Nonisocyanate Polyurethane Segmented Copolymers from Bis-Carbonylimidazolides.

Bis-carbonylimidazolide (BCI) functionalization enables an efficient synthetic strategy to generate high molecular weight segmented nonisocyanate polyurethanes (NIPUs). Melt phase polymerization of ED-2003 Jeffamine, 4,4'-methylenebis(cyclohexylamine), and a BCI monomer that mimics a 1,4-butanediol chain extender enables polyether NIPUs that contain varying concentrations of hard segments ranging from 40 to 80 wt. %. Dynamic mechanical analysis and differential scanning calorimetry reveal thermal transitions for soft, hard, and mixed phases. Hard segment incorporations between 40 and 60 wt. % display up to three distinct phases pertaining to the poly(ethylene glycol) (PEG) soft segment Tg, melting transition, and hard segment Tg, while higher hard segment concentrations prohibit soft segment crystallization, presumably due to restricted molecular mobility from the hard segment. Atomic force microscopy allows for visualization and size determination of nanophase-separated regimes, revealing a nanoscale rod-like assembly of HS. Small-angle X-ray scattering confirms nanophase separation within the NIPU, characterizing both nanoscale amorphous domains and varying degrees of crystallinity. These NIPUs, which are synthesized with BCI monomers, display expected phase separation that is comparable to isocyanate-derived analogues. This work demonstrates nanophase separation in BCI-derived NIPUs and the feasibility of this nonisocyanate synthetic pathway for the preparation of segmented PU copolymers.

Temporally Stable Supramolecular Polymeric Salts Enabling High-Performance 3D All-Aromatic Polyimide Lattices.

Vat photopolymerization (VP) Additive Manufacturing (AM), in which UV light is selectively applied to cure photo-active polymers into complex geometries with micron-scale resolution, has a limited selection of aliphatic thermoset materials that exhibit relatively poor thermal performance. Ring-opening dianhydrides with acrylate-containing nucleophiles yielded diacrylate ester-dicarboxylic acids that enabled photo-active polyimide (PI) precursors, termed polysalts, upon neutralization with an aromatic diamine in solution. In situ FTIR spectroscopy coupled with a solution and photo-rheological measurements revealed a previously unknown time-dependent instability of 4,4'-oxydianiline (ODA) polysalts due to an aza-Michael addition. Replacement of the electron-donating ether-containing diamine with an electron withdrawing sulfone-containing monomer, e.g., 4,4'-diaminodiphenyl sulfone (DDS), prohibited the aza-Michael addition of the aromatic amine to the activated acrylate double bond. Novel DDS polysalt photocurable solutions are similarly analyzed and validated long-term stability, which enabled reproducible printing of polyimide organogel intermediates. Subsequent VP AM afforded 3-dimensional (3D) structures of intricate complexity and excellent surface finish, as demonstrated with scanning electron microscopy. In addition, the novel PMDA-HEA/DDS solution enabled the production of the first beam latticed architecture comprised of all-aromatic polyimide. The versatility of a polysalt platform for multi-material printing is further demonstrated by printing parts with alternating polysalt compositions.

Development of a fluorescence screening assay for binding partners of the iron-sulfur mitochondrial protein mitoNEET.

MitoNEET belongs to the CDGSH Iron-Sulfur Domain (CISD)-gene family of proteins and is a [2Fe-2S] cluster-containing protein found on the outer membrane of mitochondria. The specific functions of mitoNEET/CISD1 remain to be fully elucidated, but the protein is involved in regulating mitochondrial bioenergetics in several metabolic diseases. Unfortunately, drug discovery efforts targeting mitoNEET to improve metabolic disorders are hampered by the lack of ligand-binding assays for this mitochondrial protein. We have developed a protocol amenable for high-throughput screening (HTS) assay, by modifying an ATP fluorescence polarization method to facilitate drug discovery targeting mitoNEET. Based on our observation that adenosine triphosphate (ATP) interacts with mitoNEET, ATP-fluorescein was used during assay development. We established a novel binding assay suitable for both 96- or 384-well plate formats with tolerance for the presence of 2% v/v dimethyl sulfoxide (DMSO). We determined the IC50-values for a set of benzesulfonamide derivatives and found the novel assay reliably ranked the binding-affinities of compounds compared to radioactive binding assay with human recombinant mitoNEET. The developed assay platform is crucial in identifying novel chemical probes for metabolic diseases. It will accelerate drug discovery targeting mitoNEET and potentially other members of the CISD gene family.

Applications and Opportunities in Using Disulfides, Thiosulfinates, and Thiosulfonates as Antibacterials.

Sulfur-containing molecules have a long history of bioactivity, especially as antibacterial agents in the fight against infectious pathogens. Organosulfur compounds from natural products have been used to treat infections throughout history. Many commercially available antibiotics also have sulfur-based moieties in their structural backbones. In the following review, we summarize sulfur-containing antibacterial compounds, focusing on disulfides, thiosulfinates, and thiosulfonates, and opportunities for future developments in the field.

Context-dependent activation of p53 target genes and induction of apoptosis by actinomycin D in aerodigestive tract cancers.

Actinomycin D (ActD) was the first anticancer antibiotic approved for the management of human cancers. However, the notorious toxicity profile limits its widespread application in cancers, including cancers of the aerodigestive tract. Recent studies show that combining low-dose ActD with existing chemotherapies could potentially protect normal cells from the toxicity of chemotherapy drugs through p53 activation (cyclotherapy). An understanding of ActD's effect on p53 signaling is critical for the meaningful application of ActD in cyclotherapy-based combinations. This study evaluated the anti-tumor efficacy and mechanism of action of ActD in aerodigestive tract cancers. We found that ActD strongly inhibited the growth of a panel of aerodigestive tract cancer cell lines and induced efficient apoptosis, although the sensitivity varies among cell lines. The IC50 values of ActD spanned between 0.021 and 2.96 nM. Mechanistic studies revealed that ActD increased the expression of total and phosphorylated p53 (ser15) in a time- and dose-dependent manner. Moreover, ActD-induced apoptosis is dependent on p53 in cells expressing wild-type p53 and that ActD induced context-dependent differential expression of downstream targets p21 and PUMA without significant effects on p27. In the final analysis, this study revealed that p53-p21 is the predominant pathway activated by low-dose ActD, supporting further development of ActD in cyclotherapy.

Effect of copper on the antifungal activity of disulfiram (Antabuse®) in fluconazole-resistant Candida strains.

Disulfiram (Antabuse®) is an alcohol use disorder medication that exhibits antifungal activity against Candida species. The purpose of this investigation was to determine if copper potentiates the antifungal effects of disulfiram based on prior observations that the combination demonstrates increased antitumor activity. Our findings revealed that copper addition conferred up to an eight-fold reduction in the minimum inhibitory concentrations (MICs) of disulfiram by broth microdilution assessment. Unexpectedly, copper was also found to nullify the fungicidal activity of disulfiram despite the significant reduction in MICs. It was therefore concluded that copper likely increased the antifungal potency of disulfiram through formation of a fungistatic chelation complex. LAY SUMMARY: The effect of copper on the antifungal activity of disulfiram was evaluated against fluconazole-resistant Candida species. The study establishes that copper addition confers greater inhibition of disulfiram-treated Candida cultures, but the combination antagonizes the killing effects of disulfiram.

Non-isocyanate Polyurethanes from 1,1'-Carbonyldiimidazole: A Polycondensation Approach.

1,1'-Carbonyldiimidazole (CDI) provides a platform to generate high molecular weight polyurethanes from industrially relevant diols and diamines. CDI, which is described in the literature for its use in amidation and functionalization reactions, enables the production of well-defined and stable polyurethane precursors, thus eliminating the need for isocyanates. Herein, the functionalization of 1,4-butanediol with CDI yields an electrophilic biscarbamate, bis-carbonylimidazolide (BCI), which is suitable for further step-growth polymerization in the presence of amines. Elevated reaction temperatures enable the solvent-, catalyst-, and isocyanate-free polycondensation reaction between the BCI monomer and various diamines. The thermoplastic polyurethanes produced from this reaction demonstrate high thermal stability, tunable glass transition temperatures based on incorporation of flexible polyether segments, and mechanically ductile thin films. CDI functionalized diols will allow the preparation of diverse polyurethanes without the use of isocyanate-containing monomers.

Quadruple Hydrogen Bond-Containing A-AB-A Triblock Copolymers: Probing the Influence of Hydrogen Bonding in the Central Block.

This work reveals the influence of pendant hydrogen bonding strength and distribution on self-assembly and the resulting thermomechanical properties of A-AB-A triblock copolymers. Reversible addition-fragmentation chain transfer polymerization afforded a library of A-AB-A acrylic triblock copolymers, wherein the A unit contained cytosine acrylate (CyA) or post-functionalized ureido cytosine acrylate (UCyA) and the B unit consisted of n-butyl acrylate (nBA). Differential scanning calorimetry revealed two glass transition temperatures, suggesting microphase-separation in the A-AB-A triblock copolymers. Thermomechanical and morphological analysis revealed the effects of hydrogen bonding distribution and strength on the self-assembly and microphase-separated morphology. Dynamic mechanical analysis showed multiple tan delta (δ) transitions that correlated to chain relaxation and hydrogen bonding dissociation, further confirming the microphase-separated structure. In addition, UCyA triblock copolymers possessed an extended modulus plateau versus temperature compared to the CyA analogs due to the stronger association of quadruple hydrogen bonding. CyA triblock copolymers exhibited a cylindrical microphase-separated morphology according to small-angle X-ray scattering. In contrast, UCyA triblock copolymers lacked long-range ordering due to hydrogen bonding induced phase mixing. The incorporation of UCyA into the soft central block resulted in improved tensile strength, extensibility, and toughness compared to the AB random copolymer and A-B-A triblock copolymer comparisons. This study provides insight into the structure-property relationships of A-AB-A supramolecular triblock copolymers that result from tunable association strengths.

Efficacy of Aerosolized Rifaximin versus Tobramycin for Treatment of Pseudomonas aeruginosa Pneumonia in Mice.

Pseudomonas aeruginosa is a Gram-negative opportunistic bacterial pathogen that can cause chronic lung infections in patients with cystic fibrosis (CF). The current preferred treatment for CF lung infections includes inhaled tobramycin (TOB); however, studies suggest TOB cannot effectively inhibit biofilm formation. Using an NIH small compounds drug library approved for safe use in humans, we identified rifaximin (RFX), a semisynthetic, rifamycin family, nonsystemic antibiotic that inhibits alginate production and growth in P. aeruginosa Inhibition of alginate production was further analyzed using the uronic acid carbazole assay and a promoter reporter assay that measures the transcription of the alginate biosynthetic operon. Compared to TOB, RFX significantly reduced alginate production in laboratory and CF sputum isolates of P. aeruginosa In addition, RFX showed a narrow range of MICs when measured with multidrug-resistant bacterial species of clinical relevance, synergistic activities with TOB or amikacin against clinical isolates, as well as reduction toward in vitro preformed biofilms. In C57BL/6 mice, penetration of nebulized TOB into the lungs was shown at a higher level than that of RFX. Further, in vivo assessment using a DBA/2 mouse lung infection model found increased survival rates with a single-dose treatment of nebulized RFX and decreased P. aeruginosa PAO1 bioburden with a multiple-dose treatment of RFX plus TOB. In addition, mice treated with a single exposure to dimethyl sulfoxide (DMSO), a solvent that dissolves RFX, showed no apparent toxicity. In summary, RFX may be used to supplement TOB inhalation therapy to increase efficacy against P. aeruginosa biofilm infections.

Binding of thiazolidinediones to the endoplasmic reticulum protein nutrient-deprivation autophagy factor-1.

Nutrient-deprivation autophagy factor-1 (NAF-1, miner1; gene cisd2) is part of the [2Fe-2S]-containing protein family which includes mitoNEET (gene cisd1) and MiNT (miner2; gene cisd3). These proteins are redox active and are thought to play an important role in cellular energy homeostasis with NAF-1 playing a critical role in calcium regulation and aging. To date, no studies have investigated potential ligand interaction with NAF-1. Here we show that the thiazolidinediones pioglitazone and rosiglitazone along with the mitoNEET ligand, NL-1, bind to NAF-1 with low micromolar affinities. Further, we show that overexpression of NAF-1 in hepatocellular carcinoma (HepG2) cells reduces inhibition of mitochondrial respiration by pioglitazone. Our findings support the need for further efforts of the rational design of selective NAF-1 ligands.

Advances in Polymeric Materials for Electromechanical Devices.

Electroactive polymers (EAP) provide lightweight and cost-effective materials that enable the next generation of electromechanical devices. Commercial polymers have historically dominated research in EAP devices due to their availability. However, several drawbacks of these materials have limited their commercial applications, necessitating new materials for the commercial success of future EAP devices. This review highlights recent advances in novel EAPs for ionic polymer-metal composites (IPMC) and dielectric elastomer actuators (DEA). Ion-containing block copolymers and charged segmented condensation polymers demonstrate suitable electromechanical properties competitive with Nafion-based IPMCs. In addition, swelling ionic polymer membranes with free ionic liquid enhances ionic conductivity and promotes electromechanical actuation. Synthetic approaches to increasing permittivity in dielectric elastomers are also explored as a method of producing more efficient DEAs. Incorporating polar functional groups into siloxane and acrylic elastomers through grafting or blending provides high-dielectric elastomers for use in DEAs with low driving voltages.

Advanced Polymers for Reduced Energy Consumption in Architecture.

In an effort to slow the progress of climate change, the current scientific community has focused on the reduction of greenhouse gases in order to limit the global average temperature inflation to less than 2 °C. The improvement of thermally controlled construction materials can potentially result in lower energy homes/reduced emissions, and lowering the thermal conductivity of insulation materials improves home energy efficiency. Nanoporous insulation foams impart a drastic decrease in thermal conductivity but many polymer properties must be assessed to produce these materials. Passive phase-change materials also represent another key energy-saving device to control heat flux within a living space. Research into unique polymeric systems provides a novel means of encapsulation or creating polymeric cross-linked matrices to prevent leakage and improve mechanical robustness. These two areas of polymer research in architecture represent key advancements for construction materials aimed toward energy savings and energy-related emissions control.

Disulfiram-based disulfides as narrow-spectrum antibacterial agents.

Sixteen disulfides derived from disulfiram (Antabuse™) were evaluated as antibacterial agents. Derivatives with hydrocarbon chains of seven and eight carbons in length exhibited antibacterial activity against Gram-positive Staphylococcus, Streptococcus, Enterococcus, Bacillus, and Listeria spp. A comparison of the cytotoxicity and microsomal stability with disulfiram further revealed that the eight carbon chain analog was of lower toxicity to human hepatocytes and has a longer metabolic half-life. In the final analysis, this investigation concluded that the S-octylthio derivative is a more effective growth inhibitor of Gram-positive bacteria than disulfiram and exhibits more favorable cytotoxic and metabolic parameters over disulfiram.

Enhanced scattering induced by electrostatic correlations in concentrated solutions of salt-free dipolar and ionic polymers.

We present a generalized theory for studying the static monomer density-density correlation function (structure factor) in concentrated solutions and melts of dipolar as well as ionic polymers. The theory captures effects of electrostatic fluctuations on the structure factor and provides insights into the origin of experimentally observed enhanced scattering at ultralow wavevectors in salt-free ionic polymers. It is shown that the enhanced scattering can originate from a coupling between the fluctuations of electric polarization and monomer density. Local and non-local effects of the polarization resulting from finite sized permanent dipoles and ion-pairs in dipolar and charge regulating ionic polymers, respectively, are considered. Theoretical calculations reveal that, similar to the salt-free ionic polymers, the structure factor for dipolar polymers can also exhibit a peak at a finite wavevector and enhanced scattering at ultralow wavevectors. Although consideration of dipolar interactions leads to attractive interactions between monomers, the enhanced scattering at ultralow wavevectors is predicted solely on the basis of the electrostatics of weakly inhomogeneous dipolar and ionic polymers without considering the effects of any aggregates or phase separation. Thus, we conclude that neither aggregation nor phase separation is necessary for observing the enhanced scattering at ultralow wavevectors in salt-free dipolar and ionic polymers. For charge regulating ionic polymers, it is shown that electrostatic interactions between charged monomers get screened with a screening length, which depends not only on the concentration of "free" counterions and coions, but also on the concentration of "adsorbed" ions on the polymer chains. Qualitative comparisons with the experimental scattering curves for ionic and dipolar polymer melts are presented using the theory developed in this work.

Repurposing Thiram and Disulfiram as Antibacterial Agents for Multidrug-Resistant Staphylococcus aureus Infections.

Thiram and disulfiram were evaluated as antibacterial agents against multidrug-resistant Staphylococcus aureus Against a 30-member panel comprised of vancomycin-susceptible, vancomycin-intermediate, and vancomycin-resistant S. aureus strains, the MIC90 values of the respective test agents were 4 and 16 µg/ml. Additional analyses revealed that thiram and disulfiram are rapid-acting bacteriostatic agents with narrow, Gram-positive-bacterium spectrum activity. Synergy studies further determined that disulfiram increases the vancomycin susceptibility of three clinical vancomycin-resistant S. aureus strains in vitro, thus establishing a potential use in combination therapy.

3D Printing Polymers with Supramolecular Functionality for Biological Applications.

Supramolecular chemistry continues to experience widespread growth, as fine-tuned chemical structures lead to well-defined bulk materials. Previous literature described the roles of hydrogen bonding, ionic aggregation, guest/host interactions, and π-π stacking to tune mechanical, viscoelastic, and processing performance. The versatility of reversible interactions enables the more facile manufacturing of molded parts with tailored hierarchical structures such as tissue engineered scaffolds for biological applications. Recently, supramolecular polymers and additive manufacturing processes merged to provide parts with control of the molecular, macromolecular, and feature length scales. Additive manufacturing, or 3D printing, generates customizable constructs desirable for many applications, and the introduction of supramolecular interactions will potentially increase production speed, offer a tunable surface structure for controlling cell/scaffold interactions, and impart desired mechanical properties through reinforcing interlayer adhesion and introducing gradients or self-assembled structures. This review details the synthesis and characterization of supramolecular polymers suitable for additive manufacture and biomedical applications as well as the use of supramolecular polymers in additive manufacturing for drug delivery and complex tissue scaffold formation. The effect of supramolecular assembly and its dynamic behavior offers potential for controlling the anisotropy of the printed objects with exquisite geometrical control. The potential for supramolecular polymers to generate well-defined parts, hierarchical structures, and scaffolds with gradient properties/tuned surfaces provides an avenue for developing next-generation biomedical devices and tissue scaffolds.

Synthesis of Water-Soluble Imidazolium Polyesters as Potential Nonviral Gene Delivery Vehicles.

The inherent hydrolytic reactivity of polyesters renders them excellent candidates for a variety of biomedical applications. Incorporating ionic groups further expands their potential impact, encompassing charge-dependent function such as deoxyribonucleic acid (DNA) binding, antibacterial properties, and pH-responsiveness. Catalyst-free and solvent-free polycondensation of a bromomethyl imidazolium-containing (BrMeIm) diol with neopentylglycol (NPG) and adipic acid (AA) afforded novel charged copolyesters with pendant imidazolium sites. Varying ionic content influenced thermal properties and offered a wide-range, -41 to 40 °C, of composition-dependent glass transition temperatures (Tgs). In addition to desirable melt and thermal stability, polyesters with ionic concentrations ≥15 mol % readily dispersed in water, suggesting potential as nonviral gene delivery vectors. An electrophoretic gel shift assay confirmed the novel cationic copolyesters successfully bound DNA at an N/P ratio of 4 for 50 mol % and 75 mol % charged copolyesters (P(NA50-co-ImA50) and P(NA25-co-ImA75)), and an N/P ratio of 5 for 100 mol % Im (PImA). Polyplexes exhibited insignificant cytotoxicity even at high concentrations (200 µg/mL), and a Luciferase transfection assay revealed the ionic (co)polyesters transfected DNA significantly better than the untreated controls. The successful transfection of these novel (co)polyesters inspires future imidazolium-containing polyester design.

TIPS pentacene loaded PEO-PDLLA core-shell nanoparticles have similar cellular uptake dynamics in M1 and M2 macrophages and in corresponding in vivo microenvironments.

Nanoparticle based drug delivery platforms have the potential to transform disease treatment paradigms and therapeutic strategies, especially in the context of pulmonary medicine. Once administered, nanoparticles disperse throughout the lung and many are phagocytosed by macrophages. However, there is a paucity of knowledge regarding cellular up-take dynamics of nanoparticles due largely to macrophage heterogeneity. To address this issue, we sought to better define nanoparticle up-take using polarized M1 and M2 macrophages and novel TIPS-pentacene loaded PEO-PDLLA nanoparticles. Our data reveal that primary macrophages polarized to either M1 or M2 phenotypes have similar levels of nanoparticle phagocytosis. Similarly, M1 and M2 polarized macrophages isolated from the lungs of mice following either acute (Th1) or allergic (Th2) airway inflammation also demonstrated equivalent levels of nanoparticle up-take. Together, these studies provide critical benchmark information pertaining to cellular up-take dynamics and biodistribution of nanoparticles in the context of clinically relevant inflammatory microenvironments.

Allicin-inspired thiolated fluoroquinolones as antibacterials against ESKAPE pathogens.

Thiolated fluoroquinolones were synthesized from ciprofloxacin and evaluated for antimicrobial activity against a panel of pathogenic bacteria. Gram-positive species including methicillin-resistant Staphylococcus aureus (MRSA) exhibited the highest level of increased sensitivity toward ciprofloxacin bound with a N-propylthio substituent. Evidence was found that the antibiotics form disulfides with low molecular weight thiols in bacteria and potentiate generation of cytosolic reactive oxygen species (ROS). In final analysis, the enhanced anti-MRSA activity of thiolated fluoroquinolones was attributed to increased cell permeability and reaction with cytosolic thiols that yields an inactive disulfide metabolite and the parent drug ciprofloxacin as an inhibitor of DNA synthesis.

Anionic fluoroquinolones as antibacterials against biofilm-producing Pseudomonas aeruginosa.

Pseudomonas aeruginosa is a common biofilm-forming bacterial pathogen implicated in diseases of the lungs. The extracellular polymeric substances (EPS) of respiratory Pseudomonas biofilms are largely comprised of anionic molecules such as rhamnolipids and alginate that promote a mucoid phenotype. In this Letter, we examine the ability of negatively-charged fluoroquinolones to transverse the EPS and inhibit the growth of mucoid P. aeruginosa. Anionic fluoroquinolones were further compared with standard antibiotics via a novel microdiffusion assay to evaluate drug penetration through pseudomonal alginate and respiratory mucus from a patient with cystic fibrosis.