RESUMO
Even though nanocomposites have provided a plethora of routes to increase stiffness and strength, achieving increased toughness with suppressed catastrophic crack growth has remained more challenging. Inspired by the concepts of mechanically excellent natural nanomaterials, one-component nanocomposites were fabricated involving reinforcing colloidal nanorod cores with polymeric grafts containing supramolecular binding units. The concept is based on mechanically strong native cellulose nanocrystals (CNC) grafted with glassy polymethacrylate polymers, with side chains that contain 2-ureido-4[1H]-pyrimidone (UPy) pendant groups. The interdigitation of the grafts and the ensuing UPy hydrogen bonds bind the nanocomposite network together. Under stress, UPy groups act as sacrificial bonds: simultaneously providing adhesion between the CNCs while allowing them to first orient and then gradually slide past each other, thus dissipating fracture energy. We propose that this architecture involving supramolecular binding units within side chains of polymer grafts attached to colloidal reinforcements opens generic approaches for tough nanocomposites.
Assuntos
Celulose/química , Nanocompostos/química , Nanopartículas/química , Ligação de Hidrogênio , Microscopia Eletrônica de VarreduraRESUMO
We show that functionalizing polymer-coated colloidal nanoplatelets with guanosine groups allows synergistic increase of mechanical properties in nacre-mimetic lamellar self-assemblies. Anionic montmorillonite (MTM) was first coated using cationic poly(diallyldimethylammonium chloride) (PDADMAC) to prepare core-shell colloidal platelets, and subsequently the remaining chloride counterions allowed exchange to functional anionic 2'-deoxyguanosine 5'-monophosphate (dGMP) counterions, containing hydrogen bonding donors and acceptors. The compositions were studied using elemental analysis, scanning and transmission electron microscopy, wide-angle X-ray scattering, and tensile testing. The lamellar spacing between the clays increases from 1.85 to 2.14 nm upon addition of the dGMP. Adding dGMP increases the elastic modulus, tensile strength, and strain 33.0%, 40.9%, and 5.6%, respectively, to 13.5 GPa, 67 MPa, and 1.24%, at 50% relative humidity. This leads to an improved toughness seen as a ca. 50% increase of the work-to-failure. This is noteworthy, as previously it has been observed that connecting the core-shell nanoclay platelets covalently or ionically leads to increase of the stiffness but to reduced strain. We suggest that the dynamic supramolecular bonds allow slippage and sacrificial bonds between the self-assembling nanoplatelets, thus promoting toughness, still providing dynamic interactions between the platelets.
Assuntos
Nucleotídeos de Desoxiguanina/química , Nácar/química , Nanocompostos/química , Bentonita/química , Biomimética , Coloides , Módulo de Elasticidade , Umidade , Ligação de Hidrogênio , Teste de Materiais , Membranas Artificiais , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Propriedades de Superfície , Resistência à Tração , Difração de Raios XRESUMO
Breast cancer is now globally the most frequent cancer and leading cause of women's death. Two thirds of breast cancers express the luminal estrogen receptor-positive (ERα + ) phenotype that is initially responsive to antihormonal therapies, but drug resistance emerges. A major barrier to the understanding of the ERα-pathway biology and therapeutic discoveries is the restricted repertoire of luminal ERα + breast cancer models. The ERα + phenotype is not stable in cultured cells for reasons not fully understood. We examine 400 patient-derived breast epithelial and breast cancer explant cultures (PDECs) grown in various three-dimensional matrix scaffolds, finding that ERα is primarily regulated by the matrix stiffness. Matrix stiffness upregulates the ERα signaling via stress-mediated p38 activation and H3K27me3-mediated epigenetic regulation. The finding that the matrix stiffness is a central cue to the ERα phenotype reveals a mechanobiological component in breast tissue hormonal signaling and enables the development of novel therapeutic interventions. Subject terms: ER-positive (ER + ), breast cancer, ex vivo model, preclinical model, PDEC, stiffness, p38 SAPK.
Assuntos
Neoplasias da Mama/genética , Receptor alfa de Estrogênio/genética , Mecanotransdução Celular/genética , Transcriptoma , Proteínas Quinases p38 Ativadas por Mitógeno/genética , Neoplasias da Mama/metabolismo , Neoplasias da Mama/patologia , Estudos de Casos e Controles , Linhagem Celular Tumoral , Cinamatos/farmacologia , Colágeno/química , Colágeno/farmacologia , Combinação de Medicamentos , Proteína Potenciadora do Homólogo 2 de Zeste/genética , Proteína Potenciadora do Homólogo 2 de Zeste/metabolismo , Estradiol/farmacologia , Receptor alfa de Estrogênio/metabolismo , Feminino , Fulvestranto/farmacologia , Perfilação da Expressão Gênica , Regulação Neoplásica da Expressão Gênica , Histonas/genética , Histonas/metabolismo , Humanos , Indazóis/farmacologia , Laminina/química , Laminina/farmacologia , Glândulas Mamárias Humanas/efeitos dos fármacos , Glândulas Mamárias Humanas/metabolismo , Glândulas Mamárias Humanas/patologia , Fenótipo , Proteoglicanas/química , Proteoglicanas/farmacologia , Tamoxifeno/farmacologia , Técnicas de Cultura de Tecidos , Proteínas Quinases p38 Ativadas por Mitógeno/metabolismoRESUMO
Inspired by the specific strain stiffening and negative normal force phenomena in several biological networks, herein, we show strain stiffening and negative normal force in agarose hydrogels. We use both pre-strain and strain amplitude sweep protocols in dynamic rheological measurements where the gel slip was suppressed by the in situ gelation in the cross-hatched parallel plate rheometer geometry. Within the stiffening region, we show the scaling relation for the differential modulus K â σ1, where σ is stress. The strain at the onset of stiffening is almost constant throughout the concentration range. The gels show negative apparent normal stress difference when sheared as a result of the gel contraction. The pore size of the hydrogel is large enough to allow water to move with respect to the network to balance the pressure difference caused by the hoop stress. The rheological analysis together with scanning electron microscopy suggests that the agarose gels can be described using subisostatic athermal network models where the connectivity dictates the stiffening behavior. Therefore, the simple agarose gels appear to capture several of the viscoelastic properties, which were previously thought to be characteristic to biological protein macromolecules.
RESUMO
Strain-stiffening is one of the characteristic properties of biological hydrogels and extracellular matrices, where the stiffness increases upon increased deformation. Whereas strain-stiffening is ubiquitous in protein-based materials, it has been less observed for polysaccharide and synthetic polymer gels. Here we show that agarose, that is, a common linear polysaccharide, forms helical fibrillar bundles upon cooling from aqueous solution. The hydrogels with these semiflexible fibrils show pronounced strain-stiffening. However, to reveal strain-stiffening, suppressing wall slippage turned as untrivial. Upon exploring different sample preparation techniques and rheological architectures, the cross-hatched parallel plate geometries and in situ gelation in the rheometer successfully prevented the slippage and resolved the strain-stiffening behavior. Combining with microscopy, we conclude that strain-stiffening is due to the semiflexible nature of the agarose fibrils and their geometrical connectivity, which is below the central-force isostatic critical connectivity. The biocompatibility and the observed strain-stiffening suggest the potential of agarose hydrogels in biomedical applications.
RESUMO
Biological high-performance composites inspire to create new tough, strong, and stiff structural materials. We show a brittle-to-ductile transition in a self-assembled nacre-inspired poly(vinyl alcohol)/nanoclay composite based on a hydration-induced glass-to-rubber transition in the 2D-nanoconfined poly(vinyl alcohol) layers. The findings open routes to design dissipative toughening mechanisms to combine stiffness and strength in nanocomposites.
RESUMO
The aim of this work was to develop an innovative supercritical fluid (SCF)-assisted molecular imprinting method to endow commercial soft contact lenses (SCLs) with the ability to load specific drugs and to control their release. This approach seeks to overcome the limitation of the common loading of preformed SCLs by immersion in concentrated drug solutions (only valid for highly water soluble drugs) and of the molecular imprinting methods that require choice of the drug before polymerization and thus to create drug-tailored networks. In particular, we focused on improving the flurbiprofen load/release capacity of daily wear Hilafilcon B commercial SCLs by the use of sequential SCF flurbiprofen impregnation and extraction steps. Supercritical carbon dioxide (scCO2) impregnation assays were performed at 12.0 MPa and 40 °C, while scCO2 extractions were performed at 20.0 MPa and 40 °C. Conventional flurbiprofen sorption and drug removal experiments in aqueous solutions were carried out for comparison purposes. SCF-processed SCLs showed a recognition ability and a higher affinity for flurbiprofen in aqueous solution than for the structurally related ibuprofen and dexamethasone, which suggests the creation of molecularly imprinted cavities driven by both physical (swelling/plasticization) and chemical (carbonyl groups in the network with the C-F group in the drug) interactions. Processing with scCO2 did not alter some of the critical functional properties of SCLs (glass transition temperature, transmittance, oxygen permeability, contact angle), enabled the control of drug loaded/released amounts (by the application of several consecutive processing cycles) and permitted the preparation of hydrophobic drug-based therapeutic SCLs in much shorter process times than those using conventional aqueous-based molecular imprinting methods.