guidance in the operating room. Although there were no differences in accuracy between the groups trained using AR and those trained by an expert surgeon, we believe the tool may be useful in education because it demonstrates that some motor skills for arthroplasty may be learned in an unsupervised setting. Future studies will evaluate AR-training for arthroplasty skills other than cup orientation and its transfer validity to real surgery. LEVEL OF EVIDENCE: Level I, therapeutic study.

The loading patterns of a short femoral stem in total hip arthroplasty: gait analysis at increasing walking speeds and inclines.

BACKGROUND: The purpose of this study was to examine the gait pattern of total hip arthroplasty (THA) patients with a new short femoral stem at different speeds and inclinations. MATERIALS AND METHODS: A total of 40 unilateral THA patients were tested on an instrumented treadmill. They comprised two groups (shorter stemmed THA n = 20, longer stemmed THA n = 20), both which had the same surgical posterior approach. The shorter femoral stemmed patients were taken from an ongoing hip trial with minimum 12 months postop. The comparative longer THR group with similar disease and severity were taken from a gait database along with a demographically similar group of healthy controls (n = 35). All subjects were tested through their entire range of gait speeds and inclines with ground reaction forces collected. Body weight scaling was applied and a symmetry index to compare the implanted hip to the contralateral normal hip. An analysis of variance with significance set at α = 0.05 was used. RESULTS: The experimental groups were matched demographically and implant groups for patient reported outcome measures and radiological disease. Both THA groups walked slower than controls, but symmetry at all intervals for all groups were not significantly different. Push-off loading was less favourable for both the shorter and longer stemmed THR groups (p < 0.05) depending on speed. CONCLUSIONS: Irrespective of femoral stem length, symmetry for ground reaction forces for both THA groups were returned to a normal range when compared to controls. However individual implant performance showed inferior (p < 0.05) push-off forces and normalised step length in both THR groups when compared to controls. LEVEL OF EVIDENCE: III.

Evidence in managing traumatic anterior shoulder instability: a scoping review.

BACKGROUND: Traumatic anterior shoulder instability (TASI) accounts for 95% of glenohumeral dislocations and is associated with soft tissue and bony pathoanatomies. Non-operative treatments include slings, bracing and physiotherapy. Operative treatment is common, including bony and soft-tissue reconstructions performed through open or arthroscopic approaches. There is management variation in patient pathways for TASI including when to refer and when to operate. METHODS: A scoping review of systematic reviews, randomised controlled trials, comparing operative with non-operative treatments and different operative treatments were the methods followed. Search was conducted for online bibliographic databases and reference lists of relevant articles from 2002 to 2012. Systematic reviews were appraised using AMSTAR (assessment of multiple systematic reviews) criteria. Controlled trials were appraised using the CONSORT (consolidation of standards of reporting trials) tool. RESULTS: Analysis of the reviews did not offer strong evidence for a best treatment option for TASI. No studies directly compare open, arthroscopic and structured rehabilitation programmes. Evaluation of arthroscopic studies and comparison to open procedures was difficult, as many of the arthroscopic techniques included are no longer used. Recurrence rate was generally considered the best measure of operative success, but was poorly documented throughout all studies. There was conflicting evidence on the optimal timing of intervention and no consensus on any scoring system or outcome measure. CONCLUSIONS: There is no agreement about which validated outcome tool should be used for assessing shoulder instability in patients. There is limited evidence regarding the comparative effectiveness of surgical and non-surgical treatment of TASI, including a lack of evidence regarding the optimal timing of such treatments. There is a need for a well-structured randomised control trial to assess the efficacy of surgical and non-surgical interventions for this common type of shoulder instability.

Validating a global rating scale to monitor individual resident learning curves during arthroscopic knee meniscal repair.

PURPOSE: To determine whether a global rating scale (GRS) with construct validity can also be used to assess the learning curve of individual orthopaedic trainees during simulated arthroscopic knee meniscal repair. METHODS: An established arthroscopic GRS was used to evaluate the technical skill of 19 orthopaedic residents performing a standardized arthroscopic meniscal repair in a bioskills laboratory. The residents had diagnostic knee arthroscopy experience but no experience with arthroscopic meniscal repair. Residents were videotaped performing an arthroscopic meniscal repair on 12 separate occasions. Their performance was assessed by use of the GRS and motion analysis objectively measuring the time taken to complete tasks, path length of the subject's hands, and number of hand movements. One author assessed all 228 videos, whereas 2 other authors rated 34 randomly selected videos, testing the interobserver reliability of the GRS. The validity of the GRS was tested against the motion analysis. RESULTS: Objective assessment with motion analysis defined the surgeon's learning curve, showing significant improvement by each subject over 12 episodes (P < .0001). The GRS also showed a similar learning curve with significant improvements in performance (P < .0001). The median GRS score improved from 15 of 34 (interquartile range, 14 to 17) at baseline to 22 of 34 (interquartile range, 19 to 23) in the final period. There was a moderate correlation (P < .0001, Spearman test) between the GRS and motion analysis parameters (r = -0.58 for time, r = -0.58 for path length, and r = -0.51 for hand movements). The inter-rater reliability among 3 trained assessors using the GRS was excellent (Cronbach α = 0.88). CONCLUSIONS: When compared with motion analysis, an established arthroscopic GRS, with construct validity, also offers a moderately feasible method to monitor the learning curve of individual residents during simulated knee meniscal repair. CLINICAL RELEVANCE: An arthroscopic GRS can be used for monitoring skill improvement during knee meniscal repair and has the potential for use as a training and assessment tool in the real operating room.

Survivorship and risk factors for revision of metal-on-metal hip resurfacing.

Aims: Metal-on-metal hip resurfacing (MoM-HR) has seen decreased usage due to safety and longevity concerns. Joint registries have highlighted the risks in females, smaller hips, and hip dysplasia. This study aimed to identify if reported risk factors are linked to revision in a long-term follow-up of MoM-HR performed by a non-designer surgeon. Methods: A retrospective review of consecutive MoM hip arthroplasties (MoM-HRAs) using Birmingham Hip Resurfacing was conducted. Data on procedure side, indication, implant sizes and orientation, highest blood cobalt and chromium ion concentrations, and all-cause revision were collected from local and UK National Joint Registry records. Results: A total of 243 hips (205 patients (163 male, 80 female; mean age at surgery 55.3 years (range 25.7 to 75.3)) with MoM-HRA performed between April 2003 and October 2020 were included. Mean follow-up was 11.2 years (range 0.3 to 17.8). Osteoarthritis was the most common indication (93.8%), and 13 hips (5.3%; 7M:6F) showed dysplasia (lateral centre-edge angle < 25°). Acetabular cups were implanted at a median of 45.4° abduction (interquartile range 41.9° - 48.3°) and stems neutral or valgus to the native neck-shaft angle. In all, 11 hips (4.5%; one male, ten females) in ten patients underwent revision surgery at a mean of 7.4 years (range 2.8 to 14.2), giving a cumulative survival rate of 94.8% (95% confidence interval (CI) 91.6% to 98.0%) at ten years, and 93.4% (95% CI 89.3% to 97.6%) at 17 years. For aseptic revision, male survivorship was 100% at 17 years, and 89.6% (95% CI 83.1% to 96.7%) at ten and 17 years for females. Increased metal ion levels were implicated in 50% of female revisions, with the remaining being revised for unexplained pain or avascular necrosis. Conclusion: The Birmingham MoM-HR showed 100% survivorship in males, exceeding the National Institute for Health and Care Excellence '5% at ten years' threshold. Female sex and small component sizes are independent risk factors. Dysplasia alone is not a contraindication to resurfacing.

5 year follow up of a hydroxyapatite coated short stem femoral component for hip arthroplasty: a prospective multicentre study.

Short stem, uncemented femoral implants for hip arthroplasty are bone conserving achieving stability through initial metaphyseal press-fit and biological fixation. This study aimed to evaluate the survivorship, mid-term function and health related quality of life outcomes in patients who have undergone total hip arthroplasty (THA) with a fully hydroxyapatite coated straight short stem femoral component with up to 5 years follow-up. 668 patients were recruited to a multicentre study investigating the performance of the cementless Furlong Evolution® stem for THA. 137 patients withdrew at various time points. The mean follow-up was 49 months. Clinical (Harris Hip Score (HHS), radiographic and patient-reported outcome measures-Oxford Hip Score (OHS) and EuroQol 5D (EQ-5D), were recorded pre-operatively and at 6 weeks, 6 months, 1 year, 3 year and 5 year follow ups. At 5-year follow-up, 12 patients underwent revision surgery, representing a cumulative revision rate of 1.8%. Median OHS, HHS and EQ5D scores improved significantly: OHS improved from a pre-operative median of 21 (IQR 14-26) to 47 (IQR 44-48) (p < 0.001). HHS improved from 52 (IQR 40-63) to 98 (IQR 92-100) (p < 0.001) and EQ5D improved from 70 (IQR 50-80) to 85 (IQR 75-95) (p < 0.001). This fully HA-coated straight short femoral stem implant demonstrated acceptable mid-term survivorship and delivered substantial improvements in function and quality of life after THA.

Low dose CT-based spatial analysis (CTSA) to measure implant migration after ceramic hip resurfacing arthroplasty (HRA): A phantom study.

Implant migration is a predictor of arthroplasty survivorship. It is crucial to monitor the migration of novel hip prostheses within premarket clinical investigations. RSA is the gold standard method, but requires calibrated radiographs using specialised equipment. A commercial computed tomography micromotion analysis solution is a promising alternative but is not yet available for use with monobloc ceramic implants. This study aimed to develop and validate a CT-based spatial analysis (CTSA) method for use with ceramic implants. A phantom study was undertaken to assess accuracy and precision. A ceramic hip resurfacing arthroplasty (HRA) and 20 tantalum beads were implanted into a synthetic hip model and mounted onto a 6-degree of freedom motion stage. The hip was repeatedly scanned with a low dose CT protocol, with imposed micromovements. Data were interrogated using a semiautomated technique. The effective radiation dose for each scan was estimated to be 0.25 mSv. For the head implant, precision ranged between 0.11 and 0.28 mm for translations and 0.34°-0.42° for rotations. For the cup implant, precision ranged between 0.08 and 0.11 mm and 0.19° and 0.42°. For the head, accuracy ranged between 0.04 and 0.18 mm for translations and 0.28°-0.46° for rotations. For the cup, accuracy ranged between 0.04 and 0.08 mm and 0.17° and 0.43°. This in vitro study demonstrates that low dose CTSA of a ceramic HRA is similar in accuracy to RSA. CT is ubiquitous, and this method may be an alternative to RSA to measure prosthesis migration.

Three-Dimensional Preoperative Planning Software for Hip Resurfacing Arthroplasty.

Three-dimensional planning of hip arthroplasty is associated with better visualisation of anatomical landmarks and enhanced mapping for preoperative implant sizing, which can lead to a decrease in surgical time and complications. Despite the advantages of hip resurfacing arthroplasty (HRA), it is considered a technically challenging procedure and associated with inaccurate implant placement. This study aimed to examine the validity, reliability, and usability of preoperative 3D Hip Planner software for HRA. Fifty random cases of various hip osteoarthritis severity were planned twice by two junior trainees using the 3D Hip Planner within a one-month interval. Outcome measures included femoral/cup implant size, stem-shaft angle, and cup inclination angle, and were assessed by comparing outcomes from 2D and 3D planning. An adapted unified theory of acceptance and use of technology (UTAUT) survey was used for software usability. Bland-Altman plots between 3D and 2D planning for stem-shaft and inclination angles showed mean differences of 0.7 and -0.6, respectively (r = 0.93, p < 0.001). Stem-shaft and inclination angles showed inter-rater reliability biases of around -2° and 3°, respectively. Chi-square and Pearson's correlation for femoral implant size showed a significant association between the two assessors (r = 0.91, p < 0.001). The 3D test-retest coefficient of repeatability for stem-shaft and inclination angles were around ±2° and ±3°, respectively, with a strong significant association for femoral implant size (r = 0.98, p < 0.001). Survey analyses showed that 70-90% agreed that 3D planning improved expectancy in four domains. 3D hip planner appears to be valid and reliable in preoperative HRA and shows significant potential in optimising the quality and accuracy of surgical planning.

The metabolic equivalent of task score : a useful metric for comparing high-functioning hip arthroplasty patients.

AIMS: This study investigates the use of the metabolic equivalent of task (MET) score in a young hip arthroplasty population, and its ability to capture additional benefit beyond the ceiling effect of conventional patient-reported outcome measures. METHODS: From our electronic database of 751 hip arthroplasty procedures, 221 patients were included. Patients were excluded if they had revision surgery, an alternative hip procedure, or incomplete data either preoperatively or at one-year follow-up. Included patients had a mean age of 59.4 years (SD 11.3) and 54.3% were male, incorporating 117 primary total hip and 104 hip resurfacing arthroplasty operations. Oxford Hip Score (OHS), EuroQol five-dimension questionnaire (EQ-5D), and the MET were recorded preoperatively and at one-year follow-up. The distribution was examined reporting the presence of ceiling and floor effects. Validity was assessed correlating the MET with the other scores using Spearman's rank correlation coefficient and determining responsiveness. A subgroup of 93 patients scoring 48/48 on the OHS were analyzed by age, sex, BMI, and preoperative MET using the other metrics to determine if differences could be established despite scoring identically on the OHS. RESULTS: Postoperatively the OHS and EQ-5D demonstrate considerable negatively skewed distributions with ceiling effects of 41.6% and 53.8%, respectively. The MET was normally distributed postoperatively with no relevant ceiling effect. Weak-to-moderate significant correlations were found between the MET and the other two metrics. In the 48/48 subgroup, no differences were found comparing groups with the EQ-5D, however significantly higher mean MET scores were demonstrated for patients aged < 60 years (12.7 (SD 4.7) vs 10.6 (SD 2.4), p = 0.008), male patients (12.5 (SD 4.5) vs 10.8 (SD 2.8), p = 0.024), and those with preoperative MET scores > 6 (12.6 (SD 4.2) vs 11.0 (SD 3.3), p = 0.040). CONCLUSION: The MET is normally distributed in patients following hip arthroplasty, recording levels of activity which are undetectable using the OHS. Cite this article: Bone Joint Res 2022;11(5):317-326.

A Delphi consensus statement for digital surgery.

The use of digital technology is increasing rapidly across surgical specialities, yet there is no consensus for the term 'digital surgery'. This is critical as digital health technologies present technical, governance, and legal challenges which are unique to the surgeon and surgical patient. We aim to define the term digital surgery and the ethical issues surrounding its clinical application, and to identify barriers and research goals for future practice. 38 international experts, across the fields of surgery, AI, industry, law, ethics and policy, participated in a four-round Delphi exercise. Issues were generated by an expert panel and public panel through a scoping questionnaire around key themes identified from the literature and voted upon in two subsequent questionnaire rounds. Consensus was defined if >70% of the panel deemed the statement important and <30% unimportant. A final online meeting was held to discuss consensus statements. The definition of digital surgery as the use of technology for the enhancement of preoperative planning, surgical performance, therapeutic support, or training, to improve outcomes and reduce harm achieved 100% consensus agreement. We highlight key ethical issues concerning data, privacy, confidentiality and public trust, consent, law, litigation and liability, and commercial partnerships within digital surgery and identify barriers and research goals for future practice. Developers and users of digital surgery must not only have an awareness of the ethical issues surrounding digital applications in healthcare, but also the ethical considerations unique to digital surgery. Future research into these issues must involve all digital surgery stakeholders including patients.

Calipered kinematic alignment technique for implanting a Medial Oxford®: A technical note.

This note describes a surgical technique to kinematically align a medial Oxford® UKA. Applying kinematic alignment principles is an alternative, personalised, physiological, and potentially clinically advantageous method for implanting the medial Oxford® UKA. Further investigations are needed to better define the reproducibility and clinical impact of this new surgical technique.

Cognitive task analysis-based training in surgery: a meta-analysis.

BACKGROUND: Reduced hands-on operating experience has challenged the development of complex decision-making skills for modern surgical trainees. Cognitive task analysis- (CTA-)based training is a methodical solution to extract the intricate cognitive processes of experts and impart this information to novices. Its use has been successful in high-risk industries such as the military and aviation, though its application for learning surgery is more recent. This systematic review aims to synthesize the evidence evaluating the efficacy of CTA-based training to enable surgeons to acquire procedural skills and knowledge. METHODS: The PRISMA guidelines were followed. Four databases, including MEDLINE, EMBASE, Web of Science and Cochrane CENTRAL, were searched from inception to February 2021. Randomized controlled trials and observational studies evaluating the training effect of CTA-based interventions on novices' procedural knowledge or technical performance were included. Meta-analyses were performed using a random-effects model. RESULTS: The initial search yielded 2205 articles, with 12 meeting the full inclusion criteria. Seven studies used surgical trainees as study subjects, four used medical students and one study used a combination. Surgical trainees enrolled into CTA-based training groups had enhanced procedural knowledge (standardized mean difference (SMD) 1.36 (95 per cent c.i. 0.67 to 2.05), P < 0.001) and superior technical performance (SMD 2.06 (95 per cent c.i. 1.17 to 2.96), P < 0.001) in comparison with groups that used conventional training methods. CONCLUSION: CTA-based training is an effective way to learn the cognitive skills of a surgical procedure, making it a useful adjunct to current surgical training.

How to prioritize patients and redesign care to safely resume planned surgery during the COVID-19 pandemic.

AIMS: Restarting planned surgery during the COVID-19 pandemic is a clinical and societal priority, but it is unknown whether it can be done safely and include high-risk or complex cases. We developed a Surgical Prioritization and Allocation Guide (SPAG). Here, we validate its effectiveness and safety in COVID-free sites. METHODS: A multidisciplinary surgical prioritization committee developed the SPAG, incorporating procedural urgency, shared decision-making, patient safety, and biopsychosocial factors; and applied it to 1,142 adult patients awaiting orthopaedic surgery. Patients were stratified into four priority groups and underwent surgery at three COVID-free sites, including one with access to a high dependency unit (HDU) or intensive care unit (ICU) and specialist resources. Safety was assessed by the number of patients requiring inpatient postoperative HDU/ICU admission, contracting COVID-19 within 14 days postoperatively, and mortality within 30 days postoperatively. RESULTS: A total of 1,142 patients were included, 47 declined surgery, and 110 were deemed high-risk or requiring specialist resources. In the ten-week study period, 28 high-risk patients underwent surgery, during which 68% (13/19) of Priority 2 (P2, surgery within one month) patients underwent surgery, and 15% (3/20) of P3 (< three months) and 16% (11/71) of P4 (> three months) groups. Of the 1,032 low-risk patients, 322 patients underwent surgery. Overall, 21 P3 and P4 patients were expedited to 'Urgent' based on biopsychosocial factors identified by the SPAG. During the study period, 91% (19/21) of the Urgent group, 52% (49/95) of P2, 36% (70/196) of P3, and 26% (184/720) of P4 underwent surgery. No patients died or were admitted to HDU/ICU, or contracted COVID-19. CONCLUSION: Our widely generalizable model enabled the restart of planned surgery during the COVID-19 pandemic, without compromising patient safety or excluding high-risk or complex cases. Patients classified as Urgent or P2 were most likely to undergo surgery, including those deemed high-risk. This model, which includes assessment of biopsychosocial factors alongside disease severity, can assist in equitably prioritizing the substantial list of patients now awaiting planned orthopaedic surgery worldwide. Cite this article: Bone Jt Open 2021;2(2):134-140.

Cams and pincer impingement are distinct, not mixed: the acetabular pathomorphology of femoroacetabular impingement.

BACKGROUND: Many impinging hips are said to have a mix of features of femoral cam and an overcovered acetabulum causing pincer impingement. Correction of such a mixed picture by reduction of the cam lesion and the acetabular rim is the suggested treatment. QUESTIONS/PURPOSES: We therefore asked two questions: (1) Is the acetabulum in cam impingement easily distinguishable from the pincer acetabulum, or is there a group with features of both types of impingement? (2) Is version or depth of socket better able to distinguish cam from pincer impingement? METHODS: We analyzed the morphologic features of the acetabulum and rim profile of 20 normal, healthy hips, 20 with cams and 20 with pincers on CT. Pelvises were digitized, orientated to the best-fit acetabular plane, and a rim profile was plotted. RESULTS: Cam hips were shallower than normal hips, which in turn were shallower than pincer hips (84 degrees +/- 5 degrees versus 87 degrees +/- 4 degrees versus 96 degrees +/- 5 degrees, respectively). The rim planes of cam, normal, and pincer hips had similar version (23 degrees, 24 degrees, 25 degrees), but females were 4 degrees more anteverted than males. CONCLUSIONS: We concluded cam and pincer hips are distinct pathoanatomic entities. Cam hips are slightly shallower than normal, whereas pincers are deeper. CLINICAL RELEVANCE: Before performing surgery for cam-type femoroacetabular impingement, surgeons should consider measuring the acetabular depth. The cam acetabulum is shallower than normal and may be rendered pathologically shallow by acetabular rim resection leading to early joint failure.

An analysis of the posterior cruciate ligament isometric position using an in vivo 3-dimensional computed tomography-based knee joint model.

PURPOSE: This study aimed to review the isometric point of the posterior cruciate ligament (PCL) based on insertional locations identified in recent anatomic studies by use of a 3-dimensional knee model. METHODS: Ten living subjects with healthy knees were evaluated. High-resolution computed tomography scans were performed at 3 positions of 0°, 90°, and 135°, and 3-dimensional knee images were constructed. Customized software was used to define tibial and femoral insertion points of the PCL, based on recently described anatomy. The femoral attachment site of the PCL was divided into 4 sectors (labeled A through D), and the tibial attachment site was divided into 6 sectors (labeled 1 through 6). Twenty-four virtual PCL bundles were created between these sectors, and their length was measured in the 3 knee flexion positions. RESULTS: In 0° and 90° of knee flexion, the virtual bundle showing the least amount of length change (1.10 ± 0.66 mm) was at sector D-6, that is, a posteromedial bundle inserting into the most posterior femoral sector (sector D) and the most distal tibial sector (sector 6). This change was not significantly different compared with all other virtual bundles with tibial points connected to femoral sector D (P > .05). An isometric position for the PCL (length change <2 mm) could not be found in 135° of knee flexion because of lengthening of all virtual bundles. CONCLUSIONS: Our data suggest that the femoral attachment point is more important than the tibial attachment point: any of the 6 tibial bundles attached to the most posterior femoral sector had similar isometric properties. CLINICAL RELEVANCE: Reproducing normal tibial and femoral anatomy underpins PCL surgical reconstruction. These findings suggest that to perform an isometrically accurate PCL reconstruction, particular attention should be paid to the location of the femoral attachment site, once the tibial footprint has been established. There were no isometric points in any virtual PCL bundle in the fully flexed knee because of excessive lengthening. Therefore, to avoid lengthening of the reconstructed graft, we recommend that fixation is performed at knee flexion angles between 0° and 90° and that patients avoid high flexion during postoperative rehabilitation.

Tibial Plateau Fracture: Anatomy, Diagnosis and Management.

Tibial plateau fractures are peri-articular knee fractures of the proximal tibia. The presentation is dependent on the mechanism of injury. The tibial plateau is the bony platform of the distal half of the knee joint, and is made up of a medial and lateral condyle separated by the intercondylar eminence. The presentation of tibial plateau fractures can vary greatly as a result of the bimodal mechanism of injury and patient characteristics. The patient should be assessed for life- and limb-threatening injuries in accordance with British Orthopaedic Association Standards of Trauma guidelines. Imaging is undertaken to understand configuration of the fracture, which is classified by the Schatzker classification. Definitive management of the fracture depends on the severity, ranging from conservative to surgical management. Surgery is required for more severe tibial plateau fractures to restore articular congruity, mechanical alignment, ligamentous stability and to permit early mobilisation. Medium-term functional outcome after tibial plateau fractures is generally excellent when anatomy and stability is restored. At least half of patients return to their original level of physical activity. Surgical management of tibial plateau fractures is not without complication. Risk factors include postoperative arthritis, bicondylar and comminuted fractures, meniscal removal, instability, malalignment and articular incongruity. Tibial plateau fractures account for 1% of all fractures, and typically occur either as a fragility fracture or secondary to a high-energy impact. These latter injuries are associated with extensive soft tissue injury, life- and limb-threatening complications and long-term sequelae. While outcomes are generally good, severe injuries are at higher risk of infection and post-traumatic arthritis requiring knee arthroplasty. This article considers the anatomy, diagnosis and evidence-based management strategies for tibial plateau fracture.