RESUMO
Two-dimensional (2D) materials are promising candidates for spintronic applications. Maintaining their atomically smooth interfaces during integration of ferromagnetic (FM) electrodes is crucial since conventional metal deposition tends to induce defects at the interfaces. Meanwhile, the difficulties in picking up FM metals with strong adhesion and in achieving conductance match between FM electrodes and spin transport channels make it challenging to fabricate high-quality 2D spintronic devices using metal transfer techniques. Here, we report a solvent-free magnetic electrode transfer technique that employs a graphene layer to assist in the transfer of FM metals. It also serves as part of the FM electrode after transfer for optimizing spin injection, which enables the realization of spin valves with excellent performance based on various 2D materials. In addition to two-terminal devices, we demonstrate that the technique is applicable for four-terminal spin valves with nonlocal geometry. Our results provide a promising future of realizing 2D spintronic applications using the developed magnetic electrode transfer technique.
RESUMO
Ferroelectric transistors hold great potential in low consumption devices. Due to the high film quality and clean system, two dimensional organic semiconductors are widely employed to fabricate high performance organic electronic devices and explore the modulation mechanism of the molecular packing on device performance. Here, we combine the ferroelectric hafnium oxide HfZrOxand two-dimensional molecular crystal 2,9-didecyldinaphtho[2,3-b:2',3'-f]thieno[3,2b]thiophene (C10-DNTT) with controllable layers to study the molecular layer modulation of ferroelectric organic thin-film transistors (OTFTs). The contact resistance, driving current and transconductance are directly affected by the additional access resistance across the upper molecular layers at the source/drain contact region. Simultaneously, the capacitance of Schottky junction related to the molecular layer thickness could effectively adjust the gate potential acting on the organic channel, further controlling the devices' subthreshold swing and transconductance efficiency. This work would promote the development of low voltage and high performance OTFTs.
RESUMO
Negative transconductance (NTC) refers to the phenomenon of the N-shape transfer characteristic appearing with a current peak and valley. It has been extensively studied in the past few decades due to its applications in logic and memory devices. Here, we observe unique antibipolar transfer characteristics and NTC behavior in multi-layer 2,6-diphenyl anthracene organic thin-film transistors grown on h-BN, which is due to the vertical potential barrier between the charge accumulation region near the substrate and the neutral bulk region under the contacts. The applied extrinsic electric field could effectively modulate the barrier height, resulting in a competition for charge carrier transport between lateral and vertical directions. Based on the NTC and antibipolar properties, a frequency doubler has been fabricated on a single transistor, which provides a new building block for organic logic circuits.
RESUMO
Phase transition from the semiconducting hexagonal (2H) phase to the metallic monoclinic (1T') phase in two-dimensional (2D) transition metal dichalcogenides like MoTe2 is not only of great importance in fundamental study but also of technological significance for broad device applications. Here we report a universal, facile, scalable and reversible phase engineering technique (between 2H and 1T' phases) for both monolayer and few-layer MoTe2 based on a soft hydrogen plasma treatment. The 2H â 1T' transition was confirmed by a series of characterizations including Raman spectra and mapping studies, XPS analysis and FET device measurements at varying temperatures. We attribute the phase transition to the warping of Te-Mo bonds and the lateral sliding of the top Te-layer induced by the soft hydrogen ion bombardment according to both the structural and electronic characterizations as well as the horizontal comparison with the cases of Ar or O2 plasma treatment. We have also prepared a 2D heterostructure containing periodical 2H and 1T' MoTe2 and showed that such phase transition can be readily reversed by post annealing. These results thus provide a robust and efficient approach for the phase engineering of monolayer and few-layer MoTe2 and could aid the development of 2D optoelectronic, memory and reconfigurable devices.
RESUMO
Over the past 60 years, the semiconductor industry has been the core driver for the development of information technology, contributing to the birth of integrated circuits, Internet, artificial intelligence, and Internet of Things. Semiconductor technology has been evolving in structure and material with co-optimization of performance-power-area-cost until the state-of-the-art sub-5-nm node. Two-dimensional (2D) semiconductors are recognized by the industry and academia as a hopeful solution to break through the quantum confinement for the future technology nodes. In the recent 10 years, the key issues on 2D semiconductors regarding material, processing, and integration have been overcome in sequence, making 2D semiconductors already on the verge of application. In this paper, the evolution of transistors is reviewed by outlining the potential of 2D semiconductors as a technological option beyond the scaled metal oxide semiconductor field-effect transistors. We mainly focus on the optimization strategies of mobility (µ), equivalent oxide thickness (EOT), and contact resistance (RC ), which enables high ON current (Ion ) with reduced driving voltage (Vdd ). Finally, we prospect the semiconductor technology roadmap by summarizing the technological development of 2D semiconductors over the past decade.
RESUMO
Deformable catalytic material with excellent flexible structure is a new type of catalyst that has been applied in various chemical reactions, especially electrocatalytic hydrogen evolution reaction (HER). In recent years, deformable catalysts for HER have made great progress and would become a research hotspot. The catalytic activities of deformable catalysts could be adjustable by the strain engineering and surface reconfiguration. The surface curvature of flexible catalytic materials is closely related to the electrocatalytic HER properties. Here, firstly, we systematically summarized self-adaptive catalytic performance of deformable catalysts and various micro-nanostructures evolution in catalytic HER process. Secondly, a series of strategies to design highly active catalysts based on the mechanical flexibility of low-dimensional nanomaterials were summarized. Last but not least, we presented the challenges and prospects of the study of flexible and deformable micro-nanostructures of electrocatalysts, which would further deepen the understanding of catalytic mechanisms of deformable HER catalyst.
RESUMO
Understanding spinterfaces between magnetic metals and organic semiconductors is essential to unlock the great potentials that organic materials host for spintronic applications. Although plenty of efforts have been devoted to studying organic spintronic devices, exploring the role of metal/molecule spinterfaces at two-dimensional limit remains challenging because of excessive disorders and traps at the interfaces. Here, we demonstrate atomically smooth metal/molecule interfaces through nondestructively transferring magnetic electrodes on epitaxial grown single-crystalline layered organic films. Using such high-quality interfaces, we investigate spin injection of spin-valve devices based on organic films of different layers, in which molecules are packed in different manners. We find that the measured magnetoresistance and the estimated spin polarization increase markedly for bilayer devices compared with their monolayer counterparts. These observations reveal the key role of molecular packing on spin polarization, which is supported by density functional theory calculations. Our findings provide promising routes toward designing spinterfaces for organic spintronic devices.
RESUMO
Monolayer transition metal dichalcogenides (mTMDs) possess a direct band gap and strong PL emission that is highly sensitive to doping level and interfaces, laying the foundation for investigating the contact between mTMD and metal via PL spectroscopy. Currently, electrical methods have been utilized to measure the contact resistance (RC), but they are complicated, time-consuming, high-cost and suffer from inevitable chemical disorders and Fermi level pinning. In addition, previously reported contact resistances comprise both Schottky barrier and tunnel barrier components. Here, we report a simple, rapid and low-cost method to study the tunnel barrier dominated contact resistance of mTMD based junctions through PL spectroscopy. These junctions are free from chemical disorders and Fermi level pinning. Excluding the Schottky barrier component, solely tunnel barrier dominated contact resistances of 1 L MoSe2/Au and 1 L MoSe2/graphene junctions were estimated to be 147.8 Ω µm and 54.9 Ω µm, respectively. Density functional theory (DFT) simulations revealed that the larger RC of the former was possibly due to the existence of intrinsic effective potential difference (Φbarrier) between mTMD and metal. Both junctions exhibit an increasing tendency of RC as temperature decreases, which is probably attributed to the thermal expansion coefficient (TEC) mismatch-triggered interlayer spacing (d) increase and temperature-induced doping. Remarkably, a significant change of RC was observed in 1 L MoSe2/Au junctions, which is possibly ascribed to the changes of their orbital overlaps. Our results open new avenues for exploring fundamental metal-semiconductor contact principles and constructing high-performance devices.
RESUMO
The development of organic thin-film transistors (OTFTs) with low power consumption and high gain will advance many flexible electronics. Here, by combining solution-processed monolayer organic crystal, ferroelectric HfZrOx gating and van der Waals fabrication, we realize flexible OTFTs that simultaneously deliver high transconductance and sub-60 mV/dec switching, under one-volt operating voltage. The overall optimization of transconductance, subthreshold swing and output resistance leads to transistor intrinsic gain and amplifier voltage gain over 5.3 × 104 and 1.1 × 104, respectively, which outperform existing technologies using organics, oxides and low-dimensional nanomaterials. We further demonstrate battery-powered, integrated wearable electrocardiogram (ECG) and pulse sensors that can amplify human physiological signal by 900 times with high fidelity. The sensors are capable of detecting weak ECG waves (undetectable even by clinical equipment) and diagnosing arrhythmia and atrial fibrillation. Our sub-thermionic OTFT is promising for battery/wireless powered yet performance demanding applications such as electronic skins and radio-frequency identification tags, among many others.
RESUMO
Two-dimensional (2D) semiconductors, in particular transition metal dichalcogenides (TMDCs), have attracted great interest in extending Moore's law beyond silicon1-3. However, despite extensive efforts4-25, the growth of wafer-scale TMDC single crystals on scalable and industry-compatible substrates has not been well demonstrated. Here we demonstrate the epitaxial growth of 2 inch (~50 mm) monolayer molybdenum disulfide (MoS2) single crystals on a C-plane sapphire. We designed the miscut orientation towards the A axis (C/A) of sapphire, which is perpendicular to the standard substrates. Although the change of miscut orientation does not affect the epitaxial relationship, the resulting step edges break the degeneracy of nucleation energy for the antiparallel MoS2 domains and lead to more than a 99% unidirectional alignment. A set of microscopies, spectroscopies and electrical measurements consistently showed that the MoS2 is single crystalline and has an excellent wafer-scale uniformity. We fabricated field-effect transistors and obtained a mobility of 102.6 cm2 V-1 s-1 and a saturation current of 450 µA µm-1, which are among the highest for monolayer MoS2. A statistical analysis of 160 field-effect transistors over a centimetre scale showed a >94% device yield and a 15% variation in mobility. We further demonstrated the single-crystalline MoSe2 on C/A sapphire. Our method offers a general and scalable route to produce TMDC single crystals towards future electronics.