A Color-Changing Biomimetic Material Closely Resembling the Spectral Characteristics of Vegetation Foliage.

Multispectral/hyperspectral technologies can easily detect man-made objects in vegetation by subtle spectral differences between the object and vegetation, and powerful reconnaissance increases the demand for camouflage materials closely resembling vegetation spectra. However, previous biomimetic materials have only presented static colors that cannot change color, and camouflage in multiple bands is difficult to achieve. To address this challenge, inspiration is drawn from the color change of foliage, and a color-change model is proposed with active and static pigments embedded in a matrix medium. The color of a composite material is dominated by the colored active pigment, which conceals the color of the static pigments and the color is revealed when the active pigment fades. A color-changing biomimetic material (CCBM) is developed with a solution casting method by adopting microcapsuled thermochromic pigments and chrome titanate yellow pigments as fillers in a base film with polyvinyl alcohol and lithium chloride. A Kubelka-Munk four-flux model is constructed to optimize the component proportions of the CCBM. The material has a reversible color change, closely resembles the foliage spectrum in UV-vis-NIR ranges, and imitates the thermal behavior of natural foliage in the mid-infrared regime. These results provide a novel approach to multispectral and hyperspectral camouflage.

Superior Heat and Mass Transfer Performance of Bionic Wick with Finger-like Pores Inspired by the Stomatal Array of Natural Leaf.

The thermal management of electronics has gained significant attention, with loop heat pipes (LHPs) emerging as an attractive solution for heat dissipation. The heat transfer performance of LHPs is influenced by the heat and mass transfer processes within the wick. However, designing the pore diameter of the wick is challenging due to the different requirements of flow resistance and capillary force. Specifically, the working fluid needs large pores to reduce resistance, while the liquid suction requires small pores to provide a large capillary force. To address this issue, we drew inspiration from the stomatal array of natural leaves used for transpiration and developed an alumina ceramic bionic wick with finger-like pores using the phase-inversion tape casting method. The finger-like pores in the wick resemble the straight hole structure of stomata, which increases the gas-liquid interface area within the wick. This design allows for timely discharge of water vapor generated by boiling, thereby reducing mass transfer resistance. Additionally, numerous micrometer-sized small pores surrounding the finger-like pores provide sufficient capillary force to replenish liquid for the gas-liquid evaporation interface. Experimental results demonstrate that the introduction of finger-like pores in the wick increases gas and water permeabilities by 2.4 and 5.2 times, respectively. Furthermore, the superior heat and mass transfer performance of the bionic wick was demonstrated with an LHP. This work effectively addresses the conflicting demands of capillary force and flow resistance, enhancing the heat transfer performance of LHPs, which holds great promise for addressing heat dissipation challenges in high power density electronic chips and has potential applications in aviation, aerospace, and microelectronics for efficient thermal management.

The roles of thermal insulation and heat storage in the energy performance of the wall materials: a simulation study.

A high-performance envelope is the prerequisite and foundation to a zero energy building. The thermal conductivity and volumetric heat capacity of a wall are two thermophysical properties that strongly influence the energy performance. Although many case studies have been performed, the results failed to give a big picture of the roles of these properties in the energy performance of an active building. In this work, a traversal study on the energy performance of a standard room with all potential wall materials was performed for the first time. It was revealed that both heat storage materials and insulation materials are suitable for external walls. However, the importances of those materials are distinct in different situations: the heat storage plays a primary role when the thermal conductivity of the material is relatively high, but the effect of the thermal insulation is dominant when the conductivity is relatively low. Regarding internal walls, they are less significant to the energy performance than the external ones, and they need exclusively the heat storage materials with a high thermal conductivity. These requirements for materials are consistent under various climate conditions. This study may provide a roadmap for the material scientists interested in developing high-performance wall materials.

How to be smart and energy efficient: a general discussion on thermochromic windows.

A window is a unique element in a building because of its simultaneous properties of being "opaque" to inclement weather yet transparent to the observer. However, these unique features make the window an element that can reduce the energy efficiency of buildings. A thermochromic window is a type of smart window whose solar radiation properties vary with temperature. It is thought that the solar radiation gain of a room can be intelligently regulated through the use of thermochromic windows, resulting in lower energy consumption than with standard windows. Materials scientists have made many efforts to improve the performance of thermochromic materials. Despite these efforts, fundamental problems continue to confront us. How should a "smart" window behave? Is a "smart" window really the best candidate for energy-efficient applications? What is the relationship between smartness and energy performance? To answer these questions, a general discussion of smartness and energy performance is provided.