Iron-rich sand promoted nitrate reduction in a study for testing of lignite based new slow-release fertilisers.

The N losses and agronomic performances of newly developed slow-releasing fertilisers (SRFs; Epox5 and Poly5) were tested against conventional N fertilisers, urea and diammonium phosphate (DAP), in a climate-controlled lysimeter system. The dry matter (DM) yield and N losses of SRFs were not significantly different from urea and DAP. However, nitrate leaching and nitrous oxide (N2O) losses were unexpectedly low and therefore, it was inferred that nitrate underwent a chemical transformation. It was observed that a thick fibreglass wick interrupted drainage and created an anaerobic condition in the soil. The subsoil was found to have a high extractable total iron and it was postulated that iron played a role in the observed low level of N losses. An investigation was carried out with a factorial design using sand types and rates of N application as the main factors. Two types of sand; with high and low iron concentration and four levels of N applications; 0 (control), 50, 100 and 200 kg N ha-1 were employed in a leaching column and nitrate and N2O losses were measured. The nitrate leaching was significantly (P < 0.05) affected by sand types wherein a lower nitrate level was recorded for high­iron concentration sand than for low-iron concentration sand at all N application levels. The N2O emission was significantly (P < 0.05) lower for high-iron sand than for low-iron sand for the 200 N treatment, but not significantly different between sand types for other treatments. These observations provide evidence for the involvement of iron in nitrate transformation under anaerobic conditions and it was hypothesised path was dissimilar nitrate reduction (DNR). Further studies are recommended, to identify the underlying mechanism responsible for nitrate reduction with iron-rich sand.

The Nitrogen Dynamics of Newly Developed Lignite-Based Controlled-Release Fertilisers in the Soil-Plant Cycle.

The effect of newly developed controlled-release fertilisers (CRFs); Epox5 and Ver-1 and two levels of Fe2+ applications (478 and 239 kg-FeSO4 ha−1) on controlling nitrogen (N) losses, were tested on ryegrass, in a climate-controlled lysimeter system. The Epox5 and Ver-1 effectively decreased the total N losses by 37 and 47%, respectively, compared to urea. Nitrous oxide (N2O) emissions by Ver-1 were comparable to urea. However, Epox5 showed significantly higher (p < 0.05) N2O emissions (0.5 kg-N ha−1), compared to other treatments, possibly due to the lock-off nitrogen in Epox5. The application of Fe2+ did not show a significant effect in controlling the N leaching loss and N2O emission. Therefore, a dissimilatory nitrate reduction and chemodenitrification pathways were not pronounced in this study. The total dry matter yield, N accumulation, N use efficiency and soil residual N were not significantly different among any N treatments. Nevertheless, the N accumulation of CRFs was lower in the first month, possibly due to the slow release of urea. The total root biomass was significantly (p < 0.05) lower for Epox5 (35%), compared to urea. The hierarchical clustering of all treatments revealed that Ver-1 outperformed other treatments, followed by Epox5. Further studies are merited to identify the potential of Fe2+ as a controlling agent for N losses.

Ironsand (Titanomagnetite-Titanohematite): Chemistry, Magnetic Properties and Direct Applications for Wireless Power Transfer.

Ironsand is an abundant and inexpensive magnetic mineral resource. However, the magnetic properties of unprocessed ironsand are often inadequate for any practical applications. In this work, the applicability of ironsand for use as a component in a soft magnetic composite for large-scale inductive power transfer applications was investigated. After magnetic separation, the chemical, structural and magnetic properties of ironsand sourced from different locations were compared. Differences observed in the DC magnetic properties were consistent with changes in the chemical compositions obtained from X-ray Absorption Near-Edge Spectroscopy (XANES), which suggests varying the titanohematite to titanomagnetite content. Increased content in titanomagnetite and magnetic permeability correlated well with the total Fe content in the materials. The best-performing ironsand with the highest permeability and lowest core losses was used alongside Mn,Zn-Ferrite particles (ranging from ∼100 µm to 2 mm) to fabricate toroid cores with varying magnetic material loading. It was shown that ironsand can be used to replace up to 15 wt.% of the magnetic materials with minimal impact on the composite magnetic performance, thus reducing the cost. Ironsand was also used as a supporting material in a single-rail wireless power transfer system, effectively increasing the power transfer, demonstrating potential applications to reduce flux leakage.