The Effect of the Capping Agents of Nanoparticles on Their Redox Potential.

Engineered metallic nanoparticles, which are found in numerous applications, are usually stabilized by organic ligands influencing their interfacial properties. We found that the ligands affect tremendously the electrochemical peak oxidation potentials of the nanoparticles. In this work, identical gold nanoparticles were ligand-exchanged and carefully analyzed to enable a precise and highly reproducible comparison. The peak potential difference between gold nanoparticles stabilized by various ligands, such as 2- and 4-mercaptobenzoic acid, can be as high as 71 mV, which is substantial in energetic terms. A detailed study supported by density functional theory (DFT) calculations aimed to determine the source of this interesting effect. The DFT simulations of the ligand adsorption modes on Au surfaces were used to calculate the redox potentials through the thermodynamic cycle method. The DFT results of the peak potential shift were in good agreement with the experimental results for a few ligands, but showed some discrepancy, which was attributed to kinetic effects. The kinetic rate constant of the oxidation of Au nanoparticles stabilized by 4-mercaptobenzoic acid was found to be twice as large as that of the Au nanoparticles stabilized by citrate, as calculated from Laviron's theory and the Tafel equation. Finally, these findings could be applied to some novel applications such as determining the distribution of nanoparticle population in a dispersion as well as monitoring the ligand exchange between nanoparticles.

Influence of Charged Self-Assembled Monolayers on Single Nanoparticle Collision.

Studying nanoparticle (NP)-electrode interactions in single nanoparticle collision events is critical to understanding dynamic processes such as nanoparticle motion, adsorption, oxidation, and catalytic activity, which are abundant on electrode surfaces. Herein, NP-electrode electrostatic interactions are studied by tracking the oxidation of AgNPs at Au microelectrodes functionalized with charged self-assembled monolayers (SAMs). Tuning the charge of short alkanethiol-based monolayers and selecting AgNPs that can be partially or fully oxidized upon impact enabled probing the influence of attractive and repulsive NP-electrode electrostatic interactions on collision frequency, electron transfer, and nanoparticle sizing. We find that repulsive electrostatic interactions lead to a significant decrease in collision frequency and erroneous nanoparticle sizing. In stark difference, attractive electrostatic interactions dramatically increase the collision frequency and extend the sizing capability to larger nanoparticle sizes. Thus, these findings demonstrate how NP-monolayer interactions can be studied and manipulated by combining nanoimpact electrochemistry and functionalized SAMs.

Ionosomes: Observation of Ionic Bilayer Water Clusters.

Emulsification of immiscible two-phase fluids, i.e., one condensed phase dispersed homogeneously as tiny droplets in an outer continuous medium, plays a key role in medicine, food, chemical separations, cosmetics, fabrication of micro- and nanoparticles and capsules, and dynamic optics. Herein, we demonstrate that water clusters/droplets can be formed in an organic phase via the spontaneous assembling of ionic bilayers. We term these clusters ionosomes, by analogy with liposomes where water clusters are encapsulated in a bilayer of lipid molecules. The driving force for the generation of ionosomes is a unique asymmetrical electrostatic attraction at the water/oil interface: small and more mobile hydrated ions reside in the inner aqueous side, which correlate tightly with the lipophilic bulky counterions in the adjacent outer oil side. These ionosomes can be formed through electrochemical (using an external power source) or chemical (by salt distribution) polarization at the liquid-liquid interface. The charge density of the cations, the organic solvent, and the synergistic effects between tetraethylammonium and lithium cations, all affecting the formation of ionosomes, were investigated. These results clearly prove that a new emulsification strategy is developed providing an alternative and generic platform, besides the canonical emulsification procedure with either ionic or nonionic surfactants as emulsifiers. Finally, we also demonstrate the detection of individual ionosomes via single-entity electrochemistry.

Interactions of Microorganisms with Lipid Langmuir Layers.

Preventing microbial contamination of aquatic environments is crucial for the proper supply of drinking water. Hence, understanding the interactions that govern bacterial and virus adsorption to surfaces is crucial to prevent infection transmittance. Here, we describe a new approach for studying the organization and interactions of various microorganisms, namely, Escherichia coli (E. coli) bacteria, E. coli-specific bacteriophage T4, and plant cucumber green mottle mosaic viruses (CGMMV), at the air/water interface using the Langmuir-Blodgett (LB) technique. CGMMV were found as applicable candidates for further studying their interactions with Langmuir lipid monolayers. The zwitterionic, positively, and negatively charged LB lipid monolayers with adsorbed viruses were deposited onto solid supports and characterized by atomic force microscopy. Using polymerase chain reaction, we indicated that the adsorption of CGMMV onto the LB monolayer is a result of electrostatic interactions. These insights are useful in engineering membrane filters that prevent biofouling for efficient purification systems.

Approaches for measuring the surface areas of metal oxide electrocatalysts for determining their intrinsic electrocatalytic activity.

Great attention has been recently drawn to metal oxide electrocatalysts for electrocatalysis-based energy storage and conversion devices. To find the optimal electrocatalyst, a prerequisite is an activity metric that reasonably evaluates the intrinsic electrocatalytic activity of a particular catalyst. The intrinsic activity is commonly defined as the specific activity which is the current per unit catalyst surface area. Thus, the precise assessment of intrinsic activity highly depends on the reliable measurement of catalyst surface area, which calls for the knowledge of experimental approaches for determining the surface areas of metal oxide electrocatalysts. This tutorial review aims to summarize and analyze the approaches for measuring the surface areas of metal oxide electrocatalysts for evaluating and comparing their intrinsic electrocatalytic activities. We start by comparing the popular metrics for activity estimation and highlighting the importance of surface-area-normalized activity (i.e. specific activity) for intrinsic chemistry analysis. Second, we provide some general guidelines for experimentally measuring the electrochemically active surface area (ECSA). Third, we review the methods for the surface area measurement of metal oxide electrocatalysts. The detailed procedure for each method is explicitly described to provide a step-by-step manual that guides researchers to perform the measurement; the rationales and uncertainties for each method are discussed to help readers justify the reliable assessment of surface area. Next, we give our recommendations on selecting a rational experimental approach for the surface area measurement of a particular metal oxide electrocatalyst. Lastly, we discuss the future challenges of ECSA measurement and present an exemplary novel ECSA technique.

Additive-Free Electrophoretic Deposition of Graphene Quantum Dots Thin Films.

The electrophoretic deposition (EPD) of graphene-based materials on transparent substrates is highly potential for many applications. Several factors can determine the yield of the EPD process, such as applied voltage, deposition time and particularly the presence of dispersion additives (stabilisers) in the suspension solution. This study presents an additive-free EPD of graphene quantum dot (GQD) thin films on an indium tin oxide (ITO) glass substrate and studies the deposition mechanism with the variation of the applied voltage (10-50 V) and deposition time (5-25 min). It is found that due to the small size (≈3.9 nm) and high content of deprotonated carboxylic groups, the GQDs form a stable dispersion (zeta-potential of about -35 mV) without using additives. The GQD thin films can be deposited onto ITO with optimal surface morphology at 30 V in 5 min (surface roughness of approximately (3.1±1.3) nm). In addition, as-fabricated GQD thin films also possess some interesting physico-optical properties, such as a double-peak photoluminescence at about λ=417 and 439 nm, with approximately 98 % visible transmittance. This low-cost and eco-friendly GQD thin film is a promising material for various applications, for example, transparent conductors, supercapacitors and heat conductive films in smart windows.

Selective Binding and Precipitation of Cesium Ions from Aqueous Solutions: A Size-Driven Supramolecular Reaction.

The nuclear disasters of Chernobyl and Fukushima presented an urgent need for finding solutions to treatment of radioactive wastes. Among the by-products of nuclear fission is radioactive 137 Cs, which evokes an environmental hazard due to its long half-life (>30 years) and high solubility in water. In this work, a water-soluble organic ligand, readily obtained from alloxan and 1,3,5-benzenetriol, has been found to selectively bind and precipitate Cs+ ions from aqueous solutions. The special rigid structure of the ligand, which consists of a "tripodal" carbonyl base above and below an aromatic plane, contributes to the size-driven selectivity towards the large Cs+ ions and the formation of a giant, insoluble supramolecular complex. In addition to the low costs of the ligand, high yields and effectiveness in precipitating Cs+ ions, the Cs-complex revealed a high endurance to continuous doses of γ-radiation, increasing its potential to act as a precipitating agent for 137 Cs.

The role of hydrophobic, aromatic and electrostatic interactions between amino acid residues and a titanium dioxide surface.

Understanding the nature of interactions between inorganic surfaces and biomolecules, such as amino acids and peptides, can enhance the development of new materials. Here, we present single molecule force spectroscopy (SMFS) measurements of the interactions between an atomic force microscopy (AFM) probe, modified with various amino acids, and a titanium dioxide surface. Specifically, we study the affinity of amino acids toward a titanium dioxide surface bearing hydrophobic (Leu), aromatic (Phe) and hydrophilic (Orn) residues. We find that aromatic interactions dominate over aliphatic in their affinity to the titanium dioxide surface. In addition, we show that by combining aromatic and hydrophilic moieties in a single amino acid (NH2-Phe), the adhesion of the latter to the surface increases. Furthermore, the affinity of positively charged amino acids to the titanium dioxide surface is higher than that of uncharged, and can be increased more, with elevating the pH of the buffer above the pKa of the basic residues. The kinetic and thermodynamic parameters imply that the dynamics of the surface-amino acid interface are mostly governed by hydrophobic interactions.

Electrochemical Dynamics of a Single Platinum Nanoparticle Collision Event for the Hydrogen Evolution Reaction.

Chronoamperometry was used to study the dynamics of Pt nanoparticle (NP) collision with an inert ultramicroelectrode via electrocatalytic amplification (ECA) in the hydrogen evolution reaction. ECA and dynamic light scattering (DLS) results reveal that the NP colloid remains stable only at low proton concentrations (1.0 mm) under a helium (He) atmosphere, ensuring that the collision events occur at genuinely single NP level. Amperometry of single NP collisions under a He atmosphere shows that each discrete current profile of the collision event evolves from spike to staircase at more negative potentials, while a staircase response is observed at all of the applied potentials under hydrogen-containing atmospheres. The particle size distribution estimated from the diffusion-controlled current in He agrees well with electron microscopy and DLS observations. These results shed light on the interfacial dynamics of the single nanoparticle collision electrochemistry.

Carbon Nanotube Based Flow-Through Electrochemical Cell for Electroanalysis.

A flow-through electrode made of a carbon nanotubes (CNT) film deposited on a polytetrafluoroethylene (PTFE) membrane was assembled and employed for the determination of low concentration of copper as a model system by linear sweep anodic stripping voltammetry (LSASV). CNT films with areal mass ranging from 0.12 to 0.72 mg cm-2 were characterized by measurement of sheet resistance, water permeation flux and capacitance. Moreover, CNT with two different sizes and PTFE membrane with two different pore diameters (0.45 and 5.0 µm) were evaluated during the optimization of the electrode. Thick layers made of small CNT exhibited the lowest sheet resistance and the greatest analytical response, whereas thin layers of large CNT had the lowest capacitance and the highest permeation flux. Electrodes made of 0.12 mg cm-2 of large CNT deposited on 5.0 µm PTFE enabled sufficiently high mass transfer and collection efficiency for detecting 64 ppt of Cu(II) within 5 min of deposition and 4.0 mL min-1 flow rate. The analytical response was linear over 4 orders of magnitude (10-9 to 10-5 M) of Cu(II). The excellent performance of the flow-through CNT membrane integrated in a flow cell makes it an appealing approach not only for electroanalysis, but also for the electrochemical treatment of waters, such as the removal of low concentrations of heavy metals and organics.

A novel approach for oxidation analysis of therapeutic proteins.

Measuring and monitoring of protein oxidation modifications is important for biopharmaceutical process development and stability assessment during long-term storage. Currently available methods for biomolecules oxidation analysis use time-consuming peptide mapping analysis. Therefore, it is desirable to develop high-throughput methods for advanced process control of protein oxidation. Here, we present a novel approach by which oxidative protein modifications are monitored by an indirect potentiometric method. The method is based on adding an electron mediator, which enhances electron transfer (ET) between all redox species and the electrode surface. Specifically, the procedure involves measuring the sharp change in the open circuit potential (OCP) for the mediator system (redox couple) as a result of its interaction with the oxidized protein species in the solution. Application of Pt and Ag/AgCl microelectrodes allowed for a high-sensitivity protein oxidation analysis. We found that the Ru(NH3)6(2+/3+) redox couple is suitable for measuring the total oxidation of a wide range of therapeutic proteins between 1.1 and 13.6%. Accuracy determined by comparing with the known percentage oxidation of the reference standard showed that percentage oxidation determined for each sample was within ± 20% of the expected percentage oxidation determined by mass spectrometry.

Electrochemical detection of low concentrations of mercury in water using gold nanoparticles.

The electrochemical detection of mercury in aqueous solutions was studied at glassy carbon (GC) and indium-tin oxide (ITO) electrodes modified by gold nanoparticles (Au NPs). Two methods of modification were used: electrochemical reduction of HAuCl4 and electrostatic adsorption of Au NPs stabilized by citrate. We found that the Au NPs modified surfaces yielded higher sensitivity and sharper and more reproducible stripping peaks of Hg as compared with the bare electrodes. The effect of the modification by Au NPs on the stripping potential was examined. Interestingly, the stripping of Hg on GC and ITO modified by Au NPs occurred at the same potential as on bare GC and ITO, respectively. Only the full coverage of ITO by either electrochemically deposited Au for a long time or by vapor deposition, shifted the stripping potential more positive by ca. 0.4 V to that observed on a bare Au electrode. These and further experiments led us to conclude that the Au NPs served as nucleation sites for the deposition of Hg, whereas the GC or ITO are superior for the stripping of mercury. Hence, a combination of well-defined Au NPs on ITO or GC were found ideal for the electrochemical detection of Hg. Indeed, we achieved a remarkable detection limit of 1 µm·L(-1) of Hg using an ITO surface modified by electrostatically adsorbed Au NPs.

Electrochemically "writing" graphene from graphene oxide.

A novel approach of patterning graphene on conductive surfaces based on local electrochemical reduction of graphene oxide is reported. Graphene is "written" from typical graphene oxide dispersion by applying negative potential on conductive surfaces vs. a micrometer-sized counter electrode "pen" with scanning electrochemical microscopy (SECM). Micrometer scaled patterns are successfully generated on gold and stainless steel surfaces.

In situ electrodeposition of an asymmetric sol-gel membrane based on an octadecyltrimethoxysilane Langmuir film.

The unique properties of Langmuir film formation were utilized in assembling a thin skin of an asymmetric membrane. An octadecyltrimethoxysilane (ODTMS) Langmuir monolayer was formed at the air-water interface and served as the substrate for growing a bulky sol-gel polymer in situ. The latter was based on the electrochemical deposition of tetramethoxysilane dissolved in the water subphase by means of horizontal touch electrochemistry. The resultant asymmetric layer that consisted of a thin hydrophobic ODTMS Langmuir film connected to a bulk hydrophilic sol-gel network was studied in situ and ex situ by using various techniques, such as cyclic voltammetry, electrochemical impedance spectroscopy (EIS), scanning electron microscopy, transmission electron microscopy (TEM), and goniometry. We found that a porous hydrophilic film grew on top of a hydrophobic layer as was evident from TEM, contact angle, and EIS analyses. The film thickness and film permeability could be controlled by changing the deposition conditions such as the potential window applied and its duration. Hence, this method offers an alternative approach for assembling asymmetric films for various applications.

Preparation and characterization of alkylphosphonic acid self-assembled monolayers on titanium alloy by chemisorption and electrochemical deposition.

Ti-6Al-4V alloy is the most commonly used alloy for dental and orthopedic implants. In order to improve osseointegration, different surface modification methods are usually employed, including self-assembled monolayers (SAMs). This study presents an investigation of both active (electroassisted) and passive (adsorption) approaches for the modification of Ti-6Al-4V using alkylphosphonic acid. The monolayers were characterized by cyclic voltammetry, double-layer capacitance, contact angle measurements, X-ray photoelectron spectroscopy, polarization modulation infrared reflection adsorption spectroscopy, electrochemical impedance spectroscopy, and corrosion potentiodynamic polarization measurements. It is shown that the electrochemically assisted monolayers, which are assembled faster, exhibit better control over surface properties, a superior degree of order, and a somewhat higher packing density. The electrosorbed SAMs also exhibit better blockage of electron transfer across the interface and thus have better corrosion resistance.

Nanoparticle-imprinted polymers for size-selective recognition of nanoparticles.

Citrate-stabilized gold nanoparticles 15 nm and 33 nm in diameter were transferred concomitantly with a monolayer of positively charged polyaniline by Langmuir-Blodgett transfer at pH 5 onto a conducting indium-doped tin oxide (ITO) support. Films consisting of one to three layers of polyaniline with thicknesses of 1-3 nm were prepared and characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy. After electro-oxidation of the Au nanoparticles in 0.1 M KCl, cavities were left behind in the film that could be analyzed by SEM. These cavities were able to recapture analyte nanoparticles from a solution of pH 10 and showed size-exclusion properties. The amount of nanoparticles taken up by the cavities was conveniently analyzed by measuring the charge associated with the electro-oxidation of these particles in 0.1 M KCl after the film had been rinsed with water. The size-exclusion properties improved with the number of Langmuir-Blodgett layers transferred.

Local deposition of anisotropic nanoparticles using scanning electrochemical microscopy (SECM).

We demonstrate localized electrodeposition of anisotropic metal nanoobjects, namely Au nanorods (GNR), on indium tin oxide (ITO) using scanning electrochemical microscopy (SECM). A gold microelectrode was the source of the gold ions whereby double pulse chronoamperometry was employed to generate initially Au seeds which were further grown under controlled conditions. The distance between the microelectrode and the ITO surface as well as the different experimental parameters (electrodeposition regime, solution composition and temperature) were optimized to produce faceted gold seeds with the required characteristics (size and distribution). Colloidal chemical synthesis was successfully exploited for better understanding the role of the surfactant and different additives in breaking the crystallographic symmetry and anisotropic growth of GNR. Experiments performed in a conventional three-electrode cell revealed the most appropriate electrochemical conditions allowing high yield synthesis of nanorods with well-defined shape as well as nanocubes and bipyramids.

Electrochemical co-deposition of conductive polymer-silica hybrid thin films.

Conductive polymers, such as polypyrrole (ppy), have been the subject of numerous studies due to their promising applications in organic solar cells, flexible electronics, electrochromic devices, super capacitors, etc. Yet, their application is still limited as a result of poor processability. Silica has been reported to improve the mechanical strength and adhesion of conductive polymer films. In this work, we propose a controllable electrochemical approach for preparing ppy-silica hybrid thin films from a solution containing both pyrrole and silane monomers. It is known that pyrrole can be electropolymerised using anodic potentials, while silica can be electrodeposited under cathodic potentials. Thus, we studied the formation of ppy-silica hybrid thin films on a stainless steel surface by applying alternating potentials, i.e. cathodic followed by anodic pulses (denoted C + A) or anodic followed by cathodic pulses (denoted A + C). We show that by controlling the deposition potential and time for the cathodic and anodic pulses, the film thickness and composition can be manipulated well as analysed using profilometry and EDX. The element depth profile of the films was characterized using secondary ion mass spectroscopy (SIMS). In essence, for the C + A process, pyrrole diffuses through the cathodically electrodeposited wet silica gel layer and undergoes anodic polymerisation on the substrate, while for the A + C process, silane can be electrodeposited both on top of the anodically electrodeposited conductive ppy films as well as on the stainless steel through the pinholes in the ppy film. This offers a simple approach for tuning the structure of conductive polymer-sol-gel composite films.

High Recognition of Isomer-Stabilized Gold Nanoparticles through Matrix Imprinting.

The development of highly selective probes for nanoparticles is required due to their nanotoxicity. The latter strongly depends on the size, structure, and interfacial properties of the nanoparticles. Here, we demonstrate that a simple approach for the selective detection of Au nanoparticles that differ in their capping agent shows very high promise. Specifically, gold nanoparticles stabilized by each of the three different isomers of mercaptobenzoic acid (MBA) were imprinted in a soft matrix by adsorption of the nanoparticles, followed by filling the non-occupied areas through electropolyermization of an aryl diazonium salt (ADS). Nanocavities bearing the shape of the Au nanoparticles were formed upon the electrochemical dissolution of the nanoparticles, which were used for the reuptake of the Au nanoparticles stabilized by the different isomers. High reuptake selectivity was found where the originally imprinted nanoparticles were recognized better than the Au nanoparticles stabilized by other MBA isomers. Furthermore, an imprinted matrix by nanoparticles stabilized by 4-MBA could also recognize nanoparticles stabilized by 2-MBA, and vice versa. A detailed study using Raman spectroscopy and electrochemistry disclosed the organization of the capping isomers on the nanoparticles as well as the specific nanoparticle-matrix interactions that were responsible for the high reuptake selectivity observed. Specifically, the Raman band at ca. 910 cm-1 for all AuNP-matrix systems implies the formation of a carboxylic acid dimer and thus the interaction of the ligands with the matrix. These results have implications for the selective and simple sensing of engineered nanoparticles.

Imprinting of nanoparticles in thin films: Quo Vadis?

Nanomaterials, and especially nanoparticles, have been introduced to almost any aspect of our lives. This has caused increasing concern as to their toxicity and adverse effects on the environment and human health. The activity of nanoparticles, including their nanotoxicity, is not only a function of the material they are made of but also their size, shape, and surface properties. It is evident that there is an unmet need for simple approaches to the speciation of nanoparticles, namely to monitor and detect them based on their properties. An appealing method for such speciation involves the imprinting of nanoparticles in soft matrices. The principles of imprinting nanoparticles originate from the molecularly imprinted polymer (MIP) approach. This review summarizes the current status of this emerging field, which bridges between the traditional MIP approach and the imprinting of larger entities such as viruses and bacteria. The concepts of nanoparticle imprinting and the requirement of both physical and chemical matching between the nanoparticles and the matrix are discussed and demonstrated.