GPS-Free Wireless Precise Positioning System for Automatic Flying and Landing Application of Shipborne Unmanned Aerial Vehicle.

This research is dedicated to developing an automatic landing system for shipborne unmanned aerial vehicles (UAVs) based on wireless precise positioning technology. The application scenario is practical for specific challenging and complex environmental conditions, such as the Global Positioning System (GPS) being disabled during wartime. The primary objective is to establish a precise and real-time dynamic wireless positioning system, ensuring that the UAV can autonomously land on the shipborne platform without relying on GPS. This work addresses several key aspects, including the implementation of an ultra-wideband (UWB) circuit module with a specific antenna design and RF front-end chip to enhance wireless signal reception. These modules play a crucial role in achieving accurate positioning, mitigating the limitations caused by GPS inaccuracy, thereby enhancing the overall performance and reception range of the system. Additionally, the study develops a wireless positioning algorithm to validate the effectiveness of automatic landing on the shipborne platform. The platform's wave vibration is considered to provide a realistic landing system for shipborne UAVs. The UWB modules are practically installed on the shipborne platform, and the UAV and the autonomous three-body vessel are tested simultaneously in the outdoor open water space to verify the functionality, precision, and adaptability of the proposed UAV landing system. Results demonstrate that the UAV can autonomously fly from 200 m, approach, and automatically land on the moving shipborne platform without relying on GPS.

Range-Extension Algorithms and Strategies for TDOA Ultra-Wideband Positioning System.

The Internet of Things (IoT) for smart industry requires the surveillance and management of people and objects. The ultra-wideband positioning system is an attractive solution for achieving centimeter-level accuracy in target location. While many studies have focused on improving the accuracy of the anchor coverage range, it is important to note that in practical applications, positioning areas are often limited and obstructed by furniture, shelves, pillars, or walls, which can restrict the placement of anchors. Furthermore, some positioning regions are located beyond anchor coverage, and a single group with few anchors may not be able to cover all rooms and aisles on a floor due to non-line-of-sight errors causing severe positioning errors. In this work, we propose a dynamic-reference anchor time difference of arrival (TDOA) compensation algorithm to enhance accuracy beyond anchor coverage by eliminating local minima of the TDOA loss function near anchors. We designed a multidimensional and multigroup TDOA positioning system with the aim of broadening the coverage of indoor positioning and accommodating complex indoor environments. By employing an address-filter technique and group-switching process, tags can seamlessly move between groups with a high positioning rate, low latency, and high accuracy. We deployed the system in a medical center to locate and manage researchers with infectious medical waste, demonstrating its usefulness for practical healthcare institutions. Our proposed positioning system can thus facilitate precise and wide-range indoor and outdoor wireless localization.

Precision Enhancement of Wireless Localization System Using Passive DOA Multiple Sensor Network for Moving Target.

Determining the direction-of-arrival (DOA) of any signal of interest has long been of great interest to the wireless localization research community for military and civilian applications. To efficiently facilitate the deployment of DOA systems, the accuracy of wireless localization is critical. Hence, this paper proposes a novel method to improve the prediction result of a wireless DOA localization system. By considering the signal variation existing in the complex environment, the actual location of the target can be determined including the maximum prediction error. Moreover, the scenario of the moving target is further investigated by incorporating the adaptive Kalman Filter algorithm to obtain the prediction route of the flying drone based on the accuracy assessment method. This proposed adaptive Kalman Filter is a high-efficiency algorithm that can filter out the noise in the multipath area and optimize the predicted data in real-time. The simulation result agrees well with the measured data and thus validates the proposed DOA system with the adaptive Kalman Filter algorithm. The measured DOA of the fixed radiation source obtained by a single base station and the moving route of a flying drone from a two-base station localization system are presented and compared with the calculated results. Results show that the prediction error in an outdoor region of 500×500 m2 is about 10−20 m, which demonstrate the usefulness of the proposed wireless DOA system deployment in practical applications.

Ultra-Wideband Positioning Sensor with Application to an Autonomous Ultraviolet-C Disinfection Vehicle.

Due to the COVID-19 virus being highly transmittable, frequently cleaning and disinfecting facilities is common guidance in public places. However, the more often the environment is cleaned, the higher the risk of cleaning staff getting infected. Therefore, strong demand for sanitizing areas in automatic modes is undoubtedly expected. In this paper, an autonomous disinfection vehicle with an Ultraviolet-C (UVC) lamp is designed and implemented using an ultra-wideband (UWB) positioning sensor. The UVC dose for 90% inactivation of the reproductive ability of COVID-19 is 41.7 J/m2, which a 40 W UVC lamp can achieve within a 1.6 m distance for an exposure time of 30 s. With this UVC lamp, the disinfection vehicle can effectively sterilize in various scenarios. In addition, the high-accuracy UWB positioning system, with the time difference of arrival (TDOA) algorithm, is also studied for autonomous vehicle navigation in indoor environments. The number of UWB tags that use a synchronization protocol between UWB anchors can be unlimited. Moreover, this proposed Gradient Descent (GD), which uses Taylor method, is a high-efficient algorithm for finding the optimal position for real-time computation due to its low error and short calculating time. The generalized traversal path planning procedure, with the edge searching method, is presented to improve the efficiency of autonomous navigation. The average error of the practical navigation demonstrated in the meeting room is 0.10 m. The scalability of the designed system to different application scenarios is also discussed and experimentally demonstrated. Hence, the usefulness of the proposed UWB sensor applied to UVC disinfection vehicles to prevent COVID-19 infection is verified by employing it to sterilize indoor environments without human operation.