RESUMO
Photodynamic therapy (PDT) involves a photosensitizing agent activated with light to induce cell death. Two-photon excited PDT (TPE-PDT) offers numerous benefits compared to traditional one-photon induced PDT, including an increased penetration depth and precision. However, the in vitro profiling and comparison of two-photon photosensitizers (PS) are still troublesome. Herein, we report the development of an in vitro screening platform of TPE-PS using a 3D osteosarcoma cell culture. The platform was tested using three different two-photon (2P) active compounds - a 2P sensitizer P2CK, a fluorescent dye Eosin Y, and a porphyrin derivative (TPP). Their 2P absorption cross-sections (σ2PA) were characterised using a fully automated z-scan setup. TPP exhibited a remarkably high σ2PA at 720 nm (8865 GM) and P2CK presented a high absorption at 850 nm (405 GM), while Eosin Y had the lowest 2P absorption at the studied wavelengths (<100 GM). The cellular uptake of PS visualized using confocal laser scanning microscopy showed that both TPP and P2CK were internalized by the cells, while Eosin Y stayed mainly in the surrounding media. The efficiency of the former two TPE-PS was quantified using the PrestoBlue metabolic assay, showing a significant reduction in cell viability after two-photon irradiation. The possibility of damage localization was demonstrated using a co-culture of adipose derived stem cells together with osteosarcoma spheroids showing no signs of damage to the surrounding healthy cells after TPE-PDT.
Assuntos
Antineoplásicos/farmacologia , Compostos de Benzilideno/farmacologia , Amarelo de Eosina-(YS)/farmacologia , Fármacos Fotossensibilizantes/farmacologia , Porfirinas/farmacologia , Antineoplásicos/efeitos da radiação , Antineoplásicos/toxicidade , Compostos de Benzilideno/efeitos da radiação , Compostos de Benzilideno/toxicidade , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Cisplatino/farmacologia , Amarelo de Eosina-(YS)/efeitos da radiação , Amarelo de Eosina-(YS)/toxicidade , Humanos , Células-Tronco Mesenquimais , Osteossarcoma/tratamento farmacológico , Fótons , Fármacos Fotossensibilizantes/efeitos da radiação , Fármacos Fotossensibilizantes/toxicidade , Porfirinas/efeitos da radiação , Porfirinas/toxicidadeRESUMO
Photodegradable hydrogels have emerged as useful platforms for research on cell function, tissue engineering, and cell delivery as their physical and chemical properties can be dynamically controlled by the use of light. The photo-induced degradation of such hydrogel systems is commonly based on the integration of photolabile o-nitrobenzyl derivatives to the hydrogel backbone, because such linkers can be cleaved by means of one- and two-photon absorption. Herein we describe a cytocompatible click-based hydrogel containing o-nitrobenzyl ester linkages between a hyaluronic acid backbone, which is photodegradable in the presence of cells. It is demonstrated for the first time that by using a cyclic benzylidene ketone-based small molecule as photosensitizer the efficiency of the two-photon degradation process can be improved significantly. Biocompatibility of both the improved two-photon micropatterning process as well as the hydrogel itself is confirmed by cell culture studies.
Assuntos
Compostos de Benzilideno/química , Materiais Biocompatíveis/química , Ácido Hialurônico/química , Hidrogéis/química , Fotólise , Polietilenoglicóis/química , Linhagem Celular , Química Click , Humanos , Células-Tronco Mesenquimais/citologia , Nitrobenzenos/química , Fótons , Fármacos Fotossensibilizantes/química , Compostos de Sulfidrila/química , Engenharia TecidualRESUMO
A photolabile ruthenium-based complex, [Ru(bpy)2 (4AMP)2 ](PF6 )2 , (4AMP=4-(aminomethyl)pyridine) is incorporated into polyurea organo- and hydrogels via the reactive amine moieties on the photocleavable 4AMP ligands. While showing long-term stability in the dark, cleavage of the pyridine-ruthenium bond upon irradiation with visible or near-infrared irradiation (in a two-photon process) leads to rapid de-gelation of the supramolecular gels, thus enabling spatiotemporal micropatterning by photomasking or pulsed NIR-laser irradiation.
RESUMO
A generally applicable direct synthesis of cyanoarenes from quinones is presented. Particular emphasis is placed on the preparation of precursors and target molecules relevant for organic materials, including halogenated cyanoarenes and larger cyanated acenes. The reaction and work-up protocols are adjusted for the challenges presented by the different substrates and products. Screening results of the initial reaction optimization are given to further facilitate adaptation to other synthetic problems. The universality of the reaction is finally highlighted by successful substitution of para-quinones by an ortho-quinone as the starting material.
RESUMO
The growing importance of submicrometer-structured surfaces across a variety of different fields has driven progress in light manipulation, color diversity, water-repellency, and functional enhancements. To enable mass production, processes like hot-embossing (HE), roll-to-roll replication (R2R), and injection molding (IM) are essential due to their precision and material flexibility. However, these processes are tool-based manufacturing (TBM) techniques requiring metal molds, which are time-consuming and expensive to manufacture, as they mostly rely on galvanoforming using templates made via precision microlithography or two-photon-polymerization (2PP). In this work, a novel approach is demonstrated to replicate amorphous metals from fused silica glass, derived from additive manufacturing and structured using hot embossing and casting, enabling the fabrication of metal insets with features in the range of 300 nm and a surface roughness of below 10 nm. By partially crystallizing the amorphous metal, during the replication process, the insets gain a high hardness of up to 800 HV. The metal molds are successfully used in polymer injection molding using different polymers including polystyrene (PS) and polyethylene (PE) as well as glass nanocomposites. This work is of significant importance to the field as it provides a production method for the increasing demand for sub-micron-structured tooling in the area of polymer replication while substantially reducing their cost of production.
RESUMO
Two-photon polymerization (2PP) is becoming increasingly established as additive manufacturing technology for microfabrication due to its high-resolution and the feasibility of generating complex parts. Until now, the high resolution of 2PP is also its bottleneck, as it limited throughput and therefore restricted the application to the production of microparts. Thus, mechanical properties of 2PP materials can only be characterized using nonstandardized specialized microtesting methods. Due to recent advances in 2PP technology, it is now possible to produce parts in the size of several millimeters to even centimeters, finally permitting the fabrication of macrosized testing specimens. Besides suitable hardware systems, 2PP materials exhibiting favorable mechanical properties that allow printing of up-scaled parts are strongly demanded. In this work, the up-scalability of three different photopolymers is investigated using a high-throughput 2PP system and low numerical aperture optics. Testing specimens in the cm-range are produced and tested with common or even standardized material testing methods available in conventionally equipped polymer testing labs. Examples of the characterization of mechanical, thermo-mechanical, and fracture properties of 2PP processed materials are shown. Additionally, aspects such as postprocessing and aging are investigated. This lays a foundation for future expansion of the 2PP technology to broader industrial application.
RESUMO
Photolabile groups are the key components of photo-responsive polymers, dynamically tunable materials with multiple applications in materials and life sciences. They usually consist of a chromophore and a labile bond and are inherently light sensitive. An exception are disulfides, simple reversible linkages, which become photocleavable upon addition of a photoinitiator. Despite their practical features, disulfides are rarely utilized due to their impractical formation. Here, we report a disulfide-based linker series bearing norbornene terminals for facile crosslinking of thiol-functionalized macromers via light-triggered thiol-ene conjugation (TEC). Besides finding a highly reactive lead compound, we also identify an unexpected TEC-retardation, strongly dependent on the molecular linker structure and affecting hydrogel stability. Finally, we present a useful method for localized disulfide cleavage by two-photon irradiation permitting micropatterning of disulfide-crosslinked networks.
RESUMO
A series of nine soluble, symmetric chalcogenophenes bearing hexyl-substituted triphenylamines, indolocarbazoles, or phenylcarbazoles was designed and synthesized as potential two-photon absorption (2PA) initiators. A detailed photophysical analysis of these molecules revealed good 2PA properties of the series and, in particular, a strong influence of selenium on the 2PA cross sections, rendering these materials especially promising new 2PA photoinitiators. Structuring and threshold tests proved the efficiency and broad spectral versatility of two selenium-containing lead compounds as well as their applicability in an acrylate resin formulation. A comparison with commercial photoinitiators Irg369 and BAPO as well as sensitizer ITX showed that the newly designed selenium-based materials TPA-S and TPA-BBS outperform these traditional initiators by far both in terms of reactivity and dose. Moreover, by increasing the ultralow concentration of TPA-BBS, a further reduction of the polymerization threshold can be achieved, revealing the great potential of this series for application in two-photon polymerization (2PP) systems where only low laser power is available.
RESUMO
Platinum (Pt) is an interesting material for many applications due to its high chemical resilience, outstanding catalytic activity, high electrical conductivity, and high melting point. However, microstructuring and especially 3D microstructuring of platinum is a complex process, based on expensive and specialized equipment often suffering from very slow processing speeds. In this work, organic-inorganic photoresins, which can be structured using direct optical lithography as well as two-photon lithography (TPL) with submicrometer resolution and high-throughput is presented. The printed structures are subsequently converted to high-purity platinum using thermal debinding of the binder and reduction of the salt. With this technique, complex 3D structures with a 3D resolution of 300 nm were fabricated. At a layer thickness of 35 nm, the patterns reach a high conductivity of 67% compared to bulk platinum. Microheaters, thermocouple sensors as well as a Lab-on-a-Chip system are presented as exemplary applications. This technology will enable a broad range of application from electronics, sensing and heating elements to 3D photonics and metamaterials.
RESUMO
The nature of the electronic excited state of many symmetric multibranched donor-acceptor molecules varies from delocalized/multipolar to localized/dipolar depending on the environment. Solvent-driven localization breaks the symmetry and traps the exciton in one branch. Using a combination of ultrafast spectroscopies, we investigate how such excited-state symmetry breaking affects the photochemical reactivity of quadrupolar and octupolar A-(π-D)2,3 molecules with photoisomerizable A-π-D branches. Excited-state symmetry breaking is identified by monitoring several spectroscopic signatures of the multipolar delocalized exciton, including the S2 â S1 electronic transition, whose energy reflects interbranch coupling. It occurs in all but nonpolar solvents. In polar media, it is rapidly followed by an alkyne-allene isomerization of the excited branch. In nonpolar solvents, slow and reversible isomerization corresponding to chemically-driven symmetry breaking, is observed. These findings reveal that the photoreactivity of large conjugated molecules can be tuned by controlling the localization of the excitation.
RESUMO
Most quadrupolar molecules designed for large two-photon absorption cross section have been shown to undergo symmetry breaking upon excitation to the S1 state. This was originally deduced from their strong fluorescence solvatochromism and later visualized in real time using transient infrared spectroscopy. For molecules not containing clear IR marker modes, however, a specific real-time observation of the symmetry breaking process remains lacking. Here we show that this process can be resolved using broadband fluorescence upconversion spectroscopy by monitoring the instantaneous emission transition dipole moment. This approach is illustrated with measurements performed on two quadrupolar molecules, with only one of them undergoing excited-state symmetry breaking in polar solvents.