In vivo quantification of aortic stiffness using MR elastography in hypertensive porcine model.

PURPOSE: Aortic stiffness plays an important role in evaluating and predicting the progression of systemic arterial hypertension (SAH). The aim of this study is to determine the stiffness of aortic wall using MR elastography (MRE) in a hypertensive porcine model and compare it against invasive aortic pressure measurements. METHODS: Renal wrapping surgery was performed on eight pigs to induce SAH. Aortic MRE was performed at baseline and 2 months postsurgery using a retrospectively pulse-gated gradient-echo MRE sequence on a 1.5 tesla scanner. Mechanical waves of 70 Hz were introduced into the aorta. Invasive central aortic pressure measurements were obtained prior to each scan to calculate mean arterial pressure (MAP). MRE data were analyzed to obtain effective aortic stiffness. Spearman's rank correlation analysis was performed to assess the relationship between MAP and MRE-derived aortic stiffness. RESULTS: Significant increase in effective aortic stiffness was observed between baseline and 2 months postsurgery measurements (paired t test; P = 0.004). The average MAP, determined by pooling all animals, was 65.24 ± 9.42 mm Hg at baseline and 92.57 ± 11.80 mm Hg 2 months postsurgery with P < 0.0001. Moderate linear correlation was observed between MAP and effective aortic stiffness (ρ = 0.52; P = 0.046). CONCLUSION: This study demonstrated that, in a SAH porcine model, MRE-derived aortic stiffness increased with increase in MAP. Magn Reson Med 78:2315-2321, 2017. © 2017 International Society for Magnetic Resonance in Medicine.

In vivo quantification of myocardial stiffness in hypertensive porcine hearts using MR elastography.

PURPOSE: To determine alteration in left ventricular (LV) myocardial stiffness (MS) with hypertension (HTN). Cardiac MR elastography (MRE) was used to estimate MS in HTN induced pigs and MRE-derived MS measurements were compared against LV pressure, thickness and circumferential strain. MATERIALS AND METHODS: Renal-wrapping surgery was performed to induce HTN in eight pigs. LV catheterization (to measure pressure) and cardiac MRI (1.5 Tesla; gradient echo-MRE and tagging) was performed pre-surgery at baseline (Bx), and post-surgery at month 1 (M1) and month 2 (M2). Images were analyzed to estimate LV-MS, thickness, and circumferential strain across the cardiac cycle. The associations between end-diastolic (ED) and end-systolic (ES) MS and (i) mean LV pressure; (ii) ED and ES thickness, respectively; and (iii) circumferential strain were evaluated using Spearman's correlation method. RESULTS: From Bx to M2, mean pressure, MRE-derived stiffness, and thickness increased while circumferential strain decreased significantly (slope test, P ≤ 0.05). Both ED and ES MS had significant positive correlation with (i) mean pressure (ED MS: ρ = 0.56; P = 0.005 and ES MS: ρ = 0.45; P = 0.03); (ii) ED thickness ( ρ = 0.73; P < 0.0001) and ES thickness ( ρ = 0.84; P < 0.0001), respectively; but demonstrated a negative trend with circumferential strain (ED MS: ρ = 0.31 and ES MS: ρ = 0.37). CONCLUSION: This study demonstrated that, in a HTN porcine model, MRE-derived MS increased with increase in pressure and thickness. LEVEL OF EVIDENCE: 1 J. Magn. Reson. Imaging 2017;45:813-820.

In vivo magnetic resonance elastography to estimate left ventricular stiffness in a myocardial infarction induced porcine model.

PURPOSE: To estimate change in left ventricular (LV) end-systolic and end-diastolic myocardial stiffness (MS) in pigs induced with myocardial infarction (MI) with disease progression using cardiac magnetic resonance elastography (MRE) and to compare it against ex vivo mechanical testing, LV circumferential strain, and magnetic resonance imaging (MRI) relaxometry parameters (T1 , T2 , and extracellular volume fraction [ECV]). MATERIALS AND METHODS: MRI (1.5T) was performed on seven pigs, before surgery (Bx), and 10 (D10), and 21 (D21) days after creating MI. Cardiac MRE-derived MS was measured in infarcted region (MIR) and remote region (RR), and validated against mechanical testing-derived MS obtained postsacrifice on D21. Circumferential strain and MRI relaxometry parameters (T2 , T1 , and ECV) were also obtained. Multiparametric analysis was performed to determine correlation between cardiac MRE-derived MS and 1) strain, 2) relaxometry parameters, and 3) mechanical testing. RESULTS: Mean diastolic (D10: 5.09 ± 0.6 kPa; D21: 5.45 ± 0.7 kPa) and systolic (D10: 5.72 ± 0.8 kPa; D21: 6.34 ± 1.0 kPa) MS in MIR were significantly higher (P < 0.01) compared to mean diastolic (D10: 3.97 ± 0.4 kPa; D21: 4.12 ± 0.2 kPa) and systolic (D10: 5.08 ± 0.6 kPa; and D21: 5.16 ± 0.6 kPa) MS in RR. The increase in cardiac MRE-derived MS at D21 (MIR) was consistent and correlated strongly with mechanical testing-derived MS (r(diastolic) = 0.86; r(systolic) = 0.89). Diastolic MS in MIR demonstrated a negative correlation with strain (r = 0.58). Additionally, cardiac MRE-derived MS demonstrated good correlations with post-contrast T1 (r(diastolic) = -0.549; r(systolic) = -0.741) and ECV (r(diastolic) = 0.548; r(systolic) = 0.703), and no correlation with T2 . CONCLUSION: As MI progressed, cardiac MRE-derived MS increased in MIR compared to RR, which significantly correlated with mechanical testing-derived MS, T1 and ECV. LEVEL OF EVIDENCE: 1 J. Magn. Reson. Imaging 2017;45:1024-1033.

Adaptive anisotropic gaussian filtering to reduce acquisition time in cardiac diffusion tensor imaging.

Diffusion tensor imaging (DTI) is used to quantify myocardial fiber orientation based on helical angles (HA). Accurate HA measurements require multiple excitations (NEX) and/or several diffusion encoding directions (DED). However, increasing NEX and/or DED increases acquisition time (TA). Therefore, in this study, we propose to reduce TA by implementing a 3D adaptive anisotropic Gaussian filter (AAGF) on the DTI data acquired from ex-vivo healthy and infarcted porcine hearts. DTI was performed on ex-vivo hearts [9-healthy, 3-myocardial infarction (MI)] with several combinations of DED and NEX. AAGF, mean (AVF) and median filters (MF) were applied on the primary eigenvectors of the diffusion tensor prior to HA estimation. The performance of AAGF was compared against AVF and MF. Root mean square error (RMSE), concordance correlation-coefficients and Bland-Altman's technique was used to determine optimal combination of DED and NEX that generated the best HA maps in the least possible TA. Lastly, the effect of implementing AAGF on the infarcted porcine hearts was also investigated. RMSE in HA estimation for AAGF was lower compared to AVF or MF. Post-filtering (AAGF) fewer DED and NEX were required to achieve HA maps with similar integrity as those obtained from higher NEX and/or DED. Pathological alterations caused in HA orientation in the MI model were preserved post-filtering (AAGF). Our results demonstrate that AAGF reduces TA without affecting the integrity of the myocardial microstructure.

Diffusion Tensor Imaging of Healthy and Infarcted Porcine Hearts: Study on the Impact of Formalin Fixation.

BACKGROUND: Due to complexities of in-vivo cardiac diffusion tensor imaging (DTI), ex-vivo formalin-fixed specimens are used to investigate cardiac remodeling in diseases, and reported results have shown conflicting trends. This study investigates the impact of formalin-fixation on diffusion properties and optimizes tracking parameters based on controls to understand remodeling in myocardial-infarction (MI). METHODS: DTI was performed on 4 healthy (controls) and 4 MI induced formalin-fixed (PoMI) ex-vivo porcine hearts. Controls were scanned pre-fixation (PrCtrl) and re-scanned (PoCtrl) after formalin-fixation. Fractional anisotropy (FA) and apparent diffusion coefficient (ADC) were estimated in all hearts. Tracking parameters (FA, tract termination angle (TTA), fiber-length) were optimized in controls and then used to investigate structural remodeling in PoMI hearts. RESULTS: Fixation increased ADC and decreased FA. PoMI showed increased ADC but decreased FA in infarcted zone compared to remote zone. TTA showed sharp increase in slope from 5°-10°, which flattened after 25° in all groups. Mean fiber-length for different tracking length range showed that PoCtrl had shorter fibers compared to PrCtrl. Fibers around infarction were shorter in length and disarrayed compared to PoCtrl group. CONCLUSION: Formalin-fixation affects diffusion properties and hence DTI parametric trends observed in pathology may be influenced by the fixation process which can cause contradictory findings.

Rapid acquisition technique for MR elastography of the liver.

Magnetic resonance elastography (MRE) of the liver is a novel noninvasive clinical diagnostic tool to stage fibrosis based on measured stiffness. The purpose of this study is to design, evaluate and validate a rapid MRE acquisition technique for noninvasively quantitating liver stiffness which reduces by half the scan time, thereby decreasing image registration errors between four MRE phase offsets. In vivo liver MRE was performed on 16 healthy volunteers and 14 patients with biopsy-proven liver fibrosis using the standard clinical gradient recalled echo (GRE) MRE sequence (MREs) and a developed rapid GRE MRE sequence (MREr) to obtain the mean stiffness in an axial slice. The mean stiffness values obtained from the entire group using MREs and MREr were 2.72±0.85 kPa and 2.7±0.85 kPa, respectively, representing an insignificant difference. A linear correlation of R(2)=0.99 was determined between stiffness values obtained using MREs and MREr. Therefore, we can conclude that MREr can replace MREs, which reduces the scan time to half of that of the current standard acquisition (MREs), which will facilitate MRE imaging in patients with inability to hold their breath for long periods.