Toughening Polyamidoamine Hydrogels through Covalent Grafting of Short Silk Fibers.

Linear amphoteric polyamidoamines (PAAs) are usually water-soluble, biodegradable and biocompatible. Crosslinked PAAs form in water hydrogels, retaining most of the favorable properties of their linear counterparts. The hydrogels prepared by the radical post-polymerization of the oligo-α,ω-bisacrylamido-terminated PAA called AGMA1, obtained by the polyaddition of 4-aminobutylguanidine (agmatine) with 2,2-bis(acrylamido)acetic acid, exhibit excellent cell-adhesion properties both in vitro and in vivo. However, due to their low mechanical strength, AGMA1 hydrogels cannot be sewn to biological tissues and need to be reinforced with fibrous materials. In this work, short silk fibers gave excellent results in this sense, proving capable of establishing covalent bonds with the PAA matrix, thanks to their lysine content, which provided amino groups capable of reacting with the terminal acrylamide groups of the AGMA1 precursor in the final crosslinking phase. Morphological analyses demonstrated that the AGMA1 matrix was intimately interconnected and adherent to the silk fibers, with neither visible holes nor empty volumes. The silk/H-AGMA1 composites were still reversibly swellable in water. In the swollen state, they could be sewn and showed no detachment between fibers and matrix and exhibited significantly improved mechanical properties compared with the plain hydrogels, particularly as regards their Young's modulus and elongation at break.

Nanosized T1 MRI Contrast Agent Based on a Polyamidoamine as Multidentate Gd Ligand.

A linear polyamidoamine (PAA) named BAC-EDDS, containing metal chelating repeat units composed of two tert-amines and four carboxylic groups, has been prepared by the aza-Michael polyaddition of ethylendiaminodisuccinic (EDDS) with 2,2-bis(acrylamido)acetic acid (BAC). It was characterized by size exclusion chromatography (SEC), FTIR, UV-Vis and NMR spectroscopies. The pKa values of the ionizable groups of the repeat unit were estimated by potentiometric titration, using a purposely synthesized molecular ligand (Agly-EDDS) mimicking the structure of the BAC-EDDS repeat unit. Dynamic light scattering (DLS) and ζ-potential analyses revealed the propensity of BAC-EDDS to form stable nanoaggregates with a diameter of approximately 150 nm at pH 5 and a net negative charge at physiological pH, in line with an isoelectric point <2. BAC-EDDS stably chelated Gd (III) ions with a molar ratio of 0.5:1 Gd (III)/repeat unit. The stability constant of the molecular model Gd-Agly-EDDS (log K = 17.43) was determined as well, by simulating the potentiometric titration through the use of Hyperquad software. In order to comprehend the efficiency of Gd-BAC-EDDS in contrasting magnetic resonance images, the nuclear longitudinal (r1) and transverse (r2) relaxivities as a function of the externally applied static magnetic field were investigated and compared to the ones of commercial contrast agents. Furthermore, a model derived from the Solomon-Bloembergen-Morgan theory for the field dependence of the NMR relaxivity curves was applied and allowed us to evaluate the rotational correlation time of the complex (τ = 0.66 ns). This relatively high value is due to the dimensions of Gd-BAC-EDDS, and the associated rotational motion causes a peak in the longitudinal relaxivity at ca. 75 MHz, which is close to the frequencies used in clinics. The good performances of Gd-BAC-EDDS as a contrast agent were also confirmed through in vitro magnetic resonance imaging experiments with a 0.2 T magnetic field.

Multifunctional Nanovectors Based on Polyamidoamine Polymers for Theranostic Application.

We present multifunctional, biocompatible and biodegradable magnetic nanovectors based on different polyamidoamine (PAA) polymers tailored with different diagnostic and therapeutic properties. Using maghemite nanoparticles with average size 15.5 ± 2.8 nm prepared by thermal decomposition, superparamagnetic nanovectors were obtained by coating the nanoparticles with synthetic polymers of PAA. These have a segmented copolymer structure, and bear PAA segments containing different amount of carboxyl groups per repeating units together with PEG segments. These copolymers are thought to combine the binding properties of the carboxylated PAA segments to inorganic nanoparticles, with the stealth properties of the PEG ones. The magnetic, hyperthermal and relaxometric properties of the synthesized samples were investigated. Magnetic measurements revealed that the samples are superparamagnetic at room temperature and the overall magnetic behavior is not affected by the functionalization process. Calorimetric measurements demonstrated a good heating efficiency at alternating magnetic field parameters below the human tolerability threshold (SAR of ca. 70 W/g at 260 Hz and 10.8 kA/m). 1H-NMR relaxivities were relevant compared to the values of the commercial contrast agents over the whole investigated frequency range.

Enhanced photoinduced antibacterial activity of a BODIPY photosensitizer in the presence of polyamidoamines.

Photosensitizers belonging to the boron-dipyrromethenes (BODIPYs) class were recently found endowed with good efficacy in the antibacterial photodynamic therapy (aPDT) against both Gram-positive and Gram-negative bacteria. In this paper, we report on the remarkable adjuvant effect exerted in this respect by linear polyamidoamines (PAAs), a family of moderately basic polymers obtained by Michael-type polyaddition of amines to bisacrylamides. Three different PAAs (AGMA1, BP-AGMA, and BP-DMEDA) were studied, testing for each two different molecular weight samples (8000 and 24000 Da). At nontoxic concentrations (1 or 10 µg mL-1) all PAAs remarkably improved the killing efficacy of BODIPY upon irradiation with a green LED device (range: from 480 to 580 nm with λmax = 525 nm) up to an energy rate of 16.6 J cm-2. A 6-7 log unit decrease in bacteria survival was observed with concentrations of BODIPY of 1.0 and 0.1 µM in the case of Escherichia coli and Staphylococcus aureus, respectively. The one-way analysis of variance (ANOVA) was used to evaluate the statistical significance of different treatments (n ≥ 3). Thus, the PAA-photosensitizer combination warrants potentially as a new, effective, and mild method of killing bacteria. Moreover, the antibacterial treatment here reported might be successfully applied to defeat the bacterial resistance often encountered with many antibacterial drugs owing to the double action of this two-component treatment.

Agmatine-containing poly(amidoamine)s as a novel class of antiviral macromolecules: structural properties and in vitro evaluation of infectivity inhibition.

Poly(amidoamine)s (PAAs) are multifunctional tert-amine polymers endowed with high structural versatility. Here we report on the screening of a minilibrary of PAAs against a panel of viruses. The PAA AGMA1 showed antiviral activity against herpes simplex virus, human cytomegalovirus, human papillomavirus 16, and respiratory syncytial virus but not against human rotavirus and vesicular stomatitis virus. The results suggest the contribution of both a polycationic nature and side guanidine groups in imparting antiviral activity.

A soluble biocompatible guanidine-containing polyamidoamine as promoter of primary brain cell adhesion and in vitro cell culturing.

This paper reports on a novel application of an amphoteric water-soluble polyamidoamine named AGMA1 bearing 4-butylguanidine pendants. AGMA1 is an amphoteric, prevailingly cationic polyelectrolyte with isoelectric point of about 10. At pH 7.4 it is zwitterionic with an average of 0.55 excess positive charges per unit, notwithstanding it is highly biocompatible. In this work, it was found that AGMA1 surface-adsorbed on cell culturing coverslips exhibits excellent properties as adhesion and proliferation promoter of primary brain cells such as microglia, as well as of hippocampal neurons and astrocytes. Microglia cells cultured on AGMA1-coated coverslips substrate displayed the typical resting, ramified morphology of those cultured on poly-L-lysine and poly-L-ornithine, employed as reference substrates. Mixed cultures of primary astrocytes and neuronal cells grown on AGMA1- and poly-L-lysine coated coverslips were morphologically undistinguishable. On both substrates, neurons differentiated axon and dendrites and eventually established perfectly functional synaptic contacts. Quantitative immunocytochemical staining revealed no difference between AGMA1 and poly-L-lysine. Electrophysiological experiments allowed recording neuron spontaneous activity on AGMA1. In addition, cell cultures on both AGMA1 and PLL displayed comparable excitatory and inhibitory neurotransmission, demonstrating that the synaptic contacts formed were fully functional.

Silk/Polyamidoamine Membranes for Removing Chromium VI from Water.

Polyamidoamine hydrogels prepared by the radical post-polymerization of α,ω-bisacrylamide-terminated M-AGM oligomers, in turn obtained by the polyaddition of 4-aminobutylguanidine with N,N'-methylenebisacrylamide, were reinforced with raw silk fibers, which can establish covalent bonds with the polyamidoamine matrix via reaction of the amine groups in the lysine residues with the acrylamide terminals of the M-AGM oligomer. Silk/M-AGM membranes were prepared by impregnating silk mats with M-AGM aqueous solutions and subsequent crosslinking by UV irradiation. The guanidine pendants of the M-AGM units imparted the ability to form strong but reversible interactions with oxyanions, including the highly toxic chromate ions. The potential of the silk/M-AGM membranes to purify Cr(VI)-contaminated water down to the drinkability level, that is, below 50 ppb, was tested by performing sorption experiments both in static (Cr(VI) concentration 20-2.5 ppm) and flow conditions (Cr(VI) concentration 10-1 ppm). After static sorption experiments, the Cr(VI)-loaded silk/M-AGM membranes could easily be regenerated via treatment with a 1 M sodium hydroxide solution. Dynamic tests performed using two stacked membranes and a 1 ppm Cr(VI) aqueous solution reduced Cr(VI) concentration down to 4 ppb. Remarkably, the use of renewable sources, the environmentally friendly preparation process, and the goal achieved meet eco-design requirements.

Nanosponges by the oxo-Michael polyaddition of cyclodextrins as sorbents of water pollutants: the o-toluidine case.

Hydrophilic cyclodextrin nanosponges were prepared by the oxo-Michael polyaddition in an aqueous solution at pH > 10 of α-, ß-, and γ-cyclodextrin with 1,4-bisacryloylpiperazine or 2,2-bisacrylamidoacetic acid. These nanosponges and, for comparison purposes, their precursor cyclodextrins were tested as sorbents of o-toluidine, a carcinogenic wastewater contaminant, by monitoring the depletion of o-toluidine from a 10-4 M (10 ppm) aqueous solutions. To this aim, an innovative analytical procedure was used: The voltammetric peak currents of o-toluidine in linear sweep voltammetry experiments were registered using multi-walled carbon nanotubes-modified glassy carbon electrodes. The experimental sorption curves fitted a mono-exponential kinetic model, and the residual o-toluidine was 0.16 ppm, one order of magnitude lower than those of all other sorbents reported so far. The sorption capacities ranged from 88 to 199 µmol g-1 (10-21.3 mg g-1), equal to or higher than those of the parent cyclodextrins. All nanosponges were completely regenerated by extracting with methanol. After regeneration, the sorption capacity slightly improved, suggesting a rearrangement of the nanosponge network. Overall, it may be reasonably concluded that the cyclodextrin nanosponges reported in this paper warrant potential as o-toluidine exhaustive sorbents.

On the Suitability of Phosphonate-Containing Polyamidoamines as Cotton Flame Retardants.

A novel polyamidoamine (M-PCASS) bearing a disulfide group and two phosphonate groups per repeat unit was obtained by reacting N,N'-methylenebisacrylamide with a purposely designed bis-sec-amine monomer, namely, tetraethyl(((disulfanediylbis(ethane-2,1-diyl))bis(azanediyl))bis(ethane-2,1-diyl))bis(phosphonate) (PCASS). The aim was to ascertain whether the introduction of phosphonate groups, well-known for inducing cotton charring in the repeat unit of a disulfide-containing PAA, increased its already remarkable flame retardant efficacy for cotton. The performance of M-PCASS was evaluated by different combustion tests, choosing M-CYSS, a polyamidoamine containing a disulfide group but no phosphonate groups, as a benchmark. In horizontal flame spread tests (HFSTs), M-PCASS was a more effective flame retardant than M-CYSS at lower add-ons with no afterglow. In vertical flame spread tests, the only effect was afterglow suppression with no self-extinguishment even at add-ons higher than in HFSTs. In oxygen-consumption cone calorimetry tests, M-PCASS decreased the heat release rate peak of cotton by 16%, the CO2 emission by 50%, and the smoke release by 83%, leaving a 10% residue to be compared with a negligible residue for untreated cotton. Overall, the set of results obtained envisage that the newly synthesized phosphonate-containing PAA M-PCASS may be suitable for specific applications as flame retardant, where smoke suppression or reduction of total gas released is a key requirement.

Luminescent rhenium and ruthenium complexes of an amphoteric poly(amidoamine) functionalized with 1,10-phenanthroline.

A new amphoteric copolymer, PhenISA, has been obtained by copolymerization of 4-(4'-aminobutyl)-1,10-phenanthroline (BAP) with 2-methylpiperazine and bis(acrylamido)acetic acid (BAC) (6% of phenanthroline-containing repeating units). The copolymer showed excellent solubility in water, where it self-aggregated to give clear nanoparticle suspensions (hydrodynamic diameter = 21 ± 2 nm, by dynamic light scattering (DLS) analysis). The phenanthroline pendants of the polymer stably coordinated either Re(CO)(3)(+) or Ru(phen)(2)(2+) fragments, affording luminescent Re-PhenISA, Re-Py-PhenISA, and Ru-PhenISA polymer complexes, emitting from triplet metal-to-ligand charge transfer ((3)MLCT) excited states (with λ(em) = 608, 571, and 614 nm, respectively, and photoluminescence quantum yields Φ(em) = 0.7%, 4.8%, and 4.1%, in aerated water solution, respectively). DLS analyses indicated that the polymer complexes maintained the nanosize of PhenISA. All the complexes were stable under physiological conditions (pH 7.4, 0.15 M NaCl) in the presence of an excess of the ubiquitous competitor cysteine. In vitro viability assays showed no toxicity of Re-Py-PhenISA and Ru-PhenISA complexes, at concentrations in the range of 0.5-50 µM (calculated on the metal-containing unit), toward HEK-293 (human embryonic kidney) cells. A preliminary investigation of internalization in HEK-293 cells, by means of fluorescence confocal microscopy, showed that Ru-PhenISA enters cells via an endocytic pathway and, subsequently, homogeneously diffuse within the cytoplasm across the vesicle membranes.

L-Arginine-Derived Polyamidoamine Oligomers Bearing at Both Ends ß-Cyclodextrin Units as pH-Sensitive Curcumin Carriers.

The aza-Michael polyaddition of L-arginine and N,N'-methylene-bis-acrylamide gives the biocompatible and easily cell-internalized polyamidoamine ARGO7. By controlled synthesis, two ARGO7 oligomers, namely a trimer and a pentamer, bearing acrylamide terminal units, were obtained as precursors of the ß-cyclodextrin-end-terminated oligomers P3 and P5, which have been shown to encapsulate curcumin at both pH 7.4 and 4.5. After lyophilization, P3- and P5-curcumin complexes gave stable water solutions. The apparent solubility of encapsulated curcumin was in the range 20-51 µg mL-1, that is, three orders of magnitude higher than the water solubility of free curcumin (0.011 µg mL-1). The drug release profiles showed induction periods both at pH levels 4.5 and 7.4, suggesting a diffusive release mechanism, as confirmed by kinetic studies. The release rate of curcumin was higher at pH 7.4 than at pH 4.5 and, in both cases, it was higher for the P5 complex. Encapsulated curcumin was more photostable than the free drug. Molecular mechanics and molecular dynamics simulations explain at atomistic level the formation of aggregates due to favorable van der Waals interactions. The drug molecules interact with the external surface of carriers or form inclusion complexes with the ß-cyclodextrin cavities. The aggregate stability is higher at pH 4.5.

Semi-Crystalline Hydrophobic Polyamidoamines: A New Family of Technological Materials?

The hitherto known polyamidoamines (PAAs) are not suitable as structural materials because they are usually water-soluble or swellable in water. This paper deals with the synthesis and characterization of semi-crystalline hydrophobic PAAs (H-PAAs) by combining different bis-sec-amines with bis-acrylamides obtained from C6-C12 bis-prim-amines. H-PAAs were initially obtained in a solution of benzyl alcohol, a solvent suitable for both monomers and polymers. Their number average molecular weights, M¯n, which were determined with 1H-NMR by evaluating the percentage of their terminal units, varied from 6000 to >10,000. The solubility, thermal properties, ignitability and water resistance of H-PAAs were determined. They were soluble in organic solvents, semi-crystalline and thermally stable. The most promising ones were also prepared using a bulk process, which has never been previously reported for PAA synthesis. In the form of films, these H-PAAs were apparently unaffected by water. The films underwent tensile and wettability tests. They showed similar Young moduli (260-263 MPa), whereas the maximum stress and the stress at break depended on the number of methylene groups of the starting bis-acrylamides. Their wettability was somewhat higher than that of common Nylons. Interestingly, none of the H-PAAs considered, either as films or powders, ignited after prolonged exposure to a methane flame.

Amphoteric agmatine containing polyamidoamines as carriers for plasmid DNA in vitro and in vivo delivery.

In this paper we report on the investigation, as DNA nonviral carriers, of three samples of an amphoteric polyamidoamine bearing 4-aminobutylguanidine deriving units, AGMA5, AGMA10, and AGMA20, characterized by different molecular weights (M(w) 5100, 10100, and 20500, respectively). All samples condensed DNA in spherical, positively charged nanoparticles and protected it against enzymatic degradation. AGMA10 and AGMA20 polyplexes had average diameters lower than 100 nm. AGMA5 polyplexes were larger. All polyplexes showed negligible cytotoxicity and were internalized in cells. AGMA10 and AGMA20 performed differently from AGMA5 as nucleic acid carriers in vitro. AGMA10 and AGMA20 effectively promoted transfection, whereas AGMA5 was ineffective. FITC-labeled AGMA10 was prepared and the intracellular trafficking of its DNA polyplex was studied. DNA/AGMA10 polyplex was largely localized inside the nucleus, while AGMA10 concentrated in the perinuclear region. DNA/AGMA10 polyplex intravenously administered to mice promoted gene expression in liver but not in other organs without detectable toxic side effects.

Highlight on the Mechanism of Linear Polyamidoamine Degradation in Water.

This paper aims at elucidating the degradation mechanism of linear polyamidoamines (PAAs) in water. PAAs are synthesized by the aza-Michael polyaddition of prim-monoamines or bis-sec-amines with bisacrylamides. Many PAAs are water-soluble and have potential for biotechnological applications and as flame-retardants. PAAs have long been known to degrade in water at pH ≥ 7, but their degradation mechanism has never been explored in detail. Filling this gap was necessary to assess the suitability of PAAs for the above applications. To this aim, a small library of nine PAAs was expressly synthesized and their degradation mechanism in aqueous solution studied by 1H-NMR in different conditions of pH and temperature. The main degradation mechanism was in all cases the retro-aza-Michael reaction triggered by dilution but, in some cases, hints were detected of concurrent hydrolytic degradation. Most PAAs were stable at pH 4.0; all degraded at pH 7.0 and 9.0. Initially, the degradation rate was faster at pH 9.0 than at pH 7.0, but the percent degradation after 97 days was mostly lower. In most cases, at pH 7.0 the degradation followed first order kinetics. The degradation rates mainly depended on the basicity of the amine monomers. More basic amines acted as better leaving groups.

Hydrogen Bonding in a l-Glutamine-Based Polyamidoamino Acid and its pH-Dependent Self-Ordered Coil Conformation.

This paper reports on synthesis, acid-base properties, and self-structuring in water of a chiral polyamidoamino acid, M-l-Gln, obtained from the polyaddition of N,N'-methylenebisacrylamide with l-glutamine, with the potential of establishing hydrogen bonds through its prim-amide pendants. The M-l-Gln showed pH-responsive circular dichroism spectra, revealing ordered conformations. Structuring was nearly insensitive to ionic strength but sensitive to denaturing agents. The NMR diffusion studies were consistent with a population of unimolecular nanoparticles thus excluding aggregation. The M-l-Gln had the highest molecular weight and hydrodynamic radius among all polyamidoamino acids described. Possibly, transient hydrogen bonds between l-glutamine molecules and M-l-Gln growing chains facilitated the polyaddition reaction. Theoretical modeling showed that M-l-Gln assumed pH-dependent self-ordered coil conformations with main chain transoid arrangements reminiscent of the protein hairpin motif owing to intramolecular dipole moments and hydrogen bonds. The latter were most numerous at the isoelectric point (pH 4.5), where they mainly involved even topologically distant main chain amide N-H and side chain amide C=O brought to proximity by structuring. Hydrogen bonds at pH 4.5 were also suggested by variable temperature NMR. The 2D NOESY experiments at pH 4.5 confirmed the formation of compact structures through the analysis of the main chain/side chain hydrogen contacts, in line with MD simulations.

Extra-Small Gold Nanospheres Decorated With a Thiol Functionalized Biodegradable and Biocompatible Linear Polyamidoamine as Nanovectors of Anticancer Molecules.

Gold nanoparticles are elective candidate for cancer therapy. Current efforts are devoted to developing innovative methods for their synthesis. Besides, understanding their interaction with cells have become increasingly important for their clinical application. This work aims to describe a simple approach for the synthesis of extra-small gold nanoparticles for breast cancer therapy. In brief, a biocompatible and biodegradable polyamidoamine (named AGMA1-SH), bearing 20%, on a molar basis, thiol-functionalized repeat units, is employed to stabilize and coat extra-small gold nanospheres of different sizes (2.5, 3.5, and 5 nm in gold core), and to generate a nanoplatform for the link with Trastuzumab monoclonal antibody for HER2-positive breast cancer targeting. Dynamic light scattering, transmission electron microscopy, ultraviolet visible spectroscopy, X-ray powder diffraction, circular dichroism, protein quantification assays are used for the characterization. The targeting properties of the nanosystems are explored to achieve enhanced and selective uptake of AGMA1-SH-gold nanoparticles by in vitro studies against HER-2 overexpressing cells, SKBR-3 and compared to HER-2 low expressing cells, MCF-7, and normal fibroblast cell line, NIH-3T3. In vitro physicochemical characterization demonstrates that gold nanoparticles modified with AGMA1-SH are more stable in aqueous solution than the unmodified ones. Additionally, the greater gold nanoparticles size (5-nm) is associated with a higher stability and conjugation efficiency with Trastuzumab, which retains its folding and anticancer activity after the conjugation. In particular, the larger Trastuzumab functionalized nanoparticles displays the highest efficacy (via the pro-apoptotic protein increase, anti-apoptotic components decrease, survival-proliferation pathways downregulation) and internalization (via the activation of the classical clathrin-mediated endocytosis) in HER-2 overexpressing SKBR-3 cells, without eliciting significant effects on the other cell lines. The use of biocompatible AGMA1-SH for producing covalently stabilized gold nanoparticles to achieve selective targeting, cytotoxicity and uptake is completely novel, offering an important advancement for developing new anticancer conjugated-gold nanoparticles.

Tricarbonyl-rhenium complexes of a thiol-functionalized amphoteric poly(amidoamine).

An amphoteric thiol-functionalized poly(amidoamine) nicknamed ISA23SH(10%) was synthesized. Rhenium complexes 1 and 2, containing 0.5 and 0.8 equiv of rhenium, respectively, were easily obtained by reacting ISA23SH(10%) with [Re(CO)(3)(H(2)O)(3)](CF(3)SO(3)) in aqueous solution at pH 5.5. Both ISA23SH(10%), and its rhenium complexes were soluble in water under physiological conditions. The resultant solutions were stable, even in the presence of cysteine. Rhenium chelation occurred through the S and N atoms of the cysteamine moiety, as demonstrated by (1)H, (13)C, and (15)N NMR spectroscopy. The diffusion coefficients and the hydrodynamic radii of ISA23SH(10%) and complex 1 were determined by pulsed gradient spin echo (PGSE) NMR experiments. The radius of the rhenium complexes 1 and 2 was always slightly larger than that of the parent polymer. TEM analysis showed that both complexes form spherical nanoparticles with narrow size distributions. Consistent results were obtained by dynamic light scattering. The observed sizes were in good agreement with those evaluated by PGSE. Preliminary in vitro and in vivo biological studies have been performed on complexes 1 and 2 as well as on the parent ISA23SH(10%). Neither hemolytic activity of the two rhenium complexes and the parent polymer, up to a concentration of 5 mg/mL, nor cytotoxic effects were observed on Hela cell after 48 h at a concentration of 100 ng/mL. In vivo toxicological tests showed that ISA23SH(10%) is highly biocompatible, with a maximum tolerated dose (MTD) of 500 mg/kg. No toxic side effects were apparent after the intravenous injection in mice of the two rhenium complexes in doses up to 20 mg/kg.

Controlled Synthesis of Linear Polyamidoamino Acids.

Polyamidoamino acids (PAACs) are synthetic polymers prepared by the polyaddition of bisacrylamides with natural α-amino acids, which in the process maintain both their chirality and their amphoteric nature. This polymerization process is slow, but has the merits of taking place in water and of neither involving protection/de-protection steps nor releasing by-products. However, it leads to polydisperse polymers and, using α-amino acids mixtures, random copolymers. This paper presents a step-by-step polyaddition process leading to homo- and copolymeric PAACs with controlled sequences and controlled molecular weights. It exploits the much different rates of the two Michael addition steps of NH2 of α-amino acids with acrylamides, and the low solubility in organic solvents of the α-amino acid addition products. As a proof of principle, the controlled synthesis of the PAAC from l-arginine and N,N'-methylenebisacrylamide was performed up to a monodisperse product with 11 monomeric units and molecular weight 1840. This synthetic procedure was also tested with l-alanine. All intermediates were isolated and characterized. Noticeably, all of them were α,ω-difunctionalized with either acrylamides or sec-amines and were, in fact, building blocks with potential for preparing complex macromolecular architectures. In a first instance, copolymers with controlled sequences of amidoamine- and amidoamino acid units were prepared.

d-, l- and d,l-Tryptophan-Based Polyamidoamino Acids: pH-Dependent Structuring and Fluorescent Properties.

Chiral polyamidoamino acids were obtained by polyaddition of N,N'-methylenebisacrylamide with d-, d,l- and l-tryptophan (M-d-Trp, M-d,l-Trp and M-l-Trp). l-tryptophan/glycine copolymers, M-G-l-Trp5, M-G-l-Trp10, M-G-l-Trp20 and M-G-l-Trp40, were prepared from l-tryptophan/glycine mixtures. These polymers were amphoteric, with acid-base properties similar to those of the parent amino acids. The l-tryptophan/glycine copolymers with high glycine content were water soluble in the pH range 2-12. M-G-l-Trp40 showed a solubility gap centred at pH 4.5 and all tryptophan homopolymers were soluble only at pH > 7. Dynamic light scattering measurements performed in their solubility ranges, namely 2-11 M-G-l-Trp5, M-G-l-Trp10 and M-G-l-Trp20 and 7-11 for M-G-l-Trp40, M-d-Trp, M-l-Trp and M-d,l-Trp, showed that the size of all samples did not significantly vary with pH. Both M-l-Trp and M-G-l-Trp copolymers showed pH-dependent circular dichroism spectra in the wavelength interval 200⁻280 nm, revealing structuring. All samples were fluorescent. Their emission spectra were unstructured and, if normalized for their tryptophan content, almost superimposable at the same pH, providing evidence that only tryptophan governed the photoluminescence properties. Changing pH induced in all cases a slight shift of the emission wavelength maximum ascribed to the modification of the microenvironment surrounding the indole ring induced by different protonation degrees.

Self-Structuring in Water of Polyamidoamino Acids with Hydrophobic Side Chains Deriving from Natural α-Amino Acids.

This paper reports on synthesis, acid-base properties and self-structuring in water of chiral polyamidoamino acids (PAACs) obtained by polyaddition of N,N'-methylenebisacrylamide with l-alanine, l-valine and l-leucine (M-l-Ala, M-l-Val, M-l-Leu) with potential for selective interactions with biomolecules. The polymers maintained the acid-base properties of amino acids. In water, the circular dichroism spectra of PAACs revealed pH-dependent structuring in the range 3⁻11 and in the wavelength interval 200⁻280 nm. Taking as reference the values at pH 3, the differential molar ellipticities were plotted in the pH interval 3⁻11. Sigmoidal curves were obtained presenting inflection points at pH 8.1, 6.8 and 7.3 for M-l-Ala, M-l-Val and M-l-Leu, respectively, corresponding to the amine half-ionization. Theoretical modeling showed that PAACs assumed stable folded conformations. Intramolecular interactions led to transoid arrangements of the main chain reminiscent of protein hairpin motif. Oligomers with ten repeat units had simulated gyration radii consistent with the hydrodynamic radii obtained by dynamic light scattering.