NNC-Scorpionate Zirconium-Based Bicomponent Systems for the Efficient CO2 Fixation into a Variety of Cyclic Carbonates.

Two new derivatives of the bis(3,5-dimethylpyrazol-1-yl)methane modified by introduction of organosilyl groups on the central carbon atom, one of which bearing a chiral fragment, have been easily prepared. We verified the potential utility of these compounds through the reaction with [Zr(NMe2)4] for the preparation of novel zirconium complexes in which an ancillary bis(pyrazol-1-yl)methanide acts as a robust monoanionic tridentate scorpionate in a κ3-NNC chelating mode, forming strained four-membered heterometallacycles. These κ3-NNC-scorpionate zirconium amides were investigated as catalysts in combination with tetra-n-butylammonium bromide as cocatalyst for CO2 fixation into five-membered cyclic carbonate products. The study has led to the development of an efficient zirconium-based bicomponent system for the selective cycloaddition reaction of CO2 with epoxides. Kinetics investigations confirmed apparent first-order dependence on the catalyst and cocatalyst concentrations. In addition, this system displays very broad substrate scope, including mono- and disubstituted substrates, as well as the challenging biorenewable terpene derived limonene oxide, under mild and solvent-free conditions.

SN1 reactions in supercritical carbon dioxide in the presence of alcohols: the role of preferential solvation.

Ethanol () inhibits SN1 reactions of alkyl halides in supercritical carbon dioxide (scCO2) and gives no ethers as products. The unexpected behaviour of alcohols in the reaction of alkyl halides with 1,3-dimethoxybenzene () in scCO2 under different conditions is rationalised in terms of Brønsted and Lewis acid-base equilibria of reagents, intermediates, additives and products in a singular solvent characterised by: (i) the strong quadrupole and Lewis acid character of carbon dioxide, which hinders SN2 paths by strongly solvating basic solutes; (ii) the weak Lewis base character of carbon dioxide, which prevents it from behaving as a proton sink; (iii) the compressible nature of scCO2, which enhances the impact of preferential solvation on carbon dioxide availability for the solvent-demanding rate determining step.

Reactions at interfaces: oxygenation of n-butyl ligands anchored on silica surfaces with methyl(trifluoromethyl)dioxirane.

The oxygenation of n-butyl and n-butoxy chains bonded to silica with methyl(trifluoromethyl)dioxirane (1) revealed the ability of the silica matrix to release electron density toward the reacting C(2)-H σ-bond through the Si-C(1) and Si-O(1) σ-bonds connecting the alkyl chain to the surface (silicon ß-effect). The silica surface impedes neither the alkyl chain adopting the conformation required for the silicon ß-effect nor dioxirane 1 approaching the reactive C(2) methylene group. Reaction regioselectivity is insensitive to changes in the solvation of the reacting system, the location of organic ligands on the silica surface, and the H-bonding character of the silica surface. Reaction rates are faster for those organic ligands either within the silica pores or bonded to hydrophilic silica surfaces, which evidence the enhanced molecular dynamics of confined dioxirane 1 and the impact of surface phenomena on the reaction kinetics. The oxygenation of n-butyl and n-butoxy chains carrying trimethylsilyl, trimethoxysilyl, and tert-butyl groups with dioxirane 1 under homogeneous conditions confirms the electronic effects of the silyl substituents and the consequences of steric hindrance on the reaction rate and regioselectivity. Orthosilicic acid esters react preferentially at the methylene group adjacent to the oxygen atom in clear contrast with the reactivity of the carboxylic or sulfonic acid alkyl esters, which efficiently protect this position toward oxidation with 1.

Direct synthesis of NNN-donor enantiopure scorpionate ligands by an efficient diastereoselective nucleophilic addition to imines.

New enantiopure imines (1-9) with a chiral substrate to control the stereochemistry of a newly created stereogenic center have been synthesized by reaction of the commercially available (1R)-(-)-myrtenal and different primary amines. The diastereomerically enriched lithium-scorpionate compounds [Li(κ(3)-mobpza)(THF)] (10) (mobpza = N-p-methylphenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide), [Li(κ(3)-mobpza)(THF)] (11) (mobpza = N-p-methoxyphenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide), [Li(κ(3)-fbpza)(THF)] (12) (fbpza = N-p-fluorophenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide), and [Li(κ(3)-clbpza)(THF)] (13) (clbpza = N-p-chlorophenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide) were obtained by a diastereoselective 1,2-addition of an organolithium reagent to imines in good yield and with good diastereomeric excess (ca. 80%). The complexes [LiCl(κ(2)-R,R-fbpzaH)(THF)] (14) and [LiCl(κ(2)-R,R-clbpzaH)(THF)] (15) were obtained in enantiomerically pure form by the treatment of THF solutions of 12 or 13 with NH(4)Cl. The enantiomerically pure amines (R,R-mbpzaH) (16), (R,R-mobpzaH) (17), (R,R-fbpzaH) (18), and (R,R-clbpzaH) (19) were obtained by hydrolysis of the lithium-scorpionate compounds 10-13 with H(2)O. The lithium compound 12 was reacted with [TiCl(4)(THF)(2)] or [ZrCl(4)] to give the enantiopure complexes [MCl(3)(κ(3)-R,R-fbpza)] [M = Ti (20), Zr (21)]. The amine compound 18 reacted with [MX(4)] (M = Ti, X = O(i)Pr, OEt; M = Zr; X = NMe(2)) to give the complexes [MX(3)(κ(3)-R,R-fbpza)] (22-24). The reaction of Me(3)SiCl with [Zr(NMe(2))(3)(κ(3)-R,R-fbpza)] (24) in different molar ratios led to the halide-amide-containing complexes [ZrCl(NMe(2))(2)(κ(3)-R,R-fbpza)] (25) and [ZrCl(2)(NMe(2))(κ(3)-R,R-fbpza)] (26) and the halide complex 21. The isolation of only one of the three possible diastereoisomers of complexes 25 and 26 revealed that chiral induction from the ligand to the zirconium center took place. The structures of these compounds were elucidated by (1)H and (13)C{(1)H} NMR spectroscopy, and the X-ray crystal structures of 5, 12, 14, 15, and 24 were also established.

Highly thermally stable and robust enantiopure zirconium NNN-scorpionates for the controlled ring-opening polymerization of rac-lactide.

A series of enantiopure alkoxide and thioalkoxide zirconium derivatives [Zr(ER)3(κ3-R,R-fbpza)] (1-6) (E = O, R = CHMe21, CHMeEt 2, CH2SiMe33, 2,6-C6H3Me24, 4-tBuPh 5; E = S, R = 4-tBuPh 6) has been prepared for use as thermally stable and robust initiators in the ROP of rac-lactide. The compounds were prepared by alcoholysis or thioalcoholysis of the tris(amide) precursor [Zr(NMe2)3(κ3-R,R-fbpza)] [R,R-fbpzaH = N-p-fluorophenyl-(1R)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamine] with ROH and ArEH (E = O, S) in a 1 : 3 molar ratio. The structures of the different compounds were determined by spectroscopic methods and, in addition, the X-ray crystal structure of 6 was also established. Interestingly, the tris(amide) precursor and complexes 2, 5, and 6 act as single-site living initiators for the well-controlled ring-opening polymerization of rac-lactide both in solution and in the melt. These processes produce polymers with medium molecular weights in good agreement with theoretical values and with narrow dispersity ranges. The activity of all initiators increased markedly with temperature and, more importantly, complex 2 exhibits the highest activity reported to date for a group 4-based initiator in the ROP of rac-LA under the industrially preferred melt and solvent-free conditions. Surprisingly, complex 2 is still highly active in the melt when using an unpurified monomer and it shows an unprecedented tolerance to water and impurities (49% conv., 15 min, 130 °C). Microstructural analysis of the poly(rac-lactide)s revealed a moderate heteroactivity in solution, with a Ps value of up to 0.70.

Tris(pentafluorophenyl)borane as an efficient catalyst in the guanylation reaction of amines.

Tris(pentafluorophenyl)borane, [B(C6F5)3], has been used as an efficient catalyst in the guanylation reaction of amines with carbodiimide under mild conditions. A combined approach involving NMR spectroscopy and DFT calculations was employed to gain a better insight into the mechanistic features of this process. The results allowed us to propose a new Lewis acid-assisted Brønsted acidic pathway for the guanylation reaction. The process starts with the interaction of tris(pentafluorphenyl)borane and the amine to form the corresponding adduct, [(C6F5)3B-NRH2] , followed by a straightforward proton transfer to one of the nitrogen atoms of the carbodiimide, (i)PrN[double bond, length as m-dash]C[double bond, length as m-dash]N(i)Pr, to produce, in two consequent steps, a guanidine-borane adduct, [(C6F5)3B-NRC(N(i)PrH)2] . The rupture of this adduct liberates the guanidine product RNC(N(i)PrH)2 and interaction with additional amine restarts the catalytic cycle. DFT studies have been carried out in order to study the thermodynamic characteristics of the proposed pathway. Significant borane adducts with amines and guanidines have been isolated and characterized by multinuclear NMR in order to study the N-B interaction and to propose the existence of possible Frustrated Lewis Pairs. Additionally, the molecular structures of significant components of the catalytic cycle, namely 4-tert-butylaniline-[B(C6F5)3] adduct and both free and [B(C6F5)3]-bonded 1-(phenyl)-2,3-diisopropylguanidine, and respectively, have been established by X-ray diffraction.

Oppenauer oxidation of secondary alcohols with 1,1,1-trifluoroacetone as hydride acceptor.

1,1,1-Trifluoroacetone (2a) reacts as a hydride-acceptor in the Oppenauer oxidation of secondary alcohols (1) in the presence of diethylethoxyaluminum. The oxidant allows for selective oxidation of secondary alcohols in the presence of primary alcohols.