Nanopillar growth by focused helium ion-beam-induced deposition.

A 25 keV focused helium ion beam has been used to grow PtC nanopillars on a silicon substrate by beam-induced decomposition of a (CH(3))(3)Pt(C(P)CH(3)) precursor gas. The ion beam diameter was about 1 nm. The observed relatively high growth rates suggest that electronic excitation is the dominant mechanism in helium ion-beam-induced deposition. Pillars grown at low beam currents are narrow and have sharp tips. For a constant dose, the pillar height decreases with increasing current, pointing to depletion of precursor molecules at the beam impact site. Furthermore, the diameter increases rapidly and the total pillar volume decreases slowly with increasing current. Monte Carlo simulations have been performed with realistic values for the fundamental deposition processes. The simulation results are in good agreement with experimental observations. In particular, they reproduce the current dependences of the vertical and lateral growth rates and of the volumetric deposition efficiency. Furthermore, the simulations reveal that the vertical pillar growth is due to type-1 secondary electrons and primary ions, while the lateral outgrowth is due to type-2 secondary electrons and scattered ions.

Imaging and nanofabrication with the helium ion microscope of the Van Leeuwenhoek Laboratory in Delft.

Although helium ion microscopy (HIM) was introduced only a few years ago, many new application fields are emerging. The connecting factor between these novel applications is the unique interaction of the primary helium ion beam with the sample material at and just below its surface. In particular, the HIM secondary electron signal stems from an area that is extremely well localized around the point of incidence of the primary beam. This makes the HIM well suited for both high-resolution imaging and high-resolution nanofabrication. Another advantage in nanofabrication is the low ion backscattering fraction, which leads to a weak proximity effect. The subnanometer probe size and the unique beam-materials interactions have opened new areas of research. This review presents a selection of studies conducted on a single instrument. The selection encompasses applications ranging from imaging to nanofabrication and from fundamental academic research to applied industrial developments.