Morpho-functional effects of different universal dental adhesives on human gingival fibroblasts: an in vitro study.

To analyze the effects of four universal adhesives (Optibond Solo Plus-OB, Universal Bond-UB, Prime&Bond Active-PBA, FuturaBond M + -FB) on human gingival fibroblasts in terms of cytotoxicity, morphology and function. After in vitro exposure for up to 48 h, fibroblast viability was determined by the MTT assay determined, morphology by phase-contrast microscopy and migration by the scratch wound assay. Expression levels of IL1ß, IL6, IL8, IL10, TNFα and VEGF genes were assessed by RT-PCR and their protein production by Western blot analysis. Apoptosis and cell cycle were analyzed by flow cytometry. OB and UB induced early morphological changes on fibroblasts (3 h) with extended cell death at 24 h/48 h. Gene expression of collagen type I and fibronectin increased fivefold compared with controls, elastin disappeared and elastase increased threefold, indicating gingival tissue tended to become fibrotic. Only UB and OB increased gene expression of inflammatory markers: IL1ß at 3 and 48 h (up to about three times), IL6 and IL8 at 3 h (up to almost four times) which corresponded to the increase of the activated form NF-kB. All adhesives showed an effect on the functionality of fibroblasts with cytotoxic effect time and concentration dependent. Among all the OB and UB adhesives, they showed the greatest cell damage. The in-depth analysis of the effects of universal adhesives and possible functional effects represents an important information for the clinician towards choosing the most suitable adhesive system.

Lasers for caries removal in deciduous and permanent teeth.

BACKGROUND: Despite considerable improvements in oral health, dental caries continue to be a public health issue. The most frequently used, and universally accepted technique, to remove caries is through mechanical ablation of decayed tissues by means of rotating drills (diamond or tungsten carbide, or both). In the past few decades, the introduction of adhesive filling materials (resin composites) has affected cavity filling procedures by reducing its retention needs, with advantages for dental tissue conservation. Consequently, new minimally invasive strategies were introduced into dental practice, such as the use of lasers to perform highly controlled tissue ablation. Laser use has also raised expectations of limiting pain and discomfort compared to using drills, as well as overcoming drill phobia. OBJECTIVES: The main objective of the review was to compare the effects of laser-based methods to conventional mechanical methods for removing dental caries in deciduous and permanent teeth. SEARCH METHODS: We searched the following electronic databases: Cochrane Oral Health's Trials Register (searched 22 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 22 June 2016), MEDLINE Ovid (1946 to 22 June 2016), Embase Ovid (1980 to 22 June 2016), ProQuest Dissertations and Theses (1980 to 22 June 2016), Zetoc (limited to conference proceedings) (1993 to 22 June 2016), and ISI Web of Knowledge (limited to conference proceedings) (1990 to 22 June 2016). We checked the reference lists of relevant articles to identify additional studies. We searched the US National Institutes of Health Ongoing Trials Register ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. SELECTION CRITERIA: We included randomised controlled trials, split-mouth trials and cluster-randomised trials (irrespective of their language) comparing laser therapy to drill ablation of caries. We included participants of any age (children, adolescents and adults). DATA COLLECTION AND ANALYSIS: Two review authors independently screened titles and abstracts of citations identified by the review search strategy. Two review authors independently evaluated the full text of relevant primary studies, assessed risk of bias and extracted data. We used standard methodological procedures expected by Cochrane. MAIN RESULTS: We included nine randomised trials, published between 1998 and 2014, involving 662 participants. The population consisted of both children and adolescents in four trials, only adults in four trials, and both children/adolescents and adults in one trial. Four studies examined only permanent teeth, and five studies evaluated both deciduous and permanent teeth. Six trials used Er:YAG (erbium-doped yttrium aluminium garnet) lasers, two trials employed Er,Cr:YSGG (erbium, chromium: yttrium-scandium-gallium-garnet) lasers, and one trial used Nd:YAG (neodymium-doped yttrium aluminium garnet) laser.Overall, the trials had small sample sizes, and the majority were at unclear or high risk of bias. The primary outcomes were evaluated in a limited number of trials (removal of caries (four trials (but only two reported quantitative data)); episodes of pain (five studies)). There was insufficient evidence to suggest that either lasers or drill were better at caries removal (risk ratio (RR) 1.00, 95% confidence interval (CI) 0.99 to 1.01; 2 studies; 256 treated caries; P = 0.75; I2 = 0%; low-quality evidence).The incidence of moderate or high pain was greater in the drill group compared to the laser group (RR 0.40, 95% CI 0.28 to 0.57; 2 studies; 143 participants; P < 0.001; I2 = 50%). Similarly, the need for anaesthesia was significantly higher in the drill group than in the laser group (RR 0.25, 95% CI 0.10 to 0.65; 3 studies; 217 children/adolescents; P = 0.004; I2 = 0%).In terms of marginal integrity of restoration, there was no evidence of a difference between laser and drill comparisons evaluated at 6 months (RR 1.00, 95% CI 0.21 to 4.78; 3 studies), 1 year (RR 1.59, 95% CI 0.34 to 7.38; 2 studies), or 2 years (RR 1.00, 95% CI 0.21 to 4.74; 1 study).There was no evidence of a difference for durability of restoration between laser therapy or drill at 6 months' follow-up (RR 2.40, 95% CI 0.65 to 8.77; 4 studies), at 1 year (RR 1.40, 95% CI 0.29 to 6.78; 2 studies) or at 2 years' follow-up (RR 0.50, 95% CI 0.02 to 14.60; 1 study).Only two trials investigated the recurrence of caries, but no events occurred during 6 months' follow-up.There was insufficient evidence of a difference between laser or drill in terms of pulpal inflammation or necrosis at 1 week (RR 1.51, 95% CI 0.26 to 8.75; 3 studies) and at 6 months (RR 0.99, 95% CI 0.10 to 9.41; 2 studies). AUTHORS' CONCLUSIONS: Given the low quality of the body of evidence, we concluded that evidence was insufficient to support the use of laser as an alternative to traditional drill therapy for caries removal. We found some evidence in favour of laser therapy for pain control, need of anaesthesia and patient discomfort, but, again, the body of evidence was of low quality. Additional well-designed, randomised trials investigating the most relevant outcomes are needed.

Fonseca's Questionnaire Is a Useful Tool for Carrying Out the Initial Evaluation of Temporomandibular Disorders in Dental Students.

Background: Temporomandibular disorders (TMDs) represent a prevalent multifactorial condition that impacts a significant portion of the global population. The objective of this study was to employ Fonseca's questionnaire for an initial assessment of TMDs. Methods: A cross-sectional study was conducted on a sample of 250 undergraduates from the Dental School of the University of Perugia, Italy. The chi-square test, with a significance level set at p < 0.05, was used to evaluate a statistically significant relationship between TMDs and several variables such as gender, age, employed/unemployed, and physically active or not. Results: The data obtained through the questionnaire indicated that a considerable percentage of students (78%) exhibited signs consistent with TMDs. The most frequently reported signs and symptoms included psychological stress (49.6%), dental clenching and grinding (34%), joint clicking (33.6%), frequent headaches (15.2%), and neck pain (23.2%). Notably, when considering moderate to severe symptoms of TMDs, females were more significantly affected than males. Furthermore, factors such as age, employment status, and physical activity did not appear to influence the prevalence of TMDs. Conclusions: The high prevalence of TMDs identified within this young population (university students), as measured by this questionnaire (albeit warranting validation through more rigorous methodologies) underscores the necessity for the implementation of new preventive strategies that specifically address this demographic.

An evaluation of the Invisalign® Aligner Technique and consideration of the force system: a systematic review.

OBJECTIVE: Since its introduction 25 years ago, the Invisalign® system has undergone multiple digital and biomechanical evolutions and its effectiveness is often compared to traditional systems without considering the many differences which characterize them. The main aim of this systematic review is to look at the literature dealing with studies on teeth movements using the Invisalign® system and the management of these movements through digital planning and artificial intelligence. MATERIALS AND METHODS: The following electronic databases were searched: MEDLINE, Embase, the Cochrane Oral Health Group's Trials Register, and CENTRAL. Unpublished studies were searched on ClinicalTrials.gov, the National Research Register, and Pro-Quest Dissertation Abstracts and Thesis database. RESULTS: Twenty-four studies (15 retrospective, 5 prospective, 2 pilot, and 2 case-control) were included. The results of the analysis carried out on the available literature show that the Invisalign® system is recognized to be a valid alternative to conventional orthodontic treatment in no-extraction cases. The results are influenced by the methods for assessing the effectiveness of this technique and by the comparison bias of the traditional system with the innovative digital system. CONCLUSIONS: Since the introduction of SmartForce and SmartTrack material, the efficacy of the treatment has improved. There is still a shortage of high-quality evidence concerning the treatment modality. In order to make the treatment with the aligners more efficient, a correct management of the ClinCheck® software and a proper use of the biomechanics are necessary. The aligned force-driven system should be taken into account when developing the digital planning.

In Vitro effects of alternative smoking devices on oral cells: Electronic cigarette and heated tobacco product versus tobacco smoke.

OBJECTIVE: To investigate the biological effects of electronic cigarette (e-cigarette) and heated tobacco product extracts respect to tobacco smoke extract on human gingival fibroblasts and human oral keratinocytes analysing cell viability, morphology, migration, apoptosis, cell cycle and epithelial-mesenchymal transition (EMT). DESIGN: Human gingival fibroblasts and human oral keratinocytes viability was analysed by MTT assay, cell morphology using scanning electron microscope (SEM) and cell migration by Scratch assay, a method that mimics the cell migration during wound healing in vivo. Apoptosis and cell cycle were analysed with flow cytometry and the related-gene expression of TP53, BCL2, CDKN2A and CDKN1A was indagated using real-time polymerase chain reaction. EMT process was analysed through expression of specific markers: CDH1, SNAI2, TWIST1, MMP2, FN1 and VIM. All investigations were evaluated after 24 h an in vitro exposure. RESULTS: Undiluted tobacco smoke extract induced significant inhibition of cell viability and cell migration, caused morphological alterations and induced an increase in cell death. No alterations or damage were observed after treatment with e-cigarette extracts. Heated tobacco product extract induced proliferation as highlighted by an increase of cell viability, cell migration and alterations of cycle analysis. CONCLUSIONS: Comparing the different cigarette extracts, tobacco smoke turns out to be the most harmful, e-cigarette did not determine morphological and functional alterations and heated tobacco product must be carefully investigated for its possible clinical effects on oral cell populations.

Systematic Review of the Literature on Dental Caries and Periodontal Disease in Socio-Economically Disadvantaged Individuals.

Dental caries and periodontal disease represent a health problem and a social cost for the entire population, and in particular for socio-economically disadvantaged individuals who are less resistant to disease. The aim of this review is to estimate the prevalence and severity of the two dental pathologies, caries and periodontal disease, in the different classes of socio-economically disadvantaged subjects and to understand which of them are most affected. A systematic search of the literature was performed in MEDLINE (via PubMed), EMBASE and Web of Science after establishing a suitable search strategy for each database, using keywords related to socio-economically vulnerable classes and health outcomes. Socio-economically disadvantaged individuals are more susceptible to tooth decay and periodontal disease (with relative tooth loss) than non-vulnerable people. Additionally, when multiple vulnerabilities are combined in the same subject, these oral diseases worsen. There is no type of vulnerability more affected by caries and periodontitis than others, since overall they all have severe disease indices. The data from this systematic literature review might be useful for health policy makers looking to allocate more resources and services to socially disadvantaged individuals, resulting in making them more resilient to oral disease due to their social marginalization.

Bio-mechanical characterization of a CAD/CAM PMMA resin for digital removable prostheses.

OBJECTIVE: To compare the mechanical and biological features of a polymethylmethacrylate (PMMA) disc for CAD/CAM prostheses (test samples, TG) with a traditional resin (control samples, CG). METHODS: Mechanical analysis was performed using Dynamic Mechanical Analysis (DMA) and Brillouin's micro-spectroscopy. Human keratinocyte morphology and adhesion were analyzed by scanning electronic microscopy (SEM), cytotoxicity by the MTT assay, apoptosis by flow cytometry and p53, p21 and bcl2 gene expression by real time PCR. RESULTS: TG exhibited a higher elastic modulus than CG (range 5100-5500 ± 114.3 MPa vs 3000-3300 ± 99.97 MPa). The Brillouin frequency was found at ωB= (15.50 ± 0.05) GHz for TG and at ωB_1 = (15.50 ± 0.05) GHz and ωB_2 = (15.0 ± 0.1) GHz for CG where two peaks were always present independently of the sample point. SEM analysis revealed that keratinocytes on TG disks appeared to be flattened with lamellipodia. Keratinocytes on CG disks rose above the substrate with cytoplasmatic filaments. MTT viability data at 3 h and 24 h showed TG was significantly less cytotoxic than CG (p < 0.001). No significant differences emerged in apoptosis on CG and TG. Real-time PCR showed p53 expression increased after 3 h by about 9-fold in keratinocytes on TG (p < 0.001) and about 5-fold in those on CG (p < 0.001). High p53 expression persisted after 24 h on both disks. No significant variations were observed in p21 and bcl2 expression at any time-point. SIGNIFICANCE: PMMA resins, as used in CAD/CAM technology, displayed suitable biocompatible and mechanical properties for removable prostheses.

Model for Taking Care of Patients with Early Childhood Caries during the SARS-Cov-2 Pandemic.

Pending the availability of vaccines to contain the SARS-CoV-2 pandemic, the current solution is "social distancing" with a reduction of dental treatments to those assessed as urgent and emergency cases. These treatments also involve Early Childhood Caries (ECC) due to the fact that this disease affects preschool children (a vulnerable population) and, in addition, shows a propensity to evolve into more serious complications (dental pain, infections). A narrative review was carried out to support a protocol for treating ECC with efficacious and safe (in terms of SARS-CoV-2 transmission) procedures. Protocol involves criteria for patients' selection remotely (telemedicine), and well-detailed criteria/equipment and hygiene procedures to combat against SARS-CoV-2 transmission. Moreover, the protocol proposes innovative caries treatments, named Minimally Invasive Treatments (MITs), well known in pedodontics for their high level of children's acceptance during dental care. MITs allow for caries removal (particularly in primary teeth) without any high-speed rotating instrument cooled with nebulized air-water spray (with high risk of virus environmental diffusion), usually adopted during traditional treatments. For evaluating MITs effectiveness in caries management, only Systematic Review and Randomized Controlled Trials (RCTs) were included in our study, without any risk of bias assessment. The indications proposed in this protocol could support clinicians for the temporary management of ECC until the SARS-CoV-2 pandemic ends.

Lasers to prevent dental caries: a systematic review.

OBJECTIVE: To assess the effectiveness of lasers (at sub-ablative parameters) in reducing caries incidence compared with traditional prophylactic interventions (TPIs) when used alone or together with other TPIs such as pits and fissures sealant or fluoride gels or varnishes. DESIGN: A systematic review. Data sources include Medline (via PubMed), Embase, Web of Science and the Cochrane Library (December 2019). ELIGIBILITY CRITERIA: Only randomised trials (RCTs) and controlled clinical trials (CCTs) dealing with prophylactic lasers use (vs TPI or untreated teeth) were considered as eligible. We excluded in vitro and ex vivo studies. DATA EXTRACTION: Eligible studies were selected and data extracted independently by two reviewers. Risk of bias was assessed adopting the Cochrane Risk of Bias tool. Data on caries incidence, sealant retention, fluoride uptake, adverse events, treatment duration, patients' discomfort and cost-effectiveness ratio was extracted. DATA ANALYSIS: Extracted data were presented narratively due to the heterogeneity of included studies. RESULTS: Seven RCTs and two CCTs, all with an evident risk of bias, met inclusion criteria, pooling together 269 individuals and 1628 teeth. CO2, neodymium-doped yttrium aluminium garnet, erbium-doped yttrium aluminum garnet (Er:YAG), erbium, chromium: yttrium scandium gallium garnet (Er,Cr:YSGG) and Argon lasers were used. In the permanent dentition, lasers only when used in combination with TPIs were effective in reducing caries when compared with untreated teeth (risk ratio (RR)=0.44 (0.20-0.97); Er:YAG laser) or with TPIs used alone (RR=0.39 (0.22-0.71); CO2 laser). Moreover, Argon laser significantly improved the fluoride uptake into the enamel surfaces (ANalysis Of VAriance (ANOVA) tests: 95%, p<0.0001). Likewise, sealant retention improved when acid etching was performed on previously irradiated enamel fissures by CO2 laser (RR=0.63 (0.38-1.04)) or Er:YAG laser (RR=0.54 (95% CI: 0.34 to 0.87)). In addition, laser resulted safe and well tolerated by patients. CONCLUSION: Despite some positive indications, an inadequate level of evidence was found in the included studies concerning the lasers' effectiveness in preventing caries. Further studies with a higher methodological quality level are required.

Oral Health Knowledge Level of Nursing Staff Working in Semi-Intensive Heart Failure Units.

PURPOSE: Critical care units, such as heart failure units, house inpatients with a compromised general health status that requires rigorous prevention of further complications. Oral health infections that gain access through the bloodstream or airway might represent such potential complications (eg, endocarditis pneumonia). Avoiding these critical occurrences requires that adequate oral health care be provided by nursing personnel. Here we assessed the knowledge of oral health care practices by nurses working in three Italian heart failure units in Umbria, Italy. DESIGN: This was a cross-sectional study. METHODS: Forty-four nurses were interviewed using a six-item modified Adams' questionnaire on the topic of oral health care. A multidisciplinary panel of experts established the criteria for answer correctness based on the most relevant dentistry literature evidence and judged each reply. The expected percentage of correctly replying nurses was 75%, and significant differences from this expected probability were calculated with one-sided binomial probability tests. Cronbach's α method was used to establish the questionnaire's internal consistency (reliability). RESULTS: For five out of six questionnaire items, the percentage of nurses who correctly answered was significantly lower than the expected value of probability. Lack of knowledge was found for usefulness of checking the patients' mouths (p=0.003), the most relevant lesions affecting the mouth (p=0.0001), the tools/solutions for cleaning the mouth and dentures (p= 0.0416), and drugs that affect the mouth and their side effects (p<0.0001). CONCLUSION: In this study, few nurses working in heart failure units showed both an adequate willingness to check inpatients and a good knowledge of oral health care (significantly lower than the expected 75%). Further studies that use validated questionnaires and include more participants should be conducted to confirm and elaborate on our preliminary data.

Biological effects of Cannabidiol on normal human healthy cell populations: Systematic review of the literature.

A systematic review was performed to evaluate the biological effects of Cannabidiol (CBD), one of the major components of Cannabis Sativa, on normal human healthy cell populations in terms of cell viability, proliferation, migration, apoptosis and inflammation. Inclusion criteria were: studies on cell lines and primary cell culture from healthy donors, CBD exposure as variable, no CBD exposure as control and published in English language. Quality assessment was based on ToxR tool, with a score of reliability ranging from 15 to 18.Following the PRISMA statement, three independent reviewers performed both a manual and an electronic search using MEDLINE via PubMed, Scopus, Web of Science and Cochrane. From a total of 9437eligible articles, 29 studies have been selected. The average quality assessment score was 16.48.Theresults showed heterogeneous CBD concentration exposure (0.01-50 µM or 0.1 nmol/mL-15 mg/mL). The definition of a threshold limit would allow the identification of specific effects on expected outcomes. From the data obtained CBD resulted to inhibit cell viability in a dose-dependent manner above 2 µM, while in oral cell populations the inhibitory concentration is higher than 10 µM. Moreover, it was observed a significantly inhibition of cell migration and proliferation. On the contrary, it was highlighted a stimulation of apoptosis only at high doses (from 10 µM).Finally, CBD produced an anti-inflammatory effect, with a reduction of the pro-inflammatory cytokine gene expression and secretion. CBD down-regulated ROS production, although at high concentrations (16 µM) increased ROS-related genes expression. The diffusion of CBD for therapeutic and recreational uses require a precise definition of its potential biological effects. A thorough knowledge of these aspects would allow a safe use of this substance without any possible side effects.

Validity of cerebrovascular ICD-9-CM codes in healthcare administrative databases. The Umbria Data-Value Project.

BACKGROUND: Validation of administrative databases for cerebrovascular diseases is crucial for epidemiological, outcome, and health services research. The aim of this study was to validate ICD-9 codes for hemorrhagic or ischemic stroke in administrative databases, to use them for a comprehensive assessment of the burden of disease in terms of major outcomes, such as mortality, hospital readmissions, and use of healthcare resources. METHODS: We considered the hospital discharge abstract database of the Umbria Region (890,000 residents). Source population was represented by patients aged >18 discharged from hospital with a diagnosis of hemorrhagic or ischemic stroke between 2012 and 2014 using ICD-9-CM codes in primary position. We randomly selected and reviewed medical charts of cases and non-cases from hospitals. For case ascertainment we considered symptoms and instrumental tests reported in the medical charts. Diagnostic accuracy measures were computed using 2x2 tables. RESULTS: We reviewed 767 medical charts for cases and 78 charts for non-cases. Diagnostic accuracy measures were: subarachnoid hemorrhage: sensitivity (SE) 100% (95% CI: 97%-100%), specificity (SP) 96% (90-99), positive predictive value (PPV) 98% (93-100), negative predictive value (NPV) 100% (95-100); intracerebral hemorrhage: SE 100% (97-100), SP 98% (91-100), PPV 98% (94-100), NPV 100% (95-100); other and unspecified intracranial hemorrhage: SE 100% (97-100), SP 96% (90-99), PPV 98% (93-100), NPV 100% (95-100); ischemic stroke due to occlusion and stenosis of precerebral arteries: SE 99% (94-100), SP 66 (57-75), PPV 70% (61-77), NPV 99% (93-100); occlusion of cerebral arteries: SE 100% (97-100), SP 87% (78-93), PPV 91% (84-95), NPV 100% (95-100); acute, but ill-defined, cerebrovascular disease: SE 100% (97-100), SP 78% (69-86), PPV % 83 (75-89), NPV 100% (95-100). CONCLUSIONS: Case ascertainment for both ischemic and hemorrhagic stroke showed good or high levels of accuracy within the regional healthcare databases in Umbria. This database can confidently be employed for epidemiological, outcome, and health services research related to any type of stroke.

Biological, thermal and mechanical characterization of modified glass ionomer cements: The role of nanohydroxyapatite, ciprofloxacin and zinc l-carnosine.

The study evaluated the effects of 4 wt% nanohydroxyapatite (HA), 6 wt% zinc l-carnosine (MDA) and 1.5 wt% Ciprofloxacin (AB) on the mechanical, thermal and biological properties of glass ionomer cements (GIC). Filler and additive concentrations were selected after a previous study had tested single components and different percentages. Specimens included five silicon molds of each GIC cement for all tests. They were stored at room temperature for 24 h from specimen collection to analysis. Mechanical tests, calorimetric analysis, morphological investigation, antibacterial and cell viability assays were conducted. One-way analysis of variance (ANOVA) was used for data analysis with significance set at p < 0.05. Adding HA, MDA and AB to GICs modified their thermal, mechanical and microbiological properties. Polymerization increased. A slight decrease in the compressive strength of modified GICs was observed in dry condition (p < 0.05). Cement extracts affected cell viability in relation to extract dilution. Mechanical behavior improved in modified glass ionomer cements, especially with the powder formulated antibiotic. Overall cytotoxicity was reduced. Therefore adding nanohydroxyapatite, antibiotic and a mucosal defensive agent to conventional glass ionomer cement in special need patients could improve the clinical, preventive and therapeutic performance of the cements, without altering their mechanical properties.

Cytotoxicity of universal dental adhesive systems: Assessment in vitro assays on human gingival fibroblasts.

Universal adhesives are the most important innovation in restorative dentistry. They are composed of different monomers, solvents and fillers. The potential cytotoxic effect of these materials is an important scientific aspect in recent literature. The aim of this study was to determine, using different in vitro techniques, the cytotoxicity evaluation of seven universal enamel-dental adhesives on human gingival fibroblasts. For this purpose, seven universal dental enamel adhesives have been evaluated by in vitro cytotoxicity tests using direct contact tests (an unpolymerized and a polymerized method) and an indirect contact test: preparation of extracts. The polymerized method showed a cytotoxicity range from 36% (G-PremioBond, GPB) to 79% (FuturaBond M+, FB). With the unpolymerized direct methods the range was from 4% (Prime&Bond Active, PBA) to 40% (Ibond Universal, IB) for undiluted adhesives; generally passing to the major dilutions the test showed a strong inhibitory activity by all the adhesives. Whereas with the indirect method by diluting the extracts of all dental adhesives the cell viability increased. The data obtained from the work has shown a lower cytotoxic effect of Optibond Solo Plus (OB) and Adhesive Universal (AU) with more reliable results with the extracts technique. The choice of reliable in vitro cytotoxic technique could represent, in dental practice, an important aid for clinical procedures in the use of adhesive systems.

A diagnostic accuracy study validating cardiovascular ICD-9-CM codes in healthcare administrative databases. The Umbria Data-Value Project.

BACKGROUND: Administrative healthcare databases are useful and inexpensive tools that can provide a comprehensive assessment of the burden of diseases in terms of major outcomes, such as mortality, hospital readmissions, and use of healthcare resources. However, a crucial issue is the reliability of information gathered. The aim of this study was to validate ICD-9 codes for several major cardiovascular conditions, i.e., acute myocardial infarction (AMI), atrial fibrillation/flutter (AF), and heart failure (HF), in order to use them for epidemiological, outcome, and health services research. METHODS: Data from the centralised administrative database of the Umbria Region (890,000 residents, located in Central Italy) were considered. Patients with a first hospital discharge for AMI, AF/flutter, and HF, between 2012 and 2014, were identified using ICD-9-CM codes in primary position. A sample of cases and non-cases was randomly selected, and the corresponding medical charts reviewed by specifically trained investigators. For each disease, case ascertainment was based on all clinical, laboratory, and instrumental examinations available in medical charts. Sensitivity, specificity, and predictive values with 95% confidence intervals (CIs), were calculated. RESULTS: We reviewed 458 medical charts, 128 for AMI, 127 for AF/flutter, 127 for HF, and 76 of non-cases for each condition. Diagnostic accuracy measures of the original discharge diagnosis were as follows. AMI: sensitivity 98% (95% CI, 94-100%), specificity 91% (95% CI, 83-97%), positive predictive value (PPV) 95% (95% CI, 89-98%), negative predictive value (NPV) 97% (95% CI, 91-100%). AF/flutter: sensitivity 95% (95% CI, 90-98%), specificity 95% (95% CI, 87-99%), PPV 97% (95% CI, 92-99%), NPV 92% (95% CI, 84-97%). HF: sensitivity 96% (95% CI, 91-99%), specificity 90% (95% CI, 81-96%), PPV 94% (95% CI, 88-97%), NPV 93% (95% CI, 85-98%). CONCLUSION: The case ascertainment for AMI, AF and flutter, and HF, showed a high level of accuracy (≥ 90%). The healthcare administrative database of the Umbria Region can be confidently used for epidemiological, outcome, and health services research.

Sonic and ultrasonic oscillating devices for the management of pain and dental fear in children or adolescents that require caries removal: a systematic review.

OBJECTIVES: To evaluate the effectiveness and degree of acceptance by children and adolescents of the use of oscillating tips compared with rotating drills. DESIGN: Systematic review. DATA SOURCES: PubMed, the Cochrane Central Register of Controlled Trials (CENTRAL), the Cochrane Library and Web of Science (October 2017). ELIGIBILITY CRITERIA: Controlled randomised or non-randomised trials that evaluated sonic and ultrasonic oscillating devices versus rotating drill. DATA EXTRACTION: Eligible studies were selected and data extracted independently by two reviewers. Risk of bias was assessed using the Cochrane Method. RESULTS: Two controlled clinical trials comprising 123 children aged 2-12 years old were identified. Both trials were at high risk of selection bias and unclear risk of detection bias. In one trial, pain due to the use of oscillating drill resulted lower than employing rotating drill (Verbal Hochman Scale: RR 0.64 (95% CI 0.41 to 1.00); Visual Facial Expression Scale: RR 0.64 (95% CI 0.44 to 0.94)). In another study, compared with traditional drill ultrasonic tip was associated with a lower level of patient's discomfort (RR 0.40 (95% CI 0.20 to 0.79)) but not with dental anxiety (RR 1.29 (95% CI 0.97 to 1.71)). The effectiveness of the removal of caries as well as fillings durability were only considered in one study, but no statistically significant differences were found between the two interventions. CONCLUSIONS: The evidence based on two low-quality studies was insufficient to conclude that the use of oscillating tips for the management of pain and dental fear in children or adolescents compared with rotating drills was more effective.

Effect of fibre posts, bone losses and fibre content on the biomechanical behaviour of endodontically treated teeth: 3D-finite element analysis.

The aim of this work was to evaluate the stress distribution inside endodontically treated teeth restored with different posts (glass fibre, carbon fibre and steel posts) under different loading conditions by using a 3D-finite element analysis. The effect of masticatory and impact forces on teeth with different degrees of bone loss was analysed. The model consists of: dentine, post, cement, gutta-percha, core and crown. Four simulations were conducted with two static forces (170N horizontal and 100N oblique) and two sections constrained: 1mm (alveolar bone position in a normal periodontium) and 6mm (middle of root) below the crown. Von Mises and the principal stresses were evaluated and analysed with a 3-way ANOVA and Tukey test (α=0.05) and the effect of fibre percentage analysed. Significant differences were found among the stress values for all conditions (p<0.05). Impact load was always responsible for the most critical situation especially when the bone loss was more evident. The system with steel posts showed the highest principal stresses at the post-cement interface with horizontal load and top constraints (compressive stress of 121MPa and tensile stress of 115MPa). The use of glass posts provides a more homogeneous behaviour of the system with lower stresses. Higher fibre percentages gave higher stress in the posts. Moreover, larger bone losses are responsible for important increase in stress. Thus, this work demonstrated that periodontal disease has an important role in the success of tooth restoration after endodontic therapy, influencing the choice of post material and depth.

A systematic review found that deviations from intention-to-treat are common in randomized trials and systematic reviews.

OBJECTIVES: To describe the characteristics, and estimate the incidence, of trials included in systematic reviews deviating from the intention-to-treat (ITT) principle. STUDY DESIGN AND SETTING: A 5% random sample of reviews were selected (Medline 2006-2010). Trials from reviews were classified based on the ITT: (1) ITT trials (trials reporting standard ITT analyses); (2) modified ITT (mITT) trials (modified ITT; trials deviating from standard ITT); or (3) no ITT trials. RESULTS: Of 222 reviews, 81 (36%) included at least one mITT trial. Reviews with mITT trials were more likely to contain trials that used placebo, that investigated drugs, and that reported favorable results. The incidence of reviews with mITT trial ranged from 29% (17/58) to 48% (23/48). Of the 2,349 trials, 597 (25.4%) were classified as ITT trials, 323 (13.8%) as mITT trials, and 1,429 (60.8%) as no ITT trials. The mITT trials were more likely to have reported exclusions compared to studies classified as ITT trials and to have received funding. CONCLUSION: The reporting of the type of ITT may differ according to the clinical area and the type of intervention. Deviation from ITT in randomized controlled trials is a widespread phenomenon that significantly affects systematic reviews.

Compressive and flexural behaviour of fibre reinforced endodontic posts.

OBJECTIVES: The aim of this study was to investigate the mechanical properties of five types of fibre-reinforced composite (FRC) posts and compare them with traditional metal post. METHODS: Five FRC posts and a metallic post having different geometry and type of fibre (glass, carbon or quartz fibre) were loaded to failure in compression and bending. The transverse sections of FRC posts were observed using SEM to evaluate the fracture mode and the percentage of fibres (compared with burn-off test). Densities and voids content were also evaluated. RESULTS: Mechanical results were subjected to a one-way ANOVA and Tukey test (p<0.05). In compression, quartz fibre posts exhibited the greater maximum load and ultimate strength, carbon fibre posts showed a poor compressive behaviour. All posts had similar compressive moduli. Carbon posts showed the highest flexural properties (p<0.0001) while glass posts the greater maximum load. The fracture load values correlated to the diameters of posts showed a parabolic behaviour. The flexural strengths of all posts were four and seven times higher than dentine. The elastic moduli of almost all posts were similar to dentine. The compressive strengths were lower than flexural strengths. The fibre diameters ranged from 5.2 to 26 µm, the volume percentage of fibres was about 64%. The content of voids of some posts lower their mechanical behaviour. CONCLUSIONS: Compressive properties of FRC posts were lower than in bending. The flexural properties of FRC posts were higher than the metal post and similar to dentine. The mechanical behaviour is influenced by voids.