Synergistic effect of nanomaterials and BMP-2 signalling in inducing osteogenic differentiation of adipose tissue-derived mesenchymal stem cells.

The lack of complete understanding in the signalling pathways that control the osteogenic differentiation of mesenchymal stem cells hinders their clinical application in the reconstruction of large bone defects and non-union bone fractures. The aim of this study is to gain insight into the interactions of bone morphogenetic protein-2 (BMP-2) and bone biomimetic scaffolds in directing osteogenic differentiation of adipose tissue-derived mesenchymal stem cells (ASCs) and the underlying signalling pathways involved. We demonstrated that bioactive glass nanoparticles (nBG) incorporated polycaprolactone (PCL) coating on hydroxyapatite/ß-tricalcium phosphate (HA/TCP) scaffold exerted a synergistic effect with 3days of BMP-2 treatment in promoting osteogenic gene expression levels (Runx-2, collagen I, osteopontin and bone sialoprotein) and alkaline phosphatase activity in ASCs. Furthermore, we revealed that the synergistic effect was mediated through a mechanism of activating ß1-integrin and induction of Wnt-3a autocrine signalling pathways by nBG incorporated scaffold.

Osteopontin Rejuvenates Senescent Adipose-Derived Stem Cells and Restores their Bone Tissue Regenerative Function.

The regenerative function of stem cells is compromised when the proportion of senescent stem cells increases with ageing advance. Therefore, combating stem cell senescence is of great importance for stem cell-based tissue engineering in the elderly, but remains largely unexplored. Osteopontin (OPN), a glycosylated phosphoprotein, is one of the key extracellular matrix molecules in bone tissue. OPN activates various signalling pathways and modulates cellular activities, including cell senescence. However, the role of OPN in stem cell senescence remains largely unknown. This study aims to investigate if OPN modulates cell senescence and bone regenerative function in human adipose-derived mesenchymal stem cells (ASCs), and to determine the underlying mechanisms. We first developed a senescent ASC model using serial passaging until passage 10 (P10), in which senescent cells were characterised by reduced proliferation and osteogenic differentiation capacity compared to P4 ASCs. The conditioned medium from P10 ASCs exhibited a diminished trophic effect on human osteoblasts (HOBs), compared to that from P4 ASCs. P10 ASCs on OPN-coated surface showed rejuvenated phenotype and enhanced osteogenic differentiation. The conditioned medium from P10 ASCs on OPN-coating improved trophic effects on HOBs. OPN regulated the morphology of senescent ASCs, transforming them from a more rounded and flattened cell shape to an elongated shape with a smaller area. These findings demonstrated the effects of OPN in restoring senescent ASCs functions, possibly through a mechanism that involves the modulation of cell morphology, indicating that OPN might hold a great potential for rejuvenating senescent stem cells and could potentially open a new venue for regenerating bone tissue in age-related diseases.

Engineering antibacterial bioceramics: Design principles and mechanisms of action.

The urgency to address skeletal abnormalities and diseases through innovative approaches has led to a significant interdisciplinary convergence of engineering, 3D printing, and design in developing individualised bioceramic bioscaffolds. This review explores into the recent advancements and future trajectory of non-antibiotic antibacterial bioceramics in bone tissue engineering, an importance given the escalating challenges of orthopaedic infections, antibiotic resistance, and emergent pathogens. Initially, the review provides an in-depth exploration of the complex interactions among bacteria, immune cells, and bioceramics in clinical contexts, highlighting the multifaceted nature of infection dynamics, including protein adsorption, immunological responses, bacterial adherence, and endotoxin release. Then, focus on the next-generation bioceramics designed to offer multifunctionality, especially in delivering antibacterial properties independent of traditional antibiotics. A key highlight of this study is the exploration of smart antibacterial bioceramics, marking a revolutionary stride in medical implant technology. The review also aims to guide the ongoing development and clinical adoption of bioceramic materials, focusing on their dual capabilities in promoting bone regeneration and exhibiting antibacterial properties. These next-generation bioceramics represent a paradigm shift in medical implant technology, offering multifunctional benefits that transcend traditional approaches.

Unraveling the influence of channel size and shape in 3D printed ceramic scaffolds on osteogenesis.

Bone has the capacity to regenerate itself for relatively small defects; however, this regenerative capacity is diminished in critical-size bone defects. The development of synthetic materials has risen as a distinct strategy to address this challenge. Effective synthetic materials to have emerged in recent years are bioceramic implants, which are biocompatible and highly bioactive. Yet nothing suitable for the repair of large bone defects has made the transition from laboratory to clinic. The clinical success of bioceramics has been shown to depend not only on the scaffold's intrinsic material properties but also on its internal porous geometry. This study aimed to systematically explore the implications of varying channel size, shape, and curvature in tissue scaffolds on in vivo bone regeneration outcomes. 3D printed bioceramic scaffolds with varying channel sizes (0.3 mm to 1.5 mm), shapes (circular vs rectangular), and curvatures (concave vs convex) were implanted in rabbit femoral defects for 8 weeks, followed by histological evaluation. We demonstrated that circular channel sizes of around 0.9 mm diameter significantly enhanced bone formation, compared to channel with diameters of 0.3 mm and 1.5 mm. Interestingly, varying channel shapes (rectangular vs circular) had no significant effect on the volume of newly formed bone. Furthermore, the present study systematically demonstrated the beneficial effect of concave surfaces on bone tissue growth in vivo, reinforcing previous in silico and in vitro findings. This study demonstrates that optimizing architectural configurations within ceramic scaffolds is crucial in enhancing bone regeneration outcomes. STATEMENT OF SIGNIFICANCE: Despite the explosion of work on developing synthetic scaffolds to repair bone defects, the amount of new bone formed by scaffolds in vivo remains suboptimal. Recent studies have illuminated the pivotal role of scaffolds' internal architecture in osteogenesis. However, these investigations have mostly remained confined to in silico and in vitro experiments. Among the in vivo studies conducted, there has been a lack of systematic analysis of individual architectural features. Herein, we utilized bioceramic 3D printing to conduct a systematic exploration of the effects of channel size, shape, and curvature on bone formation in vivo. Our results demonstrate the significant influence of channel size and curvature on in vivo outcomes. These findings provide invaluable insights into the design of more effective bone scaffolds.

Activation and promotion of adipose stem cells by tumour necrosis factor-α preconditioning for bone regeneration.

There is a major medical need for developing novel and effective approaches for repairing non-union and critical-sized bone defects. Although the mechanisms remain to be determined, it is known that inflammation plays a crucial role in initiating bone repair and regeneration. This study investigated the effect of short-term (3 days) preconditioning with tumor necrosis factor-alpha (TNF-α) on proliferation, mobilization, and differentiation of adipose tissue-derived mesenchymal stem cells (ASCs). We demonstrated that TNF-α pre-conditioning increased proliferation, mobilization, and osteogenic differentiation of ASCs and up-regulated bone morphogenetic protein-2 (BMP-2) protein level. BMP-2 silencing by siRNA partially inhibited osteogenic differentiation of ASCs induced by TNF-α; BMP-2 pre-conditioning also significantly increased osteogenic differentiation of ASCs but the effects were significantly smaller than those observed for TNF-α preconditioning. Furthermore, TNF-α treatment promoted extracellular-signal-regulated kinases(Erk)1/2 and p38 mitogen-activated protein kinase (MAPK) signaling pathways, but only Erk1/2 inhibition reduced the BMP-2 levels and osteogenic differentiation induced by TNF-α preconditioning. Together, these results support the hypothesis that inflammation contributes to bone regeneration by promoting proliferation, mobilization, and osteogenic differentiation of ASCs; 3 days of TNF-α preconditioning, mimicking the short boost of inflammation normally occurring after bone injury, might serve as a feasible approach for directing stem cells into osteogenic differentiation.

Theta-Gel-Reinforced Hydrogel Composites for Potential Tensile Load-Bearing Soft Tissue Repair Applications.

Engineering synthetic hydrogels for the repair and augmentation of load-bearing soft tissues with simultaneously high-water content and mechanical strength is a long-standing challenge. Prior formulations to enhance the strength have involved using chemical crosslinkers where residues remain a risk for implantation or complex processes such as freeze-casting and self-assembly, requiring specialised equipment and technical expertise to manufacture reliably. In this study, we report for the first time that the tensile strength of high-water content (>60 wt.%), biocompatible polyvinyl alcohol hydrogels can exceed 1.0 MPa through a combination of facile manufacturing strategies via physical crosslinking, mechanical drawing, post-fabrication freeze drying, and deliberate hierarchical design. It is anticipated that the findings in this paper can also be used in conjunction with other strategies to enhance the mechanical properties of hydrogel platforms in the design and construction of synthetic grafts for load-bearing soft tissues.

Antisenescence ZIF-8/Resveratrol Nanoformulation with Potential for Enhancement of Bone Fracture Healing in the Elderly.

Accumulation of senescent cells in the elderly impairs bone homeostasis. It is important to alleviate cell senescence and scavenge excessive oxidative stress for enhanced bone fracture healing in elderly patients. In this study, resveratrol (RSV), an antioxidant drug, was encapsulated in a biocompatible zeolitic imidazolate framework-8 (ZIF-8) nanoparticle to protect it from oxidation and improve its bioavailability. Cells responsible for bone healing, including osteoblasts, bone marrow-derived mesenchymal stem cells (BMSCs), macrophages, and endothelial cells, were used to evaluate the regulatory role of the nanoformulation in the alleviation of cellular senescence and promotion of cell functions. It was proved that the nanoformulation sustainably released RSV with well-preserved bioactivity and improved bioavailability. Cell experiments confirmed that ZIF-8/RSV was capable of alleviating the senescence of cells [human osteoblasts (HOBs), BMSCs, H2O2-induced senescent vascular endothelial cells (HUVECs)] and scavenging excessive intracellular reactive oxygen species (ROS). Excitingly, the ZIF-8/RSV improved the osteogenic ability of senescent osteoblasts and promoted macrophage M2 polarization. In addition, the ZIF-8/RSV also enhanced the angiogenic function of senescent HUVECs. More importantly, the ZIF-8/RSV nanoformulation outperformed the REV alone, indicating the critical role of encapsulation using ZIF-8. These findings suggest that the ZIF-8/RSV nanoformulation exhibits potential for bone fracture treatment in elderly patients.

Nicotinamide Mononucleotide Alleviates Osteoblast Senescence Induction and Promotes Bone Healing in Osteoporotic Mice.

Combating the accumulated senescent cells and the healing of osteoporotic bone fractures in the older remains a significant challenge. Nicotinamide mononucleotide (NMN), a precursor of NAD+, is an excellent candidate for mitigating aging-related disorders. However, it is unknown if NMN can alleviate senescent cell induction and enhance osteoporotic bone fracture healing. Here we show that NMN treatment partially reverses the effects of tumor necrosis factor-alpha (TNF-α) on human primary osteoblasts (HOBs): senescent cell induction, diminished osteogenic differentiation ability, and intracellular NAD+ and NADH levels. Mechanistically, NMN restores the mitochondrial dysfunction in HOBs induced by TNF-α evidenced by increased mitochondrial membrane potential and reduced reactive oxidative species and mitochondrial mass. NMN also increases mitophagy activity by down-regulating P62 expression and up-regulating light chain 3B-II protein expression. In addition, the cell senescence protective effects of NMN on HOBs are mitigated by a mitophagy inhibitor (Bafilomycin A1). In vivo, NMN supplementation attenuates senescent cell induction in growth plates, partially prevents osteoporosis in an ovariectomized mouse model, and accelerates bone healing in osteoporotic mice. We conclude that NMN can be a novel and promising therapeutic candidate to enhance bone fracture healing capacity in the older.

Discovering an unknown territory using atom probe tomography: Elemental exchange at the bioceramic scaffold/bone tissue interface.

Here we report the first atom probe study to reveal the atomic-scale composition of in vivo bone formed in a bioceramic scaffold (strontium-hardystonite-gahnite) after 12-month implantation in a large bone defect in sheep tibia. The composition of the newly formed bone tissue differs to that of mature cortical bone tissue, and elements from the degrading bioceramic implant, particularly aluminium (Al), are present in both the newly formed bone and in the original mature cortical bone tissue at the perimeter of the bioceramic implant. Atom probe tomography confirmed that the trace elements are released from the bioceramic and are actively transported into the newly formed bone. NanoSIMS mapping, as a complementary technique, confirmed the distribution of the released ions from the bioceramic into the newly formed bone tissue within the scaffold. This study demonstrated the combined benefits of atom probe and nanoSIMS in assessing nanoscopic chemical composition changes at precise locations within the tissue/biomaterial interface. Such information can assist in understanding the interaction of scaffolds with surrounding tissue, hence permitting further iterative improvements to the design and performance of biomedical implants, and ultimately reducing the risk of complications or failure while increasing the rate of tissue formation. STATEMENT OF SIGNIFICANCE: The repair of critical-sized load-bearing bone defects is a challenge, and precisely engineered bioceramic scaffold implants is an emerging potential treatment strategy. However, we still do not understand the effect of the bioceramic scaffold implants on the composition of newly formed bone in vivo and surrounding existing mature bone. This article reports an innovative route to solve this problem, the combined power of atom probe tomography and nanoSIMS is used to spatially define elemental distributions across bioceramic implant sites. We determine the nanoscopic chemical composition changes at the Sr-HT Gahnite bioceramic/bone tissue interface, and importantly, provide the first report of in vivo bone tissue chemical composition formed in a bioceramic scaffold.

Bone biomimetic microenvironment induces osteogenic differentiation of adipose tissue-derived mesenchymal stem cells.

A critical strategy for tissue engineering is to provide the signals necessary for tissue regeneration by mimicking the tissue microenvironment. In this study, we mimicked (1) the bone chemical and the physical microenvironment by fabricating a three-dimensional nanocomposite scaffold composed of biphasic calcium phosphates (BCP) coated with a nanocomposite layer of polycaprolactone (PCL) and hydroxyapatite nanoparticles (nHA) (BCP/PCL-nHA)), and (2) the bone's biological microenvironment by co-culturing with primary human osteoblasts (HOBs), and then investigated their effects on osteogenic differentiation of adipose tissue-derived stem cells (ASCs). In comparison with the ASCs cultured alone on BCP scaffolds that were coated only with PCL, early osteogenic differentiation of ASCs was induced by either seeding ASCs on BCP/PCL-nHA scaffolds or by co-culturing with HOBs; the combination of BCP/PCL-nHA scaffold and HOBs resulted in the synergistic enhancement of osteogenic gene expression. Moreover, we found that BCP/PCL-nHA scaffolds induced early osteogenic differentiation of ASCs through integrin-α2 and an extracellular signal-regulated kinase (ERK) signaling pathway. FROM THE CLINICAL EDITOR: The authors mimicked the physico-chemical environment of bone by fabricating a nanocomposite scaffold, and then co-cultured it with human osteoblasts. Demonstrated enhancement of osteogenic gene expression and early osteogenic differentiation of adipose tissue derived stem cells were found using this approach.

Promise and Perspective of Nanomaterials in Antisenescence Tissue Engineering Applications.

The tissue engineering approach for repair and regeneration has achieved significant progress over the past decades. However, challenges remain in developing strategies to solve the declined or impaired innate cell and tissue regeneration capacity that occurs with aging. Cellular senescence is a key mechanism underlying organismal aging and is responsible for the declined tissue regeneration capacity in the aging population. Therefore, to promote the diminished tissue regeneration ability in the aged population, it is critical to developing a feasible and promising strategy to target senescent cells. Recent advances in nanomaterials have revolutionized biomedical applications ranging from biosensing to bioimaging and targeted drug delivery. In this perspective, we review and discuss the nature and influences of cell-intrinsic and cell-extrinsic factors on reduced regenerative abilities through aging and how nanotechnology can be a therapeutic avenue to sense, rejuvenate, and eliminate senescent cells, thereby improving the tissue regeneration capacity in the aging population.

Low-Temperature Synthesis of Hollow ß-Tricalcium Phosphate Particles for Bone Tissue Engineering Applications.

ß-Tricalcium phosphate (ß-TCP) has been extensively used in bone tissue engineering in the form of scaffolds, granules, or as reinforcing phase in organic matrices. Solid-state reaction route at high temperatures (>1000 °C) is the most widely used method for the preparation of ß-TCP. The high-temperature synthesis, however, results in the formation of hard agglomerates and fused particles which necessitates postprocessing steps such as milling and sieving operations. This, inadvertently, could lead to introducing unwanted trace elements, promoting particle shape irregularity as well as compromising the biodegradability and bioactivity of ß-TCP because of the solid microstructure of particles. In this study, we introduce a one-pot wet-chemical method at low temperatures (between 160 and 170 °C) to synthesize hollow ß-TCP (hß-TCP) submicron particles of an average size of 300 nm with a uniform rhombohedral shape. We assessed the cytocompatibility of the hß-TCP using primary human osteoblasts (HOB), adipose-derived stem cells (ADSC), and antigen-presenting cells (APCs). We demonstrate the bioactivity of the hß-TCP when cultured with HOB, ADSC, and APCs at a range of particle concentrations (up to 1000 µg/mL) for up to 7 days. hß-TCP significantly enhances osteogenic differentiation of ADSC without the addition of osteogenic supplements. These findings offer a new type of ß-TCP particles prepared at low temperatures, which present various opportunities for developing ß-TCP based biomaterials.

Tuneable manganese oxide nanoparticle based theranostic agents for potential diagnosis and drug delivery.

Among various magnetic nanoparticles, manganese oxide nanoparticles are considered as established T 1 magnetic resonance imaging (MRI) contrast agents for preclinical research. The implications of their degradation properties and use as therapeutic carriers in drug delivery systems have not been explored. In addition, how the chemical composition and size of manganese oxide nanoparticles, as well as the surrounding environment, influence their degradation and MRI contrast properties (T 1 vs. T 2) have not been studied in great detail. A fundamental understanding of their characteristic properties, such as degradation, is highly desirable for developing simultaneous diagnosis and therapeutic solutions. Here, we demonstrate how the precursor type and reaction environment affect the size and chemical composition of manganese oxide nanoparticles and evaluate their influence on the nanoparticle degradability and release of the drug l-3,4-dihydroxyphenylalanine (l-dopa). The results show that the degradation rate (and the associated release of drug l-dopa molecules) of manganese oxide nanoparticles depends on their size, composition and the surrounding environment (aqueous or biometric fluid). The dependence of MRI relaxivities of manganese oxide nanoparticles on the size, chemical composition and nanoparticle degradation in water is also established. A preliminary cell viability study reveals the cytocompatible properties of l-dopa functionalized manganese oxide nanoparticles. Overall, this work provides new insights into smartly designed manganese oxide nanoparticles with multitasking capabilities to target bioimaging and therapeutic applications.

Influence of carbon dot synthetic parameters on photophysical and biological properties.

Recently, carbon dots (CDs) have been widely investigated for biological applications in imaging. One-step hydrothermal synthesis is considered to be one of the most promising methods for the synthesis of CDs, due to its simple and rapid manipulation, flexible selection of ingredients, environmentally friendly conditions, and low-cost. A number of synthetic and post-synthetic parameters, including solvent, heating time, dopant quantity, and particle size distribution, play a crucial role in controlling the size and surface structure of CDs, which ultimately have influence on their photophysical and biological behavior. Despite the crucial role of each of these parameters in defining the yield and nature of synthesized CDs, they have not previously been rigorously optimized, particularly with respect to desired biological applications. Herein, we report our comprehensive optimization of the parameters employed for the hydrothermal synthesis of CDs to gain a better understanding of the effect of these parameters on optical properties, cytotoxicity, and cellular uptake efficiency. Furthermore, this work will open up new pathways toward the design of CDs with physiochemical properties tailored for specific biomedical applications such as bioimaging.

Development of a bioactive and radiopaque bismuth doped baghdadite ceramic for bone tissue engineering.

Baghdadite (Ca3ZrSi2O9, BAG), is a Zr-doped calcium silicate that has outstanding bioactivity both in vitro and in vivo. Bioceramic scaffolds should be sufficiently radiopaque to be distinguishable in vivo from surrounding bone structures. To enhance the radiopacity of BAG, this study investigated the effect of incorporating bismuth ions into its crystalline structure (BixCa3-xZrSi2O9, x = 0, 0.1, 0.2, 0.5; BAG, Bi0.1-BAG, Bi0.2-BAG, Bi0.5-BAG, respectively). Monophasic baghdadite was retained after bismuth ion incorporation up to x = 0.2 at calcination temperatures of 1350 °C. When pressed and sintered, energy dispersive x-ray spectroscopy showed that BAG and Bi0.1-BAG retained crystalline homogeneity, but Bi0.2-BAG formed zirconium-rich crystalline regions. BAG, Bi0.1-BAG and Bi0.2-BAG exhibited non-degradation after 56 days of immersion in culture medium. Bi0.1-BAG exhibited the lowest change in culture medium pH (+0.0), compared to BAG (+0.7) and Bi0.2-BAG (+0.2) after 56 days of culture media immersion. Bi0.1-BAG exhibited similar strength and modulus to BAG (σ: 200-290 MPa; E: 4-5 GPa), and significantly higher compressive strength and modulus versus Bi0.2-BAG (σ: 150-200 MPa; E: 3.5-4 GPa) across 56 days of aqueous immersion. In vitro studies using primary human bone derived cells (HOBs) demonstrated a significant increase in HOBs proliferation when cultured on Bi0.1-BAG for seven days compared to BAG and Bi0.2-BAG. Importantly, Bi0.1-BAG showed increased radiopacity by ~33%, when compared to BAG, and by ~115% when compared to biphasic calcium phosphate. The properties of Bi0.1-BAG show promise for its use as a bioactive ceramic with sufficient radiopacity for treatment of bone defects.

Nature-inspired topographies on hydroxyapatite surfaces regulate stem cells behaviour.

Surface topography is one of the key factors in regulating interactions between materials and cells. While topographies presented to cells in vivo are non-symmetrical and in complex shapes, current fabrication techniques are limited to replicate these complex geometries. In this study, we developed a microcasting technique and successfully produced imprinted hydroxyapatite (HAp) surfaces with nature-inspired (honeycomb, pillars, and isolated islands) topographies. The in vitro biological performance of the developed non-symmetrical topographies was evaluated using adipose-derived stem cells (ADSCs). We demonstrated that ADSCs cultured on all HAp surfaces, except honeycomb patterns, presented well-defined stress fibers and expressed focal adhesion protein (paxillin) molecules. Isolated islands topographies significantly promoted osteogenic differentiation of ADSCs with increased alkaline phosphatase activity and upregulation of key osteogenic markers, compared to the other topographies and the control unmodified (flat) HAp surface. In contrast, honeycomb topographies hampered the ability of the ADSCs to proliferate and differentiate to the osteogenic lineage. This work presents a facile technique to imprint nature-derived topographies on the surface of bioceramics which opens up opportunities for the development of bioresponsive interfaces in tissue engineering and regenerative medicine.

Baghdadite coating formed by hybrid water-stabilized plasma spray for bioceramic applications: Mechanical and biological evaluations.

This work studies the mechanical and biological properties of Baghdadite (BAG, Ca3ZrSi2O9) coating manufactured on Ti6Al4V substrates by hybrid water-stabilized plasma spray (WSP-H). Hydroxyapatite (HAp, Ca10(PO4)6(OH)2) coating was produced by gas-stabilized atmospheric plasma spray and used as a reference material. Upon spraying, the BAG coating exhibited lower crystallinity than the HAp coating. Mechanical testing demonstrated superior properties of the BAG coating: its higher hardness, elastic modulus as well as a better resistance to scratch and wear. In the cell viability study, the BAG coating presented better human osteoblast attachment and proliferation on the coating surface after three days and seven days compared to the HAp counterpart. Furthermore, the gene expression study of human osteoblasts indicated that the BAG coating surface showed higher expression levels of osteogenic genes than those on the HAp coating. Overall, this study indicates that enhanced mechanical and bioactive properties can be achieved for the BAG coating compared to the benchmark HAp coating. It is therefore concluded here that the BAG coating is a potential candidate for coating orthopedic implants.

Nanosurfacing Ti alloy by weak alkalinity-activated solid-state dewetting (AAD) and its biointerfacial enhancement effect.

Nanoscale manipulation of material surfaces can create extraordinary properties, holding great potential for modulating the implant-bio interface for enhanced performance. In this study, a green, simple and biocompatible nanosurfacing approach based on weak alkalinity-activated solid-state dewetting (AAD) was for the first time developed to nano-manipulate the Ti6Al4V surface by atomic self-rearrangement. AAD treatment generated quasi-periodic titanium oxide nanopimples with high surface energy. The nanopimple-like nanostructures enhanced the osteogenic activity of osteoblasts, facilitated M2 polarization of macrophages, and modulated the cross-talk between osteoblasts and macrophages, which collectively led to significant strengthening of in vivo bone-implant interfacial bonding. In addition, the titanium oxide nanopimples strongly adhered to the Ti alloy, showing resistance to tribocorrosion damage. The results suggest strong nano-bio interfacial effects, which was not seen for the control Ti alloy processed through traditional thermal oxidation. Compared to other nanostructuring strategies, the AAD technique shows great potential to integrate high-performance, functionality, practicality and scalability for surface modification of medical implants.

Beta-tricalcium phosphate exerts osteoconductivity through alpha2beta1 integrin and down-stream MAPK/ERK signaling pathway.

Beta-tricalcium phosphate (beta-TCP) has been clinically used as a bone graft substitute for decades because of its excellent osteoconductivity. However, the exact mechanism(s) by which beta-TCP exerts osteoconductivity are not fully documented. This study was aimed to investigate the molecular mechanism(s) by which beta-TCP modulates the biological response of primary human osteoblasts (HOBs). It was showed that HOBs seeded into the beta-TCP scaffolds expressed significantly higher levels of osteogenic genes, compared to those cultured on tissue culture plastic; meanwhile these cells showed 7-fold increase in alpha2 integrin subunit gene expression and the activation of the mitogen-activated protein kinase (MAPK)/extracellular related kinase (ERK) signaling pathway. In addition, the osteogenic conduction by beta-TCP scaffolds was attenuated directly by inhibiting MAPK/ERK or indirectly by blocking the alpha2beta1 integrin signaling pathway. We concluded that beta-TCP scaffold exerts osteoconductivity through alpha2beta1 integrin and down-stream MAPK/ERK signaling pathway, suggesting a feasible approach to consider when designing or fabricating the scaffolds for bone tissue engineering.

Two-Photon Dual-Emissive Carbon Dot-Based Probe: Deep-Tissue Imaging and Ultrasensitive Sensing of Intracellular Ferric Ions.

Carbon dots (CDs)-based nanoparticles have been extensively explored for biological applications in sensing and bioimaging. However, the major translational barriers to CDs for imaging and sensing applications include synthetic strategies to obtain monodisperse CDs with tunable structural, electronic, and optical properties in order to achieve high-resolution deep-tissue imaging, intracellular detection, and sensing of metal ions with high sensitivity down to nanomolar levels. Herein, we report a novel strategy to synthesize and develop a multifunctional nitrogen-doped CDs probe of different sizes using a new combination of carbon and nitrogen sources. Our results show that the structural characteristics (i.e., the surface density of emissive traps and bandgaps levels) depend on the size of the CDs, which ultimately influences their optical properties. This work also demonstrates the development of a two-photon dual-emissive fluorescent multifunctional probes (3-FCDs) by conjugating fluorescein isothiocyanate on the surface of nitrogen-doped CDs. 3-FCDs show excellent near-infrared two-photon excitation ability, single-wavelength excitation, high photostability, biocompatibility, low cytotoxicity, and good cell permeability. Using two-photon fluorescence imaging, our multifunctional probe shows excellent deep-tissue high-resolution imaging capabilities with penetration depth up to 3000 and 280 µm in hydrogel scaffold and pigskin tissue, respectively. The designed probe exhibits ultrasensitivity and specificity toward Fe3+ ions with a remarkable detection limit of 2.21 nM using two-photon excitation. In addition, we also demonstrate the use of multifunctional CDs probe for ultrasensitive exogenous and real-time endogenous sensing of Fe3+ ions and imaging in live fibroblasts with rapid response times for intracellular ferric ion detection.