A review of metallurgical slags as catalysts in advanced oxidation processes for removal of refractory organic pollutants in wastewater.

With the rapid growth of the metallurgical industry, there is a significant increase in the production of metallurgical slags. The waste slags pose significant challenges for their disposal because of complex compositions, low utilization rates, and environmental toxicity. One promising approach is to utilize metallurgical slags as catalysts for treatment of refractory organic pollutants in wastewater through advanced oxidation processes (AOPs), achieving the objective of "treating waste with waste". This work provides a literature review of the source, production, and chemical composition of metallurgical slags, including steel slag, copper slag, electrolytic manganese residue, and red mud. It emphasizes the modification methods of metallurgical slags as catalysts and the application in AOPs for degradation of refractory organic pollutants. The reaction conditions, catalytic performance, and degradation mechanisms of organic pollutants using metallurgical slags are summarized. Studies have proved the feasibility of using metallurgical slags as catalysts for removing various pollutants by AOPs. The catalytic performance was significantly influenced by slags-derived catalysts, catalyst modification, and process factors. Future research should focus on addressing the safety and stability of catalysts, developing green and efficient modification methods, enhancing degradation efficiency, and implementing large-scale treatment of real wastewater. This work offers insights into the resource utilization of metallurgical slags and pollutant degradation in wastewater.

EI/IOT of PFCs: Environmental impacts/interactions, occurrences, and toxicities of perfluorochemicals.

Various studies have been conducted on the perfluorochemicals (PFCs) family over the years. These compounds have been sought in various industrial aspects involving the synthesis of everyday utilities due to their broad range of applications. As a result, PFCs have built up in the environment, causing concern. The presence of PFCs in various environmental media, such as terrestrial and marine settings, as well as the mechanisms of transport, bioaccumulation, and physio-chemical interactions of PFCs within plants, aquatic organisms, microplastics, and, ultimately, the human body, are discussed in this review, which draws on a variety of research publications. The interaction of PFCs with proteins, translocation, and adsorption by hydrophobic interactions were observed, and this had an impact on the natural functioning of biological processes, resulting in events such as phylogenic clustering, competitive inhibition, and many others, posing potential hazards to human health and other relevant organisms in the ecosystem. However, further research is needed to have a better knowledge of PFCs and their interactions so that low-cost treatments can be developed to eliminate them. It is therefore, future research should focus on the role of soil matrix as a defensive mechanism for PFCs, as well as the impact of PFC chain length rejection.

Prevalence of Endocrine Disrupting Chemicals in the urban wastewater treatment systems of Dehradun, India: Daunting presence of Estrone.

We quantified the occurrences and seasonal variations of the target endocrine disrupting chemicals (EDCs) at four (two major municipals, and two academic institutions) WWTPs in Dehradun city, Uttarakhand, India. The results showed estrone in higher concentrations at µgL-1 levels in influent among the WWTPs, compared to triclosan (TCS) at ngL-1 levels. An astounding concentration of 123.95 µgL-1 was recorded for the estrone in the influent, which is to date the highest ever recorded, globally. Statistical data treatment was performed to test the distribution of the data (Shapiro-Wilk, Anderson-Darling, Lilliefors, and Jarque-Bera tests), and the significant difference between the mean of the wastewater sample population (ANOVA: F statistics, p values, Mann-Whitney test, Tukey's and Dunn's post hoc analysis). Statistical data treatment indicated EDCs concentration with a bi-modal distribution. The Shapiro-Wilk, Anderson-Darling, Lilliefors, and Jarque-Bera tests elucidate a non-normal distribution for the EDCs sample data. A statistically significant difference (F = 8.46; p < 0.0001) in the seasonal data for the abundance of the target EDCs at the WWTPs have been observed. Highest and significantly different mean EDCs concentrations were recorded during the monsoon, compared to the spring (p = 0.025) and summer (p = 0.0004) seasons in the influent waters. The mean influent concentrations of TCS and estrone in monsoon were 66.45 ngL-1 and 78.02 µgL-1, respectively. Maximum removals were recorded for TCS, while maximum negative removal of ∼293% was observed for estrone in the WWTPs. Particularly, the high levels of estrone in the wastewater pose a significant threat as estrone presence could be led to feminization, dysregulation of reproduction in organisms, and carcinogenesis processes in the environment. This study critically highlights the limitation of the WWTPs in the treatment, degradation, and assimilation of EDCs leading to their hyperaccumulation at WWTP effluents, thereby posing a substantial threat to nearby aquatic ecosystems, human health, and the ecological balance of the region.

Acquired insights from the long-term surveillance of SARS-CoV-2 RNA for COVID-19 monitoring: The case of Monterrey Metropolitan Area (Mexico).

Wastewater-based epidemiology offers a time- and cost-effective way to monitor SARS-CoV-2 spread in communities and therefore represents a complement to clinical testing. WBE applicability has been demonstrated in a number of cases over short-term periods as a method for tracking the prevalence of SARS-CoV-2 and an early-warning tool for predicting outbreaks in the population. This study reports SARS-CoV-2 viral loads from wastewater treatment plants (WWTPs) and hospitals over a 6-month period (June to December 2020). Results show that the overall range of viral load in positive tested samples was between 1.2 × 103 and 3.5 × 106 gene copies/l, unveiling that secondary-treated wastewaters mirrored the viral load of influents. The interpretation suggests that the viral titers found in three out of four WWTPs were associated to clinical COVID-19 surveillance indicators preceding 2-7 days the rise of reported clinical cases. The median wastewater detection rate of SARS-CoV-2 was one out of 14,300 reported new cases. Preliminary model estimates of prevalence ranged from 0.02 to 4.6% for the studied period. This comprehensive statistical and epidemiological analysis demonstrates that the applied wastewater-based approach to COVID-19 surveillance is in general consistent and feasible, although there is room for improvements.

Lead time of early warning by wastewater surveillance for COVID-19: Geographical variations and impacting factors.

The global data on the temporal tracking of the COVID-19 through wastewater surveillance needs to be comparatively evaluated to generate a proper and precise understanding of the robustness, advantages, and sensitivity of the wastewater-based epidemiological (WBE) approach. We reviewed the current state of knowledge based on several scientific articles pertaining to temporal variations in COVID-19 cases captured via viral RNA predictions in wastewater. This paper primarily focuses on analyzing the WBE-based temporal variation reported globally to check if the reported early warning lead-time generated through environmental surveillance is pragmatic or latent. We have compiled the geographical variations reported as lead time in various WBE reports to strike a precise correlation between COVID-19 cases and genome copies detected through wastewater surveillance, with respect to the sampling dates, separately for WASH and non-WASH countries. We highlighted sampling methods, climatic and weather conditions that significantly affected the concentration of viral SARS-CoV-2 RNA detected in wastewater, and thus the lead time reported from the various climatic zones with diverse WASH situations were different. Our major findings are: i) WBE reports around the world are not comparable, especially in terms of gene copies detected, lag-time gained between monitored RNA peak and outbreak/peak of reported case, as well as per capita RNA concentrations; ii) Varying sanitation facility and climatic conditions that impact virus degradation rate are two major interfering features limiting the comparability of WBE results, and iii) WBE is better applicable to WASH countries having well-connected sewerage system.

Microplastics in Latin America and the Caribbean: A review on current status and perspectives.

A literature review was carried out to analyze the current status of microplastic research in Latin America and the Caribbean (LAC). Specifically, this work focused on publications pertaining to (1) occurrence and distribution of microplastics in the environment, including water, sediments, and soil and (2) the environmental impact of MPs, particularly their presence and effects on aquatic and terrestrial organisms. The review included peer-reviewed articles from Scopus, Science Direct, Web of Science, Google Scholar and two iberoamerican open access databases (Redalyc and SciELO). It was found that LAC has only contributed to 5% of the global scientific output on microplastics, and overall the highest contributor within the region was Brazil (52%), followed by Chile (16%) and Mexico (13%). An additional section analyzing the barriers to conducting microplastic research in LAC and their exacerbation by the current COVID-19 pandemic was included to provide additional context behind the relatively low scientific production and improve recommendations encouraging research in this region.

Global groundwater vulnerability for Pharmaceutical and Personal care products (PPCPs): The scenario of second decade of 21st century.

The global production of PPCPs have increased by multiple folds promoting excessive exposure of its metabolites to humans via different aquatic systems. The higher residence time of toxic precursors of these metabolites pose direct human health risk. Among the different aquatic systems, the contamination of groundwater by PPCPs is the most concerning threat. This threat is especially critical considering the lesser oxidizing potential of the groundwater as compared to freshwater/river water. A major challenge also arises due to excessive dependency of the world's population on groundwater, which is exponentially increasing with time. This makes the identification and characterization of spatial contamination hotspots highly probabilistic as compared to other freshwater systems. The situation is more vulnerable in developing countries where there is a reported inadequacy of wastewater treatment facilities, thereby forcing the groundwater to behave as the only available sequestrating sink for all these contaminants. With increased consumption of antibiotics and other pharmaceuticals compounds, these wastes have proven capability in terms of enhancing the resistance among the biotic community of the soil systems, which ultimately can become catastrophic and carcinogenic in near future. Recent studies are supporting the aforementioned concern where compounds like diclofenac (analgesic) have attained a concentration of 1.3 mgL-1 in the aquifer systems of Delhi, India. The situation is far worse for developed nations where prolonged and indiscriminate usage of antidepressants and antibiotics have life threating consequences. It has been confirmed that certain compounds like ofloxacin (antibiotics) and bis-(2-ethylhexyl)phthalate are present in some of the most sensitive wells/springs of the United States and Mexico. The current trend of the situation has been demonstrated by integrating a comparative approach of the published literatures in last three years. This review provides first-hand information report for formulating a directive policy framework for tackling PPCPs issues in the groundwater system.

Understanding the processes in a historically relevant thermal and mineral spring water by using mixing and inverse geochemical models.

The thermal mineral water of Peñón de los Baños spa (Mexico City) has been used for over 500 years starting in pre-Hispanic times and is famous for the treatment of various pathologies. It has a temperature of 45 °C, which is rich in HCO3-, and its main trace elements are B, Li and Fe, which confers healing effects. Concerns about the sustainability of this important spa have motivated this study to understand the thermal system, possible hydraulic and hydrochemical changes over time and its implications. Stable water isotope data indicate that the thermal water sources originate from local precipitation at Sierra de las Cruces with a recharge elevation of approximately 2770 m above sea level. The recharged water percolates through volcanic and carbonate rock formations and ascends via fault structure conduits, where it eventually is extracted 25 km downstream in Peñon de los Baños. During the gravity-driven deep circulation of up to 4.9 km, the groundwater is heated up to 136-160 °C. A comparison of past and current water levels and water chemical analyses indicates a water table drop and few variations in the chemical composition, confirming the presence of anthropic impact on water quality. Due to the heavy groundwater extractions in Mexico City, the spring water flow has ceased, and water must be pumped now from a 203-m deep well. In addition, the concentration of bicarbonate, sodium and chloride has been reduced by half since the onset of groundwater development. The therapeutic effects of this thermal mineral water are at risk due to the alteration of the chemical signature. However, new and different therapeutical uses may prevent a future deterioration or closure of this historically important thermal spa. It is crucial to establish a monitoring program of the thermal mineral water and reducing or minimizing nearby urban extractions which tap the regional flow component to preserve the properties of the thermal water.

Heavy Metal Enrichment Factors in Fluvial Sediments of an Amazonian Basin Impacted by Gold Mining.

Artisanal and small-scale gold mining (ASGM) has been performed in the southern Ecuadorian Amazon since the colonial period. However, its effects on fluvial systems have been poorly investigated. Thus, in order to calculate the normalized enrichment factors (NEF) of several heavy metals in fluvial sediments of the Zamora River basin (Ecuadorian Amazon), we analyzed bottom sediments along ASGM-affected and unaffected river sections. The results indicated that sediments of the Congüime River have NEF between 2.2 and 2.3 for Cu (moderate contamination) and higher than 3 for Mn, Zn, Pb, and Hg (severe contamination). Similarly, a severe contamination is also observed in the lower Nangaritza River, due to sediments of this sector have NEF > 3 for Zn, Pb, and Hg. Bottom sediments from the Nambija and Zamora rivers showed a severe contamination with Hg (NEF > 3), suggesting the existence of ASGM activities in the upper Zamora River basin.

Assessment of major ions and trace elements in groundwater supplied to the Monterrey metropolitan area, Nuevo León, Mexico.

The Monterrey metropolitan area (MMA) is the third greatest urban area and the second largest economic city of Mexico. More than four million people living in this megacity use groundwater for drinking, industrial and household purposes. Thus, major ion and trace element content were assessed in order to investigate the main hydrochemical properties of groundwater and determine if groundwater of the area poses a threat to the MMA population. Hierarchical cluster analysis using all the groundwater chemical data showed five groups of water. The first two groups were classified as recharge waters (Ca-HCO3) coming from the foothills of mountain belts. The third group was also of Ca-HCO3 water type flowing through lutites and limestones. Transition zone waters of group four (Ca-HCO3-SO4) flow through the valley of Monterrey, whereas discharge waters of group 5 (Ca-SO4) were found toward the north and northeast of the MMA. Principal component analysis performed in groundwater data indicates four principal components (PCs). PC1 included major ions Si, Co, Se, and Zn, suggesting that these are derived by rock weathering. Other trace elements such as As, Mo, Mn, and U are coupled in PC2 because they show redox-sensitive properties. PC3 indicates that Pb and Cu could be the less mobile elements in groundwater. Although groundwater supplied to MMA showed a high-quality, high mineralized waters of group 5 have NO3- concentrations higher than the maximum value proposed by international guidelines and SO42-, NO3-, and total dissolved solid concentrations higher than the maximum levels allowed by the Mexican normative.

FlowSOM clustering - A novel pattern recognition approach for water research: Application to a hyper-arid coastal aquifer system.

Monitoring and understanding of water resources have become essential in designing effective and sustainable management strategies to overcome the growing water quality challenges. In this context, the utilization of unsupervised learning techniques for evaluating environmental tracers has facilitated the exploration of sources and dynamics of groundwater systems through pattern recognition. However, conventional techniques may overlook spatial and temporal non-linearities present in water research data. This paper introduces the adaptation of FlowSOM, a pioneering approach that combines self-organizing maps (SOM) and minimal spanning trees (MST), with the fast-greedy network clustering algorithm to unravel intricate relationships within multivariate water quality datasets. By capturing connections within the data, this ensemble tool enhances clustering and pattern recognition. Applied to the complex water quality context of the hyper-arid transboundary Caplina/Concordia coastal aquifer system (Peru/Chile), the FlowSOM network and clustering yielded compelling results in pattern recognition of the aquifer salinization. Analyzing 143 groundwater samples across eight variables, including major ions, the approach supports the identification of distinct clusters and connections between them. Three primary sources of salinization were identified: river percolation, slow lateral aquitard recharge, and seawater intrusion. The analysis demonstrated the superiority of FlowSOM clustering over traditional techniques in the case study, producing clusters that align more closely with the actual hydrogeochemical pattern. The outcomes broaden the utilization of multivariate analysis in water research, presenting a comprehensive approach to support the understanding of groundwater systems.

The effects of heavy rain on the fate of urban and agricultural pollutants in the riverside area around weirs using multi-isotope, microbial data and numerical simulation.

The increase in extreme heavy rain due to climate change is a critical factor in the fate of urban and agricultural pollutants in aquatic system. Nutrients, including NO3- and PO43-, are transported with surface and seepage waters into rivers, lakes and aquifers and can eventually lead to algal blooms. δ15N-NO3-, δ18O-NO3-, and δ11B combined with hydrogeochemical and microbial data for groundwater and surface water samples were interpreted to evaluate the fate of nutrients in a riverside area around weirs in Daegu, South Korea. Most of the ions showed similar concentrations in the groundwater samples before and after heavy rain while concentrations of major ions in surface water samples were diluted after heavy rain. However, Si, PO43-, Zn, Ce, La, Pb, Cu and a number of waterborne pathogens increased in surface water after heavy rain. The interpretation of δ11B, δ15N-NO3-, and δ18O-NO3- values using a Bayesian mixing model revealed that sewage and synthetic fertilizers were the main sources of contaminants in the groundwater and surface water samples. δ18O and SiO2 interpreted using the Bayesian mixing model indicated that the groundwater component in the surface water increased from 4.4 % to 17.9 % during the wet season. This is consistent with numerical simulation results indicating that the direct surface runoff and the groundwater baseflow contributions to the river system had also increased 6.4 times during the wet season. The increase in proteobacteria and decrease of actinobacteria in the surface water samples after heavy rain were also consistent with an increase of surface runoff and an increased groundwater component in the surface water. This study suggests that source apportionment based on chemical and multi-isotope data combined with numerical modeling approaches can be useful for identifying main hydrological and geochemical processes in riverside areas around weirs and can inform suggestions of effective methods for water quality management.

Arsenic and fluoride in groundwater triggering a high risk: Probabilistic results using Monte Carlo simulation and species sensitivity distribution.

The widespread presence of arsenic (As) and fluoride (F-) in groundwater poses substantial risks to human health on a global scale. These elements have been identified as the most prevalent geogenic contaminants in groundwater in northern Mexico. Consequently, this study aimed to evaluate the human health and ecological risks associated with the content of As and F- in the Meoqui-Delicias aquifer, which is in one of Mexico's most emblematic irrigation districts. Concentrations of As and F- were measured in 38 groundwater samples using ICP-MS and ion chromatography, respectively. Overall, these elements showed a similar trend across the aquifer, revealing a positive correlation between them and pH. The concentration of As and F- in the groundwater ranged from 5.3 µg/L to 303 µg/L and from 0.5 mg/L to 8.8 mg/L, respectively. Additionally, the levels of As and F- surpassed the established national standards for safe drinking water in 92% and 97% of samples, respectively. Given that groundwater is used for both agricultural purposes and human activities, this study also assessed the associated human health and ecological risks posed by these elements using Monte Carlo simulation and Species Sensitivity Distribution. The findings disclosed a significant noncarcinogenic health risk associated with exposure to As and F-, as well as an unacceptable carcinogenic health risk to As through water consumption for both adults and children. Furthermore, a high ecological risk to aquatic species was identified for F- and high to medium risks for As in the sampling sites. Therefore, the findings in this study provide valuable information for Mexican authorities and international organizations (e.g., WHO) about the adverse effects that any exposure without treatment to groundwater from this region represents for human health.

Compounding one problem with another? A look at biodegradable microplastics.

Environmental concerns about microplastics (MPs) have motivated research of their sources, occurrence, and fate in aquatic and soil ecosystems. To mitigate the environmental impact of MPs, biodegradable plastics are designed to naturally decompose, thus reducing the amount of environmental plastic contamination. However, the environmental fate of biodegradable plastics and the products of their incomplete biodegradation, especially micro-biodegradable plastics (MBPs), remains largely unexplored. This comprehensive review aims to assess the risks of unintended consequences associated with the introduction of biodegradable plastics into the environment, namely, whether the incomplete mineralization of biodegradable plastics could enhance the risk of MBPs formation and thus, exacerbate the problem of their environmental dispersion, representing a potentially additional environmental hazard due to their presumed ecotoxicity. Initial evidence points towards the potential for incomplete mineralization of biodegradable plastics under both controlled and uncontrolled conditions. Rapid degradation of PLA in thermophilic industrial composting contrasts with the degradation below 50 % of other biodegradables, suggesting MBPs released into the environment through compost. Moreover, degradation rates of <60 % in anaerobic digestion for polymers other than PLA and PHAs suggest a heightened risk of MBPs in digestate, risking their spread into soil and water. This could increase MBPs and adsorbed pollutants' mobilization. The exact behavior and impacts of additive leachates from faster-degrading plastics remain largely unknown. Thus, assessing the environmental fate and impacts of MBPs-laden by-products like compost or digestate is crucial. Moreover, the ecotoxicological consequences of shifting from conventional plastics to biodegradable ones are highly uncertain, as there is insufficient evidence to claim that MBPs have a milder effect on ecosystem health. Indeed, literature shows that the impact may be worse depending on the exposed species, polymer type, and the ecosystem complexity.

Tricks and tracks of prevalence, occurrences, treatment technologies, and challenges of mixtures of emerging contaminants in the environment: With special emphasis on microplastic.

This paper aims to emphasize the occurrence of various emerging contaminant (EC) mixtures in natural ecosystems and highlights the primary concern arising from the unregulated release into soil and water, along with their impacts on human health. Emerging contaminant mixtures, including pharmaceuticals, personal care products, dioxins, polychlorinated biphenyls, pesticides, antibiotics, biocides, surfactants, phthalates, enteric viruses, and microplastics (MPs), are considered toxic contaminants with grave implications. MPs play a crucial role in transporting pollutants to aquatic and terrestrial ecosystems as they interact with the various components of the soil and water environments. This review summarizes that major emerging contaminants (ECs), like trimethoprim, diclofenac, sulfamethoxazole, and 17α-Ethinylestradiol, pose serious threats to public health and contribute to antimicrobial resistance. In addressing human health concerns and remediation techniques, this review critically evaluates conventional methods for removing ECs from complex matrices. The diverse physiochemical properties of surrounding environments facilitate the partitioning of ECs into sediments and other organic phases, resulting in carcinogenic, teratogenic, and estrogenic effects through active catalytic interactions and mechanisms mediated by aryl hydrocarbon receptors. The proactive toxicity of ECs mixture complexation and, in part, the yet-to-be-identified environmental mixtures of ECs represent a blind spot in current literature, necessitating conceptual frameworks for assessing the toxicity and risks with individual components and mixtures. Lastly, this review concludes with an in-depth exploration of future scopes, knowledge gaps, and challenges, emphasizing the need for a concerted effort in managing ECs and other organic pollutants.

A metagenomic study of antibiotic resistance genes in a hypereutrophic subtropical lake contaminated by anthropogenic sources.

Antibiotic resistance genes (ARGs) are a major threat to human and environmental health. This study investigated the occurrence and distribution of ARGs in Lake Cajititlán, a hypereutrophic subtropical lake in Mexico contaminated by anthropogenic sources (urban wastewater and runoff from crop and livestock production). ARGs (a total of 475 genes) were detected in 22 bacterial genera, with Pseudomonas (144 genes), Stenotrophomonas (88 genes), Mycobacterium (54 genes), and Rhodococcus (27 genes) displaying the highest frequencies of ARGs. Among these, Pseudomonas aeruginosa and Stenotrophomonas maltophilia showed the highest number of ARGs. The results revealed a diverse array of ARGs, including resistance to macrolides (11.55 %), aminoglycosides (8.22 %), glycopeptides (6.22 %), tetracyclines (4 %), sulfonamides (4 %), carbapenems (1.11 %), phenicols (0.88 %), fluoroquinolones (0.44 %), and lincosamides (0.22 %). The most frequently observed ARGs were associated with multidrug resistance (63.33 %), with MexF (42 genes), MexW (36 genes), smeD (31 genes), mtrA (25 genes), and KHM-1 (22 genes) being the most common. Lake Cajititlán is a recreational area for swimming, fishing, and boating, while also supporting irrigation for agriculture and potentially acting as a drinking water source for some communities. This raises concerns about the potential for exposure to antibiotic-resistant bacteria through these activities. The presence of ARGs in Lake Cajititlán poses a significant threat to both human and environmental health. Developing strategies to mitigate the risks of antibiotic resistance, including improving wastewater treatment, and promoting strategic antibiotic use and disposal, is crucial. This study represents a significant advancement in the understanding of antibiotic resistance dynamics in a hypereutrophic subtropical lake in a developing country, providing valuable insights for the scientific community and policymakers.

Aggregation behaviour of black carbon in aquatic solution: Effect of ionic strength and coexisting metals.

Black Carbon (BC) is an important constituent of both aquatic and terrestrial environment, but also has several adverse effects on human health, aquatic life, and contributes to the global climate change. Thus, to understand the fate and transport of BC nanoparticles (NPs) in the environment, it's important to understand the colloidal stability or aggregation behaviour and factors affecting it, under various environmental conditions, including both aquatic and atmospheric. This study investigated the individual influence of ionic strengths, valence (Na+, Ca2+ and Mg2+), metals (Zn2+, Cu2+, Ni2+ and Cd2+), and organic substances (PO43- and Humic Acid: HA) on the effective diameter or hydrodynamic diameter and zeta potential of BC-NPs in aquatic systems. A dynamic light scattering (DLS) principle-based 90 Plus Particle Size Analyzer was used for measurements of BC particle size and zeta potential at varying ionic chemistry. The results showed that strong ionic strength promotes aggregation of BC-NPs till the repulsion forces become dominant due to more negative zeta potential. The Aggregation of BC-NPs was observed to be significantly dependent on the ionic valence, where divalent ions caused more aggregation than monovalent ions. Metal ions at higher concentration (around 1 mM) promoted the aggregation rate of BC-NPs, and Cu+2 dominated among all selected metals. Conversely, organic matter (PO43- and HA) tends to promote stabilisation of BC-NPs instead of aggregation. Though this study investigated individual effect of substances, influence of possible environmental combination of substances will help to get more clear idea.

Worldwide risk assessment of phthalates and bisphenol A in humans: The need for updating guidelines.

Phthalates and bisphenol A (BPA) are compounds widely used as raw materials in the production of plastics, making them ubiquitous in our daily lives. This results in widespread human exposure and human health hazards. Although efforts have been conducted to evaluate the risk of these compounds in diverse regions around the world, data scattering may mask important trends that could be useful for updating current guidelines and regulations. This study offers a comprehensive global assessment of human exposure levels to these chemicals, considering dietary and nondietary ingestion, and evaluates the associated risk. Overall, the exposure daily intake (EDI) values of phthalates and BPA reported worldwide ranged from 1.11 × 10-7 to 3 700 µg kg bw-1 d-1 and from 3.00 × 10-5 to 6.56 µg kg bw-1 d-1, respectively. Nevertheless, the dose-additive effect of phthalates has been shown to increase the EDI up to 5 100 µg kg bw-1 d-1, representing a high risk in terms of noncarcinogenic (HQ) and carcinogenic (CR) effects. The worldwide HQ values of phthalates and BPA ranged from 2.25 × 10-7 to 3.66 and from 2.74 × 10-7 to 9.72 × 10-2, respectively. Meanwhile, a significant number of studies exhibit high CR values for benzyl butyl phthalate (BBP) and di(2-ethylhexyl) phthalate (DEHP). Moreover, DEHP has shown the highest maximum mean CR values for humans in numerous studies, up to 179-fold higher than BBP. Despite mounting evidence of the harmful effects of these chemicals at low-dose exposure on animals and humans, most regulations have not been updated. Thus, this article emphasizes the need for updating guidelines and public policies considering compelling evidence for the adverse effects of low-dose exposure, and it cautions against the use of alternative plasticizers as substitutes for phthalates and BPA because of the significant gaps in their safety.

Seawater intrusion pattern recognition supported by unsupervised learning: A systematic review and application.

Seawater intrusion is among the world's leading causes of groundwater contamination, as salty water can affect potable water access, food production, and ecosystem functions. To explore such contamination sources, multivariate analysis supported by unsupervised learning tools has been used for decades to aid in water resource pattern recognition, clustering, and water quality data variability characterization. This study proposes a systematic review of these techniques applied for supporting seawater intrusion identification based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement and subsequent bibliometric analysis of 102 coastal hydrogeological studies. The most relevant identified methods, including principal components analysis (PCA), hierarchical clustering analysis, K-means clustering, and self-organizing maps, are explained and applied to a case study. Although 74 % of the studies that applied dimensional reduction methods, such as PCA, associated most of the database variance with the salinization process, 77 % of the studies that applied clustering methods associated at least one water sample cluster with the influence of seawater intrusion. Based on the review and a practical demonstration using the open-source R software platform, recommendations are made regarding data preprocessing, research opportunities, and publishing information necessary to replicate and validate the studies.

Optical Biosensors and Their Applications for the Detection of Water Pollutants.

The correct detection and quantification of pollutants in water is key to regulating their presence in the environment. Biosensors offer several advantages, such as minimal sample preparation, short measurement times, high specificity and sensibility and low detection limits. The purpose of this review is to explore the different types of optical biosensors, focusing on their biological elements and their principle of operation, as well as recent applications in the detection of pollutants in water. According to our literature review, 33% of the publications used fluorescence-based biosensors, followed by surface plasmon resonance (SPR) with 28%. So far, SPR biosensors have achieved the best results in terms of detection limits. Although less common (22%), interferometers and resonators (4%) are also highly promising due to the low detection limits that can be reached using these techniques. In terms of biological recognition elements, 43% of the published works focused on antibodies due to their high affinity and stability, although they could be replaced with molecularly imprinted polymers. This review offers a unique compilation of the most recent work in the specific area of optical biosensing for water monitoring, focusing on both the biological element and the transducer used, as well as the type of target contaminant. Recent technological advances are discussed.