RESUMO
Solid-state dynamic nuclear polarization enhanced magic angle spinning (DNP-MAS) NMR measurements coupled with density functional theory (DFT) calculations enable the full resonance assignment of a complex pharmaceutical drug molecule without the need for isotopic enrichment. DNP dramatically enhances the NMR signals, thereby making possible previously intractable two-dimensional correlation NMR spectra at natural abundance. Using inputs from DFT calculations, herein we describe a significant improvement to the structure elucidation process for complex organic molecules. Further, we demonstrate that a series of two-dimensional correlation experiments, including 15N-13C TEDOR, 13C-13C INADEQUATE/SARCOSY, 19F-13C HETCOR, and 1H-13C HETCOR, can be obtained at natural isotopic abundance within reasonable experiment times, thus enabling a complete resonance assignment of sitagliptin, a pharmaceutical used for the treatment of type 2 diabetes.
Assuntos
Diabetes Mellitus Tipo 2 , Humanos , Imageamento por Ressonância Magnética , Espectroscopia de Ressonância Magnética/métodos , Preparações FarmacêuticasRESUMO
A combined experimental and computational approach was used to distinguish between different polymorphs of the pharmaceutical drug aspirin. This method involves the use of ab initio random structure searching (AIRSS), a density functional theory (DFT)-based crystal structure prediction method for the high-accuracy prediction of polymorphic structures, with DFT calculations of nuclear magnetic resonance (NMR) parameters and solid-state NMR experiments at natural abundance. AIRSS was used to predict the crystal structures of form-I and form-II of aspirin. The root-mean-square deviation between experimental and calculated 1 H chemical shifts was used to identify form-I as the polymorph present in the experimental sample, the selection being successful despite the large similarities between the molecular environments in the crystals of the two polymorphs.
Assuntos
Aspirina/análise , Teoria da Densidade Funcional , Cristalografia por Raios X , Espectroscopia de Ressonância Magnética , Modelos Moleculares , PrótonsRESUMO
Light-operated materials have gained significant attention for their potential technological importance. To achieve molecular motion within extended networks, stimuli-responsive units require free space. The majority of the so far reported 2D-extended organic networks with responsive moieties restrict their freedom of motion on account of their connectivity providing constrained free volume for efficient molecular motion. We report here a light-responsive azobenzene-functionalized covalent organic framework (TTA-AzoDFP) designed in a way that the pendent azobenzene groups are pointing toward the pore channels with sufficient free volume necessary for the unencumbered dynamic motion to occur inside the pores of the covalent organic framework (COF) and undergo a reversible trans-cis photoisomerization upon light irradiation. The resulting hydrophobic COF was used for the storage of rhodamine B and its controlled release in solution by the mechanical motion of the azobenzene units triggered by ultraviolet-light irradiation. The TTA-AzoDFP displayed unprecedented photoregulated fluorescence emission behavior upon UV-light irradiation. Size, emission, and degree of hydrophobicity with respect to trans-cis-trans photoisomerization could be reversibly controlled by alternating UV- and visible-light exposure. The results reported here demonstrate once again the importance of the careful design of the linkers not only to allow the incorporation of molecular switches within the chemical structure of COFs but also to provide the required free space for not hindering their motion. The results demonstrate that responsive COFs could be suitable platforms for delivery systems that can be controlled by external stimuli.
RESUMO
We have chemically modified cellulose nanofibrils (CNF) with furan and maleimide groups, and selectively labeled the modified CNF with fluorescent probes; 7-mercapto-4-methylcoumarin and fluorescein diacetate 5-maleimide, through two specific click chemistry reactions: Diels-Alder cycloaddition and the thiol-Michael reaction. Characterization by solid-state (13)C NMR and infrared spectroscopy was used to follow the surface modification and estimate the substitution degrees. We demonstrate that the two luminescent dyes could be selectively labeled onto CNF, yielding a multicolor CNF that was characterized by UV/visible and fluorescence spectroscopies. It was demonstrated that the multicolor CNF could be imaged using a confocal laser scanning microscope.
Assuntos
Celulose/química , Química Click/métodos , Corantes Fluorescentes/química , Nanopartículas/química , Furanos/química , Maleimidas/química , Madeira/químicaRESUMO
Host-guest complexes between cryptophane-A analogue with butoxy groups (cryptophane-But) and chloromethanes (chloroform, dichloromethane) were investigated in the solid state by means of magic-angle spinning (13)C NMR spectroscopy. The separated local fields method with (13)C-(1)H dipolar recoupling was used to determine the residual dipolar coupling for the guest molecules encaged in the host cavity. In the case of chloroform guest, the residual dipolar interaction was estimated to be about 19 kHz, consistent with a strongly restricted mobility of the guest in the cavity, while no residual interaction was observed for encaged dichloromethane. In order to rationalize this unexpected result, we performed single crystal X-ray diffraction studies, which confirmed that both guest molecules indeed were present inside the cryptophane cavity, with a certain level of disorder. To improve the insight in the dynamics, we performed a (13)C NMR spin-lattice relaxation study for the dichloromethane guest in solution. The system was characterized by chemical exchange, which was slow on the chemical shift time scale but fast with respect to the relaxation rates. Despite these disadvantageous conditions, we demonstrated that the data could be analyzed and that the results were consistent with an isotropic reorientation of dichloromethane within the cryptophane cavity.
RESUMO
Magic-angle-spinning (MAS) nuclear magnetic resonance (NMR) experiments and molecular dynamics (MD) simulations were employed to investigate Na2O-B2O3-SiO2 and MgO-Na2O-B2O3-SiO2 glass structures up to ≈0.3 nm. This encompassed the {Na[p]}, {Mg[p]}, and {B[3], B[4]} speciations and the {Si, B[p], M[p]}-BO and {Si, B[p], M[p]}-NBO interatomic distances to the bridging oxygen (BO) and nonbridging oxygen (NBO) species, where the superscript indicates the coordination number. The MD simulations revealed the dominance of Mg[5] coordinations, as mirrored in average Mg2+ coordination numbers in the 5.2-5.5 range, which are slightly lower than those of the larger Na+ cation but with a narrower coordination distribution stemming from the higher cation field strength (CFS) of the smaller divalent Mg2+ ion. We particularly aimed to elucidate such Na+/Mg2+ CFS effects, which primarily govern the short-range structure but also the borosilicate (BS) glass network order, where both MD simulations and heteronuclear double-resonance 11B/29Si NMR experiments revealed a reduction of B[4]-O-Si linkages relative to B[3]-O-Si upon Mg2+-for-Na+ substitution. These effects were quantified and discussed in relation to previous literature on BS glasses, encompassing the implications for simplified structural models and descriptions thereof.
RESUMO
Profound knowledge of the molecular structure and supramolecular organization of organic molecules is essential to understand their structure-property relationships. Herein we demonstrate the packing arrangement of partially disordered nitro-perylenediimide (NO2-PDI), revealing that the perylenediimide units exhibit an X-shaped packing pattern. The packing of NO2-PDI is derived using a complementary approach that utilises solid-state NMR (ssNMR) and 3D electron diffraction (3D ED) techniques. Perylenediimide (PDI) molecules are captivating due to their high luminescence efficiency and optoelectronic properties, which are related to supramolecular self-assembly. Increasing the alkyl chain length on the imide substituent poses a more significant challenge in crystallizing the resulting molecule. In addition to the alkyl tails, other functional groups, like the nitro group attached as a bay substituent, can also cause disorder. Such heterogeneity could lead to diffuse scattering, which then complicates the interpretation of diffraction experiment data, where perfect periodicity is expected. As a result, there is an unmet need to develop a methodology for solving the structures of difficult-to-crystallize materials. A synergistic approach is utilised in this manuscript to understand the packing arrangement of the disordered material NO2-PDI by making use of 3D ED, ssNMR and density functional theory calculations (DFT). The combination of these experimental and theoretical approaches provides great promise in enabling the structural investigation of novel materials with customized properties across various applications, which are, due to the internal disorder, very difficult to study by diffraction techniques. By effectively addressing these challenges, our methodology opens up new avenues for material characterization, thereby driving exciting advancements in the field.
RESUMO
Interactions between biomolecules and structurally disordered calcium phosphate (CaP) surfaces are crucial for the regulation of bone mineralization by noncollagenous proteins, the organization of complexes of casein and amorphous calcium phosphate (ACP) in milk, as well as for structure-function relationships of hybrid organic/inorganic interfaces in biomaterials. By a combination of advanced solid-state NMR experiments and metadynamics simulations, we examine the detailed binding of O-phospho-l-serine (Pser) and l-serine (Ser) with ACP in bone-adhesive CaP cements, whose capacity of gluing fractured bone together stems from the close integration of the organic molecules with ACP over a subnanometer scale. The proximity of each carboxy, aliphatic, and amino group of Pser/Ser to the Ca2+ and phosphate species of ACP observed from the metadynamics-derived models agreed well with results from heteronuclear solid-state NMR experiments that are sensitive to the 13C-31P and 15N-31P distances. The inorganic/organic contacts in Pser-doped cements are also contrasted with experimental and modeled data on the Pser binding at nanocrystalline HA particles grown from a Pser-bearing aqueous solution. The molecular adsorption is driven mainly by electrostatic interactions between the negatively charged carboxy/phosphate groups and Ca2+ cations of ACP, along with H bonds to either protonated or nonprotonated inorganic phosphate groups. The Pser and Ser molecules anchor at their phosphate/amino and carboxy/amino moieties, respectively, leading to an extended molecular conformation across the surface, as opposed to an "upright standing" molecule that would result from the binding of one sole functional group.
RESUMO
O-phospho-l-serine (Pser) and its Ca salt, Ca[O-phospho-l-serine]·H2O (CaPser), play important roles for bone mineralization and were recently also proposed to account for the markedly improved bone-adhesive properties of Pser-doped calcium phosphate-based cements for biomedical implants. However, the hitherto few proposed structural models of Pser and CaPser were obtained by X-ray diffraction, thereby leaving the proton positions poorly defined. Herein, we refine the Pser and CaPser structures by density functional theory (DFT) calculations and contrast them with direct interatomic-distance constraints from two-dimensional (2D) nuclear magnetic resonance (NMR) correlation experimentation at fast magic-angle spinning (MAS), encompassing double-quantum-single-quantum (2Q-1Q) 1H NMR along with heteronuclear 13C{1H} and 31P{1H} correlation NMR experiments. The Pser and CaPser structures before and after refinements by DFT were validated against sets of NMR-derived effective 1H-1H, 1H-31P, and 1H-13C distances, which confirmed the improved accuracy of the refined structures. Each distance set was derived from one sole 2D NMR experiment applied to a powder without isotopic enrichment. The distances were extracted without invoking numerical spin-dynamics simulations or approximate phenomenological models. We highlight the advantages and limitations of the new distance-extraction procedure. Isotropic 1H, 13C, and 31P chemical shifts obtained by DFT calculations using the gauge including projector augmented wave (GIPAW) method agreed very well with the experimental results. We discuss the isotropic and anisotropic 13C and 31P chemical-shift parameters in relation to the previous literature, where most data on CaPser are reported herein for the first time.
Assuntos
Cálcio , Serina , Cristalografia , Espectroscopia de Ressonância Magnética , PrótonsRESUMO
We describe the covalent modification of the edges of laponite with organic groups and the influence of this modification on gelation behavior. We compare three materials: an unmodified laponite, a laponite edge modified with a trimethyl moiety (MLap), and an octyldimethyl moiety (OLap). Gelation is investigated using rheology and NMR T1 relaxation measurements and nuclear Overhauser enhancement spectroscopy (NOESY). MLap and OLap show qualitatively different gelation. Gelation of MLap is very similar to laponite: MLap gels over the same time scale as laponite and has about the same solid modulus, and the MLap gel is almost as transparent as laponite. In contrast, OLap gels rapidly relative to laponite and forms a weak, turbid gel. We believe that gelation in laponite and MLap results from the formation of a network of well-dispersed platelets (or a few platelets), while in OLap, gelation results from a network of stacks of several platelets. NMR relaxation measurements indicate that gelation does not affect the average relaxation of water protons. However, T1 increases marginally for the protons in the organic moieties in MLap and decreases for protons in the organic moieties in OLap. Relaxation measurements, analyses of line width, and NOESY taken together suggest that, in OLap, gelation is a consequence of association of the organic moieties on the laponite edges, and that this association strengthens with time. Thus, the time-dependent changes in NMR suggest a structural origin for the time-dependent changes in the rheological behavior.
Assuntos
Espectroscopia de Ressonância Magnética/métodos , Silicatos/química , Géis , Reologia , Temperatura , Fatores de Tempo , Água/químicaRESUMO
In feed drive systems, particularly machine tools, a contour error is more significant than the individual axial tracking errors from the view point of enhancing precision in manufacturing and production systems. The contour error must be within the permissible tolerance of given products. In machining complex or sharp-corner products, large contour errors occur mainly owing to discontinuous trajectories and the existence of nonlinear uncertainties. Therefore, it is indispensable to design robust controllers that can enhance the tracking ability of feed drive systems. In this study, an iterative learning contouring controller consisting of a classical Proportional-Derivative (PD) controller and disturbance observer is proposed. The proposed controller was evaluated experimentally by using a typical sharp-corner trajectory, and its performance was compared with that of conventional controllers. The results revealed that the maximum contour error can be reduced by about 37% on average.
RESUMO
When exposed to body fluids, mesoporous bioactive glasses (MBGs) of the CaO-SiO2-P2O5 system develop a bone-bonding surface layer that initially consists of amorphous calcium phosphate (ACP), which transforms into hydroxy-carbonate apatite (HCA) with a very similar composition as bone/dentin mineral. Information from various 1H-based solid-state nuclear magnetic resonance (NMR) experiments was combined to elucidate the evolution of the proton speciations both at the MBG surface and within each ACP/HCA constituent of the biomimetic phosphate layer formed when each of three MBGs with distinct Ca, Si, and P contents was immersed in a simulated body fluid (SBF) for variable periods between 15 min and 30 days. Directly excited magic-angle-spinning (MAS) 1H NMR spectra mainly reflect the MBG component, whose surface is rich in water and silanol (SiOH) moieties. Double-quantum-single-quantum correlation 1H NMR experimentation at fast MAS revealed their interatomic proximities. The comparatively minor H species of each ACP and HCA component were probed selectively by heteronuclear 1H-31P NMR experimentation. The initially prevailing ACP phase comprises H2O and "nonapatitic" HPO42-/PO43- groups, whereas for prolonged MBG soaking over days, a well-progressed ACP â HCA transformation was evidenced by a dominating O1H resonance from HCA. We show that 1H-detected 1H â 31P cross-polarization NMR is markedly more sensitive than utilizing powder X-ray diffraction or 31P NMR for detecting the onset of HCA formation, notably so for P-bearing (M)BGs. In relation to the long-standing controversy as to whether bone mineral comprises ACP and/or forms via an ACP precursor, we discuss a recently accepted structural core-shell picture of both synthetic and biological HCA, highlighting the close relationship between the disordered surface layer and ACP.
RESUMO
We characterize the intermixing of network-modifying Na(+)/Ca(2+) ions around the silicate (QSi(n)) and phosphate (QP(n)) tetrahedra in a series of 16 Na2OCaOSiO2P2O5 glasses, whose P content and silicate network connectivity were varied independently. The set includes both bioactive and bioinactive compositions and also encompasses two soda-lime-silicate members devoid of P, as well as two CaOSiO2 glasses and one Na2OSiO2P2O5 glass. The various Si/PâNa/Ca contacts were probed by molecular dynamics (MD) simulations together with heteronuclear magic-angle-spinning (MAS) nuclear magnetic resonance (NMR) experimentation utilizing (23)Na{(31)P} and (23)Na{(29)Si} REDOR, as well as (31)P{ (23)Na} and (29)Si{(23)Na} REAPDOR. We introduce an approach for quantifying the extent of Na(+)/Ca(2+) ordering around a given QP(n) or QSi(n) group, encoded by the preference factor 0⩽ PM ⩽ 1 conveying the relative weights of a random cation intermixing (PM = 0) and complete preference/ordering (PM = 1) for one of the species M, which represents either Na(+) or Ca(2+). The MD-derived preference factors reveal phosphate and silicate species surrounded by Na(+)/Ca(2+) ions intermixed nearly randomly (PM â² 0.15), except for the QSi(4) and QSi(1) groups, which manifest more significant cation ordering with preference for Na+ and Ca2+, respectively. The overall weak preferences are essentially independent of the Si and P contents of the glass, whereas PM primarily correlates with the total amount of network modifiers: as the latter is increased, the Na/Ca distribution around the {QP(0), QSi(1), QSi(2)} groups with preference for Ca2(+ )tend to randomize (i.e., PCa decreases), while the PNa-values grow slightly for the {QP(1), QSi(3), QSi(4)} species already preferring coordination of Na. The set of experimental preference factors {PCa} for the orthophosphate (QP(0)) groups extracted from (31)P{(23)Na} REAPDOR NMR-derived M2(PNa) dipolar second moments agrees well with the MD-generated counterparts. Our results on the Na/Ca intermixing in soda-lime-silicate glasses are discussed in relation to previous reports, highlighting the dependence of the conclusion on the approach to data evaluation.
RESUMO
The analysis of S{I} recoupling experiments applied to amorphous solids yields a heteronuclear second moment M(2)(S-I) that represents the effective through-space dipolar interaction between the detected S spins and the neighboring I-spin species. We show that both M(2)(S-I) and M(2)(I-S) values are readily accessible from a sole S{I} or I{S} experiment, which may involve either S or I detection, and is naturally selected as the most favorable option under the given experimental conditions. For the common case where I has half-integer spin, an I{S} REDOR implementation is preferred to the S{I} REAPDOR counterpart. We verify the procedure by (23)Na{(31)P} REDOR and (31)P{(23)Na} REAPDOR NMR applied to Na(2)O-CaO-SiO(2)-P(2)O(5) glasses and biomimetic hydroxyapatite, where the M(2)(P-Na) values directly determined by REAPDOR agree very well with those derived from the corresponding M(2)(Na-P) results measured by REDOR. Moreover, we show that dipolar second moments are readily extracted from the REAPDOR NMR protocol by a straightforward numerical fitting of the initial dephasing data, in direct analogy with the well-established procedure to determine M(2)(S-I) values from REDOR NMR experiments applied to amorphous materials; this avoids the problems with time-consuming numerically exact simulations whose accuracy is limited for describing the dynamics of a priori unknown multi-spin systems in disordered structures.
Assuntos
Materiais Biocompatíveis/química , Biomimética , Durapatita/química , Silicatos/química , Ressonância Magnética Nuclear Biomolecular , Sódio/químicaRESUMO
Melt-derived bioactive phosphosilicate glasses are widely utilized as bone-grafting materials for various surgical applications. However, the insight into their structural features over a medium-range scale up to â¼ 1 nm remains limited. We present a comprehensive assessment of the spatial distribution of phosphate groups across the structures of 11 Na2O-CaO-SiO2-P2O5 glasses that encompass both bioactive and nonbioactive compositions, with the P contents and silicate network connectivities varied independently. Both parameters are known to strongly influence the bioactivity of the glass in vitro. The phosphate distribution was investigated by double-quantum (31)P nuclear magnetic resonance (NMR) experiments under magic-angle spinning (MAS) conditions and by molecular dynamics (MD) simulations. The details of the phosphate-ion dispersion were probed by evaluating the MD-derived glass models against various scenarios of randomly distributed, as well as clustered, phosphate groups. From comparisons of the P-P interatomic-distance spreads and the statistics of small phosphate clusters assessed for variable cutoff radii, we conclude that the spatial arrangement of the P atoms in phosphosilicate glasses is well-approximated by a statistical distribution, particularly across a short-range scale of ≤ 450 pm. The primary distinction is reflected in slightly closer P-P interatomic contacts in the MD-derived structures over the distance span of 450-600 pm relative to that of randomly distributed phosphate groups. The nature of the phosphate-ion dispersion remains independent of the silicate network polymerization and nearly independent of the P content of the glass throughout our explored parameter space of 1-6 mol % P2O5 and silicate network connectivities up to 2.9.
Assuntos
Vidro/química , Simulação de Dinâmica Molecular , Fosfatos/química , Silicatos/química , Espectroscopia de Ressonância Magnética , Conformação MolecularRESUMO
The physiological responses of silicate-based bioactive glasses (BGs) are known to depend critically on both the P content (n(P)) of the glass and its silicate network connectivity (N(BO)(Si)). However, while the bioactivity generally displays a nonmonotonic dependence on nP itself, recent work suggest that it is merely the net orthophosphate content that directly links to the bioactivity. We exploit molecular dynamics (MD) simulations combined with ³¹P and ²9Si solid-state nuclear magnetic resonance (NMR) spectroscopy to explore the quantitative relationships between N(BO)(Si), n(P), and the silicate and phosphate speciations in a series of Na2O-CaO-SiO2-P2O5 glasses spanning 2.1 ≤ N(BO)(Si) ≤ 2.9 and variable P2O5 contents up to 6.0 mol %. The fractional population of the orthophosphate groups remains independent of n(P) at a fixed N(BO)(Si)-value, but is reduced slightly as N(BO)(Si) increases. Nevertheless, P remains predominantly as readily released orthophosphate ions, whose content may be altered essentially independently of the network connectivity, thereby offering a route to optimize the glass bioactivity. We discuss the observed composition-structure links in relation to known composition-bioactivity correlations, and define how Na2O-CaO-SiO2-P2O5 compositions exhibiting an optimal bioactivity can be designed by simultaneously altering three key parameters: the silicate network connectivity, the (ortho)phosphate content, and the n(Na)/n(Ca) molar ratio.
Assuntos
Desenho de Fármacos , Vidro/química , Simulação de Dinâmica Molecular , Espectroscopia de Ressonância Magnética , Conformação Molecular , Silicatos/químicaRESUMO
We review the benefits of using (29)Si and (1)H magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy for probing the local structures of both bulk and surface portions of mesoporous bioactive glasses (MBGs) of the CaO-SiO(2)-(P(2)O(5)) system. These mesoporous materials exhibit an ordered pore arrangement, and are promising candidates for improved bone and tooth implants. We discuss experimental MAS NMR results from three MBGs displaying different Ca, Si and P contents: the (29)Si NMR spectra were recorded either directly by employing radio-frequency pulses to (29)Si, or by magnetization transfers from neighbouring protons using cross polarization, thereby providing quantitative information about the silicate speciation present in the pore wall and at the MBG surface, respectively. The surface modifications were monitored for the three MBGs during their immersion in a simulated body fluid (SBF) for intervals between 30 min and one week. The results were formulated as a reaction sequence describing the interconversions between the distinct silicate species. We generally observed a depletion of Ca(2+) ions at the MBG surface, and a minor condensation of the silicate-surface network over one week of SBF soaking.
Assuntos
Materiais Biocompatíveis/química , Cerâmica/química , Vidro/química , Espectroscopia de Ressonância Magnética/métodos , Teste de Materiais/métodos , Porosidade , Pós , Propriedades de SuperfícieRESUMO
A new molecular adduct of MgCl(2) with isobutanol, namely MgCl(2)·4((CH(3))(2)CHCH(2)OH) (MgiBOH), has been prepared as a precursor to the supporting material for an olefin polymerization catalyst. The MgiBOH adduct and final titanated Ziegler-Natta catalysts have been thoroughly characterized by powder XRD, thermal analysis, Raman spectroscopy and solid-state NMR for structural and spectroscopy aspects. A peak observed at 712 cm(-1) in the Raman spectra of MgiBOH indicates the characteristic Mg-O(6) breathing mode and the formation of the adduct. The diffraction feature at 2θ = 7.8° (d = 11.223 Å) in the XRD confirms the adduct formation and the layered structure. The aim of the present article is to study how the insertion of a bulky isobutanol moiety affects the structural and electronic properties of the MgCl(2)·isobutanol molecular adduct. Indeed, the focus of the present study is to explore how the presence of isobutanol, in the initial molecular adduct, influences the final Z-N catalyst properties and its activity.
RESUMO
By exploiting (1)H and (31)P magic-angle spinning nuclear magnetic resonance (NMR) spectroscopy, we explore the proton and orthophosphate environments in biomimetic amorphous calcium phosphate (ACP) and hydroxy-apatite (HA), as grown in vitro at the surface of a 10CaO-85SiO(2)-5P(2)O(5) mesoporous bioactive glass (MBG) in either a simulated body fluid or buffered water. Transmission electron microscopy confirmed the presence of a calcium phosphate layer comprising nanocrystalline HA. Two-dimensional (1)H-(31)P heteronuclear correlation NMR established predominantly (1)H(2)Oâ(31)PO(4) (3-) and O(1)Hâ(31)PO(4) (3-) contacts in the amorphous and crystalline component, respectively, of the MBG surface-layer; these two pairs exhibit distinctly different (1)Hâ(31)P cross-polarization dynamics, revealing a twice as large squared effective (1)H-(31)P dipolar coupling constant in ACP compared with HA. These respective observations are mirrored in synthetic (well-crystalline) HA, and the amorphous calcium orthophosphate (CaP) clusters that are present in the pristine MBG pore walls: besides highlighting very similar local (1)H and (31)P environments in synthetic and biomimetic HA, our findings evidence closely related NMR characteristics, and thereby similar local structures, of the CaP clusters in the pristine MBG relative to biomimetic ACP.
RESUMO
Benzyl alcohol has been used to prepare a single phase MgCl(2).6BzOH molecular adduct as a support for an ethylene polymerization catalyst (Ziegler catalyst). The structural, spectroscopic and morphological aspects of the MgCl(2).6BzOH molecular adduct and the Ziegler catalyst have been thoroughly studied by various physicochemical characterization techniques. The presence of MgO(6) octahedrons due to the interaction of Mg(2+) with six -OH groups of the benzyl alcohol is confirmed from a Raman feature at 703 cm(-1), and structural studies. The supported catalyst activity has been evaluated for the ethylene polymerization reaction. The lower polymerization activity of the titanated Ziegler-Natta catalyst compared with a standard catalyst is attributed to the strong interaction of titanium chloride with the support and associated electronic factors.