Nonequilibrium sensing of volatile compounds using active and passive analyte delivery.

Although sensor technologies have allowed us to outperform the human senses of sight, hearing, and touch, the development of artificial noses is significantly behind their biological counterparts. This largely stems from the sophistication of natural olfaction, which relies on both fluid dynamics within the nasal anatomy and the response patterns of hundreds to thousands of unique molecular-scale receptors. We designed a sensing approach to identify volatiles inspired by the fluid dynamics of the nose, allowing us to extract information from a single sensor (here, the reflectance spectra from a mesoporous one-dimensional photonic crystal) rather than relying on a large sensor array. By accentuating differences in the nonequilibrium mass-transport dynamics of vapors and training a machine learning algorithm on the sensor output, we clearly identified polar and nonpolar volatile compounds, determined the mixing ratios of binary mixtures, and accurately predicted the boiling point, flash point, vapor pressure, and viscosity of a number of volatile liquids, including several that had not been used for training the model. We further implemented a bioinspired active sniffing approach, in which the analyte delivery was performed in well-controlled 'inhale-exhale' sequences, enabling an additional modality of differentiation and reducing the duration of data collection and analysis to seconds. Our results outline a strategy to build accurate and rapid artificial noses for volatile compounds that can provide useful information such as the composition and physical properties of chemicals, and can be applied in a variety of fields, including disease diagnosis, hazardous waste management, and healthy building monitoring.

Covalent Organic Frameworks as Single-Site Photocatalysts for Solar-to-Fuel Conversion.

Single-site photocatalysts (SSPCs) are well-established as potent platforms for designing innovative materials to accomplish direct solar-to-fuel conversion. Compared to classical inorganic porous materials, such as zeolites and silica, covalent organic frameworks (COFs)─an emerging class of porous polymers that combine high surface areas, structural diversity, and chemical stability─are attractive candidates for SSPCs due to their molecular-level precision and intrinsic light harvesting ability, both amenable to structural engineering. In this Perspective, we summarize the design concepts and state-of-the-art strategies for the construction of COF SSPCs, and we review the development of COF SSPCs and their applications in solar-to-fuel conversion from their inception. Underlying pitfalls concerning photocatalytic characterization are discussed, and perspectives for the future development of this burgeoning field are given.

Decoupling of Light and Dark Reactions in a 2D Niobium Tungstate for Light-Induced Charge Storage and On-Demand Hydrogen Evolution.

The direct coupling of light harvesting and charge storage in a single material opens new avenues to light storing devices. Here we demonstrate the decoupling of light and dark reactions in the two-dimensional layered niobium tungstate (TBA)+(NbWO6)- for on-demand hydrogen evolution and solar battery energy storage. Light illumination drives Li+/H+ photointercalation into the (TBA)+(NbWO6)- photoanode, leading to small polaron formation assisted by structural distortions on the WOx sublattice, along with a light-induced decrease in material resistance over 2 orders of magnitude compared to the dark. The photogenerated electrons can be extracted on demand to produce solar hydrogen upon the addition of a Pt catalyst. Alternatively, they can be stored for over 20 h under oxygen-free conditions after 365 nm UV illumination for only 10 min, thus featuring a solar battery anode with promising capacity and long-term stability. The optoionic effects described herein offer new insights to overcome the intermittency of solar irradiation, while inspiring applications at the interface of solar energy conversion and energy storage, including solar batteries, "dark" photocatalysis, solar battolyzers, and photomemory devices.

Noncollinear Electric Dipoles in a Polar Chiral Phase of CsSnBr3 Perovskite.

Polar and chiral crystal symmetries confer a variety of potentially useful functionalities upon solids by coupling otherwise noninteracting mechanical, electronic, optical, and magnetic degrees of freedom. We describe two phases of the 3D perovskite, CsSnBr3, which emerge below 85 K due to the formation of Sn(II) lone pairs and their interaction with extant octahedral tilts. Phase II (77 K < T < 85 K, space group P21/m) exhibits ferroaxial order driven by a noncollinear pattern of lone pair-driven distortions within the plane normal to the unique octahedral tilt axis, preserving the inversion symmetry observed at higher temperatures. Phase I (T < 77 K, space group P21) additionally exhibits ferroelectric order due to distortions along the unique tilt axis, breaking both inversion and mirror symmetries. This polar and chiral phase exhibits second harmonic generation from the bulk and pronounced electrostriction and negative thermal expansion along the polar axis (Q22 ≈ 1.1 m4 C-2; αb = -7.8 × 10-5 K-1) through the onset of polarization. The structures of phases I and II were predicted by recursively following harmonic phonon instabilities to generate a tree of candidate structures and subsequently corroborated by synchrotron X-ray powder diffraction and polarized Raman and 81Br nuclear quadrupole resonance spectroscopies. Preliminary attempts to suppress unintentional hole doping to allow for ferroelectric switching are described. Together, the polar symmetry, small band gap, large spin-orbit splitting of Sn 5p orbitals, and predicted strain sensitivity of the symmetry-breaking distortions suggest bulk samples and epitaxial films of CsSnBr3 or its neighboring solid solutions as candidates for bulk Rashba effects.

Atomic Insights into the Competitive Edge of Nanosheets Splitting Water.

The oxygen evolution reaction (OER) provides the protons for many electrocatalytic power-to-X processes, such as the production of green hydrogen from water or methanol from CO2. Iridium oxohydroxides (IOHs) are outstanding catalysts for this reaction because they strike a unique balance between activity and stability in acidic electrolytes. Within IOHs, this balance varies with the atomic structure. While amorphous IOHs perform best, they are least stable. The opposite is true for their crystalline counterparts. These rules-of-thumb are used to reduce the loading of scarce IOH catalysts and retain the performance. However, it is not fully understood how activity and stability are related at the atomic level, hampering rational design. Herein, we provide simple design rules (Figure 12) derived from the literature and various IOHs within this study. We chose crystalline IrOOH nanosheets as our lead material because they provide excellent catalyst utilization and a predictable structure. We found that IrOOH signals the chemical stability of crystalline IOHs while surpassing the activity of amorphous IOHs. Their dense bonding network of pyramidal trivalent oxygens (µ3Δ-O) provides structural integrity, while allowing reversible reduction to an electronically gapped state that diminishes the destructive effect of reductive potentials. The reactivity originates from coordinative unsaturated edge sites with radical character, i.e., µ1-O oxyls. By comparing to other IOHs and literature, we generalized our findings and synthesized a set of simple rules that allow prediction of stability and reactivity of IOHs from atomistic models. We hope that these rules will inspire atomic design strategies for future OER catalysts.

Exploring Layered Disorder in Lithium-Ion-Conducting Li3Y1-xInxCl6.

Li3Y1-xInxCl6 undergoes a phase transition from trigonal to monoclinic via an intermediate orthorhombic phase. Although the trigonal yttrium containing the end member phase, Li3YCl6, synthesized by a mechanochemical route, is known to exhibit stacking fault disorder, not much is known about the monoclinic phases of the serial composition Li3Y1-xInxCl6. This work aims to shed light on the influence of the indium substitution on the phase evolution, along with the evolution of stacking fault disorder using X-ray and neutron powder diffraction together with solid-state nuclear magnetic resonance spectroscopy, studying the lithium-ion diffusion. Although Li3Y1-xInxCl6 with x ≤ 0.1 exhibits an ordered trigonal structure like Li3YCl6, a large degree of stacking fault disorder is observed in the monoclinic phases for the x ≥ 0.3 compositions. The stacking fault disorder materializes as a crystallographic intergrowth of faultless domains with staggered layers stacked in a uniform layer stacking, along with faulted domains with randomized staggered layer stacking. This work shows how structurally complex even the "simple" series of solid solutions can be in this class of halide-based lithium-ion conductors, as apparent from difficulties in finding a consistent structural descriptor for the ionic transport.

Direct Observation of Propagating Spin Waves in the 2D van der Waals Ferromagnet Fe5GeTe2.

Magnetism in reduced dimensionalities is of great fundamental interest while also providing perspectives for applications of materials with novel functionalities. In particular, spin dynamics in two dimensions (2D) have become a focus of recent research. Here, we report the observation of coherent propagating spin-wave dynamics in a ∼30 nm thick flake of 2D van der Waals ferromagnet Fe5GeTe2 using X-ray microscopy. Both phase and amplitude information were obtained by direct imaging below TC for frequencies from 2.77 to 3.84 GHz, and the corresponding spin-wave wavelengths were measured to be between 1.5 and 0.5 µm. Thus, parts of the magnonic dispersion relation were determined despite a relatively high magnetic damping of the material. Numerically solving an analytic multilayer model allowed us to corroborate the experimental dispersion relation and predict the influence of changes in the saturation magnetization or interlayer coupling, which could be exploited in future applications by temperature control or stacking of 2D-heterostructures.

Celebrating Ten Years of Covalent Organic Frameworks for Solar Energy Conversion: Past, Present and Future.

Accelerated anthropogenic emission of greenhouse gases due to increasing energy demands has created a negative impact on our planet. Therefore, the replacement of fossil by renewable energy resources has become of paramount interest, both societally and scientifically. It is within this setting that organic photocatalysts have emerged as a new generation of earth-abundant catalysts for the conversion of solar radiation into chemical energy. In 2014, the first example of a covalent organic framework (COF) photocatalyst for the hydrogen evolution reaction was reported by our group, which has not only marked the beginning of COF photocatalysis for solar fuel production but also helped to accelerate research into "soft photocatalysis" based on porous polymers in general. In the last decade, significant progress has been made toward developing COFs as robust, molecularly precise platforms emulating artificial photosynthesis. This mini-review commemorates the 10th anniversary of COF photocatalysis and gives a brief historical overview of the milestones in the field since its inception in 2014. We review milestones in the development of COFs for solar fuel production and related photocatalytic transformations, including hydrogen evolution, oxygen evolution, overall water splitting, CO2 reduction, N2 fixation, oxygen reduction, and alcohol oxidation. We discuss lessons learned for the design of structure-property-function relationships in COF photocatalysts, and future perspectives and challenges for the field of "soft photocatalysis" are given.

Nitric Oxide (NO) as a Reagent for Topochemical Framework Transformation and Controlled NO Release in Covalent Organic Frameworks.

Covalent organic frameworks (COFs) have emerged as versatile platforms for the separation and storage of hazardous gases. Simultaneously, the synthetic toolbox to tackle the "COF trilemma" has been diversified to include topochemical linkage transformations and post-synthetic stabilization strategies. Herein, we converge these themes and reveal the unique potential of nitric oxide (NO) as a new reagent for the scalable gas-phase transformation of COFs. Using physisorption and solid-state nuclear magnetic resonance spectroscopy on 15N-enriched COFs, we study the gas uptake capacity and selectivity of NO adsorption and unravel the interactions of NO with COFs. Our study reveals the clean deamination of terminal amine groups on the particle surfaces by NO, exemplifying a unique surface passivation strategy for COFs. We further describe the formation of a NONOate linkage by the reaction of NO with an amine-linked COF, which shows controlled release of NO under physiological conditions. NONOate-COFs thus show promise as tunable NO delivery platforms for bioregulatory NO release in biomedical applications.

Postsynthetic Transformation of Imine- into Nitrone-Linked Covalent Organic Frameworks for Atmospheric Water Harvesting at Decreased Humidity.

Herein, we report a facile postsynthetic linkage conversion method giving synthetic access to nitrone-linked covalent organic frameworks (COFs) from imine- and amine-linked COFs. The new two-dimensional (2D) nitrone-linked covalent organic frameworks, NO-PI-3-COF and NO-TTI-COF, are obtained with high crystallinity and large surface areas. Nitrone-modified pore channels induce condensation of water vapor at 20% lower humidity compared to their amine- or imine-linked precursor COFs. Thus, the topochemical transformation to nitrone linkages constitutes an attractive approach to postsynthetically fine-tune water adsorption properties in framework materials.

Unlocking New Topologies in Zr-Based Metal-Organic Frameworks by Combining Linker Flexibility and Building Block Disorder.

The outstanding diversity of Zr-based frameworks is inherently linked to the variable coordination geometry of Zr-oxo clusters and the conformational flexibility of the linker, both of which allow for different framework topologies based on the same linker-cluster combination. In addition, intrinsic structural disorder provides a largely unexplored handle to further expand the accessibility of novel metal-organic framework (MOF) structures that can be formed. In this work, we report the concomitant synthesis of three topologically different MOFs based on the same M6O4(OH)4 clusters (M = Zr or Hf) and methane-tetrakis(p-biphenyl-carboxylate) (MTBC) linkers. Two novel structural models are presented based on single-crystal diffraction analysis, namely, cubic c-(4,12)MTBC-M6 and trigonal tr-(4,12)MTBC-M6, which comprise 12-coordinated clusters and 4-coordinated tetrahedral linkers. Notably, the cubic phase features a new architecture based on orientational cluster disorder, which is essential for its formation and has been analyzed by a combination of average structure refinements and diffuse scattering analysis from both powder and single-crystal X-ray diffraction data. The trigonal phase also features structure disorder, although involving both linkers and secondary building units. In both phases, remarkable geometrical distortion of the MTBC linkers illustrates how linker flexibility is also essential for their formation and expands the range of achievable topologies in Zr-based MOFs and its analogues.

Finding Order in Disorder: The Highly Disordered Lithium Oxonitridophosphate Double Salt Li8+x P3 O10-x N1+x (x=1.4(5)).

The crystalline lithium oxonitridophosphate Li8+x P3 O10-x N1+x , was obtained in an ampoule synthesis from P3 N5 and Li2 O. The compound crystallizes in the triclinic space group P 1 - ${\mathrel{\mathop{{\rm { 1}}}\limits^{{\rm -}}}}$ with a=5.125(2), b=9.888(5), c=10.217(5) Å, α=70.30(2), ß=76.65(2), γ=77.89(2)°. Li8+x P3 O10-x N1+x is a double salt, the structure of which contains distinctive complex anion species, namely non-condensed P(O,N)4 tetrahedra, and P(O,N)7 double tetrahedra connected by one N atom. Additionally, there is mixed occupation of O/N positions, which enables further anionic species by variation of O/N occupancies. To characterize these motifs in detail, complementary analytical methods were applied. The double tetrahedron exhibits significant disorder in single-crystal X-ray diffraction. Furthermore, the title compound is a Li+ ion conductor with a total ionic conductivity of 1.2×10-7  S cm-1 at 25 °C, and a corresponding total activation energy of 0.47(2) eV.

Structure Determination of the Crystalline LiPON Model Structure Li5+x P2 O6-x N1+x with x≈0.9.

Non-crystalline lithium oxonitridophosphate (LiPON) is used as solid electrolyte in all-solid-state batteries. Crystalline lithium oxonitridophosphates are important model structures to retrieve analytical information that can be used to understand amorphous phases better. The new crystalline lithium oxonitridophosphate Li5+x P2 O6-x N1+x was synthesized as an off-white powder by ampoule synthesis at 750-800 °C under Ar atmosphere. It crystallizes in the monoclinic space group P21 /c with a=15.13087(11) Å, b=9.70682(9) Å, c=8.88681(7) Å, and ß=106.8653(8)°. Two P(O,N)4 tetrahedra connected by an N atom form the structural motif [P2 O6-x N1+x ](5+x)- . The structure was elucidated from X-ray diffraction data and the model corroborated by NMR and infrared spectroscopy, and elemental analyses. Measurements of ionic conductivity show a total ionic conductivity of 6.8×10-7 S cm-1 at 75 °C with an activation energy of 0.52±0.01 eV.

Comprehensive Investigation of Anion Species in Crystalline Li+ ion Conductor Li27-x [P4 O7+x N9-x ]O3 (x≈1.9(3)).

The Li+ ion conductor Li27-x [P4 O7+x N9-x ]O3 (x≈1.9) has been synthesized from P3 N5 , Li3 N and Li2 O in a Ta ampoule at 800 °C under Ar atmosphere. The cubic compound crystallizes in space group I 4 ‾ 3 d ${I\overline 4 3d}$ with a=12.0106(14) Å and Z=4. It contains both non-condensed [PO2 N2 ]5- and [PO3 N]4- tetrahedra as well as O2- ions, surrounded by Li+ ions. Charge neutrality is achieved by partial occupancy of Li positions, which was refined with neutron powder diffraction data. Measurements of the partial ionic and electronic conductivity show a total ionic conductivity of 6.6×10-8  S cm-1 with an activation energy of 0.46±0.02 eV and a bulk ionic conductivity of 4×10-6  S cm-1 at 25 °C, which is close to the ionic conductivity of amorphous lithium nitridophosphate. This makes Li27-x [P4 O7+x N9-x ]O3 an interesting candidate for investigation of structural factors affecting ionic conductivity in lithium oxonitridophosphates.

Structure and Ionic Conductivity of Li-Disordered Bismuth o-Thiophosphate Li60-3xBi16+x(PS4)36.

The structure of the first lithium-containing bismuth ortho (o)-thiophosphate was determined using a combination of powder X-ray, neutron, and electron diffraction. Li60-3xBi16+x(PS4)36 with x in the range of 4.1-6.5 possesses a complex monoclinic structure [space group C2/c (No. 15)] and a large unit cell with the lattice parameters a = 15.4866 Å, b = 10.3232 Å, c = 33.8046 Å, and ß = 85.395° for Li44.4Bi21.2(PS4)36, in agreement with the structure as observed by X-ray and neutron pair distribution function analysis. The disordered distribution of lithium ions within the interstices of the dense host structure and the Li ion dynamics and diffusion pathways have been investigated by solid-state nuclear magnetic resonance (NMR) spectroscopy, pulsed field gradient NMR diffusion measurements, and bond valence sum calculations. The total lithium ion conductivities range from 2.6 × 10-7 to 2.8 × 10-6 S cm-1 at 20 °C with activation energies between 0.29 and 0.32 eV, depending on the bismuth content. Despite the highly disordered nature of lithium ions in Li60-3xBi16+x(PS4)36, the underlying dense host framework appears to limit the dimensionality of the lithium diffusion pathways and emphasizes once more the necessity of a close inspection of the structure-property relationships in solid electrolytes.

Carbon nitride-based light-driven microswimmers with intrinsic photocharging ability.

Controlling autonomous propulsion of microswimmers is essential for targeted drug delivery and applications of micro/nanomachines in environmental remediation and beyond. Herein, we report two-dimensional (2D) carbon nitride-based Janus particles as highly efficient, light-driven microswimmers in aqueous media. Due to the superior photocatalytic properties of poly(heptazine imide) (PHI), the microswimmers are activated by both visible and ultraviolet (UV) light in conjunction with different capping materials (Au, Pt, and SiO2) and fuels (H2O2 and alcohols). Assisted by photoelectrochemical analysis of the PHI surface photoreactions, we elucidate the dominantly diffusiophoretic propulsion mechanism and establish the oxygen reduction reaction (ORR) as the major surface reaction in ambient conditions on metal-capped PHI and even with TiO2-based systems, rather than the hydrogen evolution reaction (HER), which is generally invoked as the source of propulsion under ambient conditions with alcohols as fuels. Making use of the intrinsic solar energy storage ability of PHI, we establish the concept of photocapacitive Janus microswimmers that can be charged by solar energy, thus enabling persistent light-induced propulsion even in the absence of illumination-a process we call "solar battery swimming"-lasting half an hour and possibly beyond. We anticipate that this propulsion scheme significantly extends the capabilities in targeted cargo/drug delivery, environmental remediation, and other potential applications of micro/nanomachines, where the use of versatile earth-abundant materials is a key prerequisite.

Single Skyrmion Generation via a Vertical Nanocontact in a 2D Magnet-Based Heterostructure.

Skyrmions have been well studied in chiral magnets and magnetic thin films due to their potential application in practical devices. Recently, monochiral skyrmions have been observed in two-dimensional van der Waals magnets. Their atomically flat surfaces and capability to be stacked into heterostructures offer new prospects for skyrmion applications. However, the controlled local nucleation of skyrmions within these materials has yet to be realized. Here, we utilize real-space X-ray microscopy to investigate a heterostructure composed of the 2D ferromagnet Fe3GeTe2 (FGT), an insulating hexagonal boron nitride layer, and a graphite top electrode. Upon a stepwise increase of the voltage applied between the graphite and FGT, a vertically conducting pathway can be formed. This nanocontact allows the tunable creation of individual skyrmions via single nanosecond pulses of low current density. Furthermore, time-resolved magnetic imaging highlights the stability of the nanocontact, while our micromagnetic simulations reproduce the observed skyrmion nucleation process.

Combining Nitridoborates, Nitrides and Hydrides-Synthesis and Characterization of the Multianionic Sr6 N[BN2 ]2 H3.

Multianionic metal hydrides, which exhibit a wide variety of physical properties and complex structures, have recently attracted growing interest. Here we present Sr6 N[BN2 ]2 H3 , prepared in a solid-state ampoule reaction at 800 °C, as the first combination of nitridoborate, nitride and hydride anions within a single compound. The crystal structure was solved from single-crystal X-ray and neutron powder diffraction data in space group P21 /c (no. 14), revealing a three-dimensional network of undulated layers of nitridoborate units, strontium atoms and hydride together with nitride anions. Magic angle spinning (MAS) NMR and vibrational spectroscopy in combination with quantum chemical calculations further confirm the structure model. Electrochemical measurements suggest the existence of hydride ion conductivity, allowing the hydrides to migrate along the layers.

Covalent Organic Framework Nanoplates Enable Solution-Processed Crystalline Nanofilms for Photoelectrochemical Hydrogen Evolution.

As covalent organic frameworks (COFs) are coming of age, the lack of effective approaches to achieve crystalline and centimeter-scale-homogeneous COF films remains a significant bottleneck toward advancing the application of COFs in optoelectronic devices. Here, we present the synthesis of colloidal COF nanoplates, with lateral sizes of ∼200 nm and average heights of 35 nm, and their utilization as photocathodes for solar hydrogen evolution. The resulting COF nanoplate colloid exhibits a unimodal particle-size distribution and an exceptional colloidal stability without showing agglomeration after storage for 10 months and enables smooth, homogeneous, and thickness-tunable COF nanofilms via spin coating. Photoelectrodes comprising COF nanofilms were fabricated for photoelectrochemical (PEC) solar-to-hydrogen conversion. By rationally designing multicomponent photoelectrode architectures including a polymer donor/COF heterojunction and a hole-transport layer, charge recombination in COFs is mitigated, resulting in a significantly increased photocurrent density and an extremely positive onset potential for PEC hydrogen evolution (over +1 V against the reversible hydrogen electrode), among the best of classical semiconductor-based photocathodes. This work thus paves the way toward fabricating solution-processed large-scale COF nanofilms and heterojunction architectures and their use in solar-energy-conversion devices.

Olefin Metathesis in Confinement: Towards Covalent Organic Framework Scaffolds for Increased Macrocyclization Selectivity.

Covalent organic frameworks (COFs) offer vast structural and chemical diversity enabling a wide and growing range of applications. While COFs are well-established as heterogeneous catalysts, so far, their high and ordered porosity has scarcely been utilized to its full potential when it comes to spatially confined reactions in COF pores to alter the outcome of reactions. Here, we present a highly porous and crystalline, large-pore COF as catalytic support in α,ω-diene ring-closing metathesis reactions, leading to increased macrocyclization selectivity. COF pore-wall modification by immobilization of a Grubbs-Hoveyda-type catalyst via a mild silylation reaction provides a molecularly precise heterogeneous olefin metathesis catalyst. An increased macro(mono)cyclization (MMC) selectivity over oligomerization (O) for the heterogeneous COF-catalyst (MMC:O=1.35) of up to 51 % compared to the homogeneous catalyst (MMC:O=0.90) was observed along with a substrate-size dependency in selectivity, pointing to diffusion limitations induced by the pore confinement.