Synthesis and toxicological study of chitosan-pirul (Schinus molle L.) essential oil nanoparticles on Aspergillus flavus.

In recent years, the study of essential oils as antifungal alternatives and their encapsulation to increase their properties for greater effects has been tested. In this work, nanoparticles of chitosan-Schinus molle L. essential oil (CS-PEO-Np) with a size of 260 ± 31.1 nm were obtained by ionic gelation and evaluated in some growth phases of Aspergillus flavus, a toxigenic fungus. At a concentration of 250 µg/mL of CS-PEO-Np, the A. flavus mycelial growth was inhibited at 97.1% with respect to control, at 96 h of incubation; the germination and viability of spores were inhibited at 74.8 and 40%, respectively, after exposure to 500 µg/mL of these nanomaterials, at 12 h of incubation. The fluorescence images of stained spores with DAPI showed the affectations caused by nanoparticles in the cell membrane, vacuoles and vacuolar content, cell wall, and nucleic acids. For both nanoparticles, CS-Np and CS-PEO-Np, no mutagenic effect was observed in Salmonella Typhimurium; also, the phytotoxic assay showed low-to-moderate toxicity toward seeds, which was dependent on the nanoparticle's concentration. The acute toxicity of CS-PEO-Np to A. salina nauplii was considered low in comparison to CS-Np (control), which indicates that the incorporation of Schinus molle essential oil into nanoparticles of chitosan is a strategy to reduce the toxicity commonly associated with nanostructured materials. The nanoparticulated systems of CS-PEO-Np represent an effective and non-toxic alternative for the control of toxigenic fungi such as A. flavus by delaying the initial growth stage.

DEAE/Catechol-Chitosan Conjugates as Bioactive Polymers: Synthesis, Characterization, and Potential Applications.

This work provides the first description of the synthesis and characterization of water-soluble chitosan (Cs) derivatives based on the conjugation of both diethylaminoethyl (DEAE) and catechol groups onto the Cs backbone (Cs-DC) in order to obtain a Cs derivative with antioxidant and antimicrobial properties. The degree of substitution [DS (%)] was 35.46% for DEAE and 2.53% for catechol, determined by spectroscopy. Changes in the molecular packing due to the incorporation of both pendant groups were described by X-ray diffraction and thermogravimetric analysis. For Cs, the crystallinity index was 59.46% and the maximum decomposition rate appeared at 309.3 °C, while for Cs-DC, the values corresponded to 16.98% and 236.4 °C, respectively. The incorporation of DEAE and catechol groups also increases the solubility of the polymer at pH > 7 without harming the antimicrobial activity displayed by the unmodified polymer. The catecholic derivatives increase the radical scavenging activity in terms of the half-maximum effective concentration (EC50). An EC50 of 1.20 µg/mL was found for neat hydrocaffeic acid (HCA) solution, while for chitosan-catechol (Cs-Ca) and Cs-DC solutions, concentrations equivalent to free HCA of 0.33 and 0.41 µg/mL were required, respectively. Cell culture results show that all Cs derivatives have low cytotoxicity, and Cs-DC showed the ability to reduce the activity of reactive oxygen species by 40% at concentrations as low as 4 µg/mL. Polymeric nanoparticles of Cs derivatives with a hydrodynamic diameter (Dh) of around 200 nm, unimodal size distributions, and a negative ζ-potential were obtained by ionotropic gelation and coated with hyaluronic acid in aqueous suspension, providing the multifunctional nanoparticles with higher stability and a narrower size distribution.

Systematic Review and Meta-analysis of Linkage to HIV Care Interventions in the United States, Canada, and Ukraine (2010-2021).

We conducted a systematic review and meta-analysis of interventions targeting linkage to HIV care in the US, Canada, and Europe. We searched six databases (PubMed, Embase, Cochrane Library, Web of Science and CINAHL). Inclusion criteria were English language studies in adults in the US, Canada, or Europe, published January 1, 2010 to January 1, 2021. We synthesized interventions by type and linkage to care outcome. The outcome was cumulative incidence of 3-month linkage. We estimated cumulative incidence ratios of linkage with 95% confidence intervals (CIs). We screened 945 studies; 13 met selection criteria (n = 1 from Canada, n = 1 from Ukraine, n = 11 from the US) and were included after full text review (total 37,549 individuals). The cumulative incidence of 3-month linkage in the intervention group was 0.82 (95% CI 0.68-0.94) and control group 0.71 (95% CI 0.50-0.90); cIR of linkage for intervention versus control was 1.30 (95% CI 1.13, 1.49). Interventions to improve linkage to care after HIV diagnosis warrant further attention.

Extracellular Vesicles and Their Zeta Potential as Future Markers Associated with Nutrition and Molecular Biomarkers in Breast Cancer.

A nutritional intervention promotes the loss of body and visceral fat while maintaining muscle mass in breast cancer patients. Extracellular vesicles (EVs) and their characteristics can be potential biomarkers of disease. Here, we explore the changes in the Zeta potential of EVs; the content of miRNA-30, miRNA-145, and miRNA-155; and their association with body composition and biomarkers of metabolic risk in breast cancer patients, before and 6 months after a nutritional intervention. Clinicopathological data (HER2neu, estrogen receptor, and Ki67), anthropometric and body composition data, and plasma samples were available from a previous study. Plasma EVs were isolated and characterized in 16 patients. The expression of miRNA-30, miRNA-145, and miRNA-155 was analyzed. The Zeta potential was associated with HER2neu (ß = 2.1; p = 0.00), Ki67 (ß = -1.39; p = 0.007), estrogen positive (ß = 1.57; p = 0.01), weight (ß = -0.09; p = 0.00), and visceral fat (ß = 0.004; p = 0.00). miRNA-30 was associated with LDL (ß = -0.012; p = 0.01) and HDL (ß = -0.02; p = 0.05). miRNA-155 was associated with visceral fat (ß = -0.0007; p = 0.05) and Ki67 (ß = -0.47; p = 0.04). Our results reveal significant associations between the expression of miRNA-30 and miRNA-155 and the Zeta potential of the EVs with biomarkers of metabolic risk and disease prognosis in women with breast cancer; particularly, the Zeta potential of EVs can be a new biomarker sensitive to changes in the nutritional status and breast cancer progression.

Chitosan Sensitivity of Fungi Isolated from Mango (Mangifera indica L.) with Anthracnose.

In Mexico, the mango crop is affected by anthracnose caused by Colletotrichum species. In the search for environmentally friendly fungicides, chitosan has shown antifungal activity. Therefore, fungal isolates were obtained from plant tissue with anthracnose symptoms from the state of Guerrero in Mexico and identified with the ITS and ß-Tub2 genetic markers. Isolates of the Colletotrichum gloeosporioides complex were again identified with the markers ITS, Act, ß-Tub2, GADPH, CHS-1, CaM, and ApMat. Commercial chitosan (Aldrich, lot # STBF3282V) was characterized, and its antifungal activity was evaluated on the radial growth of the fungal isolates. The isolated anthracnose-causing species were C. chrysophilum, C. fructicola, C. siamense, and C. musae. Other fungi found were Alternaria sp., Alternaria tenuissima, Fusarium sp., Pestalotiopsis sp., Curvularia lunata, Diaporthe pseudomangiferae, and Epicoccum nigrum. Chitosan showed 78% deacetylation degree and a molecular weight of 32 kDa. Most of the Colletotrichum species and the other identified fungi were susceptible to 1 g L-1 chitosan. However, two C. fructicola isolates were less susceptible to chitosan. Although chitosan has antifungal activity, the interactions between species of the Colletotrichum gloeosporioides complex and their effect on chitosan susceptibility should be studied based on genomic changes with molecular evidence.

Synthesis and experimental/computational characterization of sorghum procyanidins-gelatin nanoparticles.

In this research, sorghum procyanidins (PCs) and procyanidin B1 (PB1) were encapsulated in gelatin (Gel) to form nanoparticles as a strategy to maintain their stability and bioactivity and for possible applications as inhibitors of metalloproteinases (MMPs) of the gelatinase type. Encapsulation was carried out by adding either PCs or PB1 to an aqueous solution of A- or B-type Gel (GelA or GelB) at different concentrations and pH. Under this procedure, the nanoparticles PCs-GelA, PCs-GelB, PB1-GelA, and PB1-GelB were synthesized and subsequently characterized by experimental and computational methods. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that all types of nanoparticles had sizes in the range of 22-138 nm and tended to adopt an approximately spherical morphology with a smooth surface, and they were immersed in a Gel matrix. Spectral analysis indicated that the nanoparticles were synthesized by establishing hydrogen bonds and hydrophobic interactions betweenGel and the PCs or PB1. Study of simulated gastrointestinal digestion suggested that PCs were not released from the Gel nanoparticles, and they maintained their morphology (SEM analysis) and antioxidant activity determined by Trolox-equivalent antioxidant capacity (TEAC) assay. Computational characterization carried out through molecular docking studies of PB1 with Gel or (pro-)metalloproteinase-2 [(pro-)MMP-2], as a model representative of the PCs, showed very favorable binding energies (around -5.0 kcal/mol) provided by hydrogen bonds, van der Waals interactions, and desolvation. Additionally, it was found that PB1 could act as a selective inhibitor of (pro-)MMP-2.

Interaction of Squid (Dosidicus giga) Mantle Protein with a Mixtures of Potato and Corn Starch in an Extruded Snack, as Characterized by FTIR and DSC.

The majority of snacks expanded by extrusion (SEE) are made with vegetable sources, to improve their nutritional content; it has been proposed to incorporate squid (Dosidicus gigas), due to its high protein content, low price and high availability. However, the interaction of proteins of animal origin with starch during extrusion causes negative effects on the sensory properties of SEE, so it is necessary to know the type of protein-carbohydrate interactions and their effect on these properties. The objective of this research was to study the interaction of proteins and carbohydrates of SEE elaborated with squid mantle, potato and corn. The nutritional composition and protein digestibility were evaluated, Fourier transform infrared (FTIR) and Differential Scanning Calorimetry (DSC) were used to study the formation of protein-starch complexes and the possible regions responsible for their interactions. The SEE had a high protein content (40-85%) and biological value (>93%). The melting temperature (Tm) was found between 145 and 225 °C; the Tm values in extruded samples are directly proportional to the squid content. The extrusion process reduced the amine groups I and II responsible for the protein-protein interaction and increased the O-glucosidic bonds, so these bonds could be responsible for the protein-carbohydrate interactions.

Ultrasound as a potential tool for the assessment of interstitial lung disease in rheumatic patients. Where are we now?

Lung ultrasound (LUS) achieved an intriguing role in the management of pulmonary involvement in patients affected by connective tissues diseases (CTDs). Few studies have been performed to support its usefulness in the evaluation of the presence and the severity of interstitial lung disease (ILD), relating it to the information obtained with chest high-resolution computed tomography (HRCT). These results open up new fields of research in order to demonstrate the utility of LUS as screening tool to evaluate ILD in CTD. The aim of this review is to provide the "state of the art" of the role of LUS in the management of ILD associated with CTD.

Rheology and microstructure of gels based on wheat arabinoxylans enzymatically modified in arabinose to xylose ratio.

BACKGROUND: Arabinoxylans (AX) are polysaccharides consisting of a backbone of xyloses with arabinose substituents ester-linked to ferulic acid (FA). The arabinose to xylose ratio (A/X) in AX may vary from 0.3 to 1.1. AX form covalent gels by cross-linking of FA but physical interactions between AX chains also contribute to the network formation. The present study aimed to investigate the rheological and microstructural characteristics of gels based on AX enzymatically modified in A/X. RESULTS: Tailored AX presented A/X ranging from 0.68 to 0.51 and formed covalent gels. Dimers of FA content and elasticity (G') increased from 0.31 to 0.39 g kg-1 AX and from 106 to 164 Pa when the A/X in the polysaccharide decreased from 0.68 to 0.51. Atomic force microscopy images of AX gels showed a sponge-like microstructure at A/X = 0.68, whereas, at lower values, gels presented a more compact microstructure. Scanning electron microscopy analysis of AX gels show an arrangement of different morphology, passing from an imperfect honeycomb (A/X = 0.68) to a flake-like microstructure (A/X = 0.51). CONCLUSION: Lower A/X values favor the aggregation of AX chains resulting in an increase in di-FA content, which improves the rheological and microstructural characteristics of the gel formed. © 2017 Society of Chemical Industry.

Protein/arabinoxylans gels: effect of mass ratio on the rheological, microstructural and diffusional characteristics.

Wheat bran arabinoxylan (WBAX) gels entrapping standard model proteins at different mass ratios were formed. The entrapment of protein affected the gel elasticity and viscosity values, which decreased from 177 to 138 Pa. The presence of protein did not modify the covalent cross-links content of the gel. The distribution of protein through the network was investigated by confocal laser scanning microscopy. In mixed gels, protein aggregates forming clusters were detected at protein/polysaccharide ratios higher than 0.25. These clusters were not homogeneously distributed, suggesting that WBAX and protein are located in two different phases. The apparent diffusion coefficient (Dm) of proteins during release from mixed gels was investigated for mass ratios of 0.06 and 0.12. For insulin, Dm increased significantly from 2.64 × 10-7 to 3.20 × 10-7 cm2/s as the mass ratio augmented from 0.06 to 0.12. No significant difference was found for Dm values of ovalbumin and bovine serum albumin released from the mixed gels. The results indicate that homogeneous protein/WBAX gels can be formed at low mass ratios, allowing the estimation of Dm by using an analytical solution of the second Fick's law.

Entrapment of probiotics in water extractable arabinoxylan gels: rheological and microstructural characterization.

Due to their porous structure, aqueous environment and dietary fiber nature arabinoxylan (AX) gels could have potential applications for colon-specific therapeutic molecule delivery. In addition, prebiotic and health related effects of AX have been previously demonstrated. It has been also reported that cross-linked AX can be degraded by bacteria from the intestinal microbiota. However, AX gels have not been abundantly studied as carrier systems and there is no information available concerning their capability to entrap cells. In this regard, probiotic bacteria such as Bifidobacterium longum have been the focus of intense research activity lately. The objective of this research was to investigate the entrapment of probiotic B. longum in AX gels. AX solution at 2% (w/v) containing B. longum (1 × 107 CFU/cm) formed gels induced by laccase as cross-linking agent. The entrapment of B. longum decreased gel elasticity from 31 to 23 Pa, probably by affecting the physical interactions taking place between WEAX chains. Images of AX gels containing B. longum viewed under a scanning electron microscope show the gel network with the bacterial cells entrapped inside. The microstructure of these gels resembles that of an imperfect honeycomb. The results suggest that AX gels can be potential candidates for the entrapment of probiotics.

Enzyme-catalyzed transesterification of galactomannan extracted from mesquite seed (Prosopis velutina) with vinyl carboxylate esters.

Galactomannans (GM) are hemicellulosic polysaccharides composed of D-mannopyranose chains linked by ß (1 â†’ 4) glycosidic linkages with branches of D-galactopyranose linked by α (1 â†’ 6) linkages. This polysaccharide is recognized for its hydrophilic character, as it is rich in hydroxyl groups (-OH). This chemical characteristic, combined with the absence of ionic charges, enables structural modifications such as transesterification of the fatty acid chains (FA), which provides a strategy for obtaining amphiphilic structures. The enzyme-catalyzed syntheses were carried out in DMSO with GM decanoate (GMD) and GM palmitate (GMP) at different molar ratios (0.5 and 1.0) and the resulting structures were evaluated with infrared spectroscopy (FTIR), solid-state nuclear magnetic resonance (CP/MAS 13C NMR) and differential scanning calorimetry (DSC). The FTIR spectrum confirmed the transesterification of GM with the appearance of a C[bond, double bond]O band (1730-1750 cm-1). These results were confirmed by the signals observed at 177 and 30 ppm in the CP/MAS 13C NMR spectrum, which corresponded to the C[bond, double bond]O groups of the esters and the terminal -CH3 groups of the FA chains, respectively. Finally, DSC showed glass transition temperatures (Tg) in the range 43-51 °C, while the melting temperatures (Tm) of the GM esters (59 °C) were not affected by different degrees of esterification (DE) for GMD (0.37 and 0.71) and GMP (0.47 and 0.57).

Cellular Internalization and Toxicity of Chitosan Nanoparticles Loaded with Nobiletin in Eukaryotic Cell Models (Saccharomyces cerevisiae and Candida albicans).

This study involved the synthesis and characterization of chitosan nanoparticles loaded with nobiletin (CNpN) and assessed their toxicity and cellular internalization in eukaryotic cell models (Saccharomyces cerevisiae and Candida albicans). Nanoparticles were prepared via the nanoprecipitation method and physicochemically characterized to determine their hydrodynamic diameter using dynamic light scattering (DLS), their surface charge through ζ-potential measurements, and their chemical structure via Fourier-transform infrared spectroscopy (FTIR). The hydrodynamic diameter and ζ-potential of chitosan nanoparticles (CNp) and CNpN were found to be 288.74 ± 2.37 nm and 596.60 ± 35.49 nm, and 34.51 ± 0.66 mV and 37.73 ± 0.19 mV, respectively. The scanning electron microscopy (SEM) images displayed a particle size of approximately 346 ± 69 nm, with notable sphericity for CNpN. FTIR analysis provided evidence of potential imine bonding between chitosan and nobiletin. Membrane integrity damage could be observed in both S. cerevisiae and C. albicans yeast stained with propidium iodide, demonstrating membrane integrity damage caused by CNp and CNpN, where higher concentration treatments inhibited the development of yeast cells. These findings suggest a selective therapeutic potential of CNpN, which could be promising for the development of antifungal and anticancer therapies. This study contributes to understanding the interaction between nanoparticles and eukaryotic cells, offering insights for future biomedical applications.

Study of the Thermal Phase Transition of Poly(N,N-diethylacrylamide-co-N-ethylacrylamide) Random Copolymers in Aqueous Solution.

N-alkyl-substituted polyacrylamides exhibit a thermal coil-to-globule transition in aqueous solution driven by an increase in hydrophobic interactions with rising temperature. With the aim of understanding the role of N-alkyl substituents in the thermal transition, this study focuses on the molecular interactions underlying the phase transition of poly(N,N-diethylacrylamide-co-N-ethylacrylamide) random copolymers. Poly(N,N-diethylacrylamide) (PDEAm), poly(N-ethylacrylamide) (PNEAm), and their random copolymers were synthesized by free radical polymerization and their chemical structure characterized spectroscopically. It was found that the values of the cloud-point temperature increased with PNEAm content, and particle aggregation processes took place, increasing the negative charge density on their surface. The cloud-point temperature of each copolymer decreased with respect to the theoretical values calculated assuming an absence of interactions. It is attributed to the formation of intra- and interchain hydrogen bonding in aqueous solutions. These interactions favor the formation of more hydrophobic macromolecular segments, thereby promoting the cooperative nature of the transition. These results definitively reveal the dominant mechanism occurring during the phase transition in the aqueous solutions of these copolymers.

Physicochemical characterization of pectin and mango peel (Mangifera indica L.) from Mexican cultivars.

In Mexico, about 40 % of the mango harvest is lost due to marketing problems. Moreover, the mango industry generates peel and seed waste that ranges from 35 to 60 % of the total weight of processed fruits. This unexploited mango biomass represents a potential resource for producing value-added by-products. A market alternative is exploiting the mango peel as a source of biofunctional compounds, such as pectin. This hydrocolloid has applications in the pharmaceutical, cosmetic, and food industries. This study quantified the peel components of the Ataulfo, Panameño, Manila, and Haden cultivars. The mango peel showed a considerable input of dietary fiber (37-45 % DM), minerals (1018-2156 mg/100 g DM), phenols (2123-4851 mg gallic acid equivalent/100 g DM), flavonoids (0.74-2.7 mg quercetin equivalent/g DM) and antioxidant capacity (375-937 µM Trolox equivalent/g DM). The four cultivars presented high methoxyl pectins (66-71 %). The molecular weight of the pectins analyzed was from 957 to 4859 kDa. The Panameño cultivar showed the highest amount of pectin and viscosity concerning the peel of the other cultivars and a higher content of glucomannans (≈28.21 %). The pectin of the Haden cultivar was the only one with arabinoxylans since xylose was not detected in the pectin of the other cultivars. The chemical characteristics of the studied mango peels are promising for their industrialization.

Optimization of the Encapsulation of Vitamin D3 in Oil in Water Nanoemulsions: Preliminary Application in a Functional Meat Model System.

Meat products containing Vitamin D3 (VD3) are an innovative option that could contribute to reducing deficiencies in this micronutrient. Designing nanoemulsions that carry VD3 is the first step in developing functional meat products. Thereby, this study investigated the impact of food components on the nanoemulsion properties. A central composite design was used to study the effects of pea protein (PP, 0.5-2.5%), safflower oil (SO, 5-15%), and salt (0-0.5%) on the nanoemulsion stability (ζ-potential and particle size) and the VD3 retention. Also, the optimized nanoemulsion carrying VD3 was incorporated into a meat matrix to study its retention after cooking. The combination of food components in the optimized nanoemulsion were SO = 9.12%, PP = 1.54%, and salt content = 0.4%, resulting in the predicted values of ζ-potential, particle size, and VD3 retention of -37.76 mV, 485 nm, and 55.1%, respectively. The VD3 that was nanoencapsulated and included in a meat product remained more stable after cooking than the VD3 that was not encapsulated. If a meat product is formulated with 5 or 10% safflower oil, the stability of the nanoencapsulated VD3 is reduced. This research contributes to developing functional meat products carrying nanoencapsulated vitamin D3 in natural food-grade components.

Development of hybrid MIL-53(Al)@CBS for ternary adsorption of tetracyclines antibiotics in water: Physical interpretation of the adsorption mechanism.

In this study, a hybrid material, MIL-53(Al)@CBS, was synthesized via the solvothermal method, involving the growth of MIL-53(Al) crystals on cocoa bean shell residues (CBS). Physicochemical characterization techniques, including TGA, BET, FTIR, XRD, and SEM, confirmed successful hybridization. MIL-53(Al)@CBS was employed as an adsorbent for antibiotics (oxytetracycline, tetracycline, chlortetracycline) separation from aqueous solutions. Parameters like pH, adsorbent dose, concentration, time, and temperature were systematically evaluated. FTIR revealed π-π interactions and hydrogen bonds between tetracyclines and the adsorbent. MIL-53(Al)@CBS exhibited adsorption, with removal rates up to 98.92%, 99.04%, and 98.24% for OTC, TC, and CTC, respectively. Kinetics suggested adsorption depends on active site availability, with TC adsorbing fastest. Microscopic models showed adsorption on three distinct active site types with different affinities without competition or adherence to the Langmuir hypothesis. Importantly, MIL-53(Al)@CBS maintained high adsorption capacity even after ten washing cycles, highlighting its potential for water treatment.

Characterization of water extractable arabinoxylans from a spring wheat flour: rheological properties and microstructure.

In the present study water extractable arabinoxylans (WEAX) from a Mexican spring wheat flour (cv. Tacupeto F2001) were isolated, characterized and gelled and the gel rheological properties and microstructure were investigated. These WEAX presented an arabinose to xylose ratio of 0.66, a ferulic acid and diferulic acid content of 0.526 and 0.036 µg/mg WEAX, respectively and a Fourier Transform Infra-Red (FT-IR) spectrum typical of arabinoxylans. The intrinsic viscosity and viscosimetric molecular weight values for WEAX were 3.5 dL/g and 504 kDa, respectively. WEAX solution at 2% (w/v) formed gels induced by a laccase as cross-linking agent. Cured WEAX gels registered storage (G') and loss (G'') modulus values of 31 and 5 Pa, respectively and a diferulic acid content of 0.12 µg/mg WEAX, only traces of triferulic acid were detected. Scanning electron microscopy analysis of the lyophilized WEAX gels showed that this material resembles that of an imperfect honeycomb.

Arabinoxylan microspheres: structural and textural characteristics.

The aim of this research was to study the structural and textural characteristics of maize bran arabinoxylan (MBAX) microspheres. The laccase-induced cross-linking process was monitored by storage (G') and loss (G'') moduli changes in a 4% (w/v) MBAX solution. The G' and G'' values at the plateau region were 215 and 4 Pa, respectively. After gelation, the content of ferulic acid dimers decreased from 0.135 to 0.03 µg/mg MBAX, suggesting the formation of ferulated structures unreleased by mild alkaline hydrolysis. MBAX microspheres presented an average diameter of 531 µm and a swelling ratio value (q) of 18 g water/g MBAX. The structural parameters of MBAX microspheres were calculated from equilibrium swelling experiments, presenting an average mesh size of 52 nm. Microstructure and textural properties of dried MBAX microspheres were studied by scanning electron microscopy and nitrogen adsorption/desorption isotherms, respectively, showing a heterogeneous mesoporous and macroporous structure throughout the network.