Ultrafast excited state relaxation dynamics of pyran-based D-π-A systems: solvent polarity controls the triplet state.

The excited state relaxation dynamics of V-shaped D-π-A systems having 4H-pyranylidene appended barbituric acid as an acceptor and diphenylamine (TPAPBA) and diethyl amine (EAPBA) as donors were investigated using steady-state and time-resolved spectroscopy along with theoretical optimization. The steady-state photophysical characterization exhibited the bathochromic shift of the emission maximum (∼6400 cm-1) and large change in the dipole moment (∼24D) with an increase of solvent polarity, reflecting the occurrence of the intramolecular charge transfer state (ICT) in the excited state. The nanosecond and femtosecond transient absorption spectra of these derivatives in a non-polar solvent, toluene, reveal that the excited state relaxation pathway involving a local excited state (LE) decayed to ICT followed by the formation of a twisted ICT state by conformational relaxation, finally leading to the triplet state. The lack of observation of a triplet state in the polar solvent, acetonitrile, signifies that the relaxation dynamics of V-shaped triads in the excited state are influenced by the polarity of the solvent.

A Simple Live Cell Imaging "Turn-On" Fluorescence Probe for the Selective and Sensitive Detection of Aqueous Hg2+ Ions.

A simple, efficient, and reversible fluorescent sensor probe, PBA (2,6-dimethyl pyrone barbituric acid conjugate), comprised of a pro-aromatic donor conjugated with a barbituric acid, was developed for the detection of highly toxic mercuric ions. The probe showed high selectivity and "Turn-On" fluorescence response towards Hg2+ among various metal cations such as Na+, Mg2+, Ca2+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+, Ba2+, Hg2+, and Pb2+, in both homogeneous and microheterogeneous micelle medium sodium dodecyl sulphate (SDS). The binding stoichiometry, limit of detection (LOD), and binding constant for the PBA-Hg complex were determined. The mechanism of binding was ascertained using the N,N'-dimethylbarbituric acid conjugate of 2,6-dimethylpyran (PDMBA), where no binding interaction by deprotonation is possible. In the presence of cysteamine hydrochloride and trifluoroacetic acid (TFA), the complexation of Hg2+ with PBA was demonstrated to be reversible, indicating its potential for the development of reusable sensors. Moreover, the practical applicability of PBA in monitoring Hg2+ in living cells was also evaluated.

Micellar control of the photooxidation pathways of 10-methyl phenothiazine: electron versus energy transfer mechanisms.

10-Methyl phenothiazine (MPS) was chosen as a model compound to investigate the effects of compartmentalisation and of charged interfaces on the primary mechanisms involved in the phototoxic reactions related to phenothiazine drugs. Two most important pathways resulting from the interaction of the triplet excited state of MPS ((3)MPS*) with molecular oxygen ((3)O2) have to be considered: (i) energy transfer producing singlet oxygen ((1)O2) and (ii) electron transfer generating the superoxide anion (O2˙(-)) and the radical cation (MPS˙(+)). The quantum yields of (1)O2 production by MPS solubilized in the dispersed pseudo-phase of aqueous micellar systems were found to be similar to those determined in solvents of various polarities, regardless of the anionic or cationic nature of the surfactant (SDS or CTAC). However, micellar compartmentalisation and surfactant charge affect considerably both the sensitized and the self-sensitized photooxidation of MPS. The formation of 10-methyl phenothiazine sulfoxide (MPSO), produced by the reaction of MPS with (1)O2, proceeds at a higher rate in SDS micelles than in neat polar solvents. This result may be explained by the protonation of the zwitterionic intermediate Z (MPS(+)OO(-)) at the micellar interface to yield the corresponding cation C (MPS(+)OOH) that is stabilized in the negatively charged micelles and reacts much faster with MPS than Z to yield MPSO. The electron transfer reaction from (3)MPS* to O2 yielding MPS˙(+) and O2˙(-) is also enhanced in SDS micelles, as back electron transfer (BET) is prevented by ejection of O2˙(-) to the aqueous bulk phase and stabilization of MPS˙(+) in the anionic micelles. The size of the SDS micelles modulates the relative contribution of each pathway (formation of MPSO or MPS˙(+)) to the overall conversion of MPS to its oxidation products. Photooxidation of MPS in cationic micelles is a very slow process, as the formation of neither C nor MPS˙(+) is favoured in positively charged micelles.

Advances in CO2 utilization employing anisotropic nanomaterials as catalysts: a review.

Anisotropic nanomaterials are materials with structures and properties that vary depending on the direction in which they are measured. Unlike isotropic materials, which exhibit uniform physical properties in all directions, anisotropic materials have different mechanical, electrical, thermal, and optical properties in different directions. Examples of anisotropic nanomaterials include nanocubes, nanowires, nanorods, nanoprisms, nanostars, and so on. These materials have unique properties that make them useful in a variety of applications, such as electronics, energy storage, catalysis, and biomedical engineering. One of the key advantages of anisotropic nanomaterials is their high aspect ratio, which refers to the ratio of their length to their width, which can enhance their mechanical and electrical properties, making them suitable for use in nanocomposites and other nanoscale applications. However, the anisotropic nature of these materials also presents challenges in their synthesis and processing. For example, it can be difficult to align the nanostructures in a specific direction to impart modulation of a specific property. Despite these challenges, research into anisotropic nanomaterials continues to grow, and scientists are working to develop new synthesis methods and processing techniques to unlock their full potential. Utilization of carbon dioxide (CO2) as a renewable and sustainable source of carbon has been a topic of increasing interest due to its impact on reducing the level of greenhouse gas emissions. Anisotropic nanomaterials have been used to improve the efficiency of CO2 conversion into useful chemicals and fuels using a variety of processes such as photocatalysis, electrocatalysis, and thermocatalysis. More study is required to improve the usage of anisotropic nanomaterials for CO2 consumption and to scale up these technologies for industrial use. The unique properties of anisotropic nanomaterials, such as their high surface area, tunable morphology, and high activity, make them promising catalysts for CO2 utilization. This review article discusses briefly about various approaches towards the synthesis of anisotropic nanomaterials and their applications in CO2 utilization. The article also highlights the challenges and opportunities in this field and the future direction of research.

Directed morphology engineering of 2D MoS2 nanosheets to 1D nanoscrolls with enhanced hydrogen evolution and specific capacitance.

1D-molybdenum disulfide (MoS2) nanoscrolls displayed enhanced electrochemical properties compared to 2D-MoS2 nanosheet counterparts. Rolling of nanosheets is the main fabrication route to nanoscrolls. However, owing to the conflict between chemical stability and multiple bending, the morphology transition from nanosheets to nanoscrolls is quite challenging. Herein we describe a reversible morphology transition from nanosheets to nanoscrolls by utilizing non-covalent interactions between MoS2 nanosheets and phenothiazine based organic dye. Interestingly, nanoscrolls can easily be opened back into nanosheets by destroying the non-covalent interactions with organic solvents. The prepared nanoscrolls exhibited enhanced electrochemical properties than nanosheets. Compared to nanosheets, nanoscrolls exhibited comparatively lower overpotential with a Tafel slope of 141 mV dec-1 and high specific capacitance of 1868 F g-1. Hydrogen evolution by the Volmer-Heyrovsky mechanism being superior for the nanoscrolls is envisaged by the relatively increased availability of Hads sites at MoS2 edges induced by scrolling. Whereas the high specific capacitance value of nanoscrolls is ascribed to the enhanced electrical double-layer capacitance mediated charge storage, which arises due to the synergistic effect of both scrolled structure and the electron-rich phenothiazine-based dye.

Self sensitized photooxidation of N-methyl phenothiazine: acidity control of the competition between electron and energy transfer mechanisms.

The reaction pathways following electronic excitation of 10-methyl phenothiazine (MPS) in the presence of oxygen have been investigated as a contribution to establish the mechanisms involved in the phototoxic reactions related to phenothiazine drugs. In the context of previously published results, the pathways of oxidation via the radical cation and/or by reactive oxygen species, such as singlet oxygen and superoxide anion, are of particular interest. The effects of polarity of the medium as well as of proton donors on the different reaction pathways, in particular on the formation of reactive oxygen species and the intermediates of the oxidation of 10-methyl phenothiazine, have been investigated. No reaction was observed in non-polar solvents. In polar solvents, both self-sensitized and sensitized singlet oxygen generation lead to the oxidation of MPS and the production of 10-methyl phenothiazine sulfoxide (MPSO) most probably via a zwitterionic persulfoxide. During self-sensitized photooxidation of MPS in the presence of proton donors, such as carboxylic acids, the zwitterionic intermediate is protonated to the corresponding cation that in turn facilitates the reaction with a second molecule of MPS. In the presence of strong acids however, the formation of the radical cation of MPS and of the superoxide anion, by electron transfer from the triplet excited state of MPS to molecular oxygen, competes efficiently with singlet oxygen formation. In this case, the scavenging of the superoxide anion by protons to yield its conjugated acid (hydroperoxyl radical) and the subsequent disproportionation of the latter prevents back electron transfer.

Vacuum-ultraviolet photochemically initiated modification of polystyrene surfaces: morphological changes and mechanistic investigations.

Vacuum-ultraviolet (VUV) irradiation (lambda(exc): 172 +/- 12 nm) of polystyrene films in the presence of oxygen produced not only oxidatively functionalized surfaces, but generated also morphological changes. Whereas OH- and C=O-functionalized surfaces might be used for e.g. secondary functionalization, enhanced aggregation or printing, processes leading to morphological changes open new possibilities of microstructurization. Series of experiments made under different experimental conditions brought evidence of two different reaction pathways: introduction of OH- and C=O-groups at the polystyrene pathways is mainly due to the reaction of reactive oxygen species (hydroxyl radicals, atomic oxygen, ozone) produced in the gas phase between the VUV-radiation source and the substrate. However, oxidative fragmentation leading to morphological changes, oxidation products of low molecular weight and eventually to mineralization of the organic substrate is initiated by electronic excitation of the polymer leading to C-C-bond homolysis and to a complex oxidation manifold after trapping of the C-centred radicals by molecular oxygen. The pathways of oxidative functionalization or fragmentation could be differentiated by FTIR-ATR analysis of irradiated polystyrene surfaces before and after washing with acetonitrile and microscopic fluorescence analysis of the surfaces secondarily functionalized with the N,N,N-tridodecyl-triaza-triangulenium (TATA) cation. Ozonization of the polystyrene leads to oxidative functionalization of the polymer surface but cannot initiate the fragmentation of the polymer backbone. Oxidative fragmentation is initiated by electronic excitation of the polymer (contact-mode AFM analysis), and evidence of the generation of intermediate C-centred radicals is given e.g. by experiments in the absence of oxygen leading to cross-linking (solubility effects, optical microscopy, friction-mode AFM) and disproportionation (fluorescence).

Singlet oxygen in microporous silica xerogel: quantum yield and oxidation at the gas-solid interface.

The quantum yields of singlet oxygen ((1)O(2)) production (Phi(Delta)) and (1)O(2) lifetimes (tau(Delta)) at the gas-solid interface in silica gel material are determined. Different photosensitizers (PS) are encapsulated in parallelepipedic xerogel monoliths (PS-SG). PS were chosen according to their known photooxidation properties: 9,10-dicyanoanthracene (DCA), 9,10-anthraquinone (ANT), and a benzophenone derivative, 4-benzoyl benzoic acid (4BB). These experiments are mainly based on time-resolved (1)O(2) phosphorescence detection, and the obtained Phi(Delta) and tau(Delta) values are compared with those of a reference sensitizer for (1)O(2) production, 1H-phenalen-1-one (PN), included in the same xerogel. The trend between their ability to oxidize organic pollutants in the gas phase and their efficiency for (1)O(2) production is investigated through photooxidation experiments of a test pollutant dimethylsulfide (DMS). The Phi(Delta) value is high for DCA-SG relative to the PN reference, whereas it is slightly lower for 4BB-SG and for ANT-SG. Phi(Delta) is related to the production of sulfoxide and sulfone as the main oxidation products for DMS photosensitized oxidation. Additional mechanisms, leading to C--S bond cleaveage, appear to mainly occur for the less efficient singlet oxygen sensitizers 4BB-SG and ANT-SG.