Strained-layer-superlattice-based compact thermal imager for the International Space Station.

The compact thermal imager (CTI) is a dual-band, strained-layer-superlattice (SLS) detector-based instrument that was installed on the exterior of the International Space Station (ISS) in conjunction with the third Robotic Refueling Mission 3 (RRM3) in 2018. The CTI serves as a pathfinder for future thermal infrared capability on Landsat. The CTI incorporates an SLS hybrid, a dual-band 3-5 and 8-10 µm, electrically switchable, 320×256 array with 30 µm2 pixels, bonded to an Indigo ISC0903 Readout Integrated Circuit (ROIC). The telescope was built around an integrated detector cryocooler assembly developed under a NASA Small Business Innovative Research award with QmagiQ, LLC. The cooler is a Ricor K508 and the front-end optics is a custom-designed, doublet lens telescope with a 150 mm focal length. The ground resolution is 80 meters/pixel from the ISS altitude of 400 km. A filter creates two spectral channels from the dual bands, 3.3-5.4 and 7.8-10.2 µm. The detector hybrid control electronics is a custom-developed system based on the Teledyne Imaging Systems SIDECAR Application-Specific Integrated Circuit. This module provides the electronic interface from the RRM3 SpaceCube on-board processor to the detector/ROIC assembly. The primary goal of this mission was to perform a technology demonstration of the SLS technology and the commercial cooler technology elevating the Technology Readiness Level (TRL) to TRL 9 on a bare-bones budget and relatively fast development cycle. Some science objectives include locating fires, approximating land surface temperatures, and monitoring evapotranspiration, sea ice, and glacier dynamics. In this paper, we will present the design of the focal plane, optics, electronics, and mechanical structure of the CTI. We will also describe the operation and qualification tests that were performed to bring the CTI to the NASA TRL 6 in preparation for the launch on a SpaceX Dragon from the Kennedy Space Center.

Hemilabile Bridging Thiolates as Proton Shuttles in Bioinspired H2 Production Electrocatalysts.

Synthetic analogues and computationally assisted structure-function analyses have been used to explore the features that control proton-electron and proton-hydride coupling in electrocatalysts inspired by the [NiFe]-hydrogenase active site. Of the bimetallic complexes derived from aggregation of the dithiolato complexes MN2S2 (N2S2 = bismercaptoethane diazacycloheptane; M = Ni or Fe(NO)) with (η5-C5H5)Fe(CO)+ (the Fe' component) or (η5-C5H5)Fe(CO)2+, Fe″, which yielded Ni-Fe'+, Fe-Fe'+, Ni-Fe″+, and Fe-Fe″+, respectively, both Ni-Fe'+ and Fe-Fe'+ were determined to be active electrocatalysts for H2 production in the presence of trifluoroacetic acid. Correlations of electrochemical potentials and H2 generation are consistent with calculated parameters in a predicted mechanism that delineates the order of addition of electrons and protons, the role of the redox-active, noninnocent NO ligand in electron uptake, the necessity for Fe'-S bond breaking (or the hemilability of the metallodithiolate ligand), and hydride-proton coupling routes. Although the redox active {Fe(NO)}7 moiety can accept and store an electron and subsequently a proton (forming the relatively unstable Fe-bound HNO), it cannot form a hydride as the NO shields the Fe from protonation. Successful coupling occurs from a hydride on Fe' with a proton on thiolate S and requires a propitious orientation of the H-S bond that places H+ and H- within coupling distance. This orientation and coupling barrier are redox-level dependent. While the Ni-Fe' derivative has vacant sites on both metals for hydride formation, the uptake of the required electron is more energy intensive than that in Fe-Fe' featuring the noninnocent NO ligand. The Fe'-S bond cleavage facilitated by the hemilability of thiolate to produce a terminal thiolate as a proton shuttle is a key feature in both mechanisms. The analogous Fe″-S bond cleavage on Ni-Fe″ leads to degradation.

Ligand Displacement Reaction Paths in a Diiron Hydrogenase Active Site Model Complex.

The mechanism and energetics of CO, 1-hexene, and 1-hexyne substitution from the complexes (SBenz)2 [Fe2 (CO)6 ] (SBenz=SCH2 Ph) (1-CO), (SBenz)2 [Fe2 (CO)5 (η(2) -1-hexene)] (1-(η(2) -1-hexene)), and (SBenz)2 [Fe2 (CO)5 (η(2) -1-hexyne)] (1-(η(2) -1-hexyne)) were studied by using time-resolved infrared spectroscopy. Exchange of both CO and 1-hexyne by P(OEt)3 and pyridine, respectively, proceeds by a bimolecular mechanism. As similar activation enthalpies are obtained for both reactions, the rate-determining step in both cases is assumed to be the rotation of the Fe(CO)2 L (L=CO or 1-hexyne) unit to accommodate the incoming ligand. The kinetic profile for the displacement of 1-hexene is quite different than that for the alkyne and, in this case, both reaction channels, that is, dissociative (SN 1) and associative (SN 2), were found to be competitive. Because DFT calculations predict similar binding enthalpies of alkene and alkyne to the iron center, the results indicate that the bimolecular pathway in the case of the alkyne is lower in free energy than that of the alkene. In complexes of this type, subtle changes in the departing ligand characteristics and the nature of the mercapto bridge can influence the exchange mechanism, such that more than one reaction pathway is available for ligand substitution. The difference between this and the analogous study of (µ-pdt)[Fe(CO)3 ]2 (pdt=S(CH2 )3 S) underscores the unique characteristics of a three-atom S-S linker in the active site of diiron hydrogenases.

Catalysis and Mechanism of H2 Release from Amine-Boranes by Diiron Complexes.

Studies focused on the dehydrogenation of amine-borane by diiron complexes that serve as well-characterized rudimentary models of the diiron subsite in [FeFe]-hydrogenase are reported. Complexes of formulation (µ-SCH2XCH2S)[Fe(CO)3]2, with X = CH2, CMe2, CEt2, NMe, NtBu, and NPh, 1-CO through 6-CO, respectively, were determined to be photocatalysts for release of H2 gas from a solution of H3B ← NHMe2 (B:A(s)), dissolved in THF. The thermal displacement of the tertiary amine-borane, H3B ← NEt3 (B:A(t)) from photochemically generated (µ-SCH2XCH2S)[Fe(CO)3][Fe(CO)2(µ-H)(BH2-NEt3)], 1-B:A(t) through 6-B:A(t), by P(OEt)3 was monitored by time-resolved FTIR spectroscopy. Rates and activation barriers for this substitution reaction were consistent with a dissociative mechanism for the alkylated bridgehead species 2-CO through 6-CO, and associative or interchange for 1-CO. DFT calculations supported an intermediate [I] for the dissociative process featuring a coordinatively unsaturated diiron complex stabilized by an agostic interaction between the metal center and the C-H bond of an alkyl group on the central bridgehead atom of the SRS linker. The rate of H2 production from the initially formed 1-B:A(s) through 6-B:A(s) complexes was inversely correlated with the lifetime of the analogous 1-B:A(t) through 6-B:A(t) adducts. Possible mechanisms are presented which feature involvement of the pendent nitrogen base as well as a separate mechanism for the all carbon bridgeheads.

Metallodithiolates as ligands to dinitrosyl iron complexes: toward the understanding of structures, equilibria, and spin coupling.

Metallodithiolate ligands are used to design heterobimetallic complexes by adduct formation through S-based reactivity. Such adducts of dinitrosyl iron were synthesized with two metalloligands, namely, Ni(bme-daco) and V≡O(bme-daco) (bme-daco = bismercaptoethane diazacyclooctane), and, for comparison, an N-heterocyclic carbene, namely, 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (Imes), by cleavage of the (µ-I)2[Fe(NO)2]2 dimer of electronic configuration {Fe(NO)2}(9) (Enemark-Feltham notation). With Fe(NO)2I as Lewis acid acceptor, 1:1 adducts resulted for both the IMes·Fe(NO)2I, complex 2, and V≡O(bme-daco)·Fe(NO)2I, complex 4. The NiN2S2 demonstrated binding capability at both thiolates, with two Fe(NO)2I addenda positioned transoid across the NiN2S2 square plane, Ni(bme-daco)·2(Fe(NO)2I), complex 3. Enhanced binding ability was realized for the dianionic vanadyl dithiolate complex, [Et4N]2[V≡O(ema)], (ema = N,N'-ethylenebis(2-mercaptoacetamide)), which, unlike the neutral (V≡O)N2S2, demonstrated reactivity with the labile tungsten carbonyl complex, cis-W(CO)4(pip)2, (pip = piperidine), yielding [Et4N]2[V≡O(ema)W(CO)4], complex 1, whose ν(CO) IR values indicated the dianionic vanadyl metalloligand to be of similar donor ability to the neutral NiN2S2 ligands. The solid-state molecular structures of 1-4 were determined by X-ray diffraction analyses. Electron paramagnetic resonance (EPR) measurements characterize the {Fe(NO)2}(9) complexes in solution, illustrating superhyperfine coupling via the (127)I to the unpaired electron on iron for complex 2. The EPR characterizations of 3 [Ni(bme-daco)·2(Fe(NO)2I)] and 4 [V≡O(bme-daco)·Fe(NO)2I] indicate these complexes are EPR silent, likely due to strong coupling between paramagnetic centers. Within samples of complex 4, individual paramagnetic centers with localized superhyperfine coupling from the (51)V and (127)I are observed in a 3:1 ratio, respectively. However, spin quantitation reveals that these species represent a minor fraction (<10%) of the total complex and thus likely represent disassociated paramagnetic sites. Computational studies corroborated the EPR assignments as well as the experimentally observed stability/instability of the heterobimetallic DNIC complexes.

12C/13C ratio in ethane on titan and implications for methane's replenishment.

The (12)C/(13)C abundance ratio in ethane in the atmosphere of Titan has been measured at 822 cm(-1) from high spectral resolution ground-based observations. The value, 89(8), coincides with the telluric standard and also agrees with the ratio seen in the outer planets. It is almost identical to the result for ethane on Titan found by the composite infrared spectrometer (CIRS) on Cassini. The (12)C/(13)C ratio for ethane is higher than the ratio measured in atmospheric methane by Cassini/Huygens GCMS, 82.3(1), representing an enrichment of (12)C in the ethane that might be explained by a kinetic isotope effect of approximately 1.1 in the formation of methyl radicals. If methane is being continuously resupplied to balance photochemical destruction, then we expect the isotopic composition in the ethane product to equilibrate at close to the same (12)C/(13)C ratio as that in the supply. The telluric value of the ratio in ethane then implies that the methane reservoir is primordial.

Comparisons of MN2S2vs. bipyridine as redox-active ligands to manganese and rhenium in (L-L)M'(CO)3Cl complexes.

The bipyridine ligand is renowned as a photo- and redox-active ligand in catalysis; the latter has been particularly explored in the complex Re(bipy)(CO)3Cl for CO2 reduction. We ask whether a bidentate, redox-active MN2S2 metallodithiolate ligand in heterobimetallic complexes of Mn and Re might similarly serve as a receptor and conduit of electrons. In order to assess the electrochemical features of such designed bimetallics, a series of complexes featuring redox active MN2S2 metallodithiolates, with M = Ni2+, {Fe(NO)}2+, and {Co(NO)}2+, bound to M'(CO)3X, where M' = Mn and Re, were synthesized and characterized using IR and EPR spectroscopies, X-ray diffraction, cyclic voltammetry, and density functional theory (DFT) computations. Butterfly type structures resulted from binding of the convergent lone pairs of the cis-sulfur atoms to the M'(CO)3X unit. Bond distances and angles are similar across the M' metal series regardless of the ligand attached. Electrochemical characterizations of [MN2S2·Re(CO)3Cl] showed the redox potential of the Re is significantly altered by the identity of the metal in the N2S2 pocket. DFT calculations proved useful to identify the roles played by the MN2S2 ligands, upon reduction of the bimetallics, in altering the lability of the Re-Cl bond and the ensuing effect on the reduction of ReI to Re0.

Cyanide-bridged iron complexes as biomimetics of tri-iron arrangements in maturases of the H cluster of the di-iron hydrogenase.

Developing from certain catalytic processes required for ancient life forms, the H2 processing enzymes [NiFe]- and [FeFe]-hydrogenase (H2ase) have active sites that are organometallic in composition, possessing carbon monoxide and cyanide as ligands. Simple synthetic analogues of the 2Fe portion of the active site of [FeFe]-H2ase have been shown to dock into the empty carrier (maturation) protein, apo-Hyd-F, via the bridging ability of a terminal cyanide ligand from a low valent FeIFeI unit to the iron of a 4Fe4S cluster of Hyd-F, with spectral evidence indicating CN isomerization during the coupling process (Berggren, et al., Nature, 2013, 499, 66-70). To probe the requirements for such cyanide couplings, we have prepared and characterized four cyanide-bridged analogues of 3-Fe systems with features related to the organoiron moiety within the loaded HydF protein. As in classical organometallic chemistry, the orientation of the CN bridge in the biomimetics is determined by the precursor reagents; no cyanide flipping or linkage isomerization was observed. Density functional theory computations evaluated the energetics of cyanide isomerization in such [FeFe]-CN-Fe ⇌ [FeFe]-NC-Fe units, and found excessively high barriers account for the failure to observe the alternative isomers. These results highlight roles for cyanide as an unusual ligand in biology that may stabilize low spin iron in [FeFe]-hydrogenase, and can act as a bridge connecting multi-iron units during bioassembly of the active site.

Versatile N2S2 nickel-dithiolates as mono- and bridging bidentate, S-donor ligands to gold(I).

Development of square planar cis-dithiolate nickel complexes as metallo S-donor ligands focuses on the synthesis and structures of gold(I) heterometallic clusters derived from assemblage with three NiN2S2 complexes: Ni(bme-daco), Ni(bme-dach) and Ni(ema)(2-) (bme-daco = (bismercaptoethanediazacyclooctane); bme-dach = bismercaptoethanediazacycloheptane; and ema = N,N'-ethylenebis-2-mercaptoacetamide). With Ph3PAuCl as the gold source, examples of simple S-aurolation retaining the PPh3 on Au(+) were obtained for [{Ni(bme-daco)}AuPPh3](+)Cl(-) and [{Ni(ema)}2Au4(PPh3)4], where the latter complex demonstrated unsupported aurophilic interactions between [{Ni(ema)}Au2(PPh3)2] units in its X-ray crystal structure (Au-Au = 3.054 and 3.127 Å). Three compounds containing fully-supported digold units with Au-Au distances in the aurophilic range of 3.11 to 3.13 Å were found as stair-step structures in which planar NiN2S2 step treads are connected by planar S2Au2S2 risers at ca. 90°: [{Ni(bme-daco)}2Au2](2+)(Cl(-))2; [{Ni(bme-dach)}2Au2](2+)(Cl(-))2; and (Et4N(+))2[{Ni(ema)}2Au2](2-). Electrochemical data from cyclic voltammograms demonstrated a positive shift in Ni(II/I) couples for the [{NiN2S2}xAuy] complexes as compared to the NiN2S2 precursors and a ca. 700 mV decrease in communication between multiple NiN2S2 units as compared to [{NiN2S2}2Ni](2+) analogues in slant chair conformation. The analogy between NiN2S2 metallodithiolate ligands and diphosphine ligands holds here as in other examples of inorganic and organometallic complexes.

Polar lightning and decadal-scale cloud variability on Jupiter.

Although lightning has been seen on other planets, including Jupiter, polar lightning has been known only on Earth. Optical observations from the New Horizons spacecraft have identified lightning at high latitudes above Jupiter up to 80 degrees N and 74 degrees S. Lightning rates and optical powers were similar at each pole, and the mean optical flux is comparable to that at nonpolar latitudes, which is consistent with the notion that internal heat is the main driver of convection. Both near-infrared and ground-based 5-micrometer thermal imagery reveal that cloud cover has thinned substantially since the 2000 Cassini flyby, particularly in the turbulent wake of the Great Red Spot and in the southern half of the equatorial region, demonstrating that vertical dynamical processes are time-varying on seasonal scales at mid- and low latitudes on Jupiter.