RESUMO
The Accelerated Approval (AA) Program of the United States (US) Food and Drug Administration (FDA) was established to facilitate and expedite access to new drugs for serious or life-threatening conditions. Although many drugs have granted AAs in the US, the number of approvals under the conditional approval system in Japan remains limited. This study aimed to examine whether confirmatory trials after the US AA are conducted in accordance with the design of postmarketing requirements and assess the timing of regular approval (RA) in Japan for drugs that have been granted US AA. Utilizing FDA databases and Japanese regulatory data from 1992 to 2023, we analyzed indications, postmarketing requirements, and clinical trial designs. Our findings indicate that the AA program in the US is well-managed as most AAs were converted to RAs based on confirmatory study data that met the designations. From the Japanese perspective, our findings show that the over half of Japanese RAs can be obtained without waiting for confirmatory trial results. By granting RA, instead of conditional approval, based on exploratory trial data in the US AA, the opportunity to evaluate postmarketing confirmatory trial results might be lost in Japan. Therefore, further improvements are needed to actively utilize the conditional approval system, which could allow for the rapid introduction of innovative drugs and also the verification of their efficacy and safety at an appropriate time.
Assuntos
Ensaios Clínicos como Assunto , Aprovação de Drogas , United States Food and Drug Administration , Estados Unidos , Japão , Humanos , Vigilância de Produtos ComercializadosRESUMO
Carbohydrates are key building blocks for advanced functional materials owing to their biological functions and unique material properties. Here, we propose a star-shaped discrete block co-oligomer (BCO) platform to access carbohydrate nanostructures in bulk and thin-film states via the microphase separation of immiscible carbohydrate and hydrophobic blocks (maltooligosaccharides with 1-4 glucose units and solanesol, respectively). BCOs with various star-shaped architectures and saccharide volume fractions were synthesized using a modular approach. In the bulk, the BCOs self-assembled into common lamellar, cylindrical, and spherical carbohydrate microdomains as well as double gyroid, hexagonally perforated lamellar, and Fddd network morphologies with domain spacings of â¼7 nm. In thin films, long-range-ordered periodic carbohydrate microdomains were fabricated via spin coating. Such controlled spatial arrangements of functional carbohydrate moieties on the nanoscale have great application potential in biomedical and nanofabrication fields.
Assuntos
Nanoestruturas , Carboidratos , Nanoestruturas/químicaRESUMO
Co-Ni alloy nanoparticles, a potential candidate for microwave absorption material, were successfully synthesized by tuning the reduction timing of Co and Ni ions by introducing oleylamine as a complexing agent and 1-heptanol as a reducing solvent. The formation mechanism elucidated using time-resolved sampling and in situ X-ray absorption spectroscopy (XAS) and ultraviolet-visible (UV-vis) spectrophotometry measurements suggested that the delay in the reduction of Co ions via complexation with oleylamine facilitated the co-reduction of Co with Ni ions and led to the formation of Co-Ni alloys. The successful synthesis of Co-Ni alloys experimentally confirmed the differences in magnetic properties between alloy and core-shell structured Co50Ni50 particles. Further, the syntheses of Co-Ni alloys with different compositions were also possible using the above technique. In addition, the microwave absorption properties were measured using the free-space method utilizing a vector network analyzer of Co50Ni50âpolyethylene composite with different sheet thicknesses. A reflection loss (RL) value of -25.7 dB at 13.6 GHz for the alloy structure was more significant than the core-shell counterpart. The above values are high compared to results reported in the past. The validity of the measurements was confirmed by utilizing the parameter retrieval method to extract permittivity and permeability from the scattering parameter (S) and recalculation of the RL as a function of frequency.
RESUMO
We conducted an in situ study on CFRP fracturing process using atomic-force-microscopy-based stress-sensitive indentation. Tensile stress distribution during fracture initiation and propagation was directly observed quantitatively. It led to a discovery that previously believed catastrophic fracture of individual carbon fiber develops in a controllable manner in the polymer matrix, exhibiting 10 times increase of fracture toughness. Plastic deformation in crack-bridging polymer matrix was accounted for the toughening mechanism. The model was applied to explain low temperature strength weakening of CFRP bulk material when matrix plasticity was intentionally 'shut down' by cryogenic cooling.
RESUMO
The relations between the mechanical properties, heat treatment, and compositions of elements in aluminum alloys are extracted by a materials informatics technique. In our strategy, a machine learning model is first trained by a prepared database to predict the properties of materials. The dependence of the predicted properties on explanatory variables, that is, the type of heat treatment and element composition, is searched using a Markov chain Monte Carlo method. From the dependencies, a factor to obtain the desired properties is investigated. Using targets of 5000, 6000, and 7000 series aluminum alloys, we extracted relations that are difficult to find via simple correlation analysis. Our method is also used to design an experimental plan to optimize the materials properties while promoting the understanding of target materials.
RESUMO
Elastic modulus measured through atomic force microscopy (AFM)-based indentation on single carbon fiber (CF) is found with dependence on lateral applied stress. An in situ indentation experiment inside a high-resolution transmission electron microscope was performed to quantitatively understand this phenomenon by observing microstructure change in the indented area. Change of graphitic basal plane misalignment angle during indentation was linked to a continuous change of modulus with the help of finite element simulation. The established relationship between modulus and indentation force was further used to calculate residual stress distribution in CF imbedded in a CF reinforced polymer composite using the AFM indentation technique. The stress-induced formation of nanoscale defects in the CF and their transformation into fracture were directly characterized.
RESUMO
The increasing global drug shortage poses a substantial challenge to national healthcare systems and affects access to essential therapies. In Japan, this problem is exacerbated by a large-scale government campaign to switch from brand-name products to generic drugs and manufacturing/marketing authorization holders with poor development and manufacturing controls. Regulatory bodies, such as the U.S. Food and Drug Administration and the European Medicines Agency have developed guidelines aimed at ensuring continuous drug supply and mitigating manufacturing risks. However, Japan's efforts have primarily relied on voluntary industry guidelines, lacking the robust regulatory frameworks of other developed nations. Therefore, this study proposes a draft guideline for Japan's pharmaceutical industry to manage drug shortages effectively. The Japanese government needs to establish a framework system that will enable pharmaceutical companies to effectively maintain a stable supply based on the proposals developed in this study.
RESUMO
Incomplete removal of early-stage gastrointestinal cancers by endoscopic treatments often leads to recurrence induced by residual cancer cells. To completely remove or kill cancer tissues and cells and prevent recurrence, chemotherapy, radiotherapy, and hyperthermia using biomaterials with drugs or nanomaterials are usually administered following endoscopic treatments. However, there are few biomaterials that can be applied using endoscopic devices to locally kill cancer tissues and cells. We previously reported that decyl group-modified Alaska pollock gelatin-based microparticles (denoted C10MPs) can adhere to gastrointestinal tissues under wet conditions through the formation of a colloidal gel driven by hydrophobic interactions. In this study, we combined C10MPs with superparamagnetic iron oxide nanoparticles (SPIONs) to develop a sprayable heat-generating nanomaterial (denoted SP/C10MP) for local hyperthermia of gastrointestinal cancers. The rheological property, tissue adhesion strength, burst strength, and underwater stability of SP/C10MP were improved through decyl group modification and SPION addition. Moreover, SP/C10MP that adhered to gastrointestinal tissues formed a colloidal gel, which locally generated heat in response to an alternating magnetic field. SP/C10MP successfully killed cancer tissues and cells in colon cancer-bearing mouse models in vitro and in vivo. Therefore, SP/C10MP has the potential to locally kill residual cancer tissues and cells after endoscopic treatments.
Assuntos
Neoplasias Gastrointestinais , Hipertermia Induzida , Nanopartículas de Magnetita , Adesivos Teciduais , Camundongos , Animais , Adesivos Teciduais/química , Nanopartículas de Magnetita/uso terapêutico , Nanopartículas de Magnetita/química , Neoplasia Residual , Materiais Biocompatíveis , Neoplasias Gastrointestinais/terapiaRESUMO
Magnetic components are key parts of energy conversion systems, such as electric generators, motors, power electric devices, and magnetic refrigerators. Toroidal inductors with magnetic ring cores can be found inside such electric devices that are used daily. For such inductors, magnetization vector M is believed to circulate with/without distribution inside magnetic cores as electric power was used in the late nineteenth century. Nevertheless, notably, the distribution of M has never been directly verified. Herein, we measured a map of polarized neutron transmission spectra for a ferrite ring core assembled on a familiar inductor device. The results showed that M circulates inside the ring core with a ferrimagnetic spin order when power is supplied to the coil. In other words, this method enables the multiscale operando imaging of magnetic states, allowing us to evaluate the novel architectures of high-performance energy conversion systems using magnetic components with complex magnetic states.
RESUMO
AIM: National health care expenditures have been increasing each year, although the Japanese government has annually revised official drug prices. Managing the health care system to pay for expensive drugs is a major concern. The reimbursement restriction, which is the only way that a drug can be implemented before market entry in Japan, is crucial for managing expenditures. Therefore, this study identifies the impact of the reimbursement restriction on drug market sales in Japan, particularly in the situation where health technology assessment or other market access regulations are not applicable before market entry. METHOD: All new drugs listed in fiscal years 2011-2019, along with their market size forecast, were identified using the materials from the Central Social Insurance Medical Council. We then calculated the percentage rate of reimbursement amounts based on the National Database of Health Insurance Claims relative to the predicted market size as a dependent variable. Using the reimbursement restriction for each drug as an independent variable, we performed descriptive and univariate analyses on each variable, followed by generalized linear mixed-effects model regression analysis. RESULTS: We identified 211 drugs. The mean rates of drugs that required physicians, facilities, and patients to meet criteria for use were 30.85% (n = 2), 31.42% (n = 2), and 72.11% (n = 6), respectively. The mean rate of drugs that required diagnostic testing was 22.99% (n = 7), which was 3.7 times lower than the rate of drugs that did not require such testing (p < .05). CONCLUSION: Our results indicate that the reimbursement restriction requiring diagnostic testing has a substantial impact on decreasing market sales. As the number of cases for each requirement is small, further study is needed to measure the impact of the other reimbursement restrictions.
Assuntos
Custos de Medicamentos , Preparações Farmacêuticas , Gastos em Saúde , Humanos , Reembolso de Seguro de Saúde , Japão , Programas Nacionais de SaúdeRESUMO
Magnetic refrigeration (MR) is a method of cooling matter using a magnetic field. Traditionally, it has been studied for use in refrigeration near room temperature; however, recently MR research has also focused on a target temperature as low as 20 K for hydrogen liquefaction. Most research to date has employed high magnetic fields (at least 5 T) to obtain a large entropy change, which requires a superconducting magnet and, therefore, incurs a large energy cost. Here we propose an alternative highly efficient cooling technique in which small magnetic field changes, Δµ0H ≤ 0.4 T, can obtain a cooling efficiency of -ΔSM/Δµ0H = 32 J kg-1K-1T-1, which is one order of magnitude higher than what has been achieved using typical magnetocaloric materials. Our method uses holmium, which exhibits a steep magnetization change with varying temperature and magnetic field. The proposed technique can be implemented using permanent magnets, making it a suitable alternative to conventional gas compression-based cooling for hydrogen liquefaction.
RESUMO
AIMS: The Japanese government reimburses patients for drugs at prices specified in the Drug Price Standard (DPS) published by the National Health Insurance (NHI) scheme. It revises reimbursements for most drugs on the basis of their market prices. This study thereby identifies factors related to drugs or disease that impact market prices for drugs using the DPS list. MATERIALS AND METHODS: This study first examined the 2018 DPS list to identify all listed drugs, their prices, and their stipulated reimbursements. We then excluded from this study all the drugs for which prices are set per alternate rules. We calculated the percentage divergence between market prices and DPS prices and designated it our dependent variable. We performed descriptive and a univariate analysis on each variable and constructed multivariate regression models featuring independent variables for drug characteristics that might affect market prices. RESULTS: We identified 1,775 drugs with prices revised only by the market. We observed higher percentage divergences between DPS and market prices for drugs with generic alternatives (p < 0.001), drugs listed in the Japanese Pharmacopoeia (p < 0.001), and drugs for which at least two new drugs entered the same therapeutic category (p < 0.001). Injectable drugs exhibited a more significant and negative correlation with percentage divergences (p = 0.009) than ingestible drugs. Drugs that treat specific organs (p < 0.001), affect metabolism (p = 0.001), and those prescribed for non-therapeutic purposes (p < 0.001) display significantly higher percentage divergence than drugs affecting the nervous system and sensory organs. Divergences are less for narcotics (p < 0.001) and drugs that counter pathologic microorganisms and parasites (p = 0.004). CONCLUSIONS: Factors that elevate competition among pharmaceutical companies likely lower market prices for drugs, and the direction of prices under NHI in Japan is affected by the category of diseases a drug treats.
Assuntos
Custos de Medicamentos , Medicamentos Genéricos , Humanos , Japão , Programas Nacionais de SaúdeRESUMO
Mouse 3(17)alpha-hydroxysteroid dehydrogenase (AKR1C21) is the only aldo-keto reductase that catalyzes the stereospecific reduction of 3- and 17-ketosteroids to the corresponding 3(17)alpha-hydroxysteroids. The Y224D mutation of AKR1C21 reduced the K(m) value for NADP(H) by up to 80-fold and completely reversed the 17alpha stereospecificity of the enzyme. The crystal structure of the Y224D mutant at 2.3 A resolution revealed that the mutation resulted in a change in the conformation of the flexible loop B, including the V-shaped groove, which is a unique feature of the active-site architecture of wild-type AKR1C21 and is formed by the side chains of Tyr224 and Trp227. Furthermore, mutations (Y224F and Q222N) of residues involved in forming the safety belt for binding of the coenzyme showed similar alterations in kinetic constants for 3alpha-hydroxy/3-ketosteroids and 17-hydroxy/ketosteroids compared with the wild type.
Assuntos
Hidroxiesteroide Desidrogenases/química , Mutação , NADP/química , Animais , Apoenzimas/química , Apoenzimas/genética , Apoenzimas/metabolismo , Cristalografia por Raios X , Holoenzimas/química , Holoenzimas/genética , Holoenzimas/metabolismo , Hidroxiesteroide Desidrogenases/genética , Hidroxiesteroide Desidrogenases/metabolismo , Camundongos , Modelos Moleculares , NADP/metabolismo , Ligação Proteica , Estrutura Terciária de Proteína , Especificidade por Substrato , Tirosina/química , Tirosina/genética , Tirosina/metabolismoRESUMO
Ideal interaction-free magnetite nanoparticles were prepared, and their magnetic properties were measured to clarify the true nature of magnetic anisotropy of individual magnetite nanoparticles at the nanoscale and to analyze the shape, surface, and crystalline anisotropy contributions. Spherical (17.7 nm), cubic (10.6 nm), and octahedral-shaped magnetite nanoparticles with average sizes ranging from 7.6 to 23.4 nm were synthesized using solution techniques. Then, these nanoparticles were coated with silica at appropriate shell thicknesses to prepare magnetic interaction-free samples, and their noninteractive nature was confirmed through first-order reversal curve diagrams. For these well-isolated nanoparticles, remanent magnetizations of the hysteresis loops are just equal to a half of the saturation magnetization. This result clearly indicates that uniaxial magnetic anisotropy is predominant in each nanoparticle. In order to clarify the details of the uniaxial magnetic anisotropy, the analysis of blocking temperature-switching field distribution diagrams is constructed based on thermal decay curves of isothermal remanent magnetization at various applied fields. The obtained effective magnetic anisotropy constant Keff is distributed around 10-20 kJ/m3 and has insignificant size dependence. This result seems inconsistent with the inverse proportion relation of Keff with size predicted for surface magnetic anisotropy. The theoretical calculation suggested that the crystalline magnetic anisotropy plays a major role in magnetic properties of the magnetite nanoparticles at lower temperatures. However, it should be noted that Keff seems slightly different for the different shapes. The above study indicates that control size, shape, and interparticle interactions is required to strictly discuss such delicate differences of magnetic anisotropy of individual magnetite nanoparticles for the design of thermal seeds for magnetic hyperthermia.
RESUMO
The highly asymmetric lamellar (A-LAM) nanostructure is one of the most important template geometries for block copolymer (BCP) lithography. However, A-LAM is unattainable from conventional BCPs, and there is no general molecular design strategy for A-LAM-forming BCP. Herein, a nanoparticle-linear hybrid BCP system is reported, which is designed based on the intramolecular crosslinking technique, as a remarkably effective platform to obtain the A-LAM morphology. The hybrid BCPs consisting of polystyrene single-chain nanoparticles and linear polylactide segments show a remarkable capability to form the A-LAM morphology in bulk, where a maximum width ratio of 4.1 between the two domains is obtained. This unusual phase behavior is attributed to the bulky and rigid characteristics of the nanoparticle block. Furthermore, the thin films of these hybrid BCPs show perpendicularly oriented A-LAM morphology on a chemically modified Si substrate, allowing promising application in the fabrication of asymmetric line-and-space nanopatterns.
RESUMO
Discrete block co-oligomers (BCOs) are gaining considerable attention due to their potential to form highly ordered ultrasmall nanostructures suitable for lithographic templates. However, laborious synthetic routes present a major hurdle to the practical application. Herein, we report a readily available discrete BCO system that is capable of forming various self-assembled nanostructures with ultrasmall periodicity. Click coupling of propargyl-functionalized sugars (containing 1-7 glucose units) and azido-functionalized terpenoids (containing 3, 4, and 9 isoprene units) afforded the discrete and monodisperse BCOs with a desired total degree of polymerization and block ratio. These BCOs microphase separated into lamellar, gyroid, and cylindrical morphologies with the domain spacing (d) of 4.2-7.5 nm. Considering easy synthesis and rich phase behavior, presented BCO systems could be highly promising for application to diverse ~4-nm nanofabrications.
RESUMO
3(17)alpha-Hydroxysteroid dehydrogenase (AKR1C21) is a unique member of the aldo-keto reductase (AKR) superfamily owing to its ability to reduce 17-ketosteroids to 17alpha-hydroxysteroids, as opposed to other members of the AKR family, which can only produce 17beta-hydroxysteroids. In this paper, the crystal structure of a double mutant (G225P/G226P) of AKR1C21 in complex with the coenzyme NADP(+) and the inhibitor hexoestrol refined at 2.1 A resolution is presented. Kinetic analysis and molecular-modelling studies of 17alpha- and 17beta-hydroxysteroid substrates in the active site of AKR1C21 suggested that Gly225 and Gly226 play an important role in determining the substrate stereospecificity of the enzyme. Additionally, the G225P/G226P mutation of the enzyme reduced the affinity (K(m)) for both 3alpha- and 17alpha-hydroxysteroid substrates by up to 160-fold, indicating that these residues are critical for the binding of substrates.
Assuntos
Hidroxiesteroide Desidrogenases/genética , Mutação de Sentido Incorreto , Mutação Puntual , Substituição de Aminoácidos , Animais , Catálise , Cristalografia por Raios X , Hexestrol/metabolismo , Hexestrol/farmacologia , Hidroxiesteroide Desidrogenases/antagonistas & inibidores , Hidroxiesteroide Desidrogenases/química , Hidroxiesteroide Desidrogenases/metabolismo , Hidroxiesteroides/metabolismo , Camundongos , Modelos Moleculares , Mutagênese Sítio-Dirigida , NADP/química , Ligação Proteica , Conformação Proteica , Proteínas Recombinantes de Fusão/química , Relação Estrutura-Atividade , Especificidade por SubstratoRESUMO
A human member of the aldo-keto reductase (AKR) superfamily, AKR1B10, was identified as a biomarker of lung cancer, exhibiting high sequence identity with human aldose reductase (AKR1B1). Using recombinant AKR1B10 and AKR1B1, we compared their substrate specificity for biogenic compounds and inhibition by endogenous compounds and found the following unique features of AKR1B10. AKR1B10 efficiently reduced long-chain aliphatic aldehydes including farnesal and geranylgeranial, which are generated from degradation of prenylated proteins and metabolism of farnesol and geranylgeraniol derived from the mevalonate pathway. The enzyme oxidized aliphatic and aromatic alcohols including 20alpha-hydroxysteroids. In addition, AKR1B10 was inhibited by steroid hormones, bile acids and their metabolites, showing IC(50) values of 0.03-25 microM. Kinetic analyses of the alcohol oxidation and inhibition by the steroids and tolrestat, together with the docked model of AKR1B10-inhibitor complex, suggest that the inhibitory steroids and tolrestat bind to overlapping sites within the active site of the enzyme-coenzyme complex. Thus, we propose a novel role of AKR1B10 in controlling isoprenoid homeostasis that is important in cholesterol synthesis and cell proliferation through salvaging isoprenoid alcohols, as well as its metabolic regulation by endogenous steroids.
Assuntos
Aldeído Redutase/metabolismo , Álcoois/metabolismo , Aldeído Redutase/antagonistas & inibidores , Aldeído Redutase/química , Aldeído Redutase/genética , Aldo-Ceto Redutases , Ácidos e Sais Biliares/farmacologia , Domínio Catalítico , Colesterol/biossíntese , Inibidores Enzimáticos/farmacologia , Células HeLa , Humanos , Técnicas In Vitro , Cinética , Modelos Biológicos , Modelos Moleculares , Naftalenos/farmacologia , Proteínas Recombinantes/antagonistas & inibidores , Proteínas Recombinantes/química , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Esteroides/metabolismo , Esteroides/farmacologia , Especificidade por Substrato , Terpenos/metabolismo , TermodinâmicaRESUMO
A novel strategy for downsizing the feature of microphase-separated structures was developed via the intramolecular crosslinking reaction of block copolymers (BCPs) without changing the molecular weight. A series of BCPs consisting of poly[styrene-st-(p-3-butenyl styrene)] and poly(rac-lactide) (SBS-LA) was subjected to Ru-catalyzed olefin metathesis under highly diluted conditions to produce intramolecularly crosslinked BCPs (SBS(cl)-LAs). Small-angle X-ray scattering measurement and transmission electron microscopy observation of the SBS(cl)-LAs revealed feature size reduction in lamellar (LAM) and hexagonally close-packed cylinder (HEX) structures in the bulk state, which was surely due to the restricted chain dimensions of the intramolecularly crosslinked SBS block. Notably, the degree of size reduction was controllable by varying the crosslink density, with a maximum decrease of 22% in the LAM spacing. In addition, we successfully observed the downsizing of the HEX structure in the thin film state using atomic force microscopy, indicating the applicability of the present methodology to next-generation lithography technology.
RESUMO
Neutron diffractometry has been a critical tool for clarifying spin structures. In contrast, little attention has been paid to neutron transmission spectroscopy, even though they are different types of the same phenomenon. Soon, it will be possible to measure the wavelength dependence of transmissions easily using accelerator-driven neutron facilities. Therefore, we have started studying the potential of spectroscopy in magnetism, and in this paper, we report the first observation of a magnetic Bragg dip and Bragg edge in the neutron transmission spectra of a typical spin superstructure; clear antiferromagnetic Bragg dips and Bragg edges are found for a single crystal and powder of nickel oxide, respectively. The obtained results show that transmission spectroscopy is a promising tool for measurements under multi-extreme conditions and for the precise analyses of spin structures, not only in MW-class pulsed spallation source facilities but also in compact neutron source facilities.