25th Anniversary of Molecules-Recent Advances in Inorganic Chemistry.

Celebrating the "25th Anniversary of Molecules" with a Special Issue dedicated to "Recent Advances in Inorganic Chemistry" strengthens the renewed role that inorganic chemistry, one of the oldest chemistry divisions, has lately earned thanks to cutting-edge perspectives and interdisciplinary applications, eventually receiving the veneration and respect which its age might require [...].

Dynamic aggregation of the mid-sized gadolinium complex {Ph4[Gd(DTTA)(H2O)2](-)3}.

A compound binding three Gd(3+) ions, {Ph4[Gd(DTTA)(H2O)2](-) 3} (where H5DTTA is diethylenetriaminetetraacetic acid), has been synthesized around a hydrophobic center made up of four phenyl rings. In aqueous solution the molecules start to self-aggregate at concentrations well below 1 mM as shown by the increase of rotational correlation times and by the decrease of the translational self-diffusion constant. NMR spectra recorded in aqueous solution of the diamagnetic analogue {Ph4[Y(DTTA)(H2O)2](-)3} show that the aggregation is dynamic and due to intermolecular π-stacking interactions between the hydrophobic aromatic centers. From estimations of effective radii, it can be concluded that the aggregates are composed of two to three monomers. The paramagnetic {Ph4[Gd(DTTA)(H2O)2](-)3} exhibits concentration-dependent (1)H NMR relaxivities with high values of approximately 50 mM(-1) s(-1) (30 MHz, 25 °C) at gadolinium concentrations above 20 mM. A combined analysis of (1)H NMR dispersion profiles measured at different concentrations of the compound and (17)O NMR data measured at various temperatures was performed using different theoretical approaches. The fitted parameters showed that the increase in relaxivity with increasing concentration of the compound is due to slower global rotational motion and an increase of the Lipari-Szabo order parameter S(2).

Influence of arylalkyl amines on the formation of hybrid CsPbBr3 nanocrystals via a modified LARP method.

Perovskite nanocrystals have attracted much attention in the last ten years due to their different applications, especially in the photovoltaic domain and LED performance. In this large family of perovskite nanocrystals, CsPbBr3 nanocrystals are attractive nanomaterials because they are good candidates for obtaining green emissions and exploring new synthesis routes. In this context, controlling the nanometric scale's morphology, particularly the size and monodispersity, is fundamental for exploring their photophysical properties and final applications. Currently, the nanometric size of nanocrystals is ensured by the presence of oleic acid and oleylamine molecules, in using Hot Injection (HI) or ligand-assisted reprecipitation (LARP) methods. If oleic acid plays a fundamental role, oleylamine can be easily substituted by other amino molecules, opening the way for the functionalization of CsPbBr3 nanocrystals and the obtention of new hybrid perovskite nanocrystal families. In this article, we describe the synthesis, by soft chemistry, of a new family of hybrid organic-inorganic CsPbBr3 nanocrystals, functionalized by aryl-alkylamine (AAA) molecules, through the modified LARP method. We highlight the mechanism for cutting submicron crystals into nanocrystals, using aryl-alkylamine molecules like scissors. The impact of these amino molecules on the final nanocrystals leads to different nanocrystal morphologies (nanocubes, nanosheets, or nanorods) and structures (monoclinic, rhombohedral, or tetragonal). In addition, this modified LARP method highlights, under certain experimental conditions, an unexpected formation of PbO ribbons.

A multicolor photoinitiator for cationic polymerization and interpenetrated polymer network synthesis: 2,7-di-tert-butyldimethyldihydropyrene.

For polymer synthesis upon visible light, actual photoinitiator operates in a restricted part of the spectrum. As a consequence, several photoinitiators are necessary to harvest all of the emitted visible photons. Herein, 2,7-di-tert-butyldimethyldihydropyrene is used for the first time as a multicolor photoinitiator for the cationic polymerization of epoxides. Upon addition of diphenyliodonium hexafluorophosphate and optionally N-vinylcarbazole, the originality of this approach is to allow efficient monomer conversions under various excitation light sources in the 360-650 nm wavelength range: halogen lamps, and light-emitting and laser diodes. The synthesis of an interpenetrated polymer network from an epoxide/acrylate blend using a red light at 635 nm is also feasible. The formed polymer material exhibits a photochromic character.

Synthesis of highly calibrated CsPbBr3 nanocrystal perovskites by soft chemistry.

A new synthetic method for preparing highly calibrated CsPbBr3 nanocrystal perovskites is described and analyzed using high-resolution scanning transmission electron microscopy. This new method based on soft chemistry leads to the large-scale production of nanocrystals. Such monodisperse nanocrystals allow for the deposition of homogeneous films, which provides new opportunities for the next generation of optoelectronic devices.

Dithiolate-appended iridium(III) complex with dual functions of reducing and capping agent for the design of small-sized gold nanoparticles.

The unprecedented combined reduction of chloroauric acid and capping of the resulting gold nanoparticles in the absence of an external reducing agent are demonstrated using a novel heteroleptic Ir(III) complex incorporating a 4,5-diazafluorenedithiolate ligand. The reduction process in basic medium results from a cascade mechanism involving oxidation of the ligand, reduction of the gold salt, and stabilization and functionalization of the gold nanoparticles.

Capture of the complex [Ni(dto)2]2- (dto2- = dithiooxalato ligand) in a Mo12 ring: synthesis, characterizations, and application toward the reduction of protons.

The encapsulation of the complex [Ni(dto)(2)](2-) within an oxothiododecamolybdic cyclic cluster has been investigated. The resulting molybdenum ring, [Mo(12)O(12)S(12)(OH)(12)(Ni(dto)(2))](2-), corresponds to the first example of the {Mo(2)O(2)S(2)}-based assembly arranged around a 3d transition-metal complex. It was unambiguously characterized in the solid state and in solution by FT-IR spectroscopy, single-crystal X-ray diffraction, NMR, UV-visible spectroscopy, and electrospray ionization-high-resolution mass spectrometry (ESI-HRMS). The latter technique revealed to be a powerful tool for the characterization of templated molybdenum ring systems in solution and gave excellent results in high resolution. The electronic spectrum of [Mo(12)O(12)S(12)(OH)(12)(Ni(dto)(2))](2-) evidenced a strong red shift of the LMCT bands attributed to the complex [Ni(dto)(2)](2-), suggesting significant variations of the electronic properties upon its encapsulation within the Mo(12) ring. These differences were demonstrated by electrochemical studies in CH(3)CN, which also revealed, for both compounds [Ni(dto)(2)](2-) and [Mo(12)O(12)S(12)(OH)(12)(Ni(dto)(2))](2-), electrocatalytic properties for the reduction of protons. These results evidence the ability of dithioxalato complexes to act as electrocatalysts for the hydrogen evolution reaction (HER) and confirm such a property for oxothiomolybdenum rings.

Functionalization of Gold Nanoparticles by Inorganic Entities.

The great affinity of gold surface for numerous electron-donating groups has largely contributed to the rapid development of functionalized gold nanoparticles (Au-NPs). In the last years, a new subclass of nanocomposite has emerged, based on the association of inorganic molecular entities (IME) with Au-NPs. This highly extended and diversified subclass was promoted by the synergy between the intrinsic properties of the shell and the gold core. This review-divided into four main parts-focuses on an introductory section of the basic notions related to the stabilization of gold nanoparticles and defines in a second part the key role played by the functionalizing agent. Then, we present a wide range of inorganic molecular entities used to prepare these nanocomposites (NCs). In particular, we focus on four different types of inorganic systems, their topologies, and their current applications. Finally, the most recent applications are described before an overview of this new emerging field of research.

Gold nanoparticles functionalized with gadolinium chelates as high-relaxivity MRI contrast agents.

Water-dispersible gold nanoparticles functionalized with paramagnetic gadolinium have been fully characterized, and the NMRD profiles show very high relaxivities up to 1.5 T. Characterization using TEM images and dynamic light scattering indicate a particle size distribution from 2 to 15 nm. The gold cores of the nanoparticles do not contribute significantly to the overall magnetic moment.

Coupled sensitizer-catalyst dyads: electron-transfer reactions in a perylene-polyoxometalate conjugate.

Ultrafast discharge of a single-electron capacitor: A variety of intramolecular electron-transfer reactions are apparent for polyoxometalates functionalized with covalently attached perylene monoimide chromophores, but these are restricted to single-electron events. (et=electron transfer, cr=charge recombination, csr=charge-shift reaction, PER=perylene, POM=polyoxometalate).A new strategy is introduced that permits covalent attachment of an organic chromophore to a polyoxometalate (POM) cluster. Two examples are reported that differ according to the nature of the anchoring group and the flexibility of the linker. Both POMs are functionalized with perylene monoimide units, which function as photon collectors and form a relatively long-lived charge-transfer state under illumination. They are reduced to a stable pi-radical anion by electrolysis or to a protonated dianion under photolysis in the presence of aqueous triethanolamine. The presence of the POM opens up an intramolecular electron-transfer route by which the charge-transfer state reduces the POM. The rate of this process depends on the molecular conformation and appears to involve through-space interactions. Prior reduction of the POM leads to efficient fluorescence quenching, again due to intramolecular electron transfer. In most cases, it is difficult to resolve the electron-transfer products because of relatively fast reverse charge shift that occurs within a closed conformer. Although the POM can store multiple electrons, it has not proved possible to use these systems as molecular-scale capacitors because of efficient electron transfer from the one-electron-reduced POM to the excited singlet state of the perylene monoimide.

Electrochemical, linear optical, and nonlinear optical properties and interpretation by density functional theory calculations of (4-N,N-dimethylaminostyryl)-pyridinium pendant group associated with polypyridinic ligands and respective multifunctional metal complexes (Ru(II) or Zn(II)).

The synthesis, linear optical and nonlinear optical properties, as well as the electrochemical behavior of a series of pro-ligands containing the 4-(4-N,N-dimethylaminostyryl)-1-methyl pyridinium (DASP(+)) group as a push-pull moiety covalently linked to terpyridine or bipyridine as chelating ligands are reported in this full paper. The corresponding multifunctional Ru(II) and Zn(II) complexes were prepared and investigated. The structural, electronic, and optical properties of the pro-ligands and the ruthenium complexes were investigated using density functional theory (DFT) and time-dependent (TD) DFT calculations. A fairly good agreement was observed between the experimental and the calculated electronic spectra of the pro-ligands and their corresponding ruthenium complexes. A quenching of luminescence was evidenced in all ruthenium complexes compared with the free pro-ligands but even the terpyridine-functionalized metal complexes exhibited detectable luminescence at room temperature. Second order nonlinear optical (NLO) measurements were performed by Harmonic Light Scattering and the contribution of the DASP(+) moieties (and their relative ordering) and the metal-polypyridyl core need to be considered to explain the nonlinear optical properties of the metal complexes.

A porphyrin-polyoxometallate bio-inspired mimic for artificial photosynthesis.

A multi-porphyrin cluster has been covalently attached to a polyoxometallate (POM) catalyst so as to form an advanced model for the photosynthetic reaction complex. This bio-inspired mimic displays efficient energy transfer from the peripheral zinc porphyrins (ZnP) to the central free-base porphyrin (FbP). The latter species participates in a light-induced electron transfer with the POM. Charge recombination is hindered by hole transfer from the FbP to one of the ZnPs. Charge accumulation occurs at the POM under illumination in the presence of a sacrificial electron donor.

New chelating stilbazonium-like dyes from Michler's ketone.

A series of "push-pull" salts substituted with an electron-donating bis(N,N-dimethyl)aniline unit and different electron-withdrawing methyl or chelating pyridinium units have been designed and synthesized from Michler's ketone. The spectroscopic and electronic properties were investigated and compared to their DAST homologues. The studies revealed that a lower HOMO-LUMO gap is obtained in all cases, showing the ability of our donor to increase the "push-pull" effect. Two chromophores with a terpyridine as acceptor end group have also been prepared.

Facile synthesis of silver nano/micro-ribbons or saws assisted by polyoxomolybdate as mediator agent and vanadium(IV) as reducing agent.

Original and effective syntheses of crystalline silver wires and saw bundles, using reduced Keggin polyoxomolybdovanadate (POM) as mediator and reducing agent, were performed in acetonitrile at room temperature; several parameters influencing the final silver 1D-structures, with micrometric length and nanometric thickness, were varied: the nature of the POM, silver salts, vanadium(iv) source and the mild conditions.

Gold nanocomposites with rigid fully conjugated heteroditopic ligands shell as nanobuilding blocks for coordination chemistry.

Monodisperse and solvent adaptable gold nanoparticles stabilized by rigid and fully conjugated modified neocuproinium and terpyridinium salts have been characterized and further used as nanobuilding blocks for the synthesis of gold nanoparticles functionalized by polypyridyl ruthenium complexes.

Size controlled formation of silver nanoparticles by direct bonding of ruthenium complexes bearing a terminal mono- or bi-pyridyl group.

Two polypyridyl ruthenium complexes containing either a terminal pyridine or phenanthroline group have been used to coat silver nanoparticles and control their size depending on the Ag/[RuII] ratio.

Organic-Inorganic Hybrids Based on Polyoxometalates. 5.(1) Synthesis and Structural Characterization of Bis(organophosphoryl)decatungstosilicates [gamma-SiW(10)O(36)((RPO)(2)](4)(-).

Organophosphoryl polyoxotungstate derivatives [gamma-SiW(10)O(36)(RPO)(2)](4)(-) (R = H (1), Et (2), n-Bu (3), t-Bu (4), C(2)H(4)COOH (5), Ph (6)) have been obtained by reaction of the divacant [gamma-SiW(10)O(36)](8)(-) anion with organophosphonic acids RPO(OH)(2) in acetonitrile. These new heteropolyanions have been characterized by elemental analysis, infrared spectroscopy, multinuclear ((1)H, (29)Si, (31)P, and (183)W) NMR, and X-ray crystallography. Crystals of (NBu(4))(2)(NEt(4))H[gamma-SiW(10)O(36)(C(6)H(5)PO)(2)] (anion 6) are monoclinic, space group P2(1), with lattice constants a = 16.489(4) Å, b = 14.016(3) Å, c = 18.542(8) Å, beta = 91.30(3) degrees, and Z = 2. The hybrid anion has a structure of virtual C(2v)() symmetry with two phenylphosphonate groups grafted to the surface of the divacant tungstosilicate. (183)W and (31)P NMR spectra of NBu(4) salts in DMF solution agree with the solid-state structure and the virtual C(2)(v)() symmetry.

Supramolecular assemblies of gold nanoparticles induced by hydrogen bond interactions.

The formation of two-dimensional self-assemblies of ordered, packed gold nanoparticles is described. The nanoparticles were coated by a diamide thiol ligand (DASH) that ensured the connection of the nanoparticles through hydrogen bonds. The stability of the colloidal solutions is discussed with respect to the stability of the normal dodecanethiol-coated particles.

Unprecedented combination of regioselective hydrodefluorination and ligand exchange reaction during the syntheses of tris-cyclometalated iridium(III) complexes.

The first reported combination of regioselective hydro-defluorination and a ligand exchange reaction during the syntheses of neutral iridium(III) complexes is presented. Surprisingly, loss of one fluorine atom per ligand combined with a complete ligand exchange reaction on the transition metal were jointly observed during a bridge-splitting and substitution reaction of two different dimeric iridium(III) precursor complexes with two different ancillary ligands. The regioselectivity of defluorination was evidenced in both cases. The reaction time was identified as a factor strongly impacting the kinetics of the thermally induced reaction.