Ligand effects in the formation of tertiary carbanions from substituted tertiary aromatic amides.

Reaction of 2-isopropyl-(N,N-diisopropyl)-benzamide 5 with tBuLi in ether results in ortho deprotonation and the formation of a hemisolvate based on a tetranuclear dimer of (5-Li(o))(2)⋅Et(2)O. The solid-state structure exhibits a dimer core in which the amide oxygen atoms fail to stabilize the metal ions but are instead available for interaction with two metalated monomers that reside peripheral to the core. Reaction of 5 with tBuLi in the presence of the tridentate Lewis base PMDTA (N,N,N',N'',N''-pentamethyldiethylenetriamine) takes a different course. In spite of the tertiary aliphatic group at the 2-position in 5, X-ray crystallography revealed that a remarkable benzylic (lateral) deprotonation had occurred, giving the tertiary benzyllithium 5-Li(l)⋅PMDTA. The solid-state structure reveals that amide coordination and solvation by PMDTA combine to distance the Li(+) ion from the deprotonated α-C of the 2-iPr group (3.859(4) Å), thus giving an essentially flat tertiary carbanion and a highly distorted aromatic system. DFT analysis suggests that the metal ion resides closer to the carbanion center in solution. In line with this, the same (benzylic) deprotonation is noted if the reaction is attempted in the presence of tridentate diglyme, with X-ray crystallography revealing that the metal is now closer to the tertiary carbanion (2.497(4) Å). Electrophilic quenches of lithiated 5 have allowed, for the first time, the formation of quaternary benzylic substituents by lateral lithiation.

Extending the family of titanium heterometallic-oxo-alkoxy cages.

Here we investigate the synthesis of high-nuclearity heterometallic titanium oxo-alkoxy cages using the reactions of metal chlorides with [Ti(OEt)(4)] or the pre-formed homometallic titanium-oxo-alkoxy cage [Ti(7)O(4)(OEt)(20)] (A). The octanuclear Ti(7)Co(II) cage [Ti(7)CoO(5)(OEt)(19)Cl] (1) (whose low-yielding synthesis we reported earlier) can be made in better yield, reproducibly by the reaction of a mixture of heptanuclear [Ti(7)O(4)(OEt)(20)] (A) and [KOEt] with [Co(II)Cl(2)] in toluene. A alone reacts with [Co(II)Cl(2)] and [Fe(II)Cl(2)] to form [Ti(7)Co(II)O(5)(OEt)(18)Cl(2)] (2) and [Ti(7)Fe(II)O(5)(OEt)(18)Cl(2)] (3), respectively. Like 1, compounds 2 and 3 retain the original Ti(7) fragment of A and the II-oxidation state of the transition metal ions (Tm). In contrast, from the reaction of [Ti(OEt)(4)] with [Cr(II)Cl(2)] it is possible to isolate [Ti(3)Cr(V)O(OEt)(14)Cl] (4) in low yield, containing a Ti(3)Cr(V) core in which oxidation of Cr from the II to V oxidation state has occurred. Reaction of [Mo(V)Cl(5)] with [Ti(OEt)](4) in [EtOH] gives the Ti(8)Mo(V)(4) cage [{Ti(4)Mo(2)O(8)(OEt)(10)}(2)] (5). The single-crystal X-ray structures of the new cages 2, 3, 4, and 5 are reported. The results show that the size of the heterometallic cage formed can be influenced by the nuclearity of the precursor. In the case of 5, the presence of homometallic Mo-Mo bonding also appears to be a significant factor in the final structure.

Formation and rearrangement of Sn(II) phosphanediide cages.

The room-temperature reactions of Sn(NMe(2))(2) with less sterically demanding primary phosphines (RPH(2)) give the homoleptic phosphanediide compounds [SnPR](n) in high yields (R=tBu (1a), cyclohexyl (1b), 1-adamantyl (1c)). However, the room-temperature reaction of Mes*PH(2) (Mes*=2,4,6-tBu(3)C(6)H(2)) with Sn(NMe(2))(2) gives the model intermediate [{SnPMes*}(2)(mu-NMe(2))SnP(H)Mes*] (3), together with the product of complete deprotonation [SnPMes*](3) (4). Phosphorus--phosphorus bonded products are produced in these reactions at elevated temperatures. If the reaction producing 1a is heated to reflux then [tBuP(H)P(H)tBu] is produced as the major product (together with tin metal). The novel octanuclear cage [{SnPtBu}(7)Sn(PtBu)(3)] (2) can also be isolated in low yield, resulting from formal addition of the heterocyclic stannylene [(tBuP)(3)Sn] to a Sn-P single bond of the intact structure of 1a. Prolonged heating of the reaction producing 3 and 4 leads to the formation of the diphosphene [PMes*](2) (5) and tin metal. The X-ray structures of the heptamer 1a (n=7), octanuclear 2 and trinuclear 3 are reported.

A simple approach to coordination compounds of the pentacyanocyclopentadienide anion.

Deprotonation of [Et(3)NH][C(5)(CN)(5)] with metal bases provides a very simple approach to coordination compounds containing the pentacyanocyclopentadienide anion [C(5)(CN)(5)](-) (1). The three-dimensional polymer [Na(thf)(1.5)(1)](∞) and the molecular dimer [{(tmeda)(2)Na(1)}(2)] are obtained by reaction of this precursor with NaH in the presence of thf or tmeda (Me(2)NCH(2)CH(2)NMe(2)). Their single-crystal X-ray structures both reveal σ-bonded C≡N-Na arrangements and π stacking between [C(5)(CN)(5)](-) ions. DFT calculations on the [C(5)(CN)(5)](-) ion have been used to investigate the structures and bonding in [Na(thf)(1.5)(1)](∞) and [{(tmeda)(2)Na(1)}(2)]. The absence of π bonding of the metal ions in both complexes is due to dispersion of the negative charge from the C(5) ring unit to the C[triple chemical bond]N groups in the [C(5)(CN)(5)](-) ion, making the coordination chemistry of this anion distinctly different from that of cyclopentadienide C(5)H(5)(-).

Single-source materials for metal-doped titanium oxide: syntheses, structures, and properties of a series of heterometallic transition-metal titanium oxo cages.

Titanium dioxide (TiO(2)) doped with transition-metal ions (M) has potentially broad applications in photocatalysis, photovoltaics, and photosensors. One approach to these materials is through controlled hydrolysis of well-defined transition-metal titanium oxo cage compounds. However, to date very few such cages have been unequivocally characterized, a situation which we have sought to address here with the development of a simple synthetic approach which allows the incorporation of a range of metal ions into titanium oxo cage arrangements. The solvothermal reactions of Ti(OEt)(4) with transition-metal dichlorides (M(II)Cl(2), M = Co, Zn, Fe, Cu) give the heterometallic transition-metal titanium oxo cages [Ti(4)O(OEt)(15)(MCl)] [M = Co (2), Zn (3), Fe (4), Cu (5)], having similar MTi(4)(µ(4)-O) structural arrangements involving ion pairing of [Ti(4)O(OEt)(15)](-) anion units with MCl(+) fragments. In the case of the reaction of MnCl(2), however, two Mn(II) ions are incorporated into this framework, giving the hexanuclear Mn(2)Ti(4)(µ(4)-O) cage [Ti(4)O(OEt)(15)(Mn(2)Cl(3))] (6) in which the MCl(+) fragments in 2-5 are replaced by a [ClMn(µ-Cl)MnCl](+) unit. Emphasizing that the nature of the heterometallic cage is dependent on the metal ion (M) present, the reaction of Ti(OEt)(4) with NiCl(2) gives [Ti(2)(OEt)(9)(NiCl)](2) (7), which has a dimeric Ni(µ-Cl)(2)Ni bridged arrangement arising from the association of [Ti(2)(OEt)(9)](-) ions with NiCl(+) units. The syntheses, solid-state structures, spectroscopic and magnetic properties of 2-7 are presented, a first step toward their applications as precursor materials.

Mixed alkylamido aluminate as a kinetically controlled base.

The mechanisms by which directed ortho metalation (DoM) and postmetalation processes occur when aromatic compounds are treated with mixed alkylamido aluminate i-Bu3Al(TMP)Li (TMP-aluminate 1; TMP = 2,2,6,6-tetramethylpiperidide) have been investigated by computation and X-ray diffraction. Sequential reaction of ArC(=O)N(i-Pr)2 (Ar = phenyl, 1-naphthyl) with t-BuLi and i-Bu3Al in tetrahydrofuran affords [2-(i-Bu3Al)C(m)H(n)C(=O)N(i-Pr)2]Li x 3 THF (m = 6, n = 4, 7; m = 10, n = 6, 8). These data advance the structural evidence for ortho-aluminated functionalized aromatics and represent model intermediates in DoM chemistry. Both 7 and 8 are found to resist reaction with HTMP, suggesting that ortho-aluminated aromatics are incapable of exhibiting stepwise deprotonative reactivity of the type recently shown to pertain to the related field of ortho zincation chemistry. Density functional theory calculations corroborate this view and reveal the existence of substantial kinetic barriers both to one-step alkyl exchange and to amido-alkyl exchange after an initial amido deprotonation reaction by aluminate bases. Rationalization of this dichotomy comes from an evaluation of the inherent Lewis acidities of the Al and Zn centers. As a representative synthetic application of this high kinetic reactivity of the TMP-aluminate, the highly regioselective deprotonative functionalization of unsymmetrical ketones both under mild conditions and at elevated temperatures is also presented.

Direct synthesis of the 1,2,3-[C6H4P...P...P]- anion, isoelectronic with the indenyl anion [C6H4CH...CH...CH]-.

The two products obtained from the reaction of 1,2-(PH(2))(2)C(6)H(4) with the mixed-metal base (n)BuLi-Sb(NMe(2))(3) in the presence of 12-crown-4, [Li(12-crown-4)(2)]+[C(6)H(4)P(3)]- (1) and {[Li(12-crown-4)(2)]+}3[Sb(11)]3- (2), represent thermodynamic sinks in which P-P and Sb-Sb bonding are maximized at the expense of P-Sb bonding, providing access to the 1,2,3-[C(6)H(4)P(3)]- phospholide anion.

Synthesis and structure of the Li13 cage [[[O-P(mu-NtBu)]2Li2]3(LiCl)6Li(Cl/OnBu)0.5(thf)7], containing a [O-P(mu-NtBu)]2(2-) dianion.

The hydrolysis of [ClP(mu-NtBu)]2 with H2O-Et3N in thf, followed by in situ lithiation with nBuLi gives the Li13 cage [[[O-P(mu-NtBu)]2Li2]3(LiCl)6Li(Cl/OnBu)0.5(thf)7], containing a [O-P(mu-NtBu)]2(2-) dianion that is isoelectronic with ligands of the type [(RN)P(mu-NR)]2(2-).

Evaluating Clinical Performance of Student Physical Therapists: A Comparison of Student- and Staff-Managed Patient Outcomes After Hip Arthroplasty.

OBJECTIVE: To compare patient outcomes following acute rehabilitation after total hip arthroplasty (THA) of two groups: patients treated by student physical therapists (SPTs) under licensed physical therapist (PT) supervision and by licensed PTs. PARTICIPANTS: Seventy-eight patients with rehabilitation managed by supervised SPTs and 78 treated by licensed PTs. Inclusion criteria were admission between 2010 and 2014, first-time THA, age 55 to 70 yrs, and research consent. METHODS: Retrospective cohort review of electronic health records was conducted. The primary outcome measure was Activity Measure for Post-Acute Care (AM-PAC) 6 Clicks Basic Mobility Short Form. OUTCOMES: Patient base¬line and discharge outcomes measured by AM-PAC 6 Clicks were analyzed with mixed-model analysis of covariance. RESULTS: No significant difference was found in AM-PAC score between patient groups, even after differences in body mass index and session number were controlled. AM-PAC mean (SD) scores of SPT-managed cases changed from 14.5 (2.4) at baseline to 18.2 (2.1) at discharge; of PT-managed cases, from 14.4 (2.4) to 18.2 (2.1). Outcomes were realized in fewer SPT-managed sessions than PT-managed sessions; distance ambulated was significantly greater in the PT-managed group. Discharge locations did not differ. CONCLUSION: AM-PAC scores after THA were equal whether patients were treated by supervised SPTs or licensed PTs.

Pyridyl 'ring-flipping' in the dimers [Me2E(2-py)]2 (E=B, Al, Ga; 2-py=2-pyridyl).

The boron and aluminium dimers [Me2E(micro-py)]2 [E=B (1); Al (2)] are formed as mixtures of two isomers in which the group 13 centres are coordinated by the bridging 2-py ligands in a cis or trans manner, however, in contrast to previous studies, we find that simply heating the mixtures of these isomers of and gives the more thermodynamically stable (synthetically useful) trans isomers exclusively (the trans isomer being the only product in the case of the gallium analogue ).

Ruthenium biimidazole complexes as anion receptors.

The behavior of the compound [RuCl(cym)(H2biim)][BAr'4] (cym = eta6-para-isopropylmethylbenzene, Ar' = 3,5-bis(trifluoromethyl)phenyl), synthesized from [[RuCl(cym)]2(mu-Cl)2], H2biim and NaBAr'4, has been studied as a receptor of anions both in solution and in the solid state.

Isolation and structure of a silicocationic species with 1,3-aryl bridging between silicon atoms: a bis-silylated benzenium ion or a bridging Ph group?

Hydride abstraction from (Me3Si)3CSiMePhH by Ph3C+ affords the cation [(Me3Si)2CSiMe2-Ph-SiMe2]+, which is shown by X-ray crystallography to contain the first structurally characterised example of a Ph group bridging between two silicon atoms.

The folded, tetrameric phosph(III)azane macrocycle [(P(mu-NtBu))2(1,4-(NH)2C6H4)]4.

The tetrameric macrocycle [(P(mu-NtBu))2(1,4-(NH)2C6H4)]4, obtained from the reaction of the phosphazane dimer [ClP(mu-NtBu)]2 with p-phenylenediamine, has an unusual folded conformation in the solid state and contains a roughly tetrahedral arrangement of endo N-H groups for the potential coordination of anions.

Synthesis and structure of the calixarene-like phosph(III)azane macrocycle [{P(mu-N(t)Bu)}2{1,5-(NH)2C10H6}]3.

The reaction of [ClP(mu-NtBu)]2 with 1,5-diamino-naphthalene [1,5-(NH2)2C10H6] in Et3N-thf gives the trimeric macrocycle [{P(mu-NtBu)}2{1,5-(NH)2C10H6}]3(1); the X-ray structure of the toluene solvate 1.3toluene reveals a cone-shaped (calixarene-like) arrangement in which toluene guest molecules are trapped within the cavity.

Highly selective epoxidation of styrene using a transition metal-aluminium(III) complex containing the [MeAl(2-py)3]- anion (2-py = 2-pyridyl).

The reactions of [MeAl(2-py)3Li.thf] (1) with FeCl2 or Cp2Mn in toluene-thf give simple access to the Group 13-transition metal heterometallic complexes [{MeAl(2-py)3}2M][M = Fe (2), Mn (3)]; complex has been shown to be a highly selective styrene epoxidation catalyst in air.

Synthesis and structure of [[MeAl(mu-PMes)(PMes)]2Li4]2 x 7thf, containing a [MeAl(mu-PMes)(PMes)]2(4-) tetraanion (Mes = 2,4,6-Me3C6H2).

The reaction of MeAlCl2 with MesPHLi (1:4 equivalents) in thf/toluene gives the cage complex [[MeAl(mu-PMes)(PMes)]2Li4]2 x 7thf (1), containing an [[MeAl(mu-PMes)(PMes))2]4- tetraanion which is valence-isoelectronic with extensively studied Group 15 anions of the type [E(mu-NR)(NR)]2(2-).

Synthesis of a deca-lithium cage containing an [(RN)2As(mu-NR)As(NR)2]4- tetraanion; a homologue of group 15 trianions of the type [E(NR)3]3-.

The novel, deca-lithium cage [(mtaNHLi)(As2(Nmta)5)-Li(4).2thf]2 (1) (mtaN = 5-methylthiazolyl, C4H4N2S) contains an imido-bridged tetraanion [(mtaN)2As(mu-Nmta)-As(Nmta)2]4-, which represents a new type of multi-functional imido group 15 ligand framework (homologous with group 15 anions of the type [As(NR)3]3-).

Exo-metal coordination by a tricyclic [(P(mu-N-2-NC5H4))2(mu-O)]2 dimer in [(P(mu-N-2-NC5H4))2(mu-O)]2(CuCl x (C5H5N)2)4 (2-NC5H4 = 2-pyridyl, C5H5N = pyridine).

The in situ reaction of the phosphazane dimer [CIP(mu-N-2-NC5H4)]2 (2) with CuCl in the presence of CsH5N/H2O gives the title complex [(P(mu-N-2-NC5H4))2(mu-O)]2(CuCl x (C5H5N)2)4 (1), containing a tricyclic [(P(mu-N-2-NC5H4))2(mu-O)]2 ligand which is isoelectronic with species of the type [(P(mu-NR))2NR]2.

Synthesis and structure of [(Sn(mu-PCy))3(Na x PMDETA)2], containing an electron-deficient [(Sn(mu-PCy))3]2- dianion.

The reaction of CyPHNa with Sn(NMe2)2 in the presence of PMDETA (= (Me2NCH2CH2)2NMe) gives the title compound [(Sn(mu-PCy))3(Na x PMDETA)2] (1), containing an electron-deficient [(Sn(mu-PCy))]3(2-) dianion with a novel two-electron, three centre (2e-3c) bonding arrangement.

Syntheses and magnetic properties of hexanuclear [Cp2Mn3(L1)4]2 and octanuclear [Mn8(L2)12(mu 4-O)2] (L1 = 2-HNC5H5N, L2 = 2-NH-3-Br-5-MeC5H3N, Cp = C5H5).

The reactions of manganocene, Cp2Mn, with 2-aminopyridine (L1H) or 2-amino-3-bromo-5-methylpyridine (L2H) give the novel hexanuclear and octanuclear Mn(II) amido cage compounds [Cp2Mn3(L1)4]2 (1) and [Mn8(L2)12(mu 4-O)2] (2); magnetic measurements on which provide a rare insight into the magnetic properties of amido-bridged metal clusters.