Role of Working Temperature and Humidity in Acetone Detection by SnO2 Covered ZnO Nanowire Network Based Sensors.

A randomly oriented nanowire network, also called nanonet (NN), is a nano-microstructure that is easily integrated into devices while retaining the advantages of using nanowires. This combination presents a highly developed surface, which is promising for sensing applications while drastically reducing integration costs compared to single nanowire integration. It now remains to demonstrate its effective sensing in real conditions, its selectivity and its real advantages. With this work, we studied the feasibility of gaseous acetone detection in breath by considering the effect of external parameters, such as humidity and temperature, on the device's sensitivity. Here the devices were made of ZnO NNs covered by SnO2 and integrated on top of microhotplates for the fine and quick control of sensing temperature with low energy consumption. The prime result is that, after a maturation period of about 15 h, the devices are sensitive to acetone concentration as low as 2 ppm of acetone at 370 °C in an alternating dry and wet (50% of relative humidity) atmosphere, even after 90 h of experiments. While still away from breath humidity conditions, which is around 90% RH, the sensor response observed at 50% RH to 2 ppm of acetone shows promising results, especially since a temperature scan allows for ethanol's distinguishment.

All-Solution-Processed Organic Light-Emitting Diodes Based on Photostable Photo-cross-linkable Fluorescent Small Molecules.

We demonstrate herein the fabrication of small molecule-based OLEDs where four organic layers from the hole- to the electron-transporting layers have successively been deposited by using an all-solution process. The key feature of the device relies on a novel photopolymerizable red-emitting material, made of small fluorophores substituted with two acrylate units, and displaying high-quality film-forming properties as well as high emission quantum yield as nondoped thin films. Insoluble emissive layers were obtained upon UV irradiation using low illumination doses, with no further need of postcuring. Very low photodegradation was noticed, giving rise to bright layers with a remarkable surface quality, characterized by a mean RMS roughness as low as 0.7 nm after development. Comparative experiments between solution-processed OLEDs and vacuum-processed OLEDs made of fluorophores with close architectures show external quantum efficiencies in the same range while displaying distinct behaviors in terms of current and power efficiencies. They validate the proof of concept of nondoped solution-processable emissive layers exclusively made of photopolymerized fluorophores, thereby reducing the amount of components and opening the way toward cost-effective fabrication of solution-processed OLED multilayer architectures.