Hybrid Moiré Excitons and Trions in Twisted MoTe2-MoSe2 Heterobilayers.

We report experimental and theoretical studies of MoTe2-MoSe2 heterobilayers with rigid moiré superlattices controlled by the twist angle. Using an effective continuum model that combines resonant interlayer electron tunneling with stacking-dependent moiré potentials, we identify the nature of moiré excitons and the dependence of their energies, oscillator strengths, and Landé g-factors on the twist angle. Within the same framework, we interpret distinct signatures of bound complexes among electrons and moiré excitons in nearly collinear heterostacks. Our work provides a fundamental understanding of hybrid moiré excitons and trions in MoTe2-MoSe2 heterobilayers and establishes the material system as a prime candidate for optical studies of correlated phenomena in moiré lattices.

Cove-Edged Chiral Graphene Nanoribbons with Chirality-Dependent Bandgap and Carrier Mobility.

Graphene nanoribbons (GNRs) have garnered significant interest due to their highly customizable physicochemical properties and potential utility in nanoelectronics. Besides controlling widths and edge structures, the inclusion of chirality in GNRs brings another dimension for fine-tuning their optoelectronic properties, but related studies remain elusive owing to the absence of feasible synthetic strategies. Here, we demonstrate a novel class of cove-edged chiral GNRs (CcGNRs) with a tunable chiral vector (n,m). Notably, the bandgap and effective mass of (n,2)-CcGNR show a distinct positive correlation with the increasing value of n, as indicated by theory. Within this GNR family, two representative members, namely, (4,2)-CcGNR and (6,2)-CcGNR, are successfully synthesized. Both CcGNRs exhibit prominently curved geometries arising from the incorporated [4]helicene motifs along their peripheries, as also evidenced by the single-crystal structures of the two respective model compounds (1 and 2). The chemical identities and optoelectronic properties of (4,2)- and (6,2)-CcGNRs are comprehensively investigated via a combination of IR, Raman, solid-state NMR, UV-vis, and THz spectroscopies as well as theoretical calculations. In line with theoretical expectation, the obtained (6,2)-CcGNR possesses a low optical bandgap of 1.37 eV along with charge carrier mobility of ∼8 cm2 V-1 s-1, whereas (4,2)-CcGNR exhibits a narrower bandgap of 1.26 eV with increased mobility of ∼14 cm2 V-1 s-1. This work opens up a new avenue to precisely engineer the bandgap and carrier mobility of GNRs by manipulating their chiral vector.

Simultaneous Inside and Outside Functionalization of Single-Walled Carbon Nanotubes.

Functionalizing single-walled carbon nanotubes (SWCNTs) in a robust way that does not affect the sp2 carbon framework is a considerable research challenge. Here we describe how triiodide salts of positively charged macrocycles can be used not only to functionalize SWCNTs from the outside, but simultaneously from the inside. We employed disulfide exchange in aqueous solvent to maximize the solvophobic effect and therefore achieve a high degree of macrocycle immobilization. Characterization by Raman spectroscopy, EDX-STEM and HR-TEM clearly showed that serendipitously this wet-chemical functionalization procedure also led to the encapsulation of polyiodide chains inside the nanotubes. The resulting three-shell composite materials are redox-active and experience an intriguing interplay of electrostatic, solvophobic and mechanical effects that could be of interest for applications in energy storage.

Click-Functionalization of Silanized Carbon Nanotubes: From Inorganic Heterostructures to Biosensing Nanohybrids.

Here we present an approach to functionalize silanized single-walled carbon nanotubes (SWNTs) through copper-free click chemistry for the assembly of inorganic and biological nanohybrids. The nanotube functionalization route involves silanization and strain-promoted azide-alkyne cycloaddition reactions (SPACC). This was characterized by X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy and Fourier transform infra-red spectroscopy. Silane-azide-functionalized SWNTs were immobilized from solution onto patterned substrates through dielectrophoresis (DEP). We demonstrate the general applicability of our strategy for the functionalization of SWNTs with metal nanoparticles (gold nanoparticles), fluorescent dyes (Alexa Fluor 647) and biomolecules (aptamers). In this regard, dopamine-binding aptamers were conjugated to the functionalized SWNTs to perform real-time detection of dopamine at different concentrations. Additionally, the chemical route is shown to selectively functionalize individual nanotubes grown on the surface of silicon substrates, contributing towards future nano electronic device applications.

Covalent Patterning of 2D MoS2.

The development of an efficient method to patterning 2D MoS2 into a desired topographic structure is of particular importance to bridge the way towards the ultimate device. Herein, we demonstrate a patterning strategy by combining the electron beam lithography with the surface covalent functionalization. This strategy allows us to generate delicate MoS2 ribbon patterns with a minimum feature size of 2 µm in a high throughput rate. The patterned monolayer MoS2 domain consists of a spatially well-defined heterophase homojunction and alternately distributed surface characteristics, which holds great interest for further exploration of MoS2 based devices.

Covalent Bisfunctionalization of Two-Dimensional Molybdenum Disulfide.

Covalent functionalization of two-dimensional molybdenum disulfide (2D MoS2 ) holds great promise in developing robust organic-MoS2 hybrid structures. Herein, for the first time, we demonstrate an approach to building up a bisfunctionalized MoS2 hybrid structure through successively reacting activated MoS2 with alkyl iodide and aryl diazonium salts. This approach can be utilized to modify both colloidal and substrate supported MoS2 nanosheets. We have discovered that compared to the adducts formed through the reactions of MoS2 with diazonium salts, those formed through the reactions of MoS2 with alkyl iodides display higher reactivity towards further reactions with electrophiles. We are convinced that our systematic study on the formation and reactivity of covalently functionalized MoS2 hybrids will provide some practical guidance on multi-angle tailoring of the properties of 2D MoS2 for various potential applications.

Two-Dimensional Antimony Oxide.

Two-dimensional (2D) antimony, so-called antimonene, can form antimonene oxide when exposed to air. We present different types of single- and few-layer antimony oxide structures, based on density functional theory (DFT) calculations. Depending on stoichiometry and bonding type, these novel 2D layers have different structural stability and electronic properties, ranging from topological insulators to semiconductors with direct and indirect band gaps between 2.0 and 4.9 eV. We discuss their vibrational properties and Raman spectra for experimental identification of the predicted structures.

Infrared Interlayer Exciton Emission in MoS_{2}/WSe_{2} Heterostructures.

We report light emission around 1 eV (1240 nm) from heterostructures of MoS_{2} and WSe_{2} transition metal dichalcogenide monolayers. We identify its origin in an interlayer exciton (ILX) by its wide spectral tunability under an out-of-plane electric field. From the static dipole moment of the state, its temperature and twist-angle dependence, and comparison with electronic structure calculations, we assign this ILX to the fundamental interlayer transition between the K valleys in this system. Our findings gain access to the interlayer physics of the intrinsically incommensurate MoS_{2}/WSe_{2} heterostructure, including moiré and valley pseudospin effects, and its integration with silicon photonics and optical fiber communication systems operating at wavelengths longer than 1150 nm.

Strain in InP/ZnSe, S core/shell quantum dots from lattice mismatch and shell thickness-Material stiffness influence.

We investigate the buildup of strain in InP quantum dots with the addition of shells of the lower-lattice constant materials ZnSe and ZnS by Raman spectroscopy. Both materials induce compressive strain in the core, which increases with increasing shell volume. We observe a difference in the shell behavior between the two materials: the thickness-dependence points toward an influence of the material stiffness. ZnS has a larger Young's modulus and requires less material to develop stress on the InP lattice at the interface, while ZnSe requires several layers to form a stress-inducing lattice at the interface. This hints at the material stiffness being an additional parameter of relevance for designing strained core/shell quantum dots.

Resonance Profiles of Valley Polarization in Single-Layer MoS_{2} and MoSe_{2}.

In this Letter, we present photoluminescence measurements with different excitation energies on single-layer MoS_{2} and MoSe_{2} in order to examine the resonance behavior of the conservation of circular polarization in these transition metal dichalcogenides. We find that the circular polarization of the emitted light is conserved to 100% in MoS_{2} and 84%/79% (A/A^{-} peaks) in MoSe_{2} close to resonance. The values for MoSe_{2} surpass any previously reported value. However, in contrast to previous predictions, the degree of circular polarization decreases clearly at energies less than the two-phonon longitudinal acoustic phonon energy above the resonance. Our findings indicate that at least two competing processes underly the depolarization of the emission in single-layer transition metal dichalcogenides.

Synthesis and Characterization of Nanotubes from Misfit (LnS)1+y TaS2 (Ln=Pr, Sm, Gd, Yb) Compounds.

The synthesis and characterization of nanotubes from misfit layered compounds (MLCs) of the type (LnS)1+y TaS2 (denoted here as LnS-TaS2 ; Ln=Pr, Sm, Gd, and Yb), not reported before, are described (the bulk compound YbS-LaS2 was not previously documented). Transmission electron microscopy and selected area electron diffraction showed that the interlayer spacing along the c axis decreased with an increase in the atomic number of the lanthanide atom, which suggested tighter interaction between the LnS layer and TaS2 for the late lanthanides. The Raman spectra of the tubules were studied and compared to those of the bulk MLC compounds. Similar to the bulk MLCs, the Raman spectra could be divided into the low-frequency modes (110-150 cm-1 ) of the LnS lattice and the high-frequency modes (250-400 cm-1 ) of the TaS2 lattice. The Raman spectra indicated that the vibrational lattice modes of the strained layers in the tubes were stiffer than those in the bulk compounds. Furthermore, the modes of the late lanthanides were higher in energy than those of the earlier lanthanides, which suggested larger charge transfer between the LnS and TaS2 layers for the late lanthanides. Polarized Raman measurements showed the expected binodal intensity profile (antenna effect). The intensity ratio of the Raman signal showed that the E2g mode of TaS2 was more sensitive to the light-polarization effect than its A1g mode. These nanotubes are expected to reveal interesting low-temperature quasi-1D transport behavior.

Fundamental Insights into the Degradation and Stabilization of Thin Layer Black Phosphorus.

Herein, we have developed a systematic study on the oxidation and passivation of mechanically exfoliated black phosphorus (BP). We analyzed the strong anisotropic behavior of BP by scanning Raman microscopy providing an accurate method for monitoring the oxidation of BP via statistical Raman spectroscopy. Furthermore, different factors influencing the environmental instability of the BP, i.e., thickness, lateral dimensions or visible light illumination, have been investigated in detail. Finally, we discovered that the degradation of few-layer BP flakes of <10 nm can be suppressed for months by using ionic liquids, paving the way for the development of BP-based technologies.

Interface formation during silica encapsulation of colloidal CdSe/CdS quantum dots observed by in situ Raman spectroscopy.

We investigate the encapsulation of CdSe/CdS quantum dots (QDs) in a silica shell by in situ Raman spectroscopy and find a distinct shift of the CdS Raman signal during the first hours of the synthesis. This shift does not depend on the final silica shell thickness but on the properties of the initial core-shell QD. We find a correlation between the Raman shift rate and the speed of the silica formation and attribute this to the changing configuration of the outermost layers of the QD shell, where an interface to the newly formed silica is created. This dependence of Raman shift rate on the speed of silica formation process will give rise to many possible studies concerning the growth mechanism in the water-in-oil microemulsion, rendering in situ Raman a valuable instrument in monitoring this type of reaction.

From isolated diamondoids to a van-der-Waals crystal: A theoretical and experimental analysis of a trishomocubane and a diamantane dimer in the gas and solid phase.

The electronic properties of sp2/sp3 diamondoids in the crystalline state and in the gas phase are presented. Apparent differences in electronic properties experimentally observed by resonance Raman spectroscopy in the crystalline/gas phase and absorption measurements in the gas phase were investigated by density functional theory computations. Due to a reorganization of the molecular orbitals in the crystalline phase, the HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) energy gaps are lowered significantly by 0.5 eV-1 eV. The π → π* transition is responsible for large absorption in both gas and crystalline phases. It further causes a large increase in the Raman intensity of the C=C stretch vibration when excited resonantly. By resonance Raman spectroscopy we were able to determine the C=C bond length of the trishomocubane dimer to exhibit 1.33 Å in the ground and 1.41 Å in the excited state.

Controlled folding of graphene: GraFold printing.

We have used elastomeric stamps with periodically varying adhesive properties to introduce structure and print folded graphene films. The structure of the induced folds is investigated with scanning probe techniques, high-resolution electron-microscopy, and tip-enhanced Raman spectroscopy. Furthermore, a finite element model is developed to show the fold formation process. Terahertz spectroscopy reveals induced anisotropy of carrier mobility along, and perpendicular to, the graphene folds. Graphene fold printing is a new technique which allows for significant modification of the properties of 2D materials without damaging or chemically modifying them.

Few-Layer Antimonene by Liquid-Phase Exfoliation.

We report on a fast and simple method to produce highly stable isopropanol/water (4:1) suspensions of few-layer antimonene by liquid-phase exfoliation of antimony crystals in a process that is assisted by sonication but does not require the addition of any surfactant. This straightforward method generates dispersions of few-layer antimonene suitable for on-surface isolation. Analysis by atomic force microscopy, scanning transmission electron microscopy, and electron energy loss spectroscopy confirmed the formation of high-quality few-layer antimonene nanosheets with large lateral dimensions. These nanolayers are extremely stable under ambient conditions. Their Raman signals are strongly thickness-dependent, which was rationalized by means of density functional theory calculations.

Solid-State Chemistry on the Nanoscale: Ion Transport through Interstitial Sites or Vacancies?

How can ion-exchange process occur in nanocrystals without the size and shape changing and why is the ion transport much faster than in classical interdiffusion processes in macrocrystalline solids? We have investigated these processes at the molecular level by means of high-resolution and analytical electron microscopy in temperature-dependent kinetic experiments for several model reactions. The results clearly show a diffusion process that proceeds exclusively through the interstitial lattice positions with a subsequent "kick out" to remove individual ions from lattice sites without the formation of vacancies. This mechanism has not been observed in nanocrystalline systems before.

Two-dimensional analysis of the double-resonant 2D Raman mode in bilayer graphene.

By computing the double-resonant Raman scattering cross section completely from first principles and including the electron-electron interaction at the GW level, we unravel the dominant contributions for the double-resonant 2D mode in bilayer graphene. We show that, in contrast to previous works, the so-called inner processes are dominant and that the 2D-mode line shape is described by three dominant resonances around the K point. We show that the splitting of the transversal optical (TO) phonon branch in the Γ-K direction, as large as 12 cm(-1) in the GW approximation, is of great importance for a thorough description of the 2D-mode line shape. Finally, we present a method to extract the TO phonon splitting and the splitting of the electronic bands from experimental data.

UV resonance Raman analysis of trishomocubane and diamondoid dimers.

We present resonance Raman measurements of crystalline trishomocubane and diamantane dimers containing a C=C double bond. Raman spectra were recorded with excitation energies between 2.33 eV and 5.42 eV. The strongest enhancement is observed for the C=C stretch vibration and a bending mode involving the two carbon atoms of the C=C bond, corresponding to the B2g wagging mode of ethylene. This is associated with the localization of the π-HOMO and LUMO and the elongation of the C=C bond length and a pyramidalization of the two sp(2)-hybridized carbon atoms at the optical excitation. The observed Raman resonance energies of the trishomocubane and diamantane dimers are significantly lower than the HOMO-LUMO gaps of the corresponding unmodified diamondoids.

Family behavior and Dirac bands in armchair nanoribbons with 4-8 defect lines.

Bottom-up synthesis from molecular precursors is a powerful route for the creation of novel synthetic carbon-based low-dimensional materials, such as planar carbon lattices. The wealth of conceivable precursor molecules introduces a significant number of degrees-of-freedom for the design of materials with defined physical properties. In this context,a prioriknowledge of the electronic, vibrational and optical properties provided by modernab initiosimulation methods can act as a valuable guide for the design of novel synthetic carbon-based building blocks. Using density functional theory, we performed simulations of the electronic properties of armchair-edged graphene nanoribbons (AGNR) with a bisecting 4-8 ring defect line. We show that the electronic structures of the defective nanoribbons of increasing width can be classified into three distinct families of semiconductors, similar to the case of pristine AGNR. In contrast to the latter, we find that every third nanoribbon is a zero-gap semiconductor with Dirac-type crossing of linear bands at the Fermi energy. By employing tight-binding models including interactions up to third-nearest neighbors, we show that the family behavior, the formation of direct and indirect band gaps and of linear band crossings in the defective nanoribbons is rooted in the electronic properties of the individual nanoribbon halves on either side of the defect lines, and can be effectively through introduction of additional 'interhalf' coupling terms.