Metal-Organic Framework-Supported Mono Bipyridyl-Iron Hydroxyl Catalyst for Selective Benzene Hydroxylation into Phenol.

Direct hydroxylation of benzene to phenol is more appealing in the industry for the economic and environmentally friendly phenol synthesis than the conventional cumene process. We have developed a UiO-metal-organic framework (MOF)-supported mono bipyridyl-Iron(II) hydroxyl catalyst [bpy-UiO-Fe(OH)2] for the selective benzene hydroxylation into phenol using H2O2 as the oxidant. The heterogeneous bpy-UiO-Fe(OH)2 catalyst showed high activity and remarkable phenol selectivity of 99%, giving the phenol mass-specific activity up to 1261 mmolPhOHgFe-1 h-1 at 60 °C. Bpy-UiO-Fe(OH)2 is significantly more active and selective than its homogeneous counterpart, bipyridine-Fe(OH)2. This enhanced catalytic activity of bpy-UiO-Fe(OH)2 over its homogeneous control is attributed to the active site isolation of the bpy-Fe(OH)2 moiety by the solid MOF that prevents intermolecular decomposition. Moreover, the exceptional selectivity of bpy-UiO-Fe(OH)2 in benzene to phenol conversion is originated via shape-selective catalysis, where the confined reaction space within the porous UiO-MOF prevents the formation of larger overoxidized products such as hydroquinone or benzoquinone, leading to the formation of only smaller-sized phenol after monohydroxylation of benzene. Spectroscopic and controlled experiments and theoretical calculations elucidated the reaction pathway, in which the in situ generated •OH radical mediated by bpy-UiO-FeII(OH)2 is the key species for benzene hydroxylation. This work underscores the significance of MOF-supported earth-abundant metal catalysts for sustainable production of fine chemicals.

Selective Methane Oxidation to Acetic Acid Using Molecular Oxygen over a Mono-Copper Hydroxyl Catalyst.

Acetic acid is an industrially important chemical, produced mainly via carbonylation of methanol using precious metal-based homogeneous catalysts. As a low-cost feedstock, methane is commercially transformed to acetic acid via a multistep process involving energy-intensive methane steam reforming, methanol synthesis, and, subsequently, methanol carbonylation. Here, we report a direct single-step conversion of methane to acetic acid using molecular oxygen (O2) as the oxidant under mild conditions over a mono-copper hydroxyl site confined in a porous cerium metal-organic framework (MOF), Ce-UiO-Cu(OH). The Ce-UiO MOF-supported single-site copper hydroxyl catalyst gave exceptionally high acetic acid productivity of 335 mmolgcat-1 in 96% selectivity with a Cu TON up to 400 at 115 °C in water. Our spectroscopic and theoretical studies and controlled experiments reveal that the conversion of methane to acetic acid occurs via oxidative carbonylation, where methane is first activated at the copper hydroxyl site via σ-bond metathesis to afford Cu-methyl species, followed by carbonylation with in situ-generated carbon monoxide and subsequent hydrolysis by water. This work may guide the rational design of heterogeneous abundant metal catalysts for the activation and conversion of methane to acetic acid and other valuable chemicals under mild and environmentally friendly reaction conditions.

Tranexamic acid (class I drug) reduced and capped gold nanoparticles as a potential hemostatic agent with enhanced performance.

External hemostatic agents play a crucial role in stabilizing an impaired process during pathological conditions. The idea is to stabilize thein vivosystem as soon as possible. This study uses a class I hemostatic drug tranexamic acid as a reducing and capping agent for synthesizing the gold nanoparticles (Tr-AuNPs). Being the synthetic analogue of lysine and a biologically inspired alkylamine molecule, the chemistry can be fine-tuned for stable material that can simultaneously target the intrinsic and extrinsic hemostatic pathway, making it promising for hemostatic applications. The Tr-AuNPs of hydrodynamic diameter ∼46 nm were synthesized and evaluated physio-chemically using various analytical techniques wherein they showed hemocompatibility and increased thrombus weight compared to the native drug. The decrease in prothrombin time (PT) and international normalized ratio supported by the dynamic thromboelastography (TEG) study indicates the prepared nano-conjugate's potential in reducing time for attaining hemostasis as compared to the native tranexamic acid drug. At a 9µg ml-1concentration, Tr-AuNPs had a procoagulant effect, shown by decreased reaction time (R) and coagulation time (K) with improvedαangle and MA. There was a significant increase in the rate of coagulationin vivoby Tr-AuNPs, i.e. (52 s) compared to the native tranexamic acid (360 s). Radiolabelling studies ascertained thein vivobiocompatibility (non-invasive distribution, residence, clearance, and stability) of the Tr-AuNPs. The short-term toxicity studies were conducted to establish a proof of concept for the biomedical application of the material. The results highlighted the use of biologically alkyl amine molecules as capping and reducing agents for the synthesis of nanoparticles, which have shown a synergistic effect on the coagulation cascade while holding the potential for also acting as potential theranostic agents.

Chemoselective and Tandem Reduction of Arenes Using a Metal-Organic Framework-Supported Single-Site Cobalt Catalyst.

The development of heterogeneous, chemoselective, and tandem catalytic systems using abundant metals is vital for the sustainable synthesis of fine and commodity chemicals. We report a robust and recyclable single-site cobalt-hydride catalyst based on a porous aluminum metal-organic framework (DUT-5 MOF) for chemoselective hydrogenation of arenes. The DUT-5 node-supported cobalt(II) hydride (DUT-5-CoH) is a versatile solid catalyst for chemoselective hydrogenation of a range of nonpolar and polar arenes, including heteroarenes such as pyridines, quinolines, isoquinolines, indoles, and furans to afford cycloalkanes and saturated heterocycles in excellent yields. DUT-5-CoH exhibited excellent functional group tolerance and could be reusable at least five times without decreased activity. The same MOF-Co catalyst was also efficient for tandem hydrogenation-hydrodeoxygenation of aryl carbonyl compounds, including biomass-derived platform molecules such as furfural and hydroxymethylfurfural to cycloalkanes. In the case of hydrogenation of cumene, our spectroscopic, kinetic, and density functional theory (DFT) studies suggest the insertion of a trisubstituted alkene intermediate into the Co-H bond occurring in the turnover limiting step. Our work highlights the potential of MOF-supported single-site base-metal catalysts for sustainable and environment-friendly industrial production of chemicals and biofuels.

Metal-Organic Framework-Confined Single-Site Base-Metal Catalyst for Chemoselective Hydrodeoxygenation of Carbonyls and Alcohols.

Chemoselective deoxygenation of carbonyls and alcohols using hydrogen by heterogeneous base-metal catalysts is crucial for the sustainable production of fine chemicals and biofuels. We report an aluminum metal-organic framework (DUT-5) node support cobalt(II) hydride, which is a highly chemoselective and recyclable heterogeneous catalyst for deoxygenation of a range of aromatic and aliphatic ketones, aldehydes, and primary and secondary alcohols, including biomass-derived substrates under 1 bar H2. The single-site cobalt catalyst (DUT-5-CoH) was easily prepared by postsynthetic metalation of the secondary building units (SBUs) of DUT-5 with CoCl2 followed by the reaction of NaEt3BH. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy (XANES) indicated the presence of CoII and AlIII centers in DUT-5-CoH and DUT-5-Co after catalysis. The coordination environment of the cobalt center of DUT-5-Co before and after catalysis was established by extended X-ray fine structure spectroscopy (EXAFS) and density functional theory. The kinetic and computational data suggest reversible carbonyl coordination to cobalt preceding the turnover-limiting step, which involves 1,2-insertion of the coordinated carbonyl into the cobalt-hydride bond. The unique coordination environment of the cobalt ion ligated by oxo-nodes within the porous framework and the rate independency on the pressure of H2 allow the deoxygenation reactions chemoselectively under ambient hydrogen pressure.

Amino Acid-Functionalized Metal-Organic Frameworks for Asymmetric Base-Metal Catalysis.

We report a strategy to develop heterogeneous single-site enantioselective catalysts based on naturally occurring amino acids and earth-abundant metals for eco-friendly asymmetric catalysis. The grafting of amino acids within the pores of a metal-organic framework (MOF), followed by post-synthetic metalation with iron precursor, affords highly active and enantioselective (>99 % ee for 10 examples) catalysts for hydrosilylation and hydroboration of carbonyl compounds. Impressively, the MOF-Fe catalyst displayed high turnover numbers of up to 10 000 and was recycled and reused more than 15 times without diminishing the enantioselectivity. MOF-Fe displayed much higher activity and enantioselectivity than its homogeneous control catalyst, likely due to the formation of robust single-site catalyst in the MOF through site-isolation.

Single-Site Cobalt-Catalyst Ligated with Pyridylimine-Functionalized Metal-Organic Frameworks for Arene and Benzylic Borylation.

We report a highly active single-site heterogeneous cobalt-catalyst based on a porous and robust pyridylimine-functionalized metal-organic frameworks (pyrim-MOF) for chemoselective borylation of arene and benzylic C-H bonds. The pyrim-MOF having UiO-68 topology, constructed from zirconium-cluster secondary building units and pyridylimine-functionalized dicarboxylate bridging linkers, was metalated with CoCl2 followed by treatment of NaEt3BH to give the cobalt-functionalized MOF-catalyst (pyrim-MOF-Co). Pyrim-MOF-Co has a broad substrate scope, allowing the C-H borylation of halogen-, alkoxy-, alkyl-substituted arenes as well as heterocyclic ring systems using B2pin2 or HBpin (pin = pinacolate) as the borylating agent to afford the corresponding arene- or alkyl-boronate esters in good yields. Pyrim-MOF-Co gave a turnover number (TON) of up to 2500 and could be recycled and reused at least 9 times. Pyrim-MOF-Co was also significantly more robust and active than its homogeneous control, highlighting the beneficial effect of active-site isolation within the MOF framework that prevents intermolecular decomposition. The experimental and computational studies suggested (pyrim•-)CoI(THF) as the active catalytic species within the MOF, which undergoes a mechanistic pathway of oxidative addition, turnover limiting σ-bond metathesis, followed by reductive elimination to afford the boronate ester.

Single-Site Cobalt Catalysts at New Zr12(µ3-O)8(µ3-OH)8(µ2-OH)6 Metal-Organic Framework Nodes for Highly Active Hydrogenation of Nitroarenes, Nitriles, and Isocyanides.

We report here the synthesis of a robust and porous metal-organic framework (MOF), Zr12-TPDC, constructed from triphenyldicarboxylic acid (H2TPDC) and an unprecedented Zr12 secondary building unit (SBU): Zr12(µ3-O)8(µ3-OH)8(µ2-OH)6. The Zr12-SBU can be viewed as an inorganic node dimerized from two commonly observed Zr6 clusters via six µ2-OH groups. The metalation of Zr12-TPDC SBUs with CoCl2 followed by treatment with NaBEt3H afforded a highly active and reusable solid Zr12-TPDC-Co catalyst for the hydrogenation of nitroarenes, nitriles, and isocyanides to corresponding amines with excellent activity and selectivity. This work highlights the opportunity in designing novel MOF-supported single-site solid catalysts by tuning the electronic and steric properties of the SBUs.

Metal-Organic Frameworks Stabilize Solution-Inaccessible Cobalt Catalysts for Highly Efficient Broad-Scope Organic Transformations.

New and active earth-abundant metal catalysts are critically needed to replace precious metal-based catalysts for sustainable production of commodity and fine chemicals. We report here the design of highly robust, active, and reusable cobalt-bipyridine- and cobalt-phenanthroline-based metal-organic framework (MOF) catalysts for alkene hydrogenation and hydroboration, aldehyde/ketone hydroboration, and arene C-H borylation. In alkene hydrogenation, the MOF catalysts tolerated a variety of functional groups and displayed unprecedentedly high turnover numbers of ∼2.5 × 10(6) and turnover frequencies of ∼1.1 × 10(5) h(-1). Structural, computational, and spectroscopic studies show that site isolation of the highly reactive (bpy)Co(THF)2 species in the MOFs prevents intermolecular deactivation and stabilizes solution-inaccessible catalysts for broad-scope organic transformations. Computational, spectroscopic, and kinetic evidence further support a hitherto unknown (bpy(•-))Co(I)(THF)2 ground state that coordinates to alkene and dihydrogen and then undergoing σ-complex-assisted metathesis to form (bpy)Co(alkyl)(H). Reductive elimination of alkane followed by alkene binding completes the catalytic cycle. MOFs thus provide a novel platform for discovering new base-metal molecular catalysts and exhibit enormous potential in sustainable chemical catalysis.

Metal-Organic Framework Nodes Support Single-Site Magnesium-Alkyl Catalysts for Hydroboration and Hydroamination Reactions.

Here we present the first example of a single-site main group catalyst stabilized by a metal-organic framework (MOF) for organic transformations. The straightforward metalation of the secondary building units of a Zr-MOF with Me2Mg affords a highly active and reusable solid catalyst for hydroboration of carbonyls and imines and for hydroamination of aminopentenes. Impressively, the Mg-functionalized MOF displayed very high turnover numbers of up to 8.4 × 10(4) for ketone hydroboration and could be reused more than 10 times. MOFs can thus be used to develop novel main group solid catalysts for sustainable chemical synthesis.

Single-Site Cobalt Catalysts at New Zr8(µ2-O)8(µ2-OH)4 Metal-Organic Framework Nodes for Highly Active Hydrogenation of Alkenes, Imines, Carbonyls, and Heterocycles.

We report here the synthesis of robust and porous metal-organic frameworks (MOFs), M-MTBC (M = Zr or Hf), constructed from the tetrahedral linker methane-tetrakis(p-biphenylcarboxylate) (MTBC) and two types of secondary building units (SBUs): cubic M8(µ2-O)8(µ2-OH)4 and octahedral M6(µ3-O)4(µ3-OH)4. While the M6-SBU is isostructural with the 12-connected octahedral SBUs of UiO-type MOFs, the M8-SBU is composed of eight M(IV) ions in a cubic fashion linked by eight µ2-oxo and four µ2-OH groups. The metalation of Zr-MTBC SBUs with CoCl2, followed by treatment with NaBEt3H, afforded highly active and reusable solid Zr-MTBC-CoH catalysts for the hydrogenation of alkenes, imines, carbonyls, and heterocycles. Zr-MTBC-CoH was impressively tolerant of a range of functional groups and displayed high activity in the hydrogenation of tri- and tetra-substituted alkenes with TON > 8000 for the hydrogenation of 2,3-dimethyl-2-butene. Our structural and spectroscopic studies show that site isolation of and open environments around the cobalt-hydride catalytic species at Zr8-SBUs are responsible for high catalytic activity in the hydrogenation of a wide range of challenging substrates. MOFs thus provide a novel platform for discovering and studying new single-site base-metal solid catalysts with enormous potential for sustainable chemical synthesis.

Zirconium-catalyzed desymmetrization of aminodialkenes and aminodialkynes through enantioselective hydroamination.

The catalytic addition of alkenes and amines (hydroamination) typically provides α- or ß-amino stereocenters directly through C-N or C-H bond formation. Alternatively, desymmetrization reactions of symmetrical aminodialkenes or aminodialkynes provide access to stereogenic centers with the position controlled by the substrate's structure. In the present study of an enantioselective zirconium-catalyzed hydroamination, stereocenters resulting from C-N bond formation and desymmetrization of a prochiral quaternary center are independently controlled by the catalyst and reaction conditions. Using a single catalyst, the method provides selective access to either diastereomer of optically enriched five-, six-, and seven-membered cyclic amines from aminodialkenes and enantioselective synthesis of five-, six-, and seven-membered cyclic imines from aminodialkynes. Experiments on hydroamination of aminodialkenes testing the effects of the catalyst:substrate ratio, the absolute concentration of the catalyst, and the absolute initial concentration of the primary amine substrate show that the latter parameter strongly influences the stereoselectivity of the desymmetrization process, whereas the absolute configuration of the α-amino stereocenter generated by C-N bond formation is not affected by these parameters. Interestingly, isotopic substitution (H2NR vs D2NR) of the substrate enhances the stereoselectivity of the enantioselective and diastereoselective processes in aminodialkene cyclization and the peripheral stereocenter in aminodialkyne desymmetrization/cyclization.

Bipyridine- and phenanthroline-based metal-organic frameworks for highly efficient and tandem catalytic organic transformations via directed C-H activation.

We report here the synthesis of a series of robust and porous bipyridyl- and phenanthryl-based metal-organic frameworks (MOFs) of UiO topology (BPV-MOF, mBPV-MOF, and mPT-MOF) and their postsynthetic metalation to afford highly active single-site solid catalysts. While BPV-MOF was constructed from only bipyridyl-functionalized dicarboxylate linker, both mBPV- and mPT-MOF were built with a mixture of bipyridyl- or phenanthryl-functionalized and unfunctionalized dicarboxylate linkers. The postsynthetic metalation of these MOFs with [Ir(COD)(OMe)]2 provided Ir-functionalized MOFs (BPV-MOF-Ir, mBPV-MOF-Ir, and mPT-MOF-Ir), which are highly active catalysts for tandem hydrosilylation of aryl ketones and aldehydes followed by dehydrogenative ortho-silylation of benzylicsilyl ethers as well as C-H borylation of arenes using B2pin2. Both mBPV-MOF-Ir and mPT-MOF-Ir catalysts displayed superior activities compared to BPV-MOF-Ir due to the presence of larger open channels in the mixed-linker MOFs. Impressively, mBPV-MOF-Ir exhibited high TONs of up to 17,000 for C-H borylation reactions and was recycled more than 15 times. The mPT-MOF-Ir system is also active in catalyzing tandem dehydrosilylation/dehydrogenative cyclization of N-methylbenzyl amines to azasilolanes in the absence of a hydrogen acceptor. Importantly, MOF-Ir catalysts are significantly more active (up to 95 times) and stable than their homogeneous counterparts for all three reactions, strongly supporting the beneficial effects of active site isolation within MOFs. This work illustrates the ability to increase MOF open channel sizes by using the mixed linker approach and shows the enormous potential of developing highly active and robust single-site solid catalysts based on MOFs containing nitrogen-donor ligands for important organic transformations.

Postsynthetic metalation of bipyridyl-containing metal-organic frameworks for highly efficient catalytic organic transformations.

We have designed highly stable and recyclable single-site solid catalysts via postsynthetic metalation of the 2,2'-bipyridyl-derived metal-organic framework (MOF) of the UiO structure (bpy-UiO). The Ir-functionalized MOF (bpy-UiO-Ir) is a highly active catalyst for both borylation of aromatic C-H bonds using B2(pin)2 (pin = pinacolate) and ortho-silylation of benzylicsilyl ethers; the ortho-silylation activity of the bpy-UiO-Ir is at least 3 orders of magnitude higher than that of the homogeneous control. The Pd-functionalized MOF (bpy-UiO-Pd) catalyzes the dehydrogenation of substituted cyclohexenones to afford phenol derivatives with oxygen as the oxidant. Most impressively, the bpy-UiO-Ir was recycled and reused 20 times for the borylation reaction without loss of catalytic activity or MOF crystallinity. This work highlights the opportunity in designing highly stable and active catalysts based on MOFs containing nitrogen donor ligands for important organic transformations.

Salicylaldimine-based metal-organic framework enabling highly active olefin hydrogenation with iron and cobalt catalysts.

A robust and porous Zr metal-organic framework, sal-MOF, of UiO topology was synthesized using a salicylaldimine (sal)-derived dicarboxylate bridging ligand. Postsynthetic metalation of sal-MOF with iron(II) or cobalt(II) chloride followed by treatment with NaBEt3H in THF resulted in Fe- and Co-functionalized MOFs (sal-M-MOF, M = Fe, Co) which are highly active solid catalysts for alkene hydrogenation. Impressively, sal-Fe-MOF displayed very high turnover numbers of up to 145000 and was recycled and reused more than 15 times. This work highlights the unique opportunity of developing MOF-based earth-abundant catalysts for sustainable chemical synthesis.

Selective Reduction of Nitro Compounds by Organosilanes Catalyzed by a Zirconium Metal-Organic Framework Supported Salicylaldimine-Cobalt(II) Complex.

Reducing nitro compounds to amines is a fundamental reaction in producing valuable chemicals in industry. Herein, the synthesis and characterization of a zirconium metal-organic framework-supported salicylaldimine-cobalt(II) chloride (salim-UiO-CoCl) and its application in catalytic reduction of nitro compounds are reported. Salim-UiO-Co displayed excellent catalytic activity in chemoselective reduction of aromatic and aliphatic nitro compounds to the corresponding amines in the presence of phenylsilane as a reducing agent under mild reaction conditions. Salim-UiO-Co catalyzed nitro reduction had a broad substrate scope with excellent tolerance to diverse functional groups, including easily reducible ones such as aldehyde, keto, nitrile, and alkene. Salim-UiO-Co MOF catalyst could be recycled and reused at least 14 times without noticeable losing activity and selectivity. Density functional theory (DFT) studies along with spectroscopic analysis were employed to get into a comprehensive investigation of the reaction mechanism. This work underscores the significance of MOF-supported single-site base-metal catalysts for the sustainable and cost-effective synthesis of chemical feedstocks and fine chemicals.

Selective monoborylation of methane by metal-organic framework confined mononuclear pyridylimine-iridium(I) hydride.

Chemoselective monoborylation of methane in high yield is a grand challenge. We have developed a metal-organic framework confined pyridylimine-iridium hydride catalyst, which is efficient in methane C-H borylation using bis(pinacolato)diboron to afford methyl boronic acid pinacol ester in 98% GC-yield at 130 °C with a TON of 196. Mechanistic investigation suggests the oxidative addition of methane to IrIII(Bpin)2(H) species to form IrV(Bpin)2(CH3)(H)2 as the turnover limiting step.

Synthesis and evaluation of curcumin reduced and capped gold nanoparticles as a green diagnostic probe with therapeutic potential.

Curcumin, a compound in turmeric, shows promise for its anti-cancer properties. In this study, we successfully synthesised curcumin-reduced and capped gold nanoparticles. Most evaluations have been limited to in-vitro studies for these nanoparticles; our study takes a step further by highlighting the in-vivo assessment of these curcumin-reduced and capped gold nanoparticles (GNPCs) using non-invasive imaging (SPECT and optical) and possible therapeutic potential. The GNPCs showed an average hydrodynamic diameter of 58 nm and a PDI of 0.336. The synthesised and fully characterised GNPCs showed ex-vivo hemolysis value of ≤ 1.74 % and serum stability of ≥ 95 % over 24 h. Using in-vivo non-invasive (SPECT and optical Imaging), prolonged circulation and enhanced bioavailability of GNPCs were seen. The biodistribution studies after radiolabelling GNPCs with 99 mTc complemented the optical imaging. The SPECT images showed higher uptake of the GNPCs at the tumour site, viz the contralateral muscle and the native Curcumin, resulting in a high target-to-non-target ratio that differentiated the tumour sufficiently and enhanced the diagnostics. Other organs also accumulate radiolabeled GNPCs in systemic circulation; bio dosimetry is performed. It was found that the dose received by the different organs was safe for use, and the in-vivo toxicity studies in rats indicated negligible toxicity over 30 days. The tumour growth was also reduced in mice models treated with GNPCs compared to the control. These significant findings demonstrate that GNPC shows synergistic activity in vivo, indicating its ability as a green diagnostic probe that has the potential for therapy.

Highly enantioselective zirconium-catalyzed cyclization of aminoalkenes.

Aminoalkenes are catalytically cyclized in the presence of cyclopentadienylbis(oxazolinyl)borato group 4 complexes {PhB(C5H4)(Ox(R))2}M(NMe2)2 (M = Ti, Zr, Hf; Ox(R) = 4,4-dimethyl-2-oxazoline, 4S-isopropyl-5,5-dimethyl-2-oxazoline, 4S-tert-butyl-2-oxazoline) at room temperature and below, affording five-, six-, and seven-membered N-heterocyclic amines with enantiomeric excesses of >90% in many cases and up to 99%. Mechanistic investigations of this highly selective system employed synthetic tests, kinetics, and stereochemistry. Secondary aminopentene cyclizations require a primary amine (1-2 equiv vs catalyst). Aminoalkenes are unchanged in the presence of a zirconium monoamido complex {PhB(C5H4)(Ox(4S-iPr,Me2))2}Zr(NMe2)Cl or a cyclopentadienylmono(oxazolinyl)borato zirconium diamide {Ph2B(C5H4)(Ox(4S-iPr,Me2))}Zr(NMe2)2. Plots of initial rate versus [substrate] show a rate dependence that evolves from first-order at low concentration to zero-order at high concentration, and this is consistent with a reversible substrate-catalyst interaction preceding an irreversible step. Primary kinetic isotope effects from substrate conversion measurements (k'obs((H))/k'obs((D)) = 3.3 ± 0.3) and from initial rate analysis (k2((H))/k2((D)) = 2.3 ± 0.4) indicate that a N-H bond is broken in the turnover-limiting and irreversible step of the catalytic cycle. Asymmetric hydroamination/cyclization of N-deutero-aminoalkenes provides products with higher optical purities than obtained with N-proteo-aminoalkenes. Transition state theory, applied to the rate constant k2 that characterizes the irreversible step, provides activation parameters consistent with a highly organized transition state (ΔS(++) = -43(7) cal·mol(-1) K(-1)) and a remarkably low enthalpic barrier (ΔH(++) = 6.7(2) kcal·mol(-1)). A six-centered, concerted transition state for C-N and C-H bond formation and N-H bond cleavage involving two amidoalkene ligands is proposed as most consistent with the current data.

A supported pyridylimine-cobalt catalyst for N-formylation of amines using CO2.

N-Formylation of amines with CO2 as a cheap and non-toxic C1-feedstock and hydrosilane reducing agent is a practical and environment friendly method to synthesize formamides. This study describes an efficient and chemoselective mono-N-formylation of amines using CO2 and phenylsilane under mild conditions using a porous metal-organic framework (MOF)-supported single-site cobalt catalyst (pyrim-UiO-Co). The pyrim-UiO-Co MOF has a UiO-topology, and its organic linkers bear a pyridylimine ligated Co catalytic moiety. A wide range of aliphatic and aromatic amines are transformed into desired N-formamides in moderate to excellent yields under 1-5 bar CO2. Pyrim-UiO-Co is tolerant to various functional groups and could be recycled and reused at least 10 times. Mechanistic investigation using kinetic, spectroscopic and density functional theory studies suggests that the formylation of benzylamine proceeds sequentially via oxidative addition of PhSiH3 and CO2 insertion, followed by a turn-over limiting reaction with an amine. Our work highlights the importance of MOF-based Earth-abundant metal catalysts for the practical and eco-friendly synthesis of fine chemicals using cheap feedstocks.